Group above master/detail report; page break causes repeat of master frame

Hi
I have a a group above master/detail report; when there is a page break part way through the master frame it causes the whole master frame to be repeated on the next page. I don't want this to happen, I just want the remainder of the master frame to be displayed on the next page. any ideas?
TIA

Hi
I've tried switching the "Page Protect" to No at the page level and the "Print Object On" is set to "First Page" but it doesn't solve the problem. The whole master frame is repeated on the next page when a page break occurs part way through. The master/detail Repeating Frame "Print Object On" is set to "Last Page".
Any other ideas?
TIA

Similar Messages

Master Detail Report Export to Excel/CSV

Hello,
Does anybody know how one may export a master detail report page - master is a html region, detail is a report region export to a csv file.
The only option I found i the layout and pagination - export csv option, but this generates just the report region...
Is there any possiblility to export the report as shown on screen to csv?
Thanx
Johann

Hi,
Limit the range of data to be exported and check any row missing.
Thanks & Regards,
Nagarajan

Master details report/form

Hi Friends,
I want to create a Master-Detail report/form.
I have one Master Table and it has 3 Detail tables.
Example:
Master Table: Members
Detail Tables: Contributions
Loans
Benefit ClaimsI want to show when I click on a specific Member in the report edit , I can make entry/update to all
the 3 detail tables. And not going each entry separately.
Is this design requirement good?
Thanks a lot

You can look here on how to create multiple detail tables:
http://htmldb.oracle.com/pls/otn/f?p=31517:163
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Master/Detail report on same page.

Hi, I am trying to put together a report (10g HTML DB) and can't seem to put together a master/detail report.
I would like to have a header, something like
Project Title -- Project Status etc... for each project. Then below this section
Project Detail 1
Project Detail 2
Project Detail 3
Loop through the projects
It's just two tables. projects and details. Details has a fk project.id.
I tried to do a Form -> Master Detail but it puts them on seperate pages and also allows the data to be edited. I don't need that, this is simply for display.
This is something I can put together just creating an html table in an anonymous PLSQL block but if ability is there in HTML DB I should probably try it that way.

Hi,
This can be achieved by doing something like the following:
Have a single SQL statement that joins the two tables together. eg,
select p.project_title,
d.project_detail1,
d.project_detail2,
etc
from projects p
inner join details d on d.project_id = p.project_id
This will provide a flat table with the project title in the first column for all records.
Then, in the Report Attributes, you need to switch on Column Breaks:
In the Break Formatting section, set Breaks to "First Column"
In the When displaying a break column use this format, enter #project_title#
In the Identify how you would like your breaks to be displayed, select "Repeat headings on break"
Finally, clear the "Show" tick for the project_title column
There's probably something you could do to improve formatting etc, but this should give you a start.
Regards
Andy

Master Detail Reports on the same page

hi experts. i need your assistance in one issue...
i have a master detail reports in one page. Master report displays all the products and details report shows their orders...
what i want is, when user clicks on products graph its detail graph show the orders of that particular record on the same page. Both reports would remain visible on the same page side by side.
if anyone can help?

Hi Asif48,
Just as Visakh suggest, we can add the master data and subreport in the same tablix, then set the visbility of subreport to toggle based on click action of master level row. And add some parameters to filter the related data based on the master report field.
For more details, please refer to the following steps:
Create another report as the subreport and insert some fields.
Create a parameter named Order in the subreport.
In the main report, right-click to insert a subreport in the column right of the master tablix.
Right-click the subpeort to open the Subreport Properties, and select the subreport name in the drop-down list.
In the left panel of the Subreport Properties dialog box, click Visibility.
Select Hide option, and select Product (master level row) to display the subreport to be toggled by the Product report item.
In the left panel of the Subreport Properties dialog box, click Parameters.
Select Order in the drop-down list of Name, and select [Product] (use the related filed name) in the drop-down list of Value.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Master-detail reports with variable number of pages in a big report

I am designing with Reports 6.0.5.32.0 a master-detail report such as a
combination between a customer with his name, address etc, at the top of
the page (always 60% of the first page) and then as details lines with his orders.
For one customer seems relatively OK with the variable number of pages in accordance with the number of his orders.
When the main query finds more customers I present always the customer at the top of
a new page (that's easy), but how can I control the number of the next pages for the orders, variable for every customer.
I can not predict how many pages are necessary for a customer and white pages are
not desirable. When the number of Max. Vertical Body Pages is too low I can get the next pages for every customer, but appears an
uncontrollable shift to the left.
For instance, a customer with 40 orders needs 3 pages, one with 4 orders only 1 page, one with 15 orders 2 pages, etc.
What's the magic property for a secure and precise layout?

Hi Andreas,
did you try setting vertical spacing to expand or variable on master repeating frame (and posible other frames surrounding master repeating frame)?
Hope this helps

HTTP 400 Bad Request error in master/detail report

Using APEX 3.2
I have master/detail report and thought all was working fine because the detail lines were less than 100. I increased the number of lines to 300 and then when the Save or Delete buttons are pressed, we get the HTTP 400 Bad Request error. I decreased the lines to 100 (about 32K) and everything works again.
Is there a size limitation on the detail? FYI - the header regeion is on the same page as the detail. If there is a size limitation, is there a way to increase this?
If you experts don't think the error is a result of the size, could there be another cause?
THANKS FOR YOUR HELP!
Sandie

Hi All,
Issue resolved:) ...that due to When calling a URL in the REST Receiver Channel, all GET variables are ignored
so we had to upgrade SP10 patch level 5 and all services are working as we expected.
Also pls check Note :2114322
Thanks,
Maheswarareddy

Repeating field values per paage in Master Detail Report

I know there are lots of threads about repeating fields values across pages but not seem to work that I have tried and I was looking for a simple resolution to my problem.
I have a master detail report like:
Deptno: 10 Dname: Accounting
Empno Surname Job Sal
1234 Smith Clerk 1000
1235 Jones Clerk 1200
Deptno: 20 Dname: Research
Empno Surname Job Sal
2234 Smith Clerk 1000
2235 Jones Clerk 1200
etc. The employee data is displayed in a Word table.
Now if I use the standard emp/dept tables (with only 14 employees) the report paginates properly and I see one department per page and the corresponding employees per page. I have used the <?split-by-page-break: ?> tag. A sample of the rtf file is:
<?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?split-by-page-break: ?>
<?end for-each?>
Everything works fine but if I then apply a larger xml file to this rtf where the number of employees spill over onto another page the deptno and the dname do not print before the table when I want them to.
I have tried putting things into Word headers, using the <?start:body?> tag and a couple of other ways (like @section). Could someone be quite explicit about the steps I need to follow (rather than just say put it in a header) to make sure that if the employees spill over the page the deptno and dname will display. I don't know if its made more difficult because I have multiple departments but any help would be appreciated.

I sent a template to Chris who was able to solve the problem.
The change that he made was from:
<?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?split-by-page-break: ?>
<?end for-each?>
to:
Dept: <?deptno?> Name: <?dname?>
<?start:body?><?for-each@section:dept?>
TABLE of EMPS (via insert -> table ->advanced etc)
<?end for-each?><?end body?>
That is, he used the start and end body tags and the section attribute and took out the <?split-by-page-break: ?> tag. I put back in the split page tag on the template he gave me but it gave me an extra page each time the department changed. So maybe you can really only use one of the other.
Regardless, Chris sorted it out for me, so thanks.

Master-detail report, hide detail on new search

Hi, I'm newbie, so I need help. I have Master-detail report on same page. Master is interactive report, detail is SQL report which use hidden item as condition.
For display detail data I use edit link. But I have problem when I make new search on master, detail still shows the old data.
Can somebody tell me, how can I hide details , when I make new search on master? Or set hidden item to null, when I make new search?
Example you can see in http://htmldb.oracle.com/pls/otn/f?p=51834:4 . Login : demo/demo
Thanks
Igor
PS: Sorry on my broken English

Hi,
This can be achieved by doing something like the following:
Have a single SQL statement that joins the two tables together. eg,
select p.project_title,
d.project_detail1,
d.project_detail2,
etc
from projects p
inner join details d on d.project_id = p.project_id
This will provide a flat table with the project title in the first column for all records.
Then, in the Report Attributes, you need to switch on Column Breaks:
In the Break Formatting section, set Breaks to "First Column"
In the When displaying a break column use this format, enter #project_title#
In the Identify how you would like your breaks to be displayed, select "Repeat headings on break"
Finally, clear the "Show" tick for the project_title column
There's probably something you could do to improve formatting etc, but this should give you a start.
Regards
Andy

Developer Mode Error: Stale Data -- Master Detail OAF Page

Dear Members,
I have created a simple master detail OAF Page by following the below steps:-
1/ Created a MasterEO
2/ Created a DetailEO
3/ Created a MasterDetailAO
4/ Created a MasterVO based on MasterEO
5/ Created a DetailVO based on DetailEO
6/ Created a MasterDetailVL (view link) based on MasterDetailAO
7/ Created an AM
7/ Attached the MasterVO and MasterDetailVL to the AM
8/ Created a simple Master Detail Page in which user can enter the master and detail records. After entering the details user can click on the save button.
Code in AM_
public void createHeader()
+{+
OAViewObject vo = getMasterVO1();
if (vo.getFetchedRowCount() == 0)
+{+
vo.setMaxFetchSize(0);
+}+
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
public void createLines()
+{+
OAViewObject vo = (OAViewObject)getDetailVO1();
if(!vo.isPreparedForExecution())
+{+
vo.setWhereClause("1=2");
vo.executeQuery();
+}+
vo.setWhereClause("1=2");
vo.setWhereClauseParams(null);
vo.executeQuery();
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
Code in ProcessRequest method of CO_
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("createHeader");
am.invokeMethod("createLines");
I am facing the below error when trying to save the master detail records in the respective OAF Page_
Developer Mode Error: Stale Data_
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The number of displayed records, 1, exceeds the actual number of records, 0, in view object AstfAM.DetailVO1. Some of the displayed records may have been deleted.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
I request the members to help me in resolving the above error.
Many thanks in advance.
Regards,
R4S.

Hi user11991972,
I just faced the same issue and I managed to fixed it using this thread:
Developer Mode Error: Stale Data
In my case, I amended the "Change indicator" checkbox on some of EO attributes.
One of the master attributes was updated by the AM from the detail page, but when navigating back, the master page was not refreshed due to a customer requirement.
But I wonder if it could be of any help in your case...
Regards,
Olivier

Master Detail Report for PDF Printing

Dear All,
       While trying to create a master detail report using Oracle APEX 4.2 and BI Publisher. I tried creating report queries and report layout following the below mentioned steps.
CREATE TYPE emp_row AS OBJECT (
EMPNO NUMBER(4),
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7,2),
COMM NUMBER(7,2)
CREATE TYPE emp_tab AS TABLE OF emp_row;
CREATE TYPE dept_row AS OBJECT (
DEPTNO NUMBER(2),
DNAME VARCHAR2(14),
LOC VARCHAR2(13),
EMP_LIST emp_tab
SELECT SYS_XMLAGG (
SYS_XMLGEN(
dept_row(
d.deptno, d.dname, d.loc,
CAST(MULTISET(SELECT e.empno, e.ename, e.job, e.mgr, e.hiredate, e.sal, e.comm
FROM emp e
WHERE e.deptno = d.deptno) AS emp_tab)
SYS.XMLGENFORMATtYPE.createFormat('DEPT')
) AS "XML_QUERY"
FROM dept d
WHERE d.deptno = 10;
Though the above steps generates xml output while trying to generate in APEX it says unsupported datatype. Tried using DBMS_LOB as well no luck. Any inputs will be quite helpful. Should there be any other way to incorporate master detail report printing in APEX kindly advise.
Thanks
Ahmed

Hi Ahmed_Jed,
Ahmed_Jed wrote:
Thanks Kiran for your prompt response. I tried following the steps already using this link (How To Create a Master-Detail PDF Report) somehow the detail record was not getting processed perhaps was trying to generate xml data using the above query. Any other reference will be highly appreciated.
Regards
Ahmed
    Well the problem lies here:
SELECT SYS_XMLAGG (
SYS_XMLGEN(
dept_row(
d.deptno, d.dname, d.loc,
CAST(MULTISET(SELECT e.empno, e.ename, e.job, e.mgr, e.hiredate, e.sal, e.comm
FROM emp e
WHERE e.deptno = d.deptno) AS emp_tab)
SYS.XMLGENFORMATtYPE.createFormat('DEPT')
) AS "XML_QUERY"
FROM dept d
WHERE d.deptno = 10;
    The Report Query itself generates XML data (in the required BI Publisher format). So, no need to generate it like this.
    As you are using table functions your query should be of the type:
SELECT EMPNO
            , ENAME
            , JOB
            , MGR
            , HIREDATE
            , SAL
            , COMM
    FROM TABLE ( EMP_PKG.GET_EMPLOYEES ( :PXX_DEPTNO ))
    where EMP_PKG.GET_EMPLOYEES is packaged table function which returns the Object Table of type EMP_TAB mentioned above.
    When you test the above Report Query with sample DEPTNO, it will generate the sample XML, which you can use to generate Report Layout in RTF format using BI Publisher Desktop.
    Hope this helps!
Regards,
Kiran

Master-Detail Report

Hi Gurus,
I am trying to implement master-detail report in single window without navigating to other window in OBI 10g by following the below link
http://108obiee.blogspot.in/2010/02/obiee-master-detail-requests-navigation.html
but i am facing problem in creating iframe column and including that column in the report
Can we achieve this requirement in OBI 10g if yes please suggest me how can we do this.
Thanks,

Hi Muram,
For implementing Master-detail for the product report when we click on Prod-Cat from master report(Year, Prod-Cat, Tot-Sales) it as to show the detail report (Prod-SubCat,Tot-Sales) in the same window without navigation to the other window for this scenario I implemented the steps as per the below URL which was send in the previous post.
http://obiee10grevisited.blogspot.in/2012/05/master-detailed-report-on-same-page.html
but I am facing problem in 5th,6th,7th steps could you please suggest me on these.
1>First I created master report with columns (Year, Prod-Cat, Tot-Sales)
2>Second I created detail report with columns(Prod-SubCat,Tot-Sales)
3>I have created two prompts Year and Prod-Cat
4>Now in the dashboard page I kept prompts and two reports in separate sections
5>To build intermediate report for validation which columns I have to take in that report and what I have to give in the fx.
6>In the detail report sections in the edit dashboard how to give the reference to the intermediate report and how to make the report not visible at the initial view of the user.
7>In the main report how to give the navigation to the same page which consist of main and detail report together we can navigation either main report or detail report how we can navigation which consist of both.
Thanks,
Rafi
Edited by: Rafi.B on Aug 29, 2012 11:42 AM

Master Detail Report + Tab navigation error

Hello All,
I built a master detail report and included a standard tab set. I built it with the wizard. When tabbing from the report page there is no problem. When tabbing from the associated master detail page you always get "web page not found" with this in the address bar-"http:///apex/wwv_flow.accept". I understand why you would not want to tab out from this type of page. Can anyone point me in the right direction to remove the tabs from view on this page. All my attempts want to remove the tabs at the application level. I am using the one level tab page template. Thanks ...

Wayne,
If you can put your application on apex.oracle.com and tell me how I can see this problem, that might be easiest. Just need your workspace name and application ID (plus instructions).
Scott

Master-Detail reports in Reports 6i

I am trying to write a master-detail report where the master record prints on the top of page one and the detail records print on the top of page two. They would repeat this for additional records.
Currently I have a repeating frame with two frames inside it (the repeating frame is on one page of the layout model). The top frame is for the master record (this is a regular frame) and the bottom frame is for the detail records (this is a repeating frame). I can get the detail records to print on the second page, but they print at the same position as in the layout model (towards the bottom of the page).
The question I have is how to get the detail records to print at the top of page two?
Thanks in advance

Hi Todd!
I had the similar task but implemented it a little bit differently. Try the following on the master record frame: set Vertical Elasticity to variable and create format trigger
function M_1FormatTrigger return boolean is
PAGE_NUM NUMBER;
begin
srw.get_page_num (page_num);
if mod(page_num,2)=0 then
return false;
end if;
return (TRUE);
end;
Both of this things should release space occupied by the master frame from the second/even pages and move detail frame up.
Regards,
Andrew Velichko
Brainbench MVP for Oracle Developer 2000
http://www.brainbench.com

Binds in Master/Detail Reports: Problems and Solutions

I've been trying to use bind variables in the master report of master/detail reports with multiple detail reports; but, I've been getting a problem with the detail reports not displaying data.
Here's a sample sequence of events:
1) Select the master/detail report under User Defined Reports.
2) Connect to a DB (if necessary).
3) Enter any value(s) for the bind(s) for the master report.
4) Select a row in the master report.
5) The currently selected detail report displays column names and data.
6) Select a different detail report.
7) Nothing displays except column names.
8) Select a different detail report.
9) Nothing displays except column names.
10) Click the currently selected row in the master report.
11) Now the current selected detail report displays (column names and) data.
I have found that if, I am more selective with my bind variable names, I can get things to work as expected.
First, let me show an example of some SQL that was giving me problems.
Master Report:
select distinct OWNER
from SYS.ALL_OBJECTS
where (OWNER like :OWNER or :OWNER is NULL)
Detail Reports:select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'INDEX'replacing 'INDEX' with other values for the other detail reports.
(I did have this problem with other SQL too but hopefully this SQL will run on everyone's DB.)
The first solution I found was to change the name of the bind in the master to something like OWNER_BIND.
The second solution I found was to change the master to
select distinct OWNER as POWNERand change the detail reports to
where OWNER = :POWNERAnother solution might be to adjust the bind variable names' case, but I didn't look at that.
While I was trying different things to get this to work, one of the goofy things that SQL Developer did was add <binds>s to the <query>s of the detail reports in my UserReports.xml. IIRC, it even did this to a master/detail report that I was not editing. So, if you run into this problem, you might want to open your UserReports.xml and clean it up by hand. (Actually, that might be good advice for other problems too.)
Tip: I've had other problems with my User Reports such as disappearing reports; so, not only do I regularly make copies my UserReports.xml, I also save report(s) into separate XML files and use Tools > Preferences... > Database > User Defined Extensions to add REPORT-type extensions to SQL Developer. (Kris Rice talked a bit about REPORT-type extensions in this blog entry: http://krisrice.blogspot.com/2006/11/xml-extension-points-reports.html)
FYI: I'm using sqldeveloper-1.1.2.2579 on Windows XP w/ SP2. The DB is Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.

Here is the complete XML exported from a problem report. If you want to use this, save it as an XML file then import that file from within SQL Developer (ie, right-click on User Defined Reports and choose Import).
Notice that there are <binds>s on the detail reports. They don't belong there; only the one on the master report belongs. (The <binds> is specified by the Binds tab when creating a report. They are for prompting the user for value(s) and you cannot do that in child reports.) Even if I removed the <binds>s from the detail reports before importing the XML file, I still see the problem. SQL Developer also ends up putting them back. I think that it might happen to each detail report individually as it is visited when using (ie, not editing) the master/detail report.
<?xml version="1.0" encoding="UTF-8" ?><displays><display id="" type="" style="Table" enable="true">
     <name><![CDATA[Sad]]></name>
     <description><![CDATA[]]></description>
     <tooltip><![CDATA[]]></tooltip>
     <drillclass><![CDATA[null]]></drillclass>
     <CustomValues>
          <TYPE>horizontal</TYPE>
     </CustomValues>
     <query>
          <sql><![CDATA[select distinct OWNER as OWNER
from SYS.ALL_OBJECTS
where (OWNER like :OWNER or :OWNER is NULL)]]></sql>
          <binds>
               <bind id="OWNER">
                    <prompt><![CDATA[OWNER (like)]]></prompt>
                    <value><![CDATA[NULL_VALUE]]></value>
               </bind>
          </binds>
     </query>
     <display id="null" type="Detail" style="Table" enable="true">
          <name><![CDATA[INDEX]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
          </CustomValues>
          <query>
               <sql><![CDATA[select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'INDEX']]></sql>
               <binds>
                    <bind id="OWNER">
                         <prompt><![CDATA[OWNER]]></prompt>
                         <tooltip><![CDATA[OWNER]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
     <display id="null" type="Detail" style="Table" enable="true">
          <name><![CDATA[PACKAGE]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
          </CustomValues>
          <query>
               <sql><![CDATA[select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'PACKAGE']]></sql>
               <binds>
                    <bind id="OWNER">
                         <prompt><![CDATA[OWNER]]></prompt>
                         <tooltip><![CDATA[OWNER]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
     <display id="null" type="Detail" style="Table" enable="true">
          <name><![CDATA[PACKAGE BODY]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
          </CustomValues>
          <query>
               <sql><![CDATA[select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'PACKAGE BODY']]></sql>
               <binds>
                    <bind id="OWNER">
                         <prompt><![CDATA[OWNER]]></prompt>
                         <tooltip><![CDATA[OWNER]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
     <display id="null" type="Detail" style="Table" enable="true">
          <name><![CDATA[SEQUENCE]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
          </CustomValues>
          <query>
               <sql><![CDATA[select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'SEQUENCE']]></sql>
               <binds>
                    <bind id="OWNER">
                         <prompt><![CDATA[OWNER]]></prompt>
                         <tooltip><![CDATA[OWNER]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
     <display id="null" type="Detail" style="Table" enable="true">
          <name><![CDATA[TABLE]]></name>
          <description><![CDATA[]]></description>
          <tooltip><![CDATA[]]></tooltip>
          <drillclass><![CDATA[null]]></drillclass>
          <CustomValues>
          </CustomValues>
          <query>
               <sql><![CDATA[select *
from SYS.ALL_OBJECTS
where OWNER = :OWNER
and OBJECT_TYPE = 'TABLE']]></sql>
               <binds>
                    <bind id="OWNER">
                         <prompt><![CDATA[OWNER]]></prompt>
                         <tooltip><![CDATA[OWNER]]></tooltip>
                         <value><![CDATA[NULL_VALUE]]></value>
                    </bind>
               </binds>
          </query>
     </display>
</display>
</displays>

Group above master/detail report; page break causes repeat of master frame

Similar Messages

Maybe you are looking for