Gross Weight, Net weight in Basic views

Hi,
I have encounter this issue where we have set Gross Weight, Net weight as mandatory in material master Basic view. It works fine when we create only the basic view, but when we create Basic view + Purchasing view, the Gross weight and net weight field become optional, anyone encounter the same before?
best rgds,

Hi Eric,
I think, u2018filed selectionu2019 setting is made at plant level.
Goto IMG, Logistic General, Material Master, Filed Selection, Define Plant specific filed selection and plant specific screen selection
Select your plant and see the 'Filed reference' for your plant.......... (A)
Now goto IMG, Logistic General, Material Master, Filed Selection, Maintain Field selection for data screens.
In this select your 'Field Selection Group' ... might be 22 and
And select Filed ref for your plant.... (A).
See whether filed selection for your plant is u2018Reqd Entryu2019 OR u2018Optional Entryu2019.
Rewards are helpful.

Similar Messages

  • Gross weight getting cleared

    There is a issue with Material Master loading.for an already created material, if you reload as Alternative UoM same as the Base UoM it is erasing the gross weight.But when we load the same material (Alternative uom is same as of base uom) in another system but plant is different it is not erasing the gross weight.Is there any customizing we have to do to prevent this issue.

    Wrong structure, this field is not used for many years. you have to have the gross weight in E1MARMM
    If you create a material manually, then the gross weight from basic data view is just copied over into the alternative unit  screen to  the base unit., which is table MARM.
    With the IDOC you have to do it the other way around. you need to provide the weight in the E1MARMM structure and the weight will appear in MARA and your basic data view too.
    If you made the field in basic data view mandatory, then you should load the gross weight in both structures.

  • Gross weight and net weight not getting copied from Inquiry to quotation

    Hai Gurus
    Could anyone tell me why gross weight & net weight for the particular quantity of goods are not getting copied to quotation and order from an inquiry. All other details that I maintain in an inquiry (shipping type, receiving point etc) are getting copied  to quotation.
    regards
    John
    Edited by: Gino12 on Nov 11, 2010 12:49 PM

    Dear
    Did you maintain in MM02-MMR-Sales/Plant  view Gross weight and Net wirght ??
    System calculates the net weight based on the order quantity for the item and the net weight proposed from the material master record. If the item has more than one schedule line, the system uses the total order quantity of all schedule lines to calculate the net weight. In sales documents where schedule lines are not allowed (contracts, for example), the system calculates the net weight using the target quantity.
    Regards
    JH

  • Required the Gross and Net weight

    Hi to All,
    Please help me on how to config or reqired the Gross weight and net weight in creation of material master in tcode MM01 (Sales: General/Plant)
    Thanks,
    Ermin D. Concepcion

    Hi,
    Please check with the following link you  can find the BDC Program to Upload Material Master Data (MM01)
    http://sapprograms.blogspot.com/2008/11/bdc-program-to-upload-material-master.html
    Thanks,
    Neelima.

  • Gross weight and net weight of line item in a delivery

    Hi what exactly the meaning of gross weight and netweight of delivery line item?
    Where can i see these 2 fields in the transaction?How weight differs to the quantity for a particular delivery item?
    Thanks in advane
    Mahesh

    Hi,
    <b>Gross Weight</b>
    The system can use the <b>gross weight</b> at a later stage, depending on what kind of capacity check you run, to check storage bin capacity for warehouse management purposes.
    The system calculates the gross weight of each item by multiplying the delivery quantity by the gross weight per unit that comes from the sales order. If there is no related sales order, the system uses the gross weight from the material master record. You can change the gross weight manually in the delivery document.
    <b>Net weight</b>
    The total net weight of all items in the delivery.
    Use
    The system calculates the net weight of each item by multiplying the delivery quantity by the net weight per unit that comes from the sales order. If there is no related sales order, the system uses the net weight from the material master record.
    Please reward if helpful.
    Thanks & Regards
    Sadhu Kishore

  • Capture Gross ,Tare & Net weights of each receipt in MIGO.

    Hi All
    The requirement is to capture Gross ,Tare & Net weights container wise for all Goods receipts .
    either in MM or WM , is this feature availabele on standard SAP or how is it possible.
    Thnaks in Advance
    Kind Regards
    Samson

    Hi,
    For Gross wt. Tare wt and Net wt. you have to go through the following process :
    Inbound Delivery        - VL31n  (Gross wt, what is printed on the invoice)
    GRN                            - MIGO( Net wt, what is the actual receipt)
    So the different between the both will give you the tare wt.
    If your industry is following the above mentioned process then it is possible to track or you can track the same through a development of report for your Weighbridge. Here what is done manually will be captured in the sap system.
    Hope this will clear your issue.
    T & R,
    Brijesh

  • Same gross weight & net weight in delivery

    Hi Gurus,
    Why net weight and total weight is coming same in delivery?
    In Delivery > Goto > Header > Loading > Total weight & Net weight
    as I see difference in  the gross weight & net weight in MMR.
    What could be the reason?
    Regards,
    Rakesh

    Hi,
    Chcek in VOV7, whether the field "Wght/Vol. Relevant" is flagged or not. It has to be flagged to calculate weight and volume for an item.
    Regards
    Vijay

  • Incorrect Net and Gross Weights in Sales Order

    Hi All,
    I have a problem with weights in sales orders. The Sales Order Qty is 8,725 KG but the Net and Gross Weight is calculated as 7,634.375 KG. Below are the details of my data/config.
    Material Master Data
    Base UOM in: KG
    Net Weight: 0
    Gross Weight: 0
    Gross Weight UOM: KG
    VOV7 Configuration
    Item Category TAC: Weight/Vol is checked
    Item is a configurable material. For non configurable materials we have the Net and Gross Weight entered in the Material Master but for configurable material the Net and Gross Weights are zero. Are these values calculated by VC? If yes, What do you think would be the problem in this case? Any help would be appreciated.
    SAP Version: ECC 6.0
    Thanks,
    sckr

    Goto to material master and check the field Order Unit .
    Check waht you have maintained there?
    Thanks& Regards
    Rasik Waghela

  • Updating picked quantity, gross and net-weight in delivery

    Hello Experts,
    I have created a program from which I am trying to update the picked quantity, gross and net-weights into an outbound delivery. This works in the normal scenario when the base UoM, sales UoM and the gross and net-weight UoMs are the same.
    However, when these UoMs are different, I have to carry out a conversion according to the UoM being used for each of the quantities mentioned. In such a scenario, the BAPI returns the following messages: -
    Error message: - Error in document 0080005487 item 00010 (quantity consistency check) [Message Class VLBAPI; Message Number 004]
    Warning message: -Quantities  0.0000000000000000E00 and  0.0000000000000000E00 cannot be represented by conv. factors 87,658 and 39,761 [Message Class VL; Message Number 266]
    The BAPI that I am using is BAPI_OUTB_DELIVERY_CHANGE.
    For the parameter ITEM_DATA, these are the values, that I am passing: -
    DELIV_NUM: - 80005487
    DELIV_ITEM: - 00010
    Material: - 30020596
    DLV_QTY: - 4
    DLV_QTY_IMUNIT: - 8.818
    FACT_UNIT_NOM: - 87658
    FACT_UNIT_DENOM: - 39761
    GROSS_WT: - 1.004
    NET_WEIGHT: - 0.004
    UNIT_OF_WT: - TO
    UNIT_OF_WT_ISO: - TNE
    SALES_UNIT: - KG
    SALES_UNIT_ISO: - KGM
    BASE_UOM: - LB
    MATERIAL_EXTERNAL:  - 30020596
    MATERIAL_GUID: - DD7B9B2F133B61F1B6DF0015C5891481
    Please note that the delivery I am trying to update has the following units: -
    Base UoM: - Lb
    Sales UoM: - Kg
    Gross & Nt Weight: - TO
    Please let me know if there is any other value in the item_data internal table or any other parameter of this BAPI that needs to be initialized.
    Please respond ASAP. I have been struggling with this issue for quite some time.
    Regards,
    Divyaman Singh Rawat

    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_outb_delivery_change&adv=false&sortby=cm_rnd_rankvalue
    Will help you out

  • Best way to update material gross weight

    Hello guys,
    I have a question, which is best to use to update material gross weight with an inbound interface? Proxy or Idoc?
    With proxy we have seen the function BAPI_MATERIAL_SAVEDATA.
    Wich kind of Idoc could be use? And what's the minimum information to send in the the idoc to update the material?
    Many thanks in advance.
    Regards,
    Xavier.

    Hello Mithun,
    I want to update the basic data of the material.
    What is the minimum data for Idoc MATMAS05?
    Regards,
    Xavier.

  • BAPI_MATERIAL_SAVEDATA  Gross weight BRGEW

    Hello,
    searched the forum and found older entries regarding transfer of the gross weight with BAPI_MATERIAL_SAVEDATA.
    But all adivises I read do not help.
    I am aware how to use the BAPI and the tables.
    So here the facts:
    Base unit of measure and net weight are passed with CLIENTDATA and corresponding CLIENTDATAX.
    As gross weight BRGEW is required field the error message appears.
    Logical until now.
    Now there is the table UNITSOFMEASURE and UNITSOFMEASUREX.
    They are for alternative unit of measures.
    Some posted to use that to fill gross weight.
    Ok. I fill the tables:   lw_MARM = UNITSOFMEASURE
        MOVE p_lw_data-meins TO lw_marm-alt_unit.
        MOVE p_lw_data-ntgew TO lw_marm-gross_wt.
        MOVE p_lw_data-gewei TO lw_marm-unit_of_wt.
        APPEND lw_marm TO p_lt_marm.
        MOVE p_lw_data-meins TO lw_marmx-alt_unit.
        MOVE c_charx TO lw_marmx-gross_wt.
        MOVE c_charx TO lw_marmx-unit_of_wt.
        APPEND lw_marmx TO p_lt_marmx.
    ==> Now the message M3332 appears.
    The alternative unit of measure is the same as the base unit of measure
    And yes it is of course the same. I do not want to enter an alternative one.
    Could the ISO code help?
    But it should not be the key really.
    I would be glad to get some answers on this.
    BR

    Hello,
    searched the forum and found older entries regarding transfer of the gross weight with BAPI_MATERIAL_SAVEDATA.
    But all adivises I read do not help.
    I am aware how to use the BAPI and the tables.
    So here the facts:
    Base unit of measure and net weight are passed with CLIENTDATA and corresponding CLIENTDATAX.
    As gross weight BRGEW is required field the error message appears.
    Logical until now.
    Now there is the table UNITSOFMEASURE and UNITSOFMEASUREX.
    They are for alternative unit of measures.
    Some posted to use that to fill gross weight.
    Ok. I fill the tables:   lw_MARM = UNITSOFMEASURE
        MOVE p_lw_data-meins TO lw_marm-alt_unit.
        MOVE p_lw_data-ntgew TO lw_marm-gross_wt.
        MOVE p_lw_data-gewei TO lw_marm-unit_of_wt.
        APPEND lw_marm TO p_lt_marm.
        MOVE p_lw_data-meins TO lw_marmx-alt_unit.
        MOVE c_charx TO lw_marmx-gross_wt.
        MOVE c_charx TO lw_marmx-unit_of_wt.
        APPEND lw_marmx TO p_lt_marmx.
    ==> Now the message M3332 appears.
    The alternative unit of measure is the same as the base unit of measure
    And yes it is of course the same. I do not want to enter an alternative one.
    Could the ISO code help?
    But it should not be the key really.
    I would be glad to get some answers on this.
    BR

  • Wrong Gross Weight for Material in Sales Order at Item Level (Shipping Tab)

    Dear All,
    Except MMR, where we maintain gross weight for material?
    Or, from where Gross weight gets detrmined in Sales Order at item level (Shipping Tab)?
    Details,
    I've 2 Materials in Sales Order, Mat1 and Mat2.
    In both the MMRs, Gross weight is 1.080 Kg
    In sales Order Mat1 has Qty 18,000 Kg and gross weight is 19,440 Kg --> which is right.
    Mat2 has Qty 2,160 Kg and gross weight is 2,332,800 Kg --> which is wrong.
    I tried with maintaing another line item with Mat2 in Sales Order, for which again wrong gross weight is calculated.
    I also tried with creating another Sales Order with Mat2, and again the same problem.
    Thanks for your help, in advance.
    Regds,
    Yogi.

    Hi,
    Thanks. That has already been checked by me, in Basic data1 --> Additional Data --> Unit of measurements
    everything is maintained correctly.
    What I have noticed is:
    Instead of obtaining Gross weight as 1.080 (which is maintained), somehow system is picking 1,080 (don't know why and from where)?
    Regds,
    yogi

  • Overwriting the Gross-Weight (E1VPDLI-BRGEW) from inbound idoc sdpiid01

    Hi All,
    We are creating document to update confirmation quatities in SAP with inbound idoc SDPICK.SDPIID01 from 3rd party system using XI. We have the correct Gross-Weight(E1VPDLI-BRGEW) in the Idoc, but while posting into SAP, the value getting over-write with I guess net weight. Does anybody know how to stop this Gross wt thing to overwtrie?? Any userexit that I could use for the same???
    Regards
    Navin

    .

  • Badi for updating Item Gross Weight  (VL01N)

    Hi All
    I am using interface CHANGE_DELIVERY_ITEM and
    FILL_DELIVERY_ITEM of defination name LE_SHP_DELIVERY_PROC to change the gross weight of delivery item.  System is allowing me to change the gross weight in interface CHANGE_DELIVERY_ITEM but is not getting saved in the database.
    Please Advice.
    Ravindra Suvarna

    Hi!
    I have not seen any hint, that this is not possible. But this is difficult to say without own test data, so you have to make some more checks.
    Just place a break-point in your coding and debug a little bit starting with your new gross weight. Look, where it is overwritten again. Maybe it's very soon / easy to find. Think about watch points, too (but there can be a lot of different tables involved).
    Regards,
    Christian

  • Gross Weight Unit of Measure (MARA-GEWEI) SAP ECC 6.0

    Hi There,
    We use something called IPC for sales over the Internet. IPC is showing the customers our materials from the material master in KG and we need to show them in LB. The reason this is happening is because the materials are created in Europe and there is an automatic creation of the material to our system in the US.  We would like to know if there is something we can do in our system to convert the Gross Weight Unit from KG to LB in an automatic way using some kind of conversion rule? What does T006 has to do with this if there is any relationship?
    Thanks for your help.
    Luis.

    KG and LB belong both to dimesion MASS
    KG is the SI unit.
    in any unit belonging to dimension MASS you can enter a fix conversion rate to the SI unit KG.
    this conversion will then automatically pulled if you enter the LB as alternative unit in your materials.
    Further you can call a function module UNIT_CONVERSION_SIMPLE  to convert from one unit to the other

Maybe you are looking for

  • Strange thing happend today when turning on my computer

    Hello, This morning when I turned on my computer, instead of the grey screen with the apple appearing, it stayed black, however, the light was on in the right hand corner (and it stayed on) and the fan was running loudly. It looked like it was sleepi

  • Can I link to images using absolute paths in HTML Help and still see them locally?

    I'm publishing HTML help pages to a Web server.  All .htm files on the Web server are in their own folder, and all image files are in a separate folder.  Links to images are generally of the form <img src="/images/clear.png" height="14" width="8">. 

  • Deploying 'Crystal Reports' on a 64 bit machine

    Hi, I am trying to deploy my application on a 64 bit machine. I am using Crystal Reports XI release 2. When I tried to deploy it ona 32 bit machine i simply added the CrystalReports11_5_NET_2005.msm file to my detup project and it worked. However, wh

  • Sony DCR-HC96 import problems

    I'm having problem trying to import my movies to iMovie 08 from my Sony DCR-HC96. I connect the camcorder to its dock, connect the power cable and the Firewire cable (i-link), switch on and fired up iMovie 08. I press the import button but it just te

  • Numero seriale cs3

    ho acquistato a suo tempo cs3 - ho acquistato l'upgrade di cs4, ho acquistato l'upgrade di cs5 extend - malauguratamente ho disinstallato tutto, ma purtroppo non trovo più il disco originale di cs3 e nemmeno il seriale, come faccio grazie - [email pr