GRN of QM-WM activated material

Hi All,
I have a material with WM and WM activated. What are the sequences of steps that I need to perform from after GRN - UD- till putting the stock in the Bin. After GRN the TR no and associated Inspection lot gets generated. after that I am bit confused. Please help me out with the transaction codes.
Many thanks in advance
Moderator message:
Locked. Please read SAP onlin ehelp where you can find the step by step process.
/if you have more specific question, please come back.
Edited by: Csaba Szommer on Feb 19, 2012 8:33 AM

Resolved by own.
Thanks

Similar Messages

GRN Without Maintaining Price in Material Master

Hi Experts,
We have activated the Split Valuation in Material Master and also put restriction in PO that without price maintaining in material user can not raise the PO.
Is there any option that we can prepare the PO or GRN without maintaining price in material master and system should pickup the price from PO itself to update the MAP.
Regards,
Manish Jain

Hi,
Naturally system will update the MAP after GRN and if your PO has info update indicator on in material TABof itee detail system
the price will be suggested as your PO price next ime when you create Order.
Regards

Profit center transfer price Without activated material ledger

Hi
May I use profit center transfer price without activated material ledger as well?
Regards

Hi Alaa
This OSS explain the Transfer Price Activation.
Note 122008 - Activate transfer pricesmult.valuation approaches
ML activation is a Must.
Arturo.

Activation Material Ledger with material working in price control "V"

Hi experts!
I have activated Material Ledger and I have a question about this..
1) Before the activation, I have for example a material with the next values in the "Accounting 1" tab:
Total stock = 7 UNI
Price Control = V
Moving price = 166 USD
Standard price = 166 USD
Total value = 1.162 USD (7 UNI*166 USD)
2) And after the Material Ledger activation, In the same material appears the next values in the "Accounting 1" tab.
Total stock = 7 UNI
Price Control = V
Standar price = 166 USD
Per.Unit price = 23,71 USD
Inventory value = 166 USD
I don´t understand if my total value before activation was 1.162 USD, when I have activated ML, the new value is 166 USD.
I dont´t understand why the value for the "Per.Unit price" is 23,71USD and not is 166 USD because this is the original value before ML activation..
I think that my inventory value must be the same before Material Ledger activation, (1.162 USD)???
Best Regards
Manuel

Hi Shaubhikg:
At first, thanks for your response.
I have founded another material wich has the next information before the material ledger activation:
In the Accounting 1 tab:
Price control: V
Moving price: 1.265,80 USD
Total stock: 5 UNI
Standard price: 553,00 USD
Total value: 6.329,00 USD
After the material Ledger production start up, the same material has the next information in USD:
Standard price: 553,00 USD
Per.unit price: 1.265,80 USD
Price control: V
Inventory value: 6.329,00 USD
In this case the total value of the stock is the same after and before to do the activation of ML. I think that this is good..
And can,t understand the example wich I saw you before.. In that case the Total value of the stock after activation Material Ledger is not the same that before activation..
The material doesn´t have any modification in his unit of measure..
Could you tell me someting about this issue??
Best regards!!
Manuel

Cancellation of GRN with QM procurement Active

Hi All,
   After receiving the goods(MIGO) in to QI stock,the QM procurement activated,now we are unable to move the stock to unrestricted nor cancel the GRN.
      For this GRN no Inspection lot generated,pls let me know how to use this stock or cancel the GRN
thanks in advance
Regards
Raj

Hi,
You should not activate insp type for an material if Quality insp stock (Not managed by insp lots ) is already existing for that material.
In plant level QM settings in SPRO , you have "insp type for insp stock " under Insp lot creation tab. Based on the insp type mentioned here , you can create insp lot for already existing insp stock while activating the insp type using transaction QA08.
Ref the help tips provided by SAP for the "Insp type for Insp stock " field.
Inspection Type for Available Stock in Quality Inspection
     The system creates inspection lots using the inspection type entered here, if quality inspection stock is available when a stock-relevant inspection type is activated. This applies to quality inspection stock, which is not managed by inspection lots.
     When activating using transaction QA08 "Mass change of QM inspection setup", inspection lots are created in the background that manage the already available inspection stock.
     The parameters to control inspection lot processing (for example, the quality score procedure) are copied from the default values of the inspection type entered here.
Hope this will helps you
Regards
K.M.Arun

Internal activity material cost not displayed in report s_alr_87013558

Hi all,
I have an material attached to the internal activity.
this internal activity is inturn attached to a network
which inturn attached to a WBS.
After the PR and PO creation of the material attached
the cost report s_alr_87013558 shows values in the
WBS element not in the network activity to the material
was attached
How to catch the cost value to network activity instead of WBS elment
Can anybody have a clue why it is happening
Thanks and Regards
pv

hi sreenivas,
thank you for the suggestion
in budget report the actual and commitment value is pulled
to respective network activity or wbs element depending upon the account assignment category during the automatic PR
creation from CJ20n
In my scenario during automatic PR creation it is Q(project make to order) instead of N(network).
Can you throw some light to this where in
i can generate auto PR with account assgnment category N
for a material attached to network through internal activity
Note:
to catch the cost we also need to activate the cost rel indicator in purchasing doc tab for material in cj20n
regards
pv

Error in Activating Material ledger

Hi experts,
I'm trying to activate the material ledger first time to the plant. Then an error is displaying. The error is
The value "001" was entered in the field "LFDNR"
This is not possible because it is a numeric field where only numbers may be entered.The length of the field is 000005.
Enter only numeric vallues in this field.
psl do favour to me.
Thanks
Reddy.P.S

Hi ,
Have you completed the following configuration :
1     Assign Currency Types to Material Ledger Type [OMX2]
2     Assign Material Ledger Types to Valuation Area [OMX3]
3     Maintain Number Ranges for Material Ledger Documents [OMX4]
4     Configure Dynamic Price Changes [OMX5]
5     Reasons for Price Changes
6     Define Movement Type Groups of Material Ledger [OMX7]
7     Assign Movement Type Groups of Material Ledger [OMX0]
8     Define Material Update Structure [OMX9]
9     Assign Material Update Structure to a Valuation Area [OMX8]
10     Activate Actual Cost Component Split [SPRO]
11     Activate Distribution of Usage Variances [SPRO]
For OMX1 .. what price determination you are using . Are you using "3" .
If you already have some other plant active , compare the configurations using transaction CKM9.
Once all configurations are completed , then only use CKMSTART.
Regards
Sarada

Material ledger activation in existing plant

Hey all
We have a plant in our Production client which was recently created. The materials in this plant have No released cost but we have PO's and movements in this plant.
Now we are planning to activate Material ledger for this plant. Can anyone advise me on the things that i need to take over of before activating material ledger. Like Closing PO's, MM period, the time of cost run after ML activation and all the Cutover activities that I need to take care of.

Hi,
You should activate ML at the beginning of the period. All open orders should be closed.
Please review note 596558. It contains all recommendations for activating Material Ledger.
Best regards,
Antje

Standard cost estimation after goods movement when material ledger is activ

Hi!
our client is activated material ledger, for some materials standard cost estimation is done till marking but not released.
goods movements have been posted for those materials.
Now system is not allowing to release the standar price for those material in the current period, as material ledger expects same price for entrie period.
what is the alternative way to update the standard price for those materials ( with out reversing the goods movements).
regs,
ramesh

Hi Ramesh,
When you are using Material Ledger, after goods movemnets for materials, no need to change the standard cost estimate as Actual costing run will take care to derive the PUP price.
If there is no standard cost estimation release for sold materials (e.g.FG), you will get an error message duirng the billing document release to accounting. To aviod this error, if you are using split valuation (valuation types) and mixing ratios (CK91N & CK94), try with the below steps:
Create a new valuation type for the same material
Crate CK11N & CK94,
Run CK11N
Run CK24.
Then release the billing document.
Let me know if you need more details.
Thanks & Regards,
ADI

Material Ledger activation (COML) - multiple plants in single company code.

Hi -
Material Ledger activation (COML)- multiple plants in single company code.
In large mfg plant - process industry (proposed to dived into number of production plants), Matrial 'a' is produced in plant 'a'.Material 'a' is input to procude matl 'B' in plant 'B"..so on and so forth.
We are activating Material Ledger (COML) for actual costing purpose. Question -During multi level price determination, will the variance of lower level materials ( produced in lowerlevel /other plants in our case) be rolled up to higher level materials (in a different plant). please let me know if it really works, if yes what are the guidelines (if any) .
Please advise ASAP.
Thanks
Chris
Edited by: Chris Farr on Oct 23, 2008 11:12 AM

Hi Chris,
from a business point of view there is a difference that you might take into consideration: The valauation level will always be on material and plant combination. That means, the division into several virtual plants will usually lead to different actual prices for the same material in each plant. That might happen for example when you carry over stocks from last month into the current month in one plant, while the other plant has only receipts from the current month.
That might me desired, but often it is not. If the mutiple plants are in reality only one location it might be hard to explain why the prices differ between plants.
best regards, Udo

Whether PO Creation,GRN & MIRO Possible for material w/o Profit Center ?

Hai SAP Gurus,
Whether PO Creation,GRN & MIRO Possible for material w/o Profit Center ?
1) I want control it. So no user can create a Master without profit Center even select Basic Data 1 & Basic Data 2..
kindly Guide me clearly

You asked a similar question in your previous thread
Re: Is it possible to Create Material Master without Profit Center ?
You can make the profit center field Mandatory , steps have been specified in the above thread.
Profit center field comes in "General plant data storage 2" view and "sales plant data" views only. so if a material is made with basic 1,2 views only , it wont come into the picture. But that shouldnt be a problem , coz its not Possible to create PO.GRN and MIRO for a material with only Basic views.
Raviraj

Batch management separately for packaging / fuel material

Hi experts,
to be very clear , batch management is activated for all type of materials like raw material and finished goods.
For packaging material and fuel material i didnt activate batch management.
my issue is to maintain batch for packaging and fuel material with batch no. separately.
if any customization or through any exits / badi ?
i also maintain for stock at batch level .
regards
dks

Hi,
If batch is not activated for Material type packaging / fuel material...and stock /PO/GRN/IV exists for those material, then its impossible to to acitivate batches for those materials whose stock /PO/GRN/IV exists ...
If you want to maintain batches for these material types then you have to reverse all documents and you have to clear all stocks, which will be tedious job.
Better from future when ever you create new material for those material types, then activate the batch management check box.

C+ 131 (Error message) material price will be negative

Hi
While transfering normal stock to project stock, system responding with error message as "material price will be determined negative value".
Material ledger is already activated - Material price indicator is "V" - e.g., if the material price is below 10$ while doing the MB1C: Stock transfer, system responding as said above. If i increase the material price using MR22, system is not giving any error message and allowing me to post. Here, material is spare part (procured from outside).
Is there any config settings which caused the error message ?
Please share your thoughts if anybody has faced this type of error earlier before.
Thanks in advance for your reply.
VVR

Dear Team,
While cancellation of GRN document system is showing the message like C+ 131 (Error message) material price will be negative.
As per the analysis the concern Po was belongs to 2008 the material price was 85 MAP.Gooda receipt completed on 22.04.2010.The qty of the gr document is 51.
Now we are unable to cancel the GRN document systemis showing the error message like the above mentioned.
Note: My MAP price 11 rs.I need to know howthe system is reduced this level.where i can see that.Kindly advice to proceed further.
Regards,
Suma Nalluri

Posting Actual Costs at Material Level

Hi All
For our standard costs we will have BOM Components, Activities from Routings and additive costs. We also have activated Material Ledger and will use it for Actual Costing, the objective being that each and every actual cost will be brought to the SKU level. For BOM components and activities that is no problem since it will be done through settlement.
However for cost components that have additive costs how do we settle them to the material ledger? Do we need to do MR22 for difference between standard and actual? Is there a way to do this through a template allocation or some other allocation method?
Thank you

Hi
Lets assume, you have Std cost of 100 USD involving Material + Labor and an additive cost of 10 USD entered manually from CK74N...
During production order processing - You would issue material components and confirm Labor hrs... Say, this amounts to 120 USD as against the std cost of 100 USD...
However, in prod orders, there will be nothing posted against the additive std cost of 10 USD... If you wish, you need to post it either through template allocation from some cost centers or use some assessment cycle or transfer manually from KB11N or use a costing sheet
Regards
Ajay M

Posting periods in material management

hi mm gurus,
i m fico guy, i need some help form ur side. the t.c. MMPV is closing the posting periods in MM is it right, then what is OMSY? as per as my knowledge in MM we have a chance to open only 2 periods, in OMSY the periods belogs open periods? or closed Perids?
my question in OMSY the periods belongs open or closed?
can u explain please.
thanqu

The T code OMSY is for Activating Material Management against a Company code.
Maintain the Material Master company code in OMSY.
This is done when you want :
1. To create a material master record, the control record must exist for the company code for which you want to create your master record.
2. To set up a company code, enter the current period here.
3. When changing the Allow backposting or Disallow backposting indicators
You can also use MMRV to set the Allow/Disallowed backposting indicators.
The current and previous period is shown on both transaction codes.
As MMPV is only Used for Opening / Closing MM Periods.
There are a number of activities that are managed by period in the materials ledger including: certain stock totals valuations, price units, goods movements, etc.
MMPV executes program RMMMPERI to close the current period and open the new one.
Please Go thru the Link :
http://www.sapcustomization.com/help/scr/OMSY-Maintaining%20Company%20Code%20for%20Materials%20Management.htm
Regards,
Ashok

GRN of QM-WM activated material

Similar Messages

Maybe you are looking for