Grid Control with Oracle XE?

I've just installed Oracle Express Edition and looks great. Can i connect it to a management server (grid control)?

As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

Similar Messages

  • Inference control with oracle

    Hi,
    I need for my master thesis a possibility to realize inference control with oracle.
    For example exist an instance R like
    R   |   A    B    C
        |  a1   b1   c1
        |  a2   b1   c2
    and a secrecy such *(exists X) R(a1, b1, X)*. With VPD under column hiding can defined this secrecy so that the data combination *(A:a1, B:b1)* be hidden from the instance:
    R   |  A    B    C
        |            c1
        |  a2  b1   c2
    The Problem is that a safe query like *(exists X)(exists Y) R(a1, X, Y)* was not answered, when the user makes a query
    select A from R where A=a1;
    Cause this query is a safe query with respect to the secrecy, the answer must not be hidden.
    Safe means
    *(exists X)(exists Y) R(a1, X, Y) NOT MODELS OF (exists X) R(a1, b1, X)*.
    How can I avoid this.
    I tried to avoid that whit using "query rewriting" and "materialized view", but that was not successfull, because oracle doesn't rewrite the simple (without Aggregates and Joins) queries.
    It will be greate when someone has an idea!
    Thanks

    As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
    Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

  • 11g Grid Control with Dataguard

    Hi ,
    I need to configure a 11g Grid Control with Dataguard for the repository, are there any documents that i can follow for configuring the dataguard
    for the Grid Control 11g, I am interested as how i would be setting up the tns entry in the OMS , since i had to do the failover / switchover etc of OEM Grid Control application across the standby .
    Kind regards
    Krish

    Hi,
    Please follow the document provided below:
    How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
    Let me know, if you are looking for the same document.
    Best Regards,
    Venkat

  • Suggested concept for Grid Control with DataGuard solution

    Hello,
    I want a Disaster Recovery solution for OEM Grid Control with DataGuard but with only one OMS running. (11.1)
    I have figured out the following.
    Installation OEM Grid control om host A. Repository is created on Host A. Connection to database is done thru servicename DBGRDSRV on Host A
    Installation OEM Grid control om host B. Repository is created on Host B. Connection to database is done thru servicename DBGRDSRV on Host B
    I stop OMS on host B and I drop the database on Host B
    Then....
    I create a Dataguard configuration for DBGRDSRV, the prim database run on Host A en secondary on Host B
    In case of a failure i switch the database. On host B i will have DBGRDSRV as the primary database
    I start OMS on host B and the agent.
    In case the failure is resolved i switch back eveything
    Will thos concept work?
    Do i get some troubles with the emkey, and if so, does anybody has a solution for this?
    Any help is appreciated
    Regards,
    Jaap
    Edited by: user9956284 on 28-jul-2011 10:44

    Hi,
    Please follow the document provided below:
    How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
    Let me know, if you are looking for the same document.
    Best Regards,
    Venkat

  • Grid control with combo cell

    Does Anybody have some information about grid
    control/oracleSpreadTable with combo list instead of text cell.
    Please help!!
    null

    As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
    Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

  • ITANIUM Grid Control and Oracle 10.2.0.3 update

    QA and PROD databases were installed as 10.2.0.1 on Itanium servers.
    QA was taken to 10.2.0.3 two weeks ago.
    Grid Control AGENT was applied to QA early last week.
    QA database continues to perform
    PROD was not taken to 10.2.0.3
    Grid Control AGENT was applied to PROD early last week.
    PROD continued to perform.
    THIS MORNING applying 10.2.0.3 upgrade to PROD: Installation set passed Deinstall and Install then at LINKING returned "Error in invoking target 'client_sharedlib" of makefile '/oracle/CDWP/orahome/nedtwork/lib/ins_net_client.mk" See '/home...log'. Examining the log led to libclntsh.so.10.1 WITH ZERO FILESIZE LENGTH. Further testing had repeated results.
    THIS THREAD WILL BE PLACED IN ENTERPRISE MANAGER AND METALINK.
    It appears the ITANIUM GRID CONTROL release was not well QC'd. I am FORCED to recover the PROD database from backup.
    ANYONE with any insight on how to install 10.2.0.3 AFTER Grid Control please respond.

    Hi Rob Zoeteweij
    This is the output of command "emctl status agent" .
    $ emctl status agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
    Agent Version     : 10.2.0.5.0
    OMS Version       : 10.2.0.5.0
    Protocol Version  : 10.2.0.5.0
    Agent Home        : /opt/app/oracle/product/agent10g
    Agent binaries    : /opt/app/oracle/product/agent10g
    Agent Process ID  : 11715
    Parent Process ID : 11680
    Agent URL         : https://oracledev.test.com:3872/emd/main/
    Repository URL    : https://oracledev.test.com:1159/em/upload
    Started at        : 2010-09-06 11:06:28
    Started by user   : em10g
    Last Reload       : 2010-09-06 11:06:28
    Last successful upload                       : (none)
    Last attempted upload                        : (none)
    Total Megabytes of XML files uploaded so far :     0.00
    Number of XML files pending upload           :      577
    Size of XML files pending upload(MB)         :    22.89
    Available disk space on upload filesystem    :    31.20%
    Last attempted heartbeat to OMS              : 2010-09-06 11:06:39
    Last successful heartbeat to OMS             : unknown
    Agent is Running and Ready

  • Oracle Grid Control and Oracle Application Management Pack for Siebel

    I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
    An error occured while adding Siebel Enterprise.
    Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.test

    Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
    Btw, I take that you are stuck in the step in which you:
    - Click the "Add Enterprise" button to add the enterprise
    - Fill in the 7 parameters
    - Click Ok to start the discovery process
    Which release of Siebel and Enterprise Manager are you using?
    Chung

  • 10gR2 Grid Control with previous Agents?

    I have 10gR2 Grid Control installed on a Linux Server. I want to use it to create a DataGuard standby database. The issue is that the primary database is 10gR2 on a HP-UX server using ASM and the standby database will also be 10gR2 on a HP-UX server using ASM. Will the 10gR2 Linux Grid Control be able to handle this since the agent on the primary will be 10.1.0.4? Note: 10gR2 is available for HP-UX but 10gR2 Grid Control is not yet available so that is why I have 10.1.0.4 agent.

    Yes , it is able to handle

  • Set up grid control for Oracle application 11i

    Hi,
    I want to set up the grid control for his/her application 11i.
    Our system is on 11.5.10.2 and the database is 10.1.0.4
    Is there any good documentation for this?
    Thanks,
    Lily

    Yes, please have a look at Metalink Note 308320.1.
    Cheers,
    B.

  • Installing Grid control with existing IAS

    Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?

    yes u can install Grid control into existing Application Server installation

  • Third party ocx controls with oracle 6i forms

         I would appreciate if anyone can get the solution on how to work with the ocx controls on the oracle forms.i am doing the same thing and when I embed the ocx control on the form during design time and then execute it then the ocx control is lost during run time as I have to insert the object on the oracle form during the run time again and then how do I call the functions of the ocx ?please guide me at the earliest.thank you.

    Firstly upgrade to the latest patch of 6i, early version of 6i have a bug where OCX licence information is not correctly stored with the container, so in some cases the control will not instanciate at runtime.
    To call functions in the control, the simplest thing to do is to use the OLE Importer (MENU: Program -> Import OLE Library Interfaces). Choose the class of your control and Forms will generate you a PL/SQL package to call all the functions in the control.
    The rest is up to you - you have to know the API of the control you are using.

  • Filespace Available Metric in Grid Control with CDROMs mounted

    I getting tried of filespace available alerts being generated against cdrom drives on our Sun Server. Is there are way for Grid to ignore cdroms that are mounted.

    You should be aware of the following:
    When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
    The alert should then be shown as soon as your UDM thresholds values are reached.
    The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
    So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
    If you don't see this, then there is something wrong with you UDM definition.
    If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
    Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
    Regards
    Rob
    http://oemgc.wordpress.com

  • Userdefined metrics in grid control with OEM

    Hi,
    i created a user defined metric to check the size of perticular tablespace, as for that
    i wrote a query like select bytes/1024/1024 from dba_data_files where tablespace_name like 'tablespacename'
    my query is giving output :100mb
    i gave the threshold values like operator= '=', warning = '100', critical = 110. to tset my alert will fire or not
    iam not specified any response action for this,
    when iam testing it willcollect the value is 100mb, successful.
    but my alert is not firing.
    can anybody help me out regarding this issue

    You should be aware of the following:
    When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
    The alert should then be shown as soon as your UDM thresholds values are reached.
    The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
    So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
    If you don't see this, then there is something wrong with you UDM definition.
    If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
    Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
    Regards
    Rob
    http://oemgc.wordpress.com

  • OEM Grid Control with vmware

    We've just purchased OEM. We plan 2 installs - one on a development server to monitor development dbs, the other a production server to monitor production dbs. Our technical group wants me to install it on one Windows 2003 Server using vmware giving me 2 virtual servers. This way they only have to purchase 1 physical server yet I get the 2 installs I want. Oracle support said they wouldn't support this type of install.
    Has anyone done this?

    Yes, I have exactly the same setting. Works like a charm, but it does need some hefty resources. As this is only a test setting on my laptop I do not expect much support.
    Maybe you should not mention that you run this on vmware when you have a support question ;-)
    cu
    Andreas

  • Enterprise Manager Grid Control - SSH not working on Windows

    Hi,
    We tried the below steps to install EM Grid control on our Windows servers.
    • Oracle Application Grid Control with Oracle Management Agent has been installed successfully on Server1.
    • As part of prerequisites for Agent installation using Agent Deployment Wizard, we have installed Cygwin in both the boxes – SOA box (Server2) and Grid control box (Server1) for SSH communication. However, the agent installation failed and the service in SOA box failed to start. We tried re-installation of Cygwin but unable to bring up Cygwin service.
    • We have installed SOA suite in another box (Server3) and then installed Cygwin. Cygwin installation was successful and all previous issues were resolved.
    However, SSH communication is getting failed because of the error "User Authentication failed on remote nodes:Server3. Either the provided username and password is incorrect or Password Authentication is disabled for the sshd daemon on the remote nodes. To enable Password Authentication set the property PasswordAuthentication to "yes" in the SSHD Configuration File (sshd_config) on the remote nodes".
    We are able to achieve SSH communication when we manually try it through Cygwin Bash Shell.
    Any pointers in resolving this would be highly appreciated.
    regards,
    Satyajith
    Edited by: 817555 on Dec 12, 2010 10:11 PM

    I couldn't get to work either so I left the ssh configuration out and went on with 'silent' installation which worked like a charm and oem discovered it right away. Be sure change the parameters according to your environment in 'additional_agent.rsp' file and use that to run the silent installation. You may have to add one additional parameter manually about agent home location, look in the documentation for the exact parameter name. Hope this helps, Viral.

Maybe you are looking for

  • Safari 7.0 and OWA 2010: constant reload warnings

    That's what I see randomly, every few minutes, while using Outlook Web App (OWA) 2010. It makes using OWA virtually impossible because the page will reload in the midst of typing a mail message, losing the work in progress. Some details: No other win

  • Dup2 after fork in multithreaded application

    I am working on a multithreaded application (C++) that must create several Java processes and capture their output though pipes. For a single threaded application, I know it is possible to call dup2 (in the child) after the fork to set up the proper

  • PLS-00327 when updating table from a remote table inside a PLSQL procedure

    Hi, Inside a PL/SQL procedure,I want to update a table from a remote table : begin UPDATE rachel1 set NEW_TEN_CODE = (SELECT NEW_TEN_CODE FROM rachel@REFI WHERE rachel1.OLD_TEN_CODE=rachel.OLD_TEN_CODE@REFI); end; I receive the error : PLS-00327: "RA

  • Keynot '08: "Move" Action to scroll text

    Sorry for this stupid question, but I'm baffled as to how to use the Action "Move". I have a block of text I want to scroll from the bottom to the top of the page. The little "Option Click the Selected Path" "hint" just isn't very helpful. Can anyone

  • Iphoto doesn't find photos

    i can't view my photos in iPhoto. my storage says i have 60gb of photos but they don't show anywhere. i have looked in finder/user/pictures/iphoto library (which is only 1.3gb in size) but no luck. i have 'shown package contents' which reveals only 3