Grid installation in solaris 10 (sparc) with Suncluster

While installing grid for cluster, node information table appears as blank.. while clicking "use cluster configuration file" option in that screen it shows that vendor clusterware detected. cluster configuration cannot be modified..
If anyone knows how to resolve this problem, please post ur solution or if you have any procedure to install 11g r2 Grid infrastructure for a cluster in Solaris 10 sparc os with sun cluster 3.2, please send me the document to my email id- [email protected]

I would suggest changing the media you burned it on. That always seems to be the issue with things like this. Search the forums for suggestions on what works.

Similar Messages

11gR2 installation on Solaris failed with prereuisite 124861-15

The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.

Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Installing OEM Grid Control on Solaris Sparc using an existing database

During installing OEM 10g on Solaris, after select "using an existing database" the connect string for database (host:port:sid) never is solicited and the path for datafiles neither, then the installation cancel.
On Windows, this type of installation in the same version work fine!
1_ How I do to install OEM 10g on Solaris using an existing db?
Tx,
Diego.

Have you installed the Management Agent for the target database?

BOE 3.1 SR3 on Solaris SPARC - how to for Int kit for SAP Solutions ?

Hi,
this is my first BOE installation and I've just installed the BOE SR3 Enterprise Server on Solaris SPARC with SAP WAS 7.0 and Oracle 11.2.0.2 providing the CMS database location and the Java application server for the BOE applications.
The installation went ok and all BOE Server services are running. I've now got to install the XI 3.1 SR3 BOBJ Integration for SAP Solutions kit and have read the installation and administration guide for this.
The pre-requisites state that the SAP RFC & Java Connector needs to be put in place before deploying. Are these not part of the NW 7 WAS 7.0 Java Server anyway ?
If anyone has any pointers to more detailed instructions for doing Integration for SAP solutions kit other than the guide then please let me know.
Regards,
Brian.

Hello Ingo,
many thanks for your reply, although I'm still confused. My Business Objects 3.1 Enterprise Server runs on the same host as a NW 7 WAS and has it's applications deployed and running on the NW 7 WAS Java instance .According to OSS 549268 you should not use the standalone SAP JCO connector if your applications are running on a SAP WAS - it has it's own integrated SAP Java Connector
"SAP JCo is available for two different environments: there is the standalone version and the version integrated in the SAP J2EE Engine. These two JCo variants have a compatible API but are implemented differently, so you may not mix them together within one environment.
SAP JCo 2.1 is the standalone version and can be used in all Java applications not running in an SAP J2EE Engine environment.
So it seems I don't need to use the standalone Java connector ?
Regards,
Brian.

Step by Step RAC 11GR2 with Grid Infrastructure on Solaris installation

Y'ello All,
Please I need documentation for RAC 11GR2 with Grid Infrastructure on Solaris installation urgently.
Thany you very much for your support
BR,

What type of shared storage will you be using?
Properly configure DNS
Properly configure /etc/hosts files
Properly configure SCAN
Properly configure SHARED storage (Preferably ASM - "raw" devices) - make sure you partition the disk devices to "skip" the first 1MB of the device)
BEFORE installation, confirm grid-owner and oracle-rdbms-owner can read AND write to these shared devices from ALL nodes. Permissions must be set to <grid-owner:<grid+oracle shared group> (grid:oinstall where oracle is also in the oinstall group)
Properly configure ssh password-less connections for both GRID-owner AND oracle-rdbms-owner.
IP addresses required
3 SCAN addresses that point to myhost-scan.mydomain.tld in a round-robin fashion
PER NODE:
1 public IP address
1 virtual IP address
1 interconnect IP address should be iin /etc/hosts ONLY - Non-routable and not reachable via the public interface. DO NOT use CROSSOVER cable.
Interconnect should be on a DEDICATED INTERCONNECT switch.
As for the SHARED storage, the LUNS/Devices can be "carved" out on your SAN by your SAN admin. MAKE SURE that ALL devices in a given diskgroup are EQUAL size. (ie - DATA000=250GB/each, DATA001 500GB/each etc)
The installation guide gives a lot of directions on PRE-REQUISITES. Follow them. And remember, since you are new to this, you may install this several times before you get it the way you need it to be. Even installing MANY RAC clusters on multiple platforms, I still install it 2-3 times. Generally because the SA has forgotten some pre-req step.

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

Problem with weblogic ver 8 sp 4 installation on Solaris 10

Hi ,
I tried install weblogic ver 8 sp4 on solaris 10 .With the installable net_platform814_solaris32.bin ,I was able to succeed with the installation .However,the installation requires a internet connection .Is there a way to by pass this procedure.
kindly help

You can download platform installer. The package installer is approximately 475 MB.You can also refer to the following link under WebLogic Platform Distribution Methods
http://e-docs.bea.com/platform/docs81/install/prepare.html#1132881
- Ramkumar

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

ODSM installation failing on Solaris Sparc

Hi Guys,
we are trying to install ODSM on a Solaris server (Solaris Sparc 11). However the installer is throwing the following error while creating domain -
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] onConfigurationStatus: 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Description: Starting Domain.
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> State: START
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Name : StartDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Type : WLSDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] ________________________________________________________________________________
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->92185386-b8be-44a0-9a5f-0d0bc9657eb4 StatusMsg:Starting Domain.
[2013-01-10T15:50:52.890-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] reportStartConfigAction: EXIT........
[2013-01-10T17:04:38.884-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0]
[2013-01-10T17:04:38.886-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2013-01-10T17:04:38.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2013-01-10T17:04:38.891-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2013-01-10T17:04:38.892-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@50cb14aa
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2013-01-10T17:04:38.893-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2013-01-10T17:04:38.895-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
[2013-01-10T17:21:34.980-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Writing profile to file:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] outputFile:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] in writeProfile method..
[2013-01-10T17:21:34.982-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:COPY_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:LINK_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:CONFIGURATION_TIME_ID for writing.
We couldn't find any way forward for this error Can anyone please advise if they have seen this error in their environment and what is the way forward? Thanks

khaleel2 wrote:
Hi Gurus,
Too frequent INS-32025 errors. Tried everything possible, finally found in oraInstall2012-05-06_07-50-25PM.err file......
---# Begin Stacktrace #---------------------------
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4505)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
Please help soon. Appreciated if you give main points instead of providing document links.errors indicate that cluster (RAC) is involved.
At which step in cluster configuration, does this failure occur?

Solaris SPARC 10 64Bit -JDK Installation 1.6.05

In Sun Solaris 10, not able to create the key using the jce.jar. JDK 1.6 Installed & PATH & JAVA_HOME both are referred to jdk 1.6. It is showing the belwo error
Error: wrap() failed
java.security.InvalidKeyException: wrap() failed
at sun.security.pkcs11.P11RSACipher.engineWrap(P11RSACipher.java:395)
at javax.crypto.Cipher.wrap(DashoA13*..)
Caused by: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_MECHANISM_INVALID
at sun.security.pkcs11.wrapper.PKCS11.C_WrapKey(Native Method)
at sun.security.pkcs11.P11RSACipher.engineWrap(P11RSACipher.java:391)
... 3 more
Error: java.lang.Exception: Could not wrap the key: wrap() failed
java.lang.Exception: Could not wrap the key: wrap() failed.
If any patch is required for solaris sparc 10. Thanks

Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

Grid installation issue with GNS - 12c on oel6

I am trying to install the Grid (CW) for 12c on oel 6, on 2 nodes, using *static configuration*, for a flex cluster.
My nodes are all running dnsmasq as DNS, and the /etc/hosts file is edited to be the same on them. The public/private/VIP/scan addresses are all resolvable (I have checked them all using 'nslookup'). I do *NOT* have DHCP (as I am going with static configuration).
The grid installation wizard fails, once running root scripts, and trying to start ora.gns service:
PRCR-1079 : Failed to start resource ora.gns
CRS-2674: Start of 'ora.gns' on 'ol6-121-rac1' failed
CRS-2632: There are no more servers to try to place resource 'ora.gns' on that would satisfy its placement policy
2015/02/16 19:45:20 CLSRSC-107: Start of GNS failed
2015/02/16 19:45:21 CLSRSC-287: FirstNode configuration failed
I am using the following settings, in the installation wizard, for the GNS:
> Custer name:        ol6-121-cluster
> SCAN Name:        ol6-121-scan
> GNS VIP Address:        ol6-121-rac1-vip
> GNS Sub Domain:        ol6-121.localdomain
and here is the contents of /etc/hosts is as following: (public and private addresses are already assigned to different NICs on each machine, and the machines can ping each other's public/private addresses successfully):
# Public
192.168.56.101   ol6-121-rac1.localdomain        ol6-121-rac1
192.168.56.102   ol6-121-rac2.localdomain        ol6-121-rac2
# Private
192.168.1.101   ol6-121-rac1-priv.localdomain   ol6-121-rac1-priv
192.168.1.102   ol6-121-rac2-priv.localdomain   ol6-121-rac2-priv
# Virtual
192.168.56.103   ol6-121-rac1-vip.localdomain    ol6-121-rac1-vip
192.168.56.104   ol6-121-rac2-vip.localdomain    ol6-121-rac2-vip
# SCAN
192.168.56.105   ol6-121-scan.localdomain ol6-121-scan
192.168.56.106   ol6-121-scan.localdomain ol6-121-scan
192.168.56.107   ol6-121-scan.localdomain ol6-121-scan
I am just wondering what could be missing here which causes the problem ?
- Do I need to start/set anything specific for VIP or SCAN addresses ? (As with the static configuration, domain delegation is not happening to CW).
- Or is there anything wrong/missing with the cluster name or GNS sub domain ?
Any help or hint would be highly appreciated.

Software hasn't extracted properly, please use unzip version 6 to dowload the software and extract under one dir as given in the download url
http://www.oracle.com/technetwork/oem/grid-control/downloads/aix5lsoft-091214.html
Oracle Enterprise Manager Cloud Control 12c Release 2 Plugin Update 1 (12.1.0.2)
for IBM AIX on POWER Systems (64-bit)
Download the complete files
em12cr2p1_aix64_disk1.zip (2,169,268,773 bytes) (cksum - 3052516559)
em12cr2p1_aix64_disk2.zip (2,271,955,980 bytes) (cksum - 13147947)
em12cr2p1_aix64_disk3.zip (2,563,046,862 bytes) (cksum - 1681333195)
Directions
1. All files are in the .zip format. There is an unzip utility for this platform here if you need one and we recommend you to use unzip version 6.
2. Download the files and unzip them into the same directory

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

Issue with installation of Solaris 10 UFS in Ldoms

Hi Guys, I'm trying to install Solaris 10 with UFS but not able to make more than one partition. My vdisk is a slice of physical server hard disk.
When I try to modify the table partition of vdisk, it fails.
I cheeked in documentation and saw that vdisk can only be use for one whole s0 partition. How can I create swap and other partition?
Someone have try to install Solaris 10 UFS in Ldoms with success??

Thank a lot Pascal,
I Also use file container and it work fine!!

Installation Solaris 10 with JumpStart (ssh)

Hello,
I want to install Solaris 10 with a server JumpStart.
But i want only actived the ssh mod (for security).
How do you write that in the jumpstart script ?
What is the command line ?
Anybody can help me, please ?
Thank you :)
Message was edited by:
Marcorel

I have seen this too over the years and it ultimately comes down to something innate:
Here are a few suggestions:
1. Try and use interface ce0.
2. Check default route on both jumpstart server and client.
3. The arp cache may need to be flushed on the Jumpstart server.
4. Use snoop and see what happens during the actual RARPing phase between the server and host.
5. Switch the order in the sysid config file as indicated below:
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 ip_address=10.50.57.24 netmask=255.255.252.0 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=*****************
Please note I blanked your root password. Let me know if this helps.

Grid installation in solaris 10 (sparc) with Suncluster

Similar Messages

Maybe you are looking for