Groove Agent 2, can it work with Logic Express 8?

I have Logic Express 8, and Steinberg Groove Agent 2. I was able to install it, but when I open Logic Express 8, Groove Agent 2 is not in my list of instruments.
When I installed Groove Agent 2, it did not ask me for my activation code, which I thought was strange.
Groove Agent 2 is an AU.
I have a White MacBook, 2.1 Intel, 4gigs RAM, and Leopard 10.5.8
Thank you in advance

I used to use GA2 on my PC (before I became a Mac user). Once I bought my Mac I got rid of my PC.
But the disc I have for GA2 has both the PC and Mac version on it, so it was working on my PC, but not on my Mac.
When I try to start it use it as a standalone on my Mac, it starts to load, then a message window appears and says: "No protection device is connected".
I never had this problem when I used to use it on my PC.

Similar Messages

  • Groove Agent 2 (3rd party plugin) with Logic

    Hi, I'm attempting to use Steinberg Groove Agent 2 (cool virtual drumbox) with Logic 7.1.0. (I saw a friend using them together via laptop on a gig, and I never had trouble using Spectrasonics Stylus with Logic so I assumed this should also work; I hope I wasn't dumb to try.)
    GA2 required a Steinberg key, which is now authorized. Thanks to a thread here, I found preferences>Start Logic AU Manager and enabled the plugin. When I load GA2 into an Audio Instrument, it shows up onsceen and plays. So far so good.
    Midi Output is enabled on GA2; this is supposed to allow a midifile of any GA drum pattern to be recorded into Logic. However, when I select the GA track in Logic and hit record, GA plays and Logic's meter flashes but Logic does not record midi data. (Of course Logic can record midi from my keyboard, but not from this plugin.)
    1) What do I need to do to record midi data output from a plug-in, such as this GA2, in Logic?
    GA2 manual suggests turning on the SysEx filter in the sequencer when running GA2, so that Run and Stop commands aren't written into the Midi part. (The midi part isn't recording to Logic yet, but: )
    2) How do I turn on the SysEx filter on this Audio Instrument in Logic?
    When I hit play in the Logic song, the GA2 starts playing. However, when I hit stop (key command, or mouse on stop) both Logic and GA2 often keep playing. (Of course without the GA2, Logic works fine.) Other mouse functions such as clicking mute buttons on the GA2 don't work reliably either.
    3) Why would Logic or the plugin ignore the mouse or stop command? How do I need to change my setup?
    Thanks for any help. I've used Logic for ten years, but Stylus was the only third party plugin I'd used & it was flawless.
    RJ

    I used to use GA2 on my PC (before I became a Mac user). Once I bought my Mac I got rid of my PC.
    But the disc I have for GA2 has both the PC and Mac version on it, so it was working on my PC, but not on my Mac.
    When I try to start it use it as a standalone on my Mac, it starts to load, then a message window appears and says: "No protection device is connected".
    I never had this problem when I used to use it on my PC.

  • I have East/West Symphony.  Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

    I have East/West Symphony. 
    Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
    Also, would it work with Garageband??

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • Does mainstage work with logic express 9

    hi ,  do all the features and plug-ins work with logic express 9 or are some features disabled .
    or are they not compatible at all
    thanks

    I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
    THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
    GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
    REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
    DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
    SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
    WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
    GOOD LUCK EVERYONE.

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

  • Mobilepre audio interface not working with logic express 8

    I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.I've tried every trouble shooting option in my apple pro training book like monitoring and audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
    in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
    I'm new to this apple discussions business and hope someone can help!!
    ps the interface works fine with garageband
    cheers c

    callummccall wrote:
    I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.
    Welcome to the wonderful world of M-Audio!!! Now, what you are doing is perfectly NORMAL. You need to hook up speakers to your audio interface. Where the little diagram says so:
    http://www.m-audio.com/layout/imgview.php?i=/images/en/connectivity/big/mobilepr eusbcd779px.gif
    See? The reason this is so, is because when you are using this interface, you are BOTH using the inputs AND outputs. Logic always works like this, it is a requirement to use "a full-duplex sound card" which means a sound card that has inputs and outputs.
    I've tried every trouble shooting option in my apple pro training book like monitoring and
    audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
    in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
    I'm new to this apple discussions business and hope someone can help!!
    ps the interface works fine with garageband
    cheers c
    M-audio blaming everyone else is not new, however, your "issue" is a user issue, not a gear issue.
    Cheers

  • Old USB Quattro interface--will it work with Logic Express 8?

    I have an old m-audio USB Quattro interface (4in/out) which I used with Cubase years ago. I have it hooked up to my wife's intel iMac with more than enough RAM. Logic seems to run fine, but I get a very weak signal through the interface. Apparently I have the correct driver. I don't mind buying a new interface if this one is not going to work, but the hard part may be in determining whether or not it will work. M-Audio doesn't seem to know (I'm less than thrilled with their support). Any experience or thoughts on this?
    thanks!

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • How to work with Logic Express 8 and Garageband 11 v.6.0.4?

    I just installed Logic Express 8 and I don't know what it's done to my existing Garageband files - they seem to have been overwritten into Logic folders. I don't seem to be able to open them in either program. I'm sure there are answers buried in the files here, but I'd appreciate a quick How To, please! Can't work.

    You need more to be sure the Digidesign core audio drivers are installed for your MBox, which are separate from the firmware upgrade.
    A standalone installer for the OS X (10.4) drivers can be found at:
    http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=24268
    While I'm glad to hear you're using Logic, your iMac should have no problem running ProTools LE. The current version, 7.3, has universal binary support for the new intel Macs .... dependign on the version you have, though, you may need to pay a small amount to upgrade to 7.3 The updaters for 7.3 also include the core audio driver package I mentioned above, and the ProTools LE 7.3 updaters can be found at:
    http://www.digidesign.com/index.cfm?navid=3&langid=100&eid=170&categoryid=36

  • Working with Logic Express and Sibelius Student

    Help! I just downloaded Sibelius 6 Student edition and my Logic Express 9 files are playing back with all voices as piano. What's the fix?

    Hi,
    you probably have to change the program select value at the start of each MIDI track and/or select another MIDI channel for this track.
    Fox

  • Getting Apple Loops to work with Logic Express 7.01

    i have logic express 7.0.1 and loads of apple loops. Cant get them to appear in the loop browser in Logic express. Can anybody please help?

    Drag and drop the folders into the loop browser.

  • Please help... jam packs not working with logic express 8

    my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
    You my also know that the jam packs work fine in Garage Band.

    Hi,
    on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
    However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
    You should do this not only now, but before and after every major update/change to your system.
    The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
    Fox

  • Behringer UCA200 not working with Logic

    I recently received a Behringer 1222FX mixing board for christmas. It came with a UCA200 which is a little RCA-USB product. I want to use this board with Logic 9 but i can't seem to get it to work. I added a track and selected Input 1 but when i hit record the only sound that was recorded was from the internal computer speakers.
    I have already tried the board with Garageband and it worked fine. I was wondering if anyone would steer me in the right direction and help me get this to work with Logic.
    Please note that this question maybe simple to answer as I am new to Logic.
    Thank You

    Chance has it I just tested the UCA-200, and its' quality is very clearly inferior to my ancient Macs' built in 16 bits audio. So don't use it, use the Macs' own built in audio instead. Chances are that the BIA of your Mac is 24 bits (which Mac do you have?), whereas the UCA200 is only 16 bits. That thing is only an improvement if you have an old PC with 8-bits audio. Sorry Uli (Behringer).
    regards, Erik.

  • Will the m-audio project mix i/o work with Logic X?

    Hi,
    I have a m-audio project mix i/o interface/control surface.
    Will this work with Logic X?
    Thanks,
    Mike

    If it works now on 10.8.4, then yes. This depends on OS X and drivers (if needed), not on Logic. Logic can only 'see' hardware that the OS can see.

  • 01v96i Yamaha...will it work with logic pro X

    I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
    Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

    I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
    Thanks

    it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
    Best
    Steve

Maybe you are looking for