Gross Weight in Delivery
Dear All,
I am facing a problem regarding gross weight in delivery.
I have created a material X and have done the posting.As per the posting , I got a batch number ABC .At this batch number ABC , I have given Gross Weight 2.95 MT.
So as per the scenario,this gross weight should come automatically in delivery.
But when I do the delivery ,this gross weight 2.95 MT is not coming automatically.Here automatically,it is coming 1 MT.
So plz suggest me that where I have to do the customizing so tht the gross weight as per the batch number comes automatically in delivery.
Plz treat on urgent basis.
Best regards,
Ankur
Edited by: Ankur Agrawal on Nov 24, 2008 8:29 PM
Dear All,
Plz suggest the answer.
Best regards,
Ankur
Similar Messages
-
Badi for updating Item Gross Weight (VL01N)
Hi All
I am using interface CHANGE_DELIVERY_ITEM and
FILL_DELIVERY_ITEM of defination name LE_SHP_DELIVERY_PROC to change the gross weight of delivery item. System is allowing me to change the gross weight in interface CHANGE_DELIVERY_ITEM but is not getting saved in the database.
Please Advice.
Ravindra SuvarnaHi!
I have not seen any hint, that this is not possible. But this is difficult to say without own test data, so you have to make some more checks.
Just place a break-point in your coding and debug a little bit starting with your new gross weight. Look, where it is overwritten again. Maybe it's very soon / easy to find. Think about watch points, too (but there can be a lot of different tables involved).
Regards,
Christian -
Reg Batch in delivery some items are not showing gross weight please help
please give me your help
in Deliveries some items are not showing gross weight
please give me some helpDear Ramsuresh,
Check are maintaining gross weight in the Master data of those items or not.
If not maintain in the Material master then create delivery
I hope it will help you
Regards,
Murali. -
Gross weight not picked in delivery created by vl10d.
Hi All,
I am creating background delivery for STO by tcode vl10d. For a particular material gross weight is maintained in material master but it is not geting displayed in gross weight field after creating delivery in loading tab. wat may the cause of this problem & how it can be removed???
urgent help reqd....
Thanx
Deepak KumarHi Deepak
It is flowing in sales order??
Thanks
G. Lakshmipathi -
Gross weight and net weight of line item in a delivery
Hi what exactly the meaning of gross weight and netweight of delivery line item?
Where can i see these 2 fields in the transaction?How weight differs to the quantity for a particular delivery item?
Thanks in advane
MaheshHi,
<b>Gross Weight</b>
The system can use the <b>gross weight</b> at a later stage, depending on what kind of capacity check you run, to check storage bin capacity for warehouse management purposes.
The system calculates the gross weight of each item by multiplying the delivery quantity by the gross weight per unit that comes from the sales order. If there is no related sales order, the system uses the gross weight from the material master record. You can change the gross weight manually in the delivery document.
<b>Net weight</b>
The total net weight of all items in the delivery.
Use
The system calculates the net weight of each item by multiplying the delivery quantity by the net weight per unit that comes from the sales order. If there is no related sales order, the system uses the net weight from the material master record.
Please reward if helpful.
Thanks & Regards
Sadhu Kishore -
How to get the gross weight of the material after packing in delivery ?
Hello,
We need to print the gross weight of the material after packing which includes packing material weight and target quantity weight for each material in the delivery.
From which table the gross weight of the material after packing can be retrieved.
Regards,
MohanHi Mohan,
You can go through the thread it may help you.
Pls help me in Packing
Regards,
V Srinivasan -
Same gross weight & net weight in delivery
Hi Gurus,
Why net weight and total weight is coming same in delivery?
In Delivery > Goto > Header > Loading > Total weight & Net weight
as I see difference in the gross weight & net weight in MMR.
What could be the reason?
Regards,
RakeshHi,
Chcek in VOV7, whether the field "Wght/Vol. Relevant" is flagged or not. It has to be flagged to calculate weight and volume for an item.
Regards
Vijay -
Weight of delivery showing zero
Hi Gurus
The issue we are facing is that in case of a few deliveries the Total weight of delivery is showing ZERO instead of sum of weight of all items. In fact the gross weight of first line item is also showing zero. I checked material master, but the weight is maintained correcly there. And also it is coming correctly in SO.
This generally happens in case of materials managend in batches. I searched forum and only got to know that one possible reason could be copy control . But if that is the problem then it should happen in case of all delvieries whcih is not the case.Dear,
As per your talk, I think there is only one reason ans that is material master. Please recheck material master.
Regards,
Sandip -
Manual Gross Weight from Handling Unit to Outbound Delviery
Hi Friends,
I have a question related to gross weight replication from HU to outbound delivery document. During delivery process, for packing, system calculates the gross weight on the basis of weight from the material master however the weight is not accuare and for that we modify the value with the actual gross weight of the physical packing. Now when return to the outbound delivery screen, system is not replicating the updated weight entered in HU and showing as blank value.
Please help, is this standard behaviour or how to correct the problem...we are using ECC5.0
Appreciate your support.
Best Regards,
GouthamHi Gaoutham,
This issue is related to suspicious development in user exit. I faced the same issue in an earlier project, where the HU weight is not changed manually when u go back to delivery screen. Finally developer had found the some Z table where it was mentioned like if sales organsation so and so... then it should not allow to change the weight manually and the remark was maintained as "X" in front of particular field.
Please try this and confirm.
Thanks & Regards,
Rahul Verulkar -
Gross Weight Unit of Measure (MARA-GEWEI) SAP ECC 6.0
Hi There,
We use something called IPC for sales over the Internet. IPC is showing the customers our materials from the material master in KG and we need to show them in LB. The reason this is happening is because the materials are created in Europe and there is an automatic creation of the material to our system in the US. We would like to know if there is something we can do in our system to convert the Gross Weight Unit from KG to LB in an automatic way using some kind of conversion rule? What does T006 has to do with this if there is any relationship?
Thanks for your help.
Luis.KG and LB belong both to dimesion MASS
KG is the SI unit.
in any unit belonging to dimension MASS you can enter a fix conversion rate to the SI unit KG.
this conversion will then automatically pulled if you enter the LB as alternative unit in your materials.
Further you can call a function module UNIT_CONVERSION_SIMPLE to convert from one unit to the other -
Standard report - Gross Weight sum by Purchase Order document
Hello,
Is there a standard SAP report that will give me the total Gross Weight for a Purchase Order?
I can find this information by going to SE16 - table EKPO - and doing a sum of Gross Weight (field BRGEW). However, I'm looking for a standard report that will give me this information as the user does not have SE16 access.
Any help would be greatly appreciated.Thank you for the information, however, I cannot specify a specific Purchasing Document in that transaction, nor does the transaction tell me what specific PO the weight is tied to.
-
Wrong Gross weight Calculate in Condition Base Value
Hi,
We are having SAP 4.7 and we are on patch level 28th.
In the Stock Transfer order Plant to Depot, we are entering freigh
condition ZFRG and for ZFRG we have kept Calculation Type - "D" - Gross
Weight.
Now while creating STO, System is calculating wrong Gross weight
in "Condition Based Value" for ZFRG condition type.
Kindly revert back with solution.
Thanks,
Samir BhattHi,
USE FMs SD_BONUS_READ and SD_BONUS_STAT_TARGET to fetch the values.
Babul. -
Where we can check the Confirmation of gross weight .
hi,
iam executing the fm SD_DELIVERY_UPDATE_PICKING_1 , in that i want Confirmation of gross weight and Confirmation of netweight values, can any body tell me where we can check that fields.
thanks in advance.not sure if this can help u
LIKP-NTGEW
LIKP-BTGEW -
Total weight in delivery document
Hi gurus,
1. how total weight in delivery document is determined when i am doing multiple orders in single delivery.
2. My requirement is to delete a delivery documnet but it was not deleting, i analised that " total weight in delivery document " usually determined " as "KG" but instead of "KG" UOM is determined as 3"(cubic inches).
anybody help me in this issue to solve this.
regards,
kishore.Dear Kishore
Your UoM in delivery will always flow based on the weight details you maintain in material master Basic Data 1.
In Delivery, you cant change the weight but can change in sale order.
Thanks
G. Lakshmipathi -
There is a issue with Material Master loading.for an already created material, if you reload as Alternative UoM same as the Base UoM it is erasing the gross weight.But when we load the same material (Alternative uom is same as of base uom) in another system but plant is different it is not erasing the gross weight.Is there any customizing we have to do to prevent this issue.
Wrong structure, this field is not used for many years. you have to have the gross weight in E1MARMM
If you create a material manually, then the gross weight from basic data view is just copied over into the alternative unit screen to the base unit., which is table MARM.
With the IDOC you have to do it the other way around. you need to provide the weight in the E1MARMM structure and the weight will appear in MARA and your basic data view too.
If you made the field in basic data view mandatory, then you should load the gross weight in both structures.
Maybe you are looking for
-
Sound problems with film made in iMovie when burned to DVD in iDVD
PLEASE HELP!!! I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to m
-
Not all my movie clips are showing up on the stage or playing
II have 8 movie clips in 8 separate layers on my stage; they are set to play one after the other. First problem - even though i can see them all on the stage in my Flash document, when i test the movie, only the first 5 clips are visible, and these a
-
Change script function, can you?
Hi everyone I got this script, function: change font size in selection but I want to change the function to selection text frames I mean: change the font size in all the selected text frames. thanks var the_document = app.documents.item(0); var the_s
-
Here is my issue. I have a main.swf and I load an external music player.swf. I need to stop the sound from the player.swf when I push a button on the main.swf. Not all buttons just some buttons. I now I will need to put the code in each button. Thank
-
Diasend Uploader program won't run?
Hi there, I have an HP Touchsmart 610-1010a, I am trying to run a program called Diasend uploader? It will download install and run fine on other peoples PCs but not mine. It is a 32 bit program so this may be part of the problem as I am running 64