Groove template from MIDI region inspector copy to piano roll

How do you do this? in logic 9, it just happened. In logic X, I can make as many groove templates from midi regions as I like in the inspector, but how do I get them to show up in piano roll so that I can make apply them in varying dgrees to other regions?
I asked this question a few months ago and no-one responded. Am i the only one who can't figure this out?

Select Audio Region
Click on the Show Flex Mode button
Select Flex mode from drop down selector in the track header..... (Change from Auto) and Quantize functionality in Region Inspector will reappear.

Similar Messages

  • Groove Template from Region

    I tried using a 2 bar MIDI region as suggested in the manual - converted to a Groove Template and it did in fact show up in the Quantize list. However, when I applied it to a region, it then only quantized the first 2 bars. Suggestions?
    Thanks Bark

    Select Audio Region
    Click on the Show Flex Mode button
    Select Flex mode from drop down selector in the track header..... (Change from Auto) and Quantize functionality in Region Inspector will reappear.

  • Moving groove templates from 9 to X

    Right now you can't create a groove template in Logic X for whatever reason (see this post).
    So, In the meantime, since making groove templates does work in Logic 9—how do I import a Logic 9 groove track into Logic X? I'm sure it's as easy as moving a file somewhere, but I have no idea about the directories.

    Hi, vmorse. Assuming you have an OS X-native application in which you'd like the pictures to open, all you need to do is drag and drop the icons of the pictures onto the icon of that OS X application. Or you can open the application by double-clicking on its icon, and then open the files from within it using the Open... command in its file menu.
    In OS X, to change the application in which the files will open when you double-click them, select an image file or files in the Finder, choose Get Info from the File menu, and choose the desired application in the Open With... pop-up menu in the Get Info box. If you want all files of the same type to open in the same application, click the Change All button below that menu.

  • Logic X crashes when trying to create groove template

    Hi,
    I've been trying to create a groove template from a small audio loop, but Logic consistently freezes and doesn't respond when i try and do this... im on Logic X 10.0.5.
    Thanks
    Chris

    Here's a workaround until this is fixed:
    Groove Template from Audio Region
    1. Select Audio Region and activate Flex Time, select slicing, leave quantise off
    2. Double click audio region to open editor,  leave in Track mode
    3. Manually Add Flex markers at all the transients
    4. Switch to Flex Pitch mode (this can be done from the Audio Editor window you are in)
    5. Still in the Audio editor go to the Edit menu and select ‘Create MIDI Track from Flex Pitch Data’
    6. Close the edit window, select the new MIDI region and choose ‘Make Groove Template’ from quantise menu

  • Why was the link button removed from the piano roll?

    Why was the LINK (chain) button removed from the piano roll? This makes Logic X useless to me as I can no longer compose or perform new lines based on previous midi performances. PLEASE BRING IT BACK!

    I miss that button too and just filled out the LX Feedback form (Menubar -> Logix Pro X-> Feedback) with the following text. Maybe if you guys did the same, we had a chance revive this essetial feature!!!
    thanks!
    Sebi
    Hi there,
    it seems as if the Link Button (Yellow chain symbol) has been removed from the piano roll for no reason. In Score View it is still there.
    I (and probably more users) absolutely NEED that Button to decouple the content of the piano roll from the selected track/region AND to use multiple piano roll windows with independent content.
    - For transscripting (Mute/Solo Audio regions while editing a Midi-Region)
    - For arranging. Edit 2 different midi regions both in separate Piano Roll windows
    - For recording. "Reading" Drum-Patterns while recording the Bass e.g.
    Please bring that button back or explain why it was removed
    Best regards,

  • MIDI regions won't play back in Logic X

    Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
    - I have done a restart of all my equipment, computer and Logic.
    - Nothing is muted - not the track or the regions.
    - The MIDI in/out in the piano roll is ON.
    - The channel strip setting is set to ON.
    - This applies to all instruments.
    - It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
    - MIDI channel are set to 1 (as seen in the event window).
    - Instrument channel is set to "all".
    Logic X 10.0.2
    OSX 10.8.4
    iMac early 2009
    2.66 GHz Intel Core Duo
    4 GB ram
    SATA disc
    M-Audio Fast Track Pro, with M-Audio Radium 49.
    Does anyone know what could be wrong? Any help is appreciated.
    Thanks!

    See if this is the problem.
    Is this an imported Logic 9 project file?
    Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

  • Separate midi drum channels not showing in piano roll, only kick

    hey ya'll!  I separated my midi drum notes on to separate mudi tracks. But now only the kick track shows up in the piano roll window.
    I am using AD and need to be able to edit the drum midi tracks. I use the piano roll window for this. Can someone help me?
    Jon

    You can select multiple regions in the arrange window and they will all show up in the piano roll. If you color each drum region a different color and select "region colors" in the piano roll view menu you can easily tell which regions are whoch.

  • Copy midi region problem

    I am copying a midi region (drums) from one song into another song and when I do it does not translate properly - notes get moved and other wierd bugs.I am cmdC and cmdV'ing. Am I missing something?

    could it be possible that you are not pasting to the exact location that you copied from? is the time signature the same? With both arrange windows open from both songs try dragging and dropping your regions to where you want them

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • How do you copy the templates from another webstie and use them as your own?

    Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver? I would like to know I am a newbie when it comes to this program so please make your statement understandable for me, thanks. Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.

    Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver?
    This is difficult to understand.   How are you copying templates from another site?
    If you have all the files that make up the template, then it's only a matter of saving all the files to a folder on your hard drive and setting up a site definition pointing to this folder.  You then work on the files as usual.
    Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.
    Without seeing the page it's difficult to judge what your problem is.  If possible, please upload the files to a remote server and provide a link to the page. It's the only way people can help - if they see your page in action.
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    Web Design & Development
    http://www.perrelink.com.au
    http://twitter.com/nadiap

  • Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Hi Charlotte,
    You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
    Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
    HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
    IE8 doesn't support HTML5.
    To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
    The above steps will hopefully fix your problem. If not, post here again please.

  • Copy Templates from VMM 2008 to VMM 2012 R2

    Hi,
    I would like to know if it was possible to copy Templates from VMM 2008 to VMM 2012 R2 ?
    Thank you

    I have never tried this, but you can for sure re-use the physical objects like VHD's, ISO's etc.
    The template configuration and profiles are metadata stored in the database.
    Based on how things changed with VMM 2012 compared with 2008, you will have several new options and capabilites in the profiles for 2012.
    I would recommend you to re-create those (hardware profiles, guest os profiles, application profiles etc) in 2012, as there is no logical mapping from the previous versions.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Copying/Moving new Motion 4 Templates from one computer to another

    I want to move added Motion Templates from my Mac Pro to my MacBook Pro to take on the road with me. These were originally created in Motion 3, I opened, converted and saved into Motion 4 and now need to copy them over.
    How do I do this accurately and wholly so they work fully on MacBook Pro?
    Thank you for any help

    User/Library/Application Support/Final Cut Studio/Motion/Templates

  • Copying dvd from different region

    I wanted to play a dvd on my macbook but it is a different region zone (2). I copied the movie to my hardrive using mactheripper.
    I still could not get the movie to start by choosing the video_ts file using the mac dvd player. Then I downloaded the program matinee and it tells me that there was an error when attempting to start the movie.
    Has anyone else out there experienced similar problems when trying to do this?
    Thanks in advance for any help

    dobes918...
    If you use VLC on a MacBook, VLC can only read DVDs from regions for which the DVD drive has been set. Older PowerBook models can use VLC to read DVDs from any region regardless of the DVD drive settings, but not the newer Intel Macs.
    Also, gligeen is looking for a region-free recorder, not just a region-free player. It's possible to get a high-quality DVD recorder whose firmware can be flashed to make it region-free. According to the folks over at the MTR forums (http://www.ripdifferent.com/phpbb2/index.php), the Pioneer 111-D (street price around $40) and a firewire enclosure (another $4)0 to hold the drive is the way to go.
    Pioneer drives tend to be of very good quality.

  • Beat Matching 2 MIDI Regions

    Hi,
    I have two midi drum regions - one has been recorded by hand to match the audio in my song, and the other has been taken from third party MIDI drum software as a basic MIDI drum pattern, which is exactly in time / quantised. What I want to do is to keep the timing of the hand recorded beat, but to use the drum pattern of the more accurate software pattern in my song. My question is, how would you go about doing this? Is there a quick way to achieve this?
    I basically want to replace the hand-played pattern with a more professionally played (interesting) one, but keep the timing of the hand-played one!
    Thanks for looking at this.
    Z

    Hi
    Try making a groove template of the "Hand" region, then apply it to the other region
    CCT

Maybe you are looking for

  • Error while importing music in iMovie 09 from iTunes 09

    Dear All, I need you help to solve a problem that drives me crazy. I have been working on a new projects for countless hours and had a lot of fun so far. This morning I updated the iTunes software and since then adding music seems impossible. The "+"

  • DB Adapter -Polling SQL and  After Read SQL:

    Hi.., I have DB adapter Configured for logical delete. Here is the SQLs Polling SQL: SELECT LOG_ID, ORG_ID, ROUTE, ATTRIBUTE9 FROM GETS_UX.GETS_UX_PROF_TRANS_LOG WHERE (((ROUTE = 'ERP INBOUND') AND (((ORG_ID = 123) OR (ORG_ID = 234)) OR (ORG_ID = 5))

  • CS3 AE: Problem with Template!

    I purchased a set of templates for After Effects-they appear to be precisely what I need what there is a strange problem. There are 14 slots on the timeline but number one repeats! The first image repeats at around 32 seconds...thus creating 15 image

  • UTF-16 and file names

    Hi, On Windows (2K & XP atleast) you can have file names containing characters that are represented using UTF-16. E.g. The unicode character \ubf3f (decimal equivalent 48959). Below is a snippet of code that attempts to create a file containing this

  • Apple tv & HD photos

    We take a lot of photos while on holidays and when we get back they look great in IPhoto slideshow on my Imac but as soon as I transfer them to IDVD for showing on my TV the quality difference is remarkable. I have a HD 1080 television. Will Apple Tv