Grid POV disappears during essbase refresh

Hi all,
The grid pov that we created for our reports disppears when user tries to open the report during Essbase cube refresh.
when try to open FR report during cube refresh (outline build), the grid pov members are set to the parent instead of the members that have been originally selected.
whn we open the same report after essbase cube refresh, Grid pov still shows the parent..so we had to go to report studio and reset the Grid pov.
Is there any way we can handle this.
all reports work fine when run after essbase cube refresh.
thanks in advance

I am just curious if there is a need to run the report during the refresh. Can't the users wait till the refresh is over? I don't think you need to change the POV member in FR Studio. As far as I know, when I user selects a POV member on Workspace and then logs out, the next time he/she logs in, Workspace remembers the latest selection.
I am not sure if Workspace automatically changes the POV members to their default value (dimension itself) after an Essbase refresh. If it is the case, I know it is annoying but, user might need to select the POV members again. I always try to limit the dimension on POV. I don't the exact term, but I like locking the members down on POV, so the users only have to select limited number of dimension members.
Hope this helps.
A

Similar Messages

  • Printers deployed by Group Policy Preferences disappeared during GP refresh processing

    I am testing deployment of print queues using GP preference. All clients are Win 7. Replace mode is used so that the print queues can be updated if they are renamed on server side. Also set to remove the printers when GP is out of scope. I found that all
    the printers disappeared during GP refresh processing which happens every 90 to 120 mins by default. Then repopulated. As most of them are utilizing HP universal print driver so the repopulation usually take 5 to 10 minutes to complete.
    To stop the refresh I attempt to set maxnogpolistchangesinterval registry value in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{BC75B1ED-5833-4858-9BB8-CBF0B166DF9D} to 960 (16 hours). As users shutdown computer
    daily so this should eliminate the refresh processing on printers. But the reg key can be writted only by SYSTEM. Administrators have read access only. Looks like anything under the key should not be modified.
    Is there something I can set so that printer processing happens only during computer startup?

    HelloForest,
    To achieve the requirement, you can try the following solutions:
    1.     Create
    a startup script to deploy the registry value;
    How Can I Use the RunAs Command to Run a Script Under Alternate User Credentials?
    http://blogs.technet.com/b/heyscriptingguy/archive/2006/04/28/how-can-i-use-the-runas-command-to-run-a-script-under-alternate-user-credentials.aspx
    2.     Create
    a custom .adm to deploy the registry value;
    Writing Custom ADM Files for System Policy Editor
    http://support.microsoft.com/kb/225087
    Brent Hu,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread. ”

  • The number of POV to be set exceeds grid POV

    Hi All,
    In smart view i am getting the below error.
    The number of POV to be set exceeds grid POV.
    Can you please let me know where i have change the number of POV value?
    Thanks,
    Prathap

    Hi Prathap,
    Are you using 11.1.2.1 Smart View? If yes, are you getting this issue while refreshing ??
    If that is the case then go with 11.1.2.1.102.
    http://john-goodwin.blogspot.com/2011/09/get-up-and-running-with-smartview.html
    Cheers.!!!

  • Number of users logged in during cube refresh activity

    I am using Hyperion 11.1.2.1 and running  Planning cube refresh activity using \Hyperion\Planning\bin\CubeRefresh.cmd.
    Is there any way to find out total number of users logged in into a particular Planning Application during Cube refresh activity running for that application ?

    I don't think Planning repository has information about sessions.
    Let us know if you succeed.
    I was not talking about Essbase as in "Essbase", all users that are performing an activity in Planning (data refresh, data load, run business rule) will show up in EAS sessions so if you run the maxl display session against Planning application it'll give you all users.
    Now OP, you can perform a search for "line count windows cmd" will give you ideas on how to count the lines and that count is going to be the numbers of users (well it is not the number of users, but number of sessions)
    ORA-00001: Unique constraint violated: Count lines in multiple files using Windows command prompt
    Regards
    Celvin

  • Grid POV - restrict choice to "Members from List"

    The report uses a Essbase connection and the version is 11.1.2.1
    In the Grid POV, I had set up "Member from list" option to restrict choice to a few accounts, not the whole list.
    Nevertheless, the entire POV shows up. Users have to navigate the whole tree to find what they need.
    Any idea if this is a known issue or am I missing something? I did a search of support but could not find anything specific..
    Thanks!
    Edited by: user640852 on Sep 3, 2012 6:34 AM

    Each user can setup their User preferences for Financial Reporting.
    In the workspace they would go to File then Preferences then Select Financial Reporting in the Left pane. Then under User Point of view choose setup members.
    The user would have to select the database connection, then they can choose the members for each dimension they want to see when running reports.
    Its a pain to make the users set this up but once it is set it makes running reports easier for them.
    If you were using a Planning Connection, in the same section the user could select the option to only see members in which they have access.

  • Creative cloud installer just disappears during install

    I had creative cloud and on last update most of the applications are gone along with the desktop icon.
    I have tried to install creative cloud again - but it just stops halfway and disappears during install.
    I've tried safe mode install
    Ive renamed OOBE folders in both librarys
    I've tried the adobe application manager and that crashes on install
    I've tried the Adobe clean up tool
    Nothing is working to get creative cloud to reinstall on the computer - I've lost about 4 applications in creative cloud
    Working on a Mac - Yosemite OS

    Hi!  The cleaner failed - simply could not detect any creative cloud products. ( It did find a previous CS6 installation, long since uninstalled, actually).
    Didn't get a chance to try ROOT, as an Adobe tech (Loveneesh) remoted in and did some 'known fixes'... basically he cleaned up the failed CC desktop installation ( deleted a couple of folders) - and then gave "wide open" permissions to a couple of sets of library folders ( One for machine, and one for user). I believe they were
    /library/application support/
    /library/application support/Adobe/
    /users/[username]/library/application support/
    /users/[username]/library/application support/Adobe/
    Still couldn't install CC desktop, (failed twice!) BUT that at least allowed  the installation of "Adobe App Manager" - which was subsequently UPGRADED to CC Desktop. Something of a clever workaround, if you ask me!
    And now its all working OK again.
    I'm a bit bothered by the somewhat cavalier ""Everybody" permissions applied to library folders, but as I understand this is the quick fix when nobody quite knows what the heck is going on with permissions... (I suppose ROOT access gives much the same effect for installations)

  • HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    What calendar were you syning to? Outlook? Google? Something else? The directions on how to resync vary a bit.

  • HELP! Does anyone know a Data Recovery Expert for I-CIoud? -My calender disappeared during I-Cloud transfer of data from old I-Phone 4 to new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calender disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calendar disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
    The Apple techs are looking. But they can't find it. Nor can they find a back up on my laptop, Evidently when I backed up my Iphone to computer the calendar wasn't syncing. Since I only use the calander on my phone - I never noticed.
    The Apple store rep that sold me the I-Phone 5 on Monday, was transferring my contacts and calendar thru I-Cloud (I never used I-Cloud before that moment - and always had it turned off). He successfully transferred the contacts - which are still on my phone), but the Calendar weirdly split into 6 calendars (2 of which were linked to my G-Mail which only had a few entries) (4 were linked to my MSN / Hotmail email and contained all the major events/data). I never created calendars that were separate or liked them to 2 different emails. I just typed entries into the I-Phone calendar. However, the calendar did exist on the new I-Phone for 24 hours. Something happened during transfer. When the Apple Genius Bar tech was attempting to back up my Calendar & merge the 6 calendars, everything disappeared in his hand while he was looking at it.
    I am hoping that some really good data recovery expert exists that can restore the calendar that was in both I-Phones yesterday. It is completely devastating if I can't recover it.
    Any help, or referrals, is great appreciated!!!!
    Thanks!

  • IOS 7 ugrade failed " Error:Device disappeared during timed transition". Phone will not now turn on or sync with itunes, any ideas please?

    iOS 7 ugrade failed " Error:Device disappeared during timed transition". Phone will not now turn on or sync with itunes, any ideas please?

    if a Mac OSX Computer is in near - try iBackup Viewer.
    This is free of charge and can read your backup.
    and thats the main difference. Those tools are reading the saved Data in the backup
    but itunes attempts to restore the data from the backup on your iphone. if there are any corrupted data in the backup - the backup restore goes wrong. this can happen during security software or wrong corrupt data already stored on the iphone.
    if itunes messed up to restore from backup try this one :
    - restore your iphone to factory settings using HT1808 or reset all settings and content direct from iphone
    - rename your iPhone (e.g. iPhone Test)
    - setup your iPhone as new device -> attempt to make a new backup - if successful -
    - click in itunes on restore from backup... and choose your desired backup
    or go to:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(Username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista - Windows 7: \Users\(Username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Pull your complete BackupFolder and try a different PC - copy the BackupFolder on this different PC in the same Path above - start iTunes and see if your Backup is there - attempt to restore from Backup again

  • Dynamic header based on the chosen Grid POV

    Hello,
    I have two grids Grid1 and Grid2. Both the grids have one editable POV and are different from each other. Either of the grids are being hidden based on a flag being input by the user.
    I need to display the dimension name and the member name of the chosen Grid POV in a text box in the header. This needs to dynamically change based on the grid being displayed. e.g. If the Grid POV for Grid1 is "X" and for Grid2 is "Y", I need to display "X" when the grid2 is hidden and "Y" when grid1 is hidden. There is no conditional formatting on text boxes in headers. Is there any other way to do this?
    Thanks,
    Ravi B

    Hi Ravi,
    yes you can not apply conditional formatting on text boxes.
    But it is possible to put the conditional formatting on the grid cell and then you can pick the text from grid cell into text box.
    Hopefully this will solve your problem.
    Regards,
    Rahul

  • Since upgrading to 6 on my iphone, my notes disappear. They are no longer in the cloud. Also disappear during typing! What's happening?

    Since upgrading to 6 on my iphone, my notes disappear. They are no longer in the cloud. Also disappear during typing! What's happening?

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • Preserving SOA Logical Ports and Trust Relationships during DB Refresh

    Hi,
    I have been searching for this for a while and have not had any luck so far. I thought maybe the vast experience in this community might be able to help me.
    I am trying to preserve the SOA Logical Ports and the SMT1 Trust relationships of the target server during  DB Refresh. Is there a list of tables that we could export (Much like exporting/transporting RFC Destination)?
    Regards
    Shantanu

    Hi
    Check the here under tables if they fits to your needs
    Regards
    SRT_LP                       Logical Ports
    SRT_LP_FEAT            Logical Port Feature
    SRT_LP_OP_FEAT     Logical Port Feature (Operation-Dependent)
    SRT_LP_SXI_ADDR   Logical Ports: XI Addressing
    RSECACTB                 Table for ABAP Access Authorization for Secure Memory
    RSECTAB                    Secure Memory: Memory for Encrypted Data
    RFCTRUST                 List of existing trusting systems
    RFCSYSACL               List of permitted trusted systems for the current system

  • Does User POV Supersedes Grid POV in Hyperion - Financial Reporting ver 9.3

    In Hyperion Financial Reporting studio , under grid POV , for a perticular dimension we have selected a perticular member from the list.
    Now on the User POV, for the same Dimension it is selected as "any member". Now when we open the FR report in PDF from the same user ID, in POV option we are able to view all members. It looks like User POV settings is superseding the grid POV.
    Is there any way by which we can select grid POV to take control over user POV? or if it is possible that users will be able to view the report only based on grid POV?
    Regards,

    Have you selected any particular member in Grid POV. ? i.e selecting grid POV and doing member selection.
    If you select any member in GRID POV then while running the report it will not ask value for that particular member in POV window. i.e it will always consider the by default member while running the report.

  • Dynamic Row Suppression based on grid POV

    Hi,
    I need to suppress rows based on the grid POV. The report is set up to have accounts in the rows and the user is able to select a specific account in the grid POV. Based on the grid selection, half of the accounts in the rows either need to be suppressed or not.
    One solution already available is to use advanced suppression on each row but this option will take too long. I'd like to find a solution using UDA's or some other way. Any ideas?

    Im not sure there is any simple way to get dynamic row selection based on what is selected in the page.
    If I were designing the form based on what you have stated, I would probably stick both Account and Year in the page, and the 400 products in rows. This would require the user to select the different combinations of Year / Account, but would mean only 12 columns (instead of 72).
    Alternatively you could stick Account in rows too - meaning 800 rows, but less combinations to select in Page....all depends what is deemed acceptable to the user.
    Probably other approaches that may be better than above (put Product in the Page for fun!!)
    Thanks
    JB

  • Financial Reporting Studio - Grid POV

    I have a report running from HFM (9.3.1.3.0.2176) using Financial Reporting Studio (9 9.3.1.0.0.0325) where I have restricted the Grid POV to 'Select members from a list' on Accounts.
    When I run the report as an HTML from within Reporting Studio or workspace, a box appears entitled 'Preview user POV' with 'This report/book will run for the members on the user point of view listed below' with a selection box that when clicked only shows the accounts I defined in the list.
    However, when the report is run from Workspace (9.1.1.0.0.248) by any other user then the accounts are not restricted.
    Can I make the accounts restricted to the list for ONLY this report for all users without impacting any other reports and if so, please can you explain how?
    Thanks in advance
    PS I also restricted User POV in the vain hope that it would make a difference but no :-(

    Select the grid. You will grid POV checked in right side properties window. Uncheck that.
    Regards
    Celvin
    http://www.orahyplabs.com

Maybe you are looking for