GRID LINES IN LOV

Is it possible to show grid lines( like forms block ) in lov's instead of plain background.

I know that I can control the origin of the rulers, but when I change that, the grid lines do not change, which is quite annoying.
Depends on which version of Illustrator you are using.
In recent versions turn on global rulers, then change the rulers origin in order to position the grid.

Similar Messages

Grid Lines show up in certain print types.

HP Officejet Pro 8600 all in one.Imac OS 10.6.8When ever I print in black and white mode for any size or type document or when I print in color to a single 4x6 photo page the vertical grid lines show up on the print. I don't have this problem when I print the same 4x6 color photo on a full size 8x10 page. I don't have this problem whenever I print any document in color. I have deep cleaned the print heads and realigned the print heads several times; but I cannot lose the grid lines when I print in black and white and try to print color to the smaller format paper? I love this printer otherwise. Setup was easy, operation is user friendly, and it prints beautifully other than these two little annoying instances. Can anyone offer a solution?

Yes, I am experiencing this as well. Thin black vertical lines about 2.8cm apart. Initially I thought they were just on things sent to the printer from Photoshop, but now I see them on colour items I print directly from the copier and on an email attachment from my iPad. At times the lines are barely visible ant that is what happened when I was talking wiht hp support. It looked as though the problem had been solved after reloading the software onto my iMac. But afterI hung up with them it happened again and when I went back to look at the other prints the lines were there too but not very visible. I have cleaned and aligned the heads and replaced an empty yellow cartridge. I printed a blank white sheet that had no lines. I cannot figure it out. Any suggestions anyone?

Is there a way to turn on grid lines in mailboxes like you could in Eudora?

If anyone here has used Eudora, then you probably know that you could customize the message listing for a mailbox to turn on grid lines between message lines and or columns if you wanted.
Does anyone know of a hack that could do that, or maybe just tell Mail to highlight every other row for easier list readability?
Thanks!

That would be an improvement to the interface. I've been looking for some time and not found a way to do it though. Anyone else?
If anyone here has used Eudora, then you probably
know that you could customize the message listing for
a mailbox to turn on grid lines between message lines
and or columns if you wanted.
Does anyone know of a hack that could do that, or
maybe just tell Mail to highlight every other row for
easier list readability?
Thanks!
Mac Pro Mac OS X (10.4.8)

How to print a report without row numbers or grid lines?

Is there a way to print a Discoverer report without row numbers or grid lines?
Thank you.
Blake

Hi Blake
You're not doing anything wrong.
The settings made when you use Tools | Options | Sheet are global settings that are only applied to new workbooks and worksheets going forwards. These have no impact on existing worksheets or even the one you currently have open. This is because Discoverer does not know whether your original worksheets were setup in a certain way deliberately as opposed to inheriting the global settings as they were at that time. What this also means, reading between the lines, is that these settings must then be stored within the worksheet itself, and this is exactly what happens.
Thus, to edit an existing worksheet's settings you need to open the worksheet, right-click in the sheet and from the popup select either Format Table or Format Crosstab depending upon the type of worksheet you are working with. After making any necessary changes you will need to save or re-save the workbook in order for those settings to be remembered for the next time.
Best wishes
Michael

How do I add a time stamp to the moving "Major Grid Lines" of a Waveform Chart?

Hello
I am using LV 8.5.1
I am using a Waveform Chart and I have turned on the "Major Grid LInes" using the properties tab of my waveform chart. (properties-->scale->grid lines)
When the code executes, I want to attach a time stamp to each moving yellow grid line.
So as the grid lines move from right to left, there is an associated time stamp for each.
Can someone help!
thanks
J
Solved!
Go to Solution.
Attachments:
how do I add time to the yellow grid lines.vi ‏16 KB

hova2010,
If you right click on your graph and go to X Scale >> Style >> and then choose one of the 3 styles on the far left you shoul see timestamps for those grid lines.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

When I have a border around a group of cellsand remove it, it also removes the grid lines. When I go to print the sheet, there are blank spaces where the border had been. I'm sing a MacBook.

When I have a border around a group of cell, how do I remove it. If I outline the cells again and then show in the Inspector NO BORDER, it removes not only the borderbut when I go to print it also the grid lines.

What application are you using? Numbers? Excel? Something else?
For help with Numbers spreadsheets go to this forum.
If you are using Excel, Microsoft has a forum to help you.
If it is something else, let us know what and we will try to point you in the right direction.
Best of luck.

Printing iCal grid lines...?

Hello.
I would like to print my weekly calendar with the grid lines showing.
Is there a way to do this?
Thank you.

Hi Jack,
I'm sure anyone who actually knows details of iCal in Leopard is not allowed to say.
Currently you could have 3-4 categories in different colors, but when you publish to the web/.Mac they are all in the same color
I currently publish three seperate calendars to a Webdav server and use PHPiCalendar to view them. They all show up as separate individually coloured calendars.
I'd submit your suggestions as user feedback if I were you.
Best wishes
John M

How can I make the GRID lines more bold within a table in the new Pages? (Not the outline of a table)

I can't find where to darken GRID lines on a table in the new Pages. I can make the outline more bold, but not the grid lines within the table. Is there a way to do this? The default grid lines are far too faint.

Yeah, the Help is missing a little.
If you select the block of cells that you want to change, then in the Format inspector:
Select the Cell tab
Expand the Border section
Set a line type
Set a line width
Choose a line color
Choose one of the nine options for which borders get the new settings

Change Color from grid lines in Flash 2D Line Chart

Hi,
does anybody know how to change the color from the grid lines in 2D Line Chart?
The color is always black (000000), I will use gray (CCCCCC).
I can use a custom XML. Can you give me an example please???
Where can I read something about the possible XML-Tags in Custom XML for Charts?
Best regards
Simona

Simona,
anychart.com has XML reference you can use for the charting engine in APEX.
Try using custom XML and sticking this inside the grid > values tag:
<lines color='0xCCCCCC' />- Marco

How to hide the grid lines between two rows in a ALv? Please help!

Hi Experts,
         I have a ABAP ALV(reuse alv grid FM) report.
The last field in the ALV is "Description" which can contain data of size more than 130 chars.
Since the max field length in ALV grid is 130 chars hence I am splitting this field value whenever the field length is more than 130 chars.
After splitting I am generating duplicate rows but with different "Description" field values ( each contains the splitted values".
For example:
Name| City | Description                             |
Hari|HK    |Employee responsible for time management |
Hari|HK    |and issue resolution                     |
Now I want to hide the grid line between these two rows
and just for Description field.
In other words I want ALV to display like this:
Name| City | Description                             |
Hari|HK    |Employee responsible for time management |
Hari|HK    |and issue resolution                     |
How can I acheive this?
Please provide some sample code.
Please help. I will be really greatfull to your help.
Thanks
Gopal

Hi Rich,
      If that is the case then atleast how can I hide the complete row grid line?
Please give some sample code.
Thanks
Gopal

How do I remove unwanted dark grid lines from my Basic_Graphic_Textures?

Basically, I have been having dark grid lines show up in files I create in Illutrator CS6 as of late. This particular instance is surrounding a background layout im trying to create. I select a 650x500 rectangle and apply a patterns fill. To be specific, Patterns--->Basic Graphics--->Basic_Graphics_Textures-----Diamonds. No matter what I do, there is a dark grid benath the fill. It shows up in any fill I have been doing lately.
The above image is a layout with 3 layers. 1 white layer(bottom), 1 red/pink layer(middle), and the top layer being the rectangle/diamond fill.
This only happens with pattern fills and with fluid repeating text fills. Normally, the dark lines are full squares, but in the above image they are only running vertically. Any suggestions would be greatly appreciated. I'm not sure if this is just a hardware issue with my graphics card, or if I'm missing something else.

The patterns are for filling space with a repeating pattern but have some problems as you are discovering. Try dragging the swatch for the Diamonds texture from the Swatch panel to a file you have open. You can see how the pattern is created. Notice the overhang on both sides. Does this look like your problem?
By changing the stroke of the line in the Diamonds pattern to 0.25 and replacing the swatch I have to go out to 50% size to see the repeat like this

Unable to bold a cell verticle line in Cross-tab Format Grid Lines

Hi
I am unable to bold a random Cell vertical line inside the cross-tab. My cross-tab is having access database which pulls every data correctly,
To elaborate , here is the images to make it clear.
First one is the current output of cross-tab & 2nd one is the desired output :
To make it more clear ,
I am giving the screenshot of Format grid lines option, when I have selected Cell vertical lines , I can change Line options (Like style,width,color) from it. When I change it, it changes all three lines simultaneously. But, in that, I just want to bold only the last line of this grid.
The screenshot as follows (To denote the lines, I have put numbering under the vertical lines, where I want to bold only the third one) :
Please let me know, if any solution to this. I m using CRVS_13.
Thanks in Advance.

Hi,
try to do this way..
Right click on crosstab - > crosstab expert -> customize style -> select your particular column then goto Format Grid Lines -> select your particular one based view -> ok..
I hope this not yet possible because select 1 automatically 2,3 vertical lines are selected..
See how it works......Please update ASAP
tHANKS,
dj

Grid lines get displayed while opening reports in MS Word 2003

When generating report using rdlc, We are getting grid lines (grey color) in word document (MS Word 2003).
When opened with MS Word 2007 the grey lines are not get appeared. It's happening only in MSWord 2003.
Is there any solution for this problem? Please provide suggestions.

HI Hema,
To open new document add this line.
*--Opening a new document
get property of gs_word 'Documents' = gs_documents.
call method of gs_documents 'ADD' ."= gs_document.
Regards,
Sravanthi

Line Chart glitch - grid lines thick at certain heights

The Flex Line Chart control does not display correctly at certain heights. The gridlines that are supposed to be 1px pin stripes are sometimes displayed up to 100px wide. This can be demonstrated with 1 line of code
<mx:LineChart height="33000" x="200" y="0" id="chart_1" width="100" ></mx:LineChart>
I also have another small app that uses a timer to demonstrate how as the height increases the gridlines increase from:
1px to 100px
then back to 1px
.... then as the chart's height increases another 7000px the 1px gridlines display correctly
then it repeats going back to thick, then thin etc... almost a pulsating effect
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="init();">
    <fx:Script>
        <![CDATA[
            import flash.utils.Timer;
            import flash.events.TimerEvent;
            private var timer:Timer = new Timer(10);
            private function init():void{
                timer.addEventListener(TimerEvent.TIMER, changeheight);
                timer.start();
            private function changeheight(event:TimerEvent):void{
                chart_1.height=chart_1.height+30;
                lblHeight.text="Chart Height:"+String(chart_1.height)+"px ";
        ]]>
    </fx:Script>
    <mx:LineChart height="33000" x="200" y="0" id="chart_1" width="100" ></mx:LineChart>
    <s:Label id="lblHeight" />
    <s:Button y="80" click="timer.start();" label="Start" />
    <s:Button y="100" click="timer.stop();" label="Stop" />
</s:Application>

Are you able to acheive this.?
PCXML script is used for chart rendering, and with that I think you can't demark the Gridlines.
The following Xml file gives the definitions for the chart components including gridlines.
chartviewtemplates.xml
Which inturn refers to the following js for gridlines
i think you have to work on the Js here demark the grid lines by default
<Oracle_BIHome>\web\app\res\b_mozilla\views\chart
dlggridlineseditor.js
Before doing any changes take the backup.
Thanks,
Vino
Edited by: Vinodh NK on Oct 22, 2010 3:44 AM

Grid lines on line chart

Hi,
I have got a SVG line chart. Even though I disable the grid lines in the SVG chart attributes, the grid lines still show up.
The values I am getting in the line chart varies from 0.01 to 2.00.
Can anobody help me to make the grid lines go away??
Thanks,
Swaroop

Hi,
Has anybody else got the same problem? Do you know a work around??
Please help!!!!
-Swaroop

GRID LINES IN LOV

Similar Messages

Maybe you are looking for