GRIR Clearing (old items)

Dear all,
could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
Sincerely,
Lucas

Hi,
It is not recommended to post manually on GR IR account.
You should try to clear this difference with MR11, it is possible to clear old items with the current date.
Rgrds,
Miroslav

Similar Messages

  • Account assignment deatils of PO in GRIR clearing line item

    Hi
    Can we get the account assignment details from purchase order in line item of GRIR clearing account at the time of Goods receipt? We have created a purchase order with account assignment a WBS element. At the time of goods receipt the WBS element is appearing in P&L account but it’s not in GRIR clearing account but at the time of Invoice verification (MIRO) the WBS element updated in the line item of GRIR clearing account.
    Thanks and Regards
    Vinay Thakre

    Hi...
    I'm rather new but maybe my ideas can help you.
    Have you maintained a warehouse for this plant? (In my company some plants don't have) Is there a G/L account assigned?(I think this can be configured, because we have at least 3 different) Is maybe the material blocked for warehouse? (we have materials that are for direct consumption only).
    Just ideas.
    Regards, good luck. Paul

  • GRIR clearing not happening

    Friends,
    I am facing the following problem. Please help me out
    While GR is made, vendor number is updated agaist each line item, i.e, 'inventory debit line item' and 'GRIR clearing line item' each has the vendor number.
    But while doing MIRO,
    only the line item for 'Vendor account debit' is having the vendor number against it . The 'GRIR clearing credit' line item is not having the vendor number against it. This is creating problem. We need to configure so that the vendor number is copied against this line item also.
    Beacause of this , the GRIR clearing account is not cleared automatically.
    Can anybody suggest what is to be done so that the vendor number is also updated in the accounting document generated while posting invoice (MIRO)

    Hi,
    the standard practice is just Assignment (ZUONR) which is in turn sort key 014 (PO + line). Re vendor, see my previous post. Re business area, that should not be a problem at all as the business area should be derived from the plant which is the same in the GR and in the IR documents, so if the PO line is the same, the BA cannot be different. Same is true for material, it is either empty (service PO's) or the same in GR and IR.
    There is one more thing to mention here: if you are using goods receipt based invioce verification (flag in he PO line, Delivery tab), then the matching of the GR/IR items should not be made on PO line level (= assignment), but also based on the goods receipt document number. I.e, an invoice must be assigned to a particular GR (and not to any GR). This is typical for scheduling agreements. Pls. refer to the F1-help on the checkbox "GR/IR account special process." on the selection screen of F.13, it should explain very well how it is working. No additional setup needed here, so the above are still valid: use only ZUONR and nothing else as the clearing criteria for GR/IR accounts.
    Hope that helps, points welcome
    Csaba

  • F.19  (Analyz GRIR Clearing..) picking up non-open item

    Dear People,
    1. For a particular Co Code, the GRIR was not set as an Open Item Management account.
    2. A GR was posted on 14.5.2008.
    3. On 9.6.2008, the GRIR account was changed to an Open Item Management account by zerorising the account and reposting the GR above through journal.
    4. on 13.6.2008 LIV was done and it was cleared against the item posted in (3) above.
    5. At this time no postings are generated by F.19 (Analyz GRIR Clearing..) since there are no open items left in GRIR account.
    6. But after one year, in August 2009, F.19 suddenly picks item 2 as Goods Rec Not Inv. although this item is not an open item and it has already been cleared in 4 above. And this had been going on until now.
    Any idea why this happened? Is it caused by certain Support Package updates?
    Thank you very much.
    Edited by: Darth Maut on Jan 13, 2010 12:56 PM

    Dear People,
    1. For a particular Co Code, the GRIR was not set as an Open Item Management account.
    2. A GR was posted on 14.5.2008.
    3. On 9.6.2008, the GRIR account was changed to an Open Item Management account by zerorising the account and reposting the GR above through journal.
    4. on 13.6.2008 LIV was done and it was cleared against the item posted in (3) above.
    5. At this time no postings are generated by F.19 (Analyz GRIR Clearing..) since there are no open items left in GRIR account.
    6. But after one year, in August 2009, F.19 suddenly picks item 2 as Goods Rec Not Inv. although this item is not an open item and it has already been cleared in 4 above. And this had been going on until now.
    Any idea why this happened? Is it caused by certain Support Package updates?
    Thank you very much.
    Edited by: Darth Maut on Jan 13, 2010 12:56 PM

  • GRIR clearing accounts - PO & PO line items

    Hi gurus,
    In ECC 6.0 with new GL functionality being active in TCODE FAGLL03 for all GRIR clearing accounts we would like to see purchase order and p.o line item to appear in the report.
    regards,
    rupa

    Both the fields are available i.e. Purchasing Document and Item but they are not populated...........  Let's find the reason why it's not getting populated.  I'll search and get back to you when able to find it. 
    Regards,

  • F.13/MR11 clearing of old items / changed config

    Hi, I my customer have been live for 3 years with G/L and have recently activated MM!
    The problem is that the sort key for the GR/IR account has been changed during this period and now is it not possible to clear those old items with MR11 or F.13.
    What should I do the clear those old items? Go back to old config and clear the old items (in a period without MM activity) and then reset the old config or is there a short-cut I have missed?
    KR
    René V. Nielsen

    HI Dear,
    You can use other than system settings which you configure, Just select the check box " GR/IR Account Special process "in F.13 and execute system will show the " Reference Key 3 " option it'll update Automatically with GR material document based on that also we can clear GR/IR accounts.
    I think this will resolve the problem. or eals we have to change the configuration setting.
    Regards
    Radha

  • Solution to Clear Old Open Items

    Hi All,
    We have a requirement of the following with respect to clearing the balance of a GL Account.
    i) The document cannot be reversed.
    ii) The amount cannot be transferred to another GL account.
    Is it possible to clear the items without using any of the options listed above. Any SAP Note available?
    Regards,
    Asokan

    Check this link Re: Clear open Item

  • GRIR Clearing - Assigment Feild to be replaced by PO numbers.

    Dear Friends,
    We have a very peculiar situation, whereby in the GR/IR Clearing Account, the sort key was mentioned as 001 (Posting Date), instead of 014 - Purchase Order + Item. The result is that in the Assignment Feild instead of Purchase Order No. + Item, the Posting Dates have got populated. Now the users want to do the automatic clearing, but they are not able to do so becuse of this issue. To enable the GRIR Clearing we now need to replace the Assignment Feilds with the respective Purchase Orders Nos. + items. Is it possible to do the mass change ? Or is there any other way we can do the automatic clearing without replacing the Assignment Field? Going forward we have changed the sort key to 014.
    Your help would be highly appreciated.
    Regards

    Hi,
    Try BDC for FB02 with proper Logic assignment field, PO with Item for Old Line Items.
    We did the same way.
    Regards,
    Kishore

  • Pass single entry for GRIR clearing

    Dear Expert,
    I want single entry for GRIR clearing by F.13 in spite of multiple Clearing entries, can anyone tell me how to configure this?
    Regards,
    Saurabh Chaplot

    Hi
    System groups the items based on clearing criteria in OB74. The purpose of this setup is to correctly match the open items during clearing. If this is not the case, open items cannot be related to open Purchase orders. If this requirement is only for specific cases, then better use manual classic clearing transactions.

  • Cost center assignment of GRIR clearing account

    Hello Expert,
    There is a purchase order assigned to an asset.  the cost center K8071 is maintained in the asset. Later, the cost center is changed to K8410. Normally this cost center will always be determined from the asset. But in goods receipt (MIGO) and invoice verification (MIRO) , the wrong cost center K8071 is derived for GRIR clearing account. Can i get any help from you how to solve this issue? Thanks a lot!
    Best Regards,
    Ou Qin

    Hello,
    the cost center is really assigned to GRIR clearing item. It is standard system design.  if checking GRIR line item, the cost center is filled for invoice verification of asset PO.  Seems the function of derivation exists bug.  Can any one know how to  fix such error before? Thanks!
    Best Regards,
    Ou Qin

  • GRIR clearing documents

    we recorded the receipt of an additional 10 drink lids so the quantity received matched the quantity invoiced .I had hoped this would clear GRIR.  After processing the receipt of the 10 additional items, the total credit to GRIR per the PO receipts equals the total debit from the invoice posting, so the net amount in GRIR is zero, but there are no SAP clearing documents associated with these line items.  What else must be done to clear these transactions or have a  GRIR clearing documents?  Thanks

    you can go to f.13 and automatically clear the gr/ir account and this will create a clearing document.
    Assign points if helpful

  • Clear old files out of Project Package Contents

    Under project settings > Apple iOS > Package Contents are listed a ton of old files that have been removed / renamed etc. I can still check them off, but they no longer exist.
    How do I clear or refresh this list? All these files at one time lived in an "assets" folder that was included in the packaging. The assets folder still exists, but many of those files have been deleted. Sadly, the FlashBuilder UI doesn't seem to want to refresh and get rid of those old items. How can I do that?
    Thanks

    Hey Andy,
    I do not have a solution but I am having a similar problem. I opened up a project yesterday and the audio sequences were actually in pieces all out of order with large chunks missing. If someone has a solution, perhaps it will apply to both of these situations.

  • Clear recent items is broken in 10.8 (major privacy issue!)

    Clearing recent items is now completely broken under Mountain Lion.
    Try this experiment:
    1. Open an image in Preview.app.
    2. File > Open Recent > Clear Menu
    So is it gone now?  No!!! They are not gone.  You can still see what somebody previous viewed in that app by going to one of 2 places:
    1. Right-click the app's icon in the Dock and recent items are ALWAYS there, never cleared. 
    2. Use Mission Control to view Application Windows and you still see recent items at the bottom of your screen.
    Previously in Lion, this occured, but there was a workaround that involved clearing recent items, quitting the app, then relaunching the app, then the recent stuff wouldn't be visible anywhere.  This workaround no longer works.
    If you need to be guarenteed privacy with certain images like confidential bussiness documents, any embaressing photos or dirty pictures, do NOT upgrade to Mountain Lion because it will show those to anyone who happens to be nearby when you use Expose / Mission Control and you will not be able to work around it anymore.
    If by chance this is not a bug and was intended behavior, tell Apple to stop it (or find yourself a new operating sytem that doesn't violate privacy.)

    First, in response to Adrian Clarke's suggesetion of clearing the system-wide recents and that didn't work for me, but thanks.
    Regardless, I think I found a permenant solution for Preview (but not TextEdit).
    1. Go into ~/Library/Preferences
    2. Search the folder for the phrase "Preview"
    3. The first time I did the search, I found 3 or 4 things related to Apple's Preview application.  I deleted them all.
    4. Go to Terminal and type "killall Dock"
    NOTE:  Under Mountain Lion it appears (to me at least) the old "killall Dock" command does not always make the Dock relaunch automatically as it did in previous versions of OS X, so you might have to logout/login as well.
    Going back to look at them again hours later, not all the files have rebounded or been recreated.  So I can't tell you all their names exactly.  I can only tell you the names of the files that get remade, which again isn't all the files that I deleted.
    ~/Library/Preferences/com.apple.preview.LSSharedFileList.plist
    ~/Library/Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList .plist
    Again, the paths of the other files are lost since I didn't note them before deleting them, but just search your Preferences folder for "Preview".
    Now TextEdit was exhibiting the same undesierable behavior as well, so I tried doing the same for TextEdit:  Search preferences and deleting anything related to it.
    ~/Library/Preferences/com.apple.TextEdit.LSSharedFileList.plist
    ~/Library/Preferences/com.apple.TextEdit.LSSharedFileList.plist.lockfile
    ~/Library/Preferences/com.apple.TextEdit.plist
    ~/Library/Preferences/com.apple.TextEdit.plist.L2YUl2h
    ~/Library/Preferences/com.apple.TextEdit.plist.lockfile
    ~/Library/Preferences/com.apple.TextEdit.SandboxedPersistentURLs.LSSharedFileLis t.plist
    ~/Library/Preferences/com.apple.TextEdit.SandboxedPersistentURLs.LSSharedFileLis t.plist.lockfile
    After deleting them all and using TextEdit for a bit, the only files that rebounded were:
    ~/Library/Preferences/com.apple.TextEdit.LSSharedFileList.plist
    ~/Library/Preferences/com.apple.TextEdit.SandboxedPersistentURLs.LSSharedFileLis t.plist
    But does it work on TextEdit?  Sorta but not really.  It works until you perform a reboot, then the old problem returns, afflicting TextEdit again.  But Preview continues to behave correctly after a reboot.  Why these results are so inconsitent is truly confusing.  I suspect there's a bug (or multiple bugs).  If anybody can offer a solution for TextEdit, I'd be very appreciative.  In the meantime, if this bug affects you, maybe consider switching from TextEdit to another app until this gets fixed.

  • Im running out of space, how do I clear old content temp files

    Im running out of space, how do I clear old content temp files old apps?
    i have done the browser cache and cleared history.I am clearing items off the macbook pro but is there other areas i should clean
    Thanks

    Im running out of space, how do I clear old content temp files old apps?
    I'm not sure exactly what you're asking. Temp files get automatically deleted when you restart. Old apps you can either uninstall (if it was originally installed with an installer, there should be an uninstaller somewhere) or drag it to the trash. What's "old content"?
    i have done the browser cache and cleared history.
    This is not going to give you back much space.

  • Issue while clearing open items with a payment advice

    I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
    In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
    In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
    I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
    This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
    Thanks

    Include - MF05BFO0
    FORM op_pruefen
    Context:
              WHEN 'K'.
               ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
    Create an enhancement here and add this code
                   IF SY-TCODE = 'FB1K'.
                         T041A-AUGLV = 'AUSGZAHL'.
                   ENDIF.

Maybe you are looking for