Gross weight not picked in delivery created by vl10d.

Hi All,
I am creating background delivery for STO by tcode vl10d. For a particular material gross weight is maintained in material master but it is not geting displayed in gross weight field after creating delivery in loading tab. wat may the cause of this problem & how it can be removed???
urgent help reqd....
Thanx
Deepak Kumar

Hi Deepak
It is flowing in sales order??
Thanks
G. Lakshmipathi

Similar Messages

Business area is not picking into delivery.URGENT

Hi Guru,
I created order with 3 material one material belongs to different plant. So I created two delivery for one delivery business area is picking and for other business area is not picking in delivery document so I am unable to do PGI it's giving error message that Business area is requred for G/L acct.

hi,
not to confuse yourself. see these steps to determine the business area.
1. define the business area - ( link that with your division.)
IMG=ENTERPRISE STURCTURE = FINANCIAL ACCOUNTING= DEFINE BUSINESS AREA.
2. assign that your salea area. thru the same menu path but in assignment under sales and distribution.
3. maintain the rules by sales area as 2 for your sales area.
after all this, u try it , it will be determine your requirement.
reward points if it is useful.
regards
KR

Delivery date getting calculated wrongly in delivery created via VL10D

Hi Gurus,
We have a strange issue, where in delivery date is getting calculated wrongly for replenishment delivery created via VL10D.
When we are creating via VL10D , delivery date is getting the additional 30 days from MaxDlvCrteDate . With initial investigation i see that VL10D has delivery creation profile 0101 for which no of days maintained in max delv creation date is 30 .
I assume that the delivery date is getting the additional days from delivery creation profile felid no of max delv creation date .
I have created the delivery on 24.03.2011, as per the route no of TL time is 9 days , So Ideally the delivery date should be 04.04.2011 , however system has calculated it as 23.04.2011
Delivery no No of days in MaxDlvCrteDate Delivery date
213443158 30 23.04.2011
If I create the delivery for the same PO using t-code VL10B, then delivery date is calculating correctly.
Not sure why system behavior is strange.
Please help me with your inputs to resolve the issue..
Thanks in advance

Please request one Abaper to solve this problem.
You cannot due nothing as the problem is in Code.
Regards
William

Put quantity position of sales order not modifiable with delivery created

Hi experts,
Actually, in my sales orders positions it is possible to change the order quantity after I have the delivery created. (the delivery is not partial)
I need change this to make not possible modify the order quantity of sales order when I create the delivery.
Is it possible??
Thanks in advance

Hi
Go to t code OVAH and change the message application area V4 msg no 96 from warning to error
This will fulfill your requirement
Path to OVAH
img-SD-Sales-Sales documents--Define variable messages
Regards
Raja

Exchange sync not picking up appts created from Lotus Invitation

We have two iphones syncing with Exchange. Everything is working well except some calendar items. Appointments that were created by accepting a invite from a Lotus Notes user (via an attached .ics file) are not syncing. They appear correctly on the calendar in Outlook they just don't sync with the iphone. This problem started around 7/15/09 prior to that it worked okay.
Any suggestions?

Your responding much appreciated. Not aware that I need to make any changes re IPod settings. I frequently purchase/download music from I-Tunes and things have always run seamlessly, i.e. transferring the purchased songs into whatever playlists I want, or creating a new playlist and transferring songs from "purchased". Then the next sync between Ipod and pc picks up all the new additions. But not this time? So weird. I've changed nothing. So I don't know what I'm supposed to change (correct?) in order to get my new purchases onto the Ipod. Any further suggestions? I checked the link you gave me ... could see nothing more I could do. Cheers - Marg

Issue of multiple delivery created from VL10D

Hi,
I am creating deliveries using VL10D for multiple PO's with same customer and need one delivery to be created but its creating multiple delivery.
Please let me know what setting is causing the creation of multiple delivery.
Thanks.

Hi,
Process the purchase orders through VL04 transaction to create a single delivery for multiple PO's.
Regards,
Bharat

Gross Wt & Net Wt not copied from delivery to invoice in batch split

Hi Frnds,
We are appling a manual Header Frieght condition Type (HD00) to a delivery with batch split.
In the delivery this value(HD00) is splitted between line items based on Gross weight. But when we create the invoice for this delivery, the batch split line items do not have gross weight and net weight, and thus there is no value for HD00 in invoice.
Please provide us any pointers if you have encountered any such issue...
Many thanks in advance...
Regards,
Karthick C

Hi Karthick
This is expected in case of Batch split scenario, because in the sales order there is no batch split and in delivery there is batch split.
You create invoice w.r. to delivery, But in copy control, you have mentioned the price source as Order only.
Also the child items in the batch split are not relevant for billing and hence , if you see the item category of the child item in VOV7, u can see that it is not relevant for billing. Hence the value of the invoice having the line items alone will also be zero.
However the parent item will have gross weight and net weight in the screen.
If you maintain the price source as Order and Delivery, there is a possibility that you can get HD00 in invoice.The billing quantity in this case in copy control shoudl be either G or H. Based on this value, you can get either one invoice for both parent and child items or two different invoices one for parent and another for child items.

Schedule and Items program is not picking the new Billing lines created PN

Hi Gurus,
I am using version 11.5.10. I am populating the data into Property manager billing lines of lease thru API.
Once the Lines are inserted I am calling the Schedule and items program to for authorizatio.
My program is not picking up lines created thru API, I am trying copying the same line and inserting in billing tab and it works fine.
Looking forward to your suggestion/solution....

Hi,
I don't know but I think you call of the Schedule and items program is in a new session.
Then you must commit the data before you call the Schedule and items program

Gross weight and net weight of line item in a delivery

Hi what exactly the meaning of gross weight and netweight of delivery line item?
Where can i see these 2 fields in the transaction?How weight differs to the quantity for a particular delivery item?
Thanks in advane
Mahesh

Hi,
Gross Weight
The system can use the gross weight at a later stage, depending on what kind of capacity check you run, to check storage bin capacity for warehouse management purposes.
The system calculates the gross weight of each item by multiplying the delivery quantity by the gross weight per unit that comes from the sales order. If there is no related sales order, the system uses the gross weight from the material master record. You can change the gross weight manually in the delivery document.
Net weight
The total net weight of all items in the delivery.
Use
The system calculates the net weight of each item by multiplying the delivery quantity by the net weight per unit that comes from the sales order. If there is no related sales order, the system uses the net weight from the material master record.
Please reward if helpful.
Thanks & Regards
Sadhu Kishore

Gross weight getting cleared

There is a issue with Material Master loading.for an already created material, if you reload as Alternative UoM same as the Base UoM it is erasing the gross weight.But when we load the same material (Alternative uom is same as of base uom) in another system but plant is different it is not erasing the gross weight.Is there any customizing we have to do to prevent this issue.

Wrong structure, this field is not used for many years. you have to have the gross weight in E1MARMM
If you create a material manually, then the gross weight from basic data view is just copied over into the alternative unit screen to the base unit., which is table MARM.
With the IDOC you have to do it the other way around. you need to provide the weight in the E1MARMM structure and the weight will appear in MARA and your basic data view too.
If you made the field in basic data view mandatory, then you should load the gross weight in both structures.

Excise not picked in SO for new plant

Hai gurus,
Excise is not picked up while creating a sale order for a newly created plant. If I use a existing plant , Excise is picked in SO. I have maintained the condition record for the newly created plant also.
Can U say where I would have gone wrong.
Points will be rewarded.......
Regards,
vimal

Dear Vimal
I have already answered this question and your problem is solved. Can you please close this thread also if so.
thanks
G. Lakshmipathi

GPS not picking up signal

I have been having a problem with the google maps and google navigation since monday 10/01/12. On google maps my location is off anywhere from 40 ft to 1.5 miles. I have contacted both verizon customer support and what I could get from google and have done all the suggestions, including a factory reset and installing other gps software from the google play store to no avail. A few of the technicians that I have talked to have also experienced gps problems including location verification being off and not finding a gps signal also. Please let me know if the is a problem with the network or if it's a problem with the phone. As it is I am unable to use the gps navigation to travel and it has become a hinderence.

I have tried all that, with gps test app, I left it on for 5 minutes and nothing. and my gps radio is always on.
Date: Fri, 5 Oct 2012 05:00:50 -0600
From: [email protected]
To: (deleted personal information to comply with VZW ToS)
Subject: Re: GPS not picking up signal - Re: GPS not picking up signal
Re: GPS not picking up signal created by Ann154 in ThunderBolt by HTC - View the full discussion
Do you leave the GPS radio on all the time or turn it off when you aren't going to use for a while?
I leave mine on with my Tbolt and it usually locks on quickly. If it doesn't, then I make sure that I'm outside and open an application called GPS Test. I use this application to reset the Assisted GPS and to verify that the satellites are within range. The application will then lock my location within at most a couple of minutes and more like seconds.
Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community
Start a new discussion in ThunderBolt by HTC by email or at Verizon Wireless Community
(Removed personal information)
We respect your privacy. Please review our privacy policy for more information.
Not interested in these emails anymore, or want to change how often they come? Update your email preferences.
Message was edited by: Verizon Moderator (M)

Reg Batch in delivery some items are not showing gross weight please help

please give me your help
in Deliveries some items are not showing gross weight
please give me some help

Dear Ramsuresh,
Check are maintaining gross weight in the Master data of those items or not.
If not maintain in the Material master then create delivery
I hope it will help you
Regards,
Murali.

Gross Weight in Delivery

Dear All,
I am facing a problem regarding gross weight in delivery.
I have created a material X and have done the posting.As per the posting , I got a batch number ABC .At this batch number ABC , I have given Gross Weight 2.95 MT.
So as per the scenario,this gross weight should come automatically in delivery.
But when I do the delivery ,this gross weight 2.95 MT is not coming automatically.Here automatically,it is coming 1 MT.
So plz suggest me that where I have to do the customizing so tht the gross weight as per the batch number comes automatically in delivery.
Plz treat on urgent basis.
Best regards,
Ankur
Edited by: Ankur Agrawal on Nov 24, 2008 8:29 PM

Dear All,
Plz suggest the answer.
Best regards,
Ankur

Gross Price is not picked up upon creation of a requisition from a network!

Hi gurus,
I would like to seek for help, actually problem is related in SD but I pose this thread here because it is related in debugging issue.
do you know about "perform ROW_OUT " function? we have a bug that is very rare, when user select gross type with figures (ei. 1000, or any number).. system will not pick up the value instead it will be default in ZERO, but when user try to select again it output the correct expected result,,I debug it a dozen times but i cant catch the zero issue, *(-creating watch point wherein TBTWR = 0 and TBTWR <> 0 and the last point of intersection is in row_out sunction and MOVE-CORRESPONDING IX_ESLL to: ESLL) /* Is there someone OF you encountered this ?? if theres one please give some insight on how you pin point the problem in system .. note: all related program and process here is all standard (No custom program involve)..
Cheers,
Mark

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

Gross weight not picked in delivery created by vl10d.

Similar Messages

Maybe you are looking for