Grid size for Curves in PhotoShop CS

I want to get back to the default grid size for Curves in PhotoShop CS. I accidentally changed it to a much smaller grid (100 squares) from its default grid size which I think was 16 squares. I don 't know what I did to change it, but I'd sure like to unchange it.

Option-click on the grid.

Similar Messages

Disc Card Size for Curve 8320 (AT&T)

I ordered the Curve 8320 (AT&T) which is in transit as I type and I was looking at ordering some accessories from Amazon. While checking the SanDisc Cards I noticed several different complaints about the sizes.
Some said 8 GB was too big and there were complaints about what class they came at. Some thought it was going to be class6 or 4 and it came as class 2. I'm pretty ignorant to any of these things and wouldn't have even known about it had I not read the reviews.
Also they were talking about getting the card with the adaptor. I suppose thats so the card can be put in the desk top slot?
I'd like to know in laymens terms what I should get that will make things the easiest for me to deal with.
wouldn't simply connecting the BB with the cord to my PC be the simplest...and why would I need to do anything different like some of the reviewers in Amazon speak about?
I was looking to buy this card with the adaptor. 8GB class 4 with adaptor for $20 Does that sound right? (or the one below this link? )
http://www.amazon.com/gp/product/B001CQT0X4/ref=s9subs_c1_23_at2-rfc_p_si2?pf_rd_m=ATVPDKIKX0DER&pf_...
Then there's this 4GB that says it's specifically for the Curve 8320..hmmmm
http://www.amazon.com/Professional-Kingston-Gigabyte-BLACKBERRY-formated/dp/9982122428/ref=sr_1_2?ie...
I'm also buying the film protector for the screen ... thats a given...as well as one of these nice heavy looking rubber BB protector skins.
http://www.amazon.com/BlackBerry-HDW-13840-007-Rubberized-Skin-Devices/dp/B000ROI682/ref=wl_it_dp?ie...
Any information goes very appreciated.
Thanks mucho
andy
Thanks much
Message Edited by andybuildz on 12-29-2008 11:32 PM
"If opportunity doesn't knock, build a door."
www.cliffordrenovations.com

First things first. You will need to check what version OS your device is running before deciding on what size card to get - unless you upgrade the OS to 4.5.0.81 or higher. The 8320 can come with OS 4.2.2 which only supports a 4 Gb card. Supported card size info can be found here. Check this post for info on upgrading you device's OS.
Second, I don't know what "Class" means with an SD card - I would guess it means what speed it is. Speed is really only a significant factor for high resolution (over 5 Megapixel) cameras.
While you can simply plug your BlackBerry into your Computer using a USB cable (at which point the SD card will appear as any other USB removeable drive), it is always pretty slow. I would strongly recommend getting a Micro SD card with an SD adapter - and of course a card reader for your PC if you don't already have one. Do major transfers using the SD adapter (more than a Gig of data), and use the USB cable for smaller transfers. You'll want to keep the shuffling of the card to a minimum as it is difficult to get to on the 8320.
Jerry

Is it possible to reset the default image size for VIEW in photoshop elements EDIT menu?

When I go into the Edit menu, I have to click on "Fit on Screen" to enlarge the view. Is there a way to change the default size of the Edit image so that the larger size I get with "Fit on Screen" is the new default?"

Not as far as I know. PSE opens a new image in the editing window according to its own internal formula for size.
Ken

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

Default screen sizes for fuid grid & media query

Is there a way to change the default sizes in the fluid grid dialog for new pages. I would like to start with a 320px mobile size not 480. (since there are hardly any devices that are 480 as far as I can tell. Changing the tablet size would also be useful.

If you're talking about the preview screens in DW, click on the values and select or edit new ones. See screenshots.
Nancy O.

Photoshop keeps altering the canvas size for very exact measurements

I need exact measurements for the canvas size which has to be 704.55 mm in width. I noticed that when i create a new document and insert this size for the document width it changes to 704.51mm if I check out the canvas size under Image > Canvas size. Any explanation as to why it alters the canvas size for very exact dimensions?
Thank you

An image cannot consist of fractions of a pixel. Imagine you have an image that has a resolution of 3 ppi. That's 3 pixels within an inch of image. Now say you want a canvas size of 0.5 inches. That would mean an image consisting of 1.5 pixels, which is impossible. The image must be rounded to the nearest size that accomodates a whole pixel. You can either just decide that that's good enough (usually it is), or use a resolution so that your canvas size has more pixels that can be divided up into your desired size, then maybe you may be able to fit your resolution exactly into your canvas size.

How to make a live curve in photoshop.

Hi everyone, I just posted a video on youtube showing how to make a live curve. You can check it out here How to make a Live Curve in Photoshop - YouTube
I'm very curious about your opinions:)

Thanks for your reply. Could you please walk me through it from the start (I am new to this color chanel stuff). I need to add green text to a flyer. Do I make the spot chanel first, then add the PMS color text? What mode should it be as it cannot be CMYK?
Many thanks

Recommended Image Size for Contact Pictures?

Hi All,
I want to edit up some family members to attach thier images to my iPhone contacts... Does anyone know what the preferred resolution size is for the iPhone for optimal appearance?
I've tried to do this with outlook before, and I hate the way it dithers the images to a low quality.... I'm hoping that the iPhone doesn't do this and so I wanted to experiment with how they would appear...
But instead of making the images just any random size, I wanted to crop them to the preferred image/pixel size so that my photoshopped images look like what I expect them to show up like...
If you could advise with the documented or known pixel resolution size used by the iPhone it would be appreciated!

Thanks, but I don't believe that the contacts come up full screen do they?
Usually there is a optimal image size for certain things like contact photos and I am just trying to help ensure that all my photos are the same size and don't vary...
I might be a little carried away with how I am formatting them, but just hoping someone already knows this answer!

File size when jumping to Photoshop

When I open a NEF raw file from my Nikon D700 in Photoshop as 8 bit it opens at 49.5mp, but when in Lightroom, after working on the same file, if I jump to Photoshop, using Command-E, then the file opens at 32.5mp. Any idea why this is, and how can I get the file to 49.5mp when opening it through Lightroom. Thanks, Neil

Alamy's size requirement are rather outdated these days, but is based on the standard sizing for a image printed as a double page spread in a magazine as a guidance for what could be achieved by a scan of a 120 negative or transparency and high quality 35mm negatives. They have never updated it for digital files and just expect people to interpolate from most cameras (which natively produce smaller files) As they offer a range of sizes for all there files they set this as a minimum. The quality control checks then examine for all other factors.
I think Alamy stick with them as it is a good test of the submitting photographers understanding of image formats. I understand from the quality control people that large numbers of people try to upsize files as jpgs until they get to 40 odd MB (which is massive) and then get annoyed when they won't upload! Lots of files also get rejected due to a failure to understand the no sharpening rule and switching off input sharpening......rather than output sharpening.
Alamy sells to a wide range of clients and I suppose many don't want to interpolate themselves.
It is still far more sensible than agencies that still insist on such and such dpi!
By the way, the 95% setting for jpg output with a decent file will always produce a jpg small enough to upload to Alamy and any other agency without any potential deterioration in image quality if correctly processed, so I would suggest this as your standard setting when sending file to agencies. A 50 MB file compressed at 95% in LR will be between 4.5 and 7 MB dependent on the complexity of the image.
I submit to several agencies, magazines and newspapers. All have their own requirements, which I just meet every time. The customer is always right as long as they pay the bills. After a while most agencies know your work meets their quality thresholds and don't bother checking. Alamy is unusual in that the size thing is determined by software, so if this is wrong it doesn't even get to go to quality control. On your first hundred or so submissions every file is checked by a human being. Once you have regularly met the standards they don't usually bother checking any more and just pass the uploads; but I understand they still make the occasional check on random files to make sure. As they are a nice source of regular income and don't undercut proper agencies (unlike the open to all type agencies) I am OK with Alamy's quirky rules. There is even a plug in which does it all for you!

Change grid size together with the paths sticking to it

Hi! This is my first question in the Adobe forums!
I have made a simple score in my own music notation with the help of the grid in AI CS7. However, I set the wrong page size and now I have to everything over again. My question is: Can I fit thwe whole thing on an art board with a smaller size along with the grid? I want to keep everything but the size of the art board. So how do I change the grid ALONG with the objects and lines that are "stuck" to it? I hope my question is clear. Let me know if it isnt and I will clarify.

I think I fixed it. I will try later today to set the grid size the same as the width of the page and subdivide it this way. It would solve it if I could SET the artboard width to be anything: 1cm, 30cm, 100000 cm without changing the size of it.
-Joakim
Den 9. juni 2014 kl. 23:47 skrev Jacob Bugge <[email protected]>:
change grid size together with the paths sticking to it
created by Jacob Bugge in Illustrator - View the full discussion
Joakim,
As mentioned, the grid is a rather fluid thing, if it is the one I presume so you cannot rely on it for alignment and the like.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6445830#6445830
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Grid size [VI Editor Options] property

Hello Quick question about VI programmatic Editing, specifically the [Editor Options] section.
I have not been able to find the property/method for the block diagram/ front panel 'editor grid size'. In the UI the setting is found on this page:
When working with old code, the first thing I do is up these values to the x86 limit (4095) so I only see the origin X,Y lines and not the fine scale grid*. This afternoon I am looking for a way to Mass Edit a .llb or folder of .VIs with VI editor properties/methods but [A] could not find them myself and [B] Could not find anything online about them.
NOTE: This post will be managed, I will post any solutions I find in this section, or after 1 week post what else I tried before giving up.
* Why don't I just disable the grid? The origin Lines are very useful for my current project, the grid is not.

Did nothing come up when you were forced to search the forum for this feature? Because not so long ago I posted the same question. Turns out I was your XKCD, just not from 2003.
http://forums.ni.com/t5/LabVIEW/Scripting-Style-Control-Grid-Size/td-p/3122727
It got no traction so I think someone needs to make an idea exchange idea. If you make it I'll vote for it...if I make it will you vote for it?
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Scripting Style Control Grid Size

Is there scripting functions, to allow me to edit a VI's alignment grid size, and control style for creating controls/indicators? These setting are saved in each VI under the VI Properties, under the Editor Options. I looked around and couldn't find them. Thanks.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Cross linking with THIS and looking forward to the Idea Exchange post.

Which macbook pro for lightroom and photoshop

Have my eye on the two 15" models. One with Intel iris pro graphics, the other that also has the nvidia gt 750m. Maybe I'm making mountains from molehills. You can tell me if you think that's the case
I will use my laptop at home always attached to a large screen. It's what I do with my current, April 2008 macbook pro. Right now a 25" NEC. I may add an additional screen as well, so I might have two screens besides the laptop, one attached via hdmi.
Right now I don't do video work. No gaming concerns for me. Photoshop and Lightroom the bulk of my work. 70,000 image Lr catalog. Large size photoshop files. Well near 1 gb sometimes with several layers.
If I buy the mbp with just the intel iris pro graphics card I'm thinking to upgrade processor to 2.5ghz. Will also upgrade ssd to 500gb. Or do I need, will I benefit from the nvidia card and card switching, dgpu?
I've just been reading about problems with the discrete graphics card version. Problems with freezing video, some with problems looking at certain websites via a browser firefox or safari. I wonder if that's only with older versions of the mbp.
And that the mbp with the dgpu, the nvidia gt 750m always uses that card when there is an external monitor attached. Creates additional heat for the computer.
Just looking for some advice before i hand over the cash. There is only a 100 difference in price so in the end I'm not concerned about cost. Just want a computer to do what I need, do it well, and for me to have as few problems as possible. I do like to keep my computers a long time. This current mbp is seven years old in a month. The computer I had before that, a G4, lasted me eight years.
thanks for advice...

The 2.6 Haswell i7 processor should be just fine - you really don't need the faster processors. Since Lightroom caches so much, though, it would be nice to keep most of that in RAM - much faster than writing/reading to a flash storage device - so I would recommend 16GB of RAM as you cannot ever upgrade the RAM on your own (or even through Apple).
You should be able to do anything on your MacBook Pro as on your iMac - albeit on a smaller screen!
Clinton
MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

How to turn off step 1px at the editing of curves in Photoshop CC?

Hi!
Recently moved to Photoshop CC and found that when editing curves I can move nodes curve only in increments of 1px for any approximation.
In Photoshop CS5, I could move the nodes with step 1px at 100% scale, and move more accurately at greater approximation.
How could I move nodes curves in Photoshop CC with a small step as before?

In the bottom right corner of the display there are several icons. Select the second icon, "Browser & Metadata Overlays” and select “Switch to Basic View”. You can also fine tune what is displayed there.

Can one superimpose a grid on a photo in photoshop elements?

Can one superimpose a grid on a photo in photoshop elements?

refer to this previous post
PSE12: How to create gridlines on the image page then converted into a pdf? [was: N276]
For more examples, enter "grid lines" or "gridlines" in the Search Communities box.

Grid size for Curves in PhotoShop CS

Similar Messages

Maybe you are looking for