Group activation for use

Typically how long does it take for the group to be activated for use after it has been approved? My group has been approved i.e members have been approved, but I still don't see my group name or any workspace name in either admin tool or workspaces? Do I need to wait?

We had an issue with the apex API due to a special character used by a user.
When did you create this group and what is the group name?
Thanks,
Jereen

Similar Messages

Is there a way to see if my stolen phone has been activated for use?

My iPhone was recently stolen. I have a feeling of who took it, but I can't prove it. I was wondering if I have the serial number is there a way to find out if it has been activated for use?

That would be between you and your carrier.
Did you report the iPhone as lost or stolen with your carrier?
If so, do you know if your carrier has a blacklist that prevents a phone from being re-activated with their network after being reported lost or stolen?

CDMA available only if iPhone 4S is sold and activated for use on a CDMA network.

CDMA available only if iPhone 4S is sold and activated for use on a CDMA network.

Yes. That's right.
Do you have a question?

Recording desktop activity for use in FCP

Greetings,
I need to record about a minute of desktop activity (browsing the internet on Safari) for a piece I am doing. I tried using one program that records desktop activity and converts it to a quicktime file but the finished product was no where near broadcast quality.
Any tips/suggestions would be much appreciated.

Though I've been a long-time user of SnapzPro I recently bought iShowU for recording desktop activity (as I couldn't get the results I needed from SnapzPro).
I've found iShowU excellent. Very, very fast and great quality in FCP. (Make sure, when capturing in iShowU that the capture size is consistent with your image size in FCP. Using just the Apple Intermediate Codec in iShowU did a great job for me.)
I recommend that you download and try the iShowU demo. You'll get a watermark until you buy but at least you'll know if it's for you.
BTW, I have nothing whatever to do with iShowU. In fact, I'm in Ireland and they're in New Zealand - on the other side of the planet!...
Hugh

Which Business Functions should be activated for China? (We have EHP6)

Hi Gurus,
We are in the process of planning SAP Rollout SD/FI/CO to China.
Which Business Functions are typical to be activated for using SAP in China?
(We have SAP ERP with EHP6)
Thanks+Regards
Dieter

Hi Mark,
Looking inside transation SFW5 (inside Enterprise Business Functions folder), my target FSCM components about FSCM are these in yellow:
Now, I see FIN_FSCM_CCD_INTEGRATION_3 has a dependency with FIN_FSCM_CCD_INTEGRATION. That means, just as you say, that I have to switch it on before number 3.
However, I need to raise these two questions:
1. There is no FIN_FSCM_CCD_3 at all inside SWF5, just INTEGRATION, is this important or not?
2. Do I have to switch on FIN_FSCM_INTEGRATION (before FIN_FSCM_CCD_INTEGRATION and FIN_FSCM_CCD_INTEGRATION_3).
I know it is a matter of Basic work, however I need to tell them which component to activate in order to have the latest functionality. And to be honest, I am not sure, mainly because I cannot find the FIN_FSCM_CCD nor FIN_FSCM_CCD_3 component in this installation, only ***INTEGRATION*** components. This is tricky.
Please, be as accurate as you can in your respond.
Thank you so much.
Wilson.

How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you

Overnight my contact list went from 1492 contacts to 52.. With help from Apple support I retrieved all of my contacts. Here is the problem, I lost the groups. None of my contacts are sorted into groups as they used to be which is very important for me.

Overnight my contact list went from 1492 to 52. With help from Apple I retrieved the missing contacts using Time Machine. The problems is that the contacts are not in groups as they used to be. Any suggestions? I really need them grouped for business reasons.
Also, there are no longer pictures associated with each contact.
thanks for any help anyone can give me getting contacts back into the groups that I had established. By the way, the group names are still there, but they are all empty.
thanks,
Sparky

What Mac do you have, with what version of OS X?

How to save groups-tabs for next time use?

I make some groups-tab by function of sites , like Email-group, News –group. If close FF beta 9, and option of startup is “show a blank page ” or “show my home page”, these groups were not be saved. If startup is “show my windows and tabs from last time”, all tabs of all groups will be opened, but they are own group.
There is some options, when I startup FF, only show groups, so I can choose which page in particular group I want open?

As you are using the new firefox 4 beta you may be interested in what is now a new default feature:
* see [[What is Panorama?]]
Many of the bookmark & home features are also the same or very similar to the previous version firefox 3.6. You can set a number of tabs to open as the home page, or you can set firefox to open with the previously open tabs.
* see [[How to set the home page]]
You may also save tabs in folder groups, if for instance you save those on the bookmarks toolbar, each would give you the option to open individual tabs from that folder or the whole folder. (You are permitted to nest folders, in several levels if it helps )
See also
* [[Bookmark folders]]
* [[Bookmarks]] & [[Bookmarks toolbar]]
Remember you have the choice to create and name folders as you like, and to a large extent put the folders wherever is convenient for the way you would like to work.
Note one difference between the versions is that the bookmarks Library
*Bookmarks -> Organise bookmarks
*has now become Bookmarks -> Show all bookmarks

Is there a process for using Detail Group Regions?

Hi Guys,
I have a question regarding dynamically displaying stacked detail groups. I want to display a detail group depending on a value that is set in the master group.
The documentation surrounding the Detail Group Regions is vague. Is there a set process on how to do this or even a documented case on how to get it to work? We have tried using Detail Group Regions but when we did the form of the master group was not displayed.
Regards
Bar
JHS: 10.1.3.2.51
JDev: 10.1.3.2.0.4066

Steven,
Below is a stripped down version of my app def including the group layout settings. Even with no rendered expression only the relationship and address detail groups appear (person and organization are missing), and instead of the SeachDetails/SearchCriteria form fields the organization table appears above the detail groups.
If I create detail group regions for all four detail groups then no detail groups are displayed and its the address table that appears instead of the form fields.
Regards,
Bar
<Service name="MainAppModule">
--<Group layoutStyle="table-form" name="main_Search">
----<RegionContainer name="Regions">
------<ItemRegion name="SearchDetails">
--------<Item/><Item/>
------</ItemRegion>
------<ItemRegion name="SearchCriteria">
--------<Item/><Item/><Item/><Item/>
------</ItemRegion>
------<GroupRegion name="main_PersonGroupRegion" groupName="main_Person" title="Person Group Region"/>
------<GroupRegion name="main_OrganizationGroupRegion" groupName="main_Organization" title="Organization group Region"/>
----</RegionContainer>
----<Group layoutStyle="table-form" samePage="true" name="main_Person">
------<Item/>
------<RegionContainer name="Regions">
--------<ItemRegion name="PersonRecord">
----------<Item/><Item/>
--------</ItemRegion>
--------<ItemRegion name="PersonDetails">
----------<Item/><Item/><Item/><Item/>
--------</ItemRegion>
------</RegionContainer>
----</Group>
----<Group layoutStyle="table-form" samePage="true" name="main_Organization">
------<Item/>
------<RegionContainer name="Regions">
--------<ItemRegion name="PersonRecord">
----------<Item/><Item/>
--------</ItemRegion>
--------<ItemRegion name="PersonDetails">
----------<Item/><Item/><Item/><Item/>
--------</ItemRegion>
------</RegionContainer>
----</Group>
----<Group layoutStyle="table-form" samePage="true" name="main_Relationship">
------<Item/>
------<RegionContainer name="Regions">
--------<ItemRegion name="RelationshipRecord">
----------<Item/><Item/>
--------</ItemRegion>
--------<ItemRegion name="RelationshipDetails">
----------<Item/><Item/><Item/><Item/>
--------</ItemRegion>
------</RegionContainer>
----</Group>
----<Group layoutStyle="table-form" samePage="true" name="main_Address">
------<Item/>
------<RegionContainer name="Regions">
--------<ItemRegion name="AddressRecord">
----------<Item/><Item/>
--------</ItemRegion>
--------<ItemRegion name="AddressDetails">
----------<Item/><Item/><Item/><Item/>
--------</ItemRegion>
------</RegionContainer>
----</Group>
--</Group>
</Service>

How are Tab Groups superior to using windows for tab groupings?

With Mac OS 10.5 I have been using windows as a defacto method for tab groupings. When tabs get two crowded, I open a new window. I have to move between windows to get to all tabs in a group.
The Tab Grouping instructions don't address moving tabs from multiple windows into a single large group, say, for charts on a large number of stocks.
[A disadvantage with my multiple window system has been my occasional misstep, e.g., closing a window full of tabs with the red button when I intended to minimize the widow with the yellow button, or, worse, when I get the option after a Firefox crash or power loss to Restore windows and tabs or Start a New Session and I hit the Start New session Button; in either event I lose the tabs and/or windows affected.]

I don't ever use it because I think it is odd to have tabs floating around my desktop but you can drag Snippets, Connections and Reports outside the SQL Developer Window - Detail tabs and the Worksheet can't be. Not sure if this works on a Mac or if this is what you were looking for but wanted to mention it.
-- Sharon

I recently updated to Lion and iCloud and am unable to send a group email for my blog using BCC. When I try to do so, the email goes directly to draft. Please help.

How can I send a group email for my blog to using BCC on my mail program?

Don't use bcc, use cc instead. Better yet create a new group in Address Book, put the contacts you want into the group, then when you email select the group in the To: field instead of putting in individual email addresses.

I want to buy the new ipad3 wifi cellular, but will bring it back to Africa for use without first activating AT

I want to buy the new ipad3 wifi cellular, but will bring it back to Africa for use without first activating AT

OK....you can do that. I would recommend the GSM version (AT&T), but you can buy it here and activate there. Lot's of people do.......

TS1702 I downloaded a free Merriam-Webster dictionary app for use on my iphone 5. I thought I executed the steps to download it properly...I do see it in my App Store 'purchased' list, but I don't see it actually activated and ready for use anywhere...he

I downloaded a free Merriam-Webster Dictionary app for use on my iphone 5. I thought I followed the download process properly, but cannot see that the app is launched on my phone. I have checked my phone for 'updates' and the app is listed among the ones I have purchased. I clicked on it and it began installing, however, it still has not launched. I get a message screen to sign in with my Apple ID, which I tried, and I get the message that I have purchased this app and it will download. When I try to sign in, I get the message that it can't connect to the itunes store and to retry. I've done that several times without any luck...not sure where else to look for the 'working' app. I did try re-booting the phone...even did a 'hard reset' to no avail...help?

Anything* >.<

Limitation on source group with services using ip address range

Hello,
I have an interface on CSS which I regard as public and another interface I regard as private. On the private interface is a server farm with private ip addresses. Since the server admin guys insisted the servers need to access internet just for Windows Update, I made a source group to NAT the private addresses to public addresses to allow the servers to access internet.
I defined services for use by the source group. Since keepalive is not important in this case, I set keepalive none to ,I hope so, save system resources.
I have server 192.168.1.1-5 (5 servers) and 192.168.1.11-14 (4 servers), so I made a service with ip address 192.168.1.1 range 5 and another service 192.168.1.11 range 4.
But then I found that the two services cannot be put in the same source group. It is because of the different range in the service definition.
I can get it work if I define services with single ip address, but then I will have a long configuration with repetative information. And I think this may be using more system resources.
I can also get it work if I include 192.168.11.15 and define two services both with a range of 5 ip addresses. But 192.168.11.15 is not actually there.
Why is there such a limitation on source group, or services with ip address range? Is there the same limitation for content rules? Or am I getting it all wrong and should do the configuration in other ways?
Advices will be welcomed.
CT Yau
Hong Kong

Yes you are correct. There is a limitation while adding services into source groups.
You can create as many services that share an ip range (eg. a /24 subnet range). But the trouble starts when you add them into source groups. You can not add them into a source group NOR you can add them under different source groups as well.
You mentioned that you can use single ip adress instead of range for the services...but it is not true as you will be stuck when you add them into source groups.
I can think of these following options in your case.
Option 1
Change the ip range on the servers. Use 2 different IP ranges one for those 5 servers and another for those 4 servers.
Create 2 services for each range.
Create 2 groups and add the services.
service server-out-192.168.1.1-5
ip address 192.168.1.1 range 5
active
service server-out-172.168.1.11-14
ip address 192.168.1.11 range 4
active
group server-out-192.168.1.11-14
vip address x.x.x.1
add server-out-192.168.1.1-5
active
group server-out-172.168.1.11-14
vip address x.x.x.2
add server-out-172.168.1.11-14
active
Option 2
Create a service that includes all the ip addresses starting from 192.168.1.1 through .14 using the range keyword.
Now you need to create one source group with a VIP. Add the service to the source group.
If you do not want to cover the unassigned ip addresses just move them up and use consecutive ones.
service server-out-192.168.1.1-14
ip address 192.168.1.1 range 14
active
group server-out-192.168.1.11-14
vip address x.x.x.x
add service server-out-192.168.1.1-14
active
thanks

How to track changes made to a group owner for Distribution/Security Group in FIM 20101 R2?

We have a requirement where we have to send a consolidated email to the new group owner which lists all the groups that are tagged to him/her.
This requirement is needed so that the new group owner can be notified of the groups that he/she owns. Group owner information can be updated in AD which would then sync with FIM, Bulk updates for groups in FIM.
So first we would have to basically track the group owner change in FIM, retrieve the owner information, then list all the groups listed under him, consolidate an email and trigger the notification.
Can someone help me and let me know how this can be achieved?
Thanks in advance!!

Hello,
you can not do with only OOB functions. You will need a custom activity to enumerate all group a specific persons owns.
First part is easy, create a MPR which triggers a workflow activity on owner attribute changes.
The custom activity should then search for all groups new owner owns in addition.
Pass that information through the WorklowDictionary to a notification activity.
If your are not familar with developing workflow activities you could use PowerShell Activity for example.
/Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Group activation for use

Similar Messages

Maybe you are looking for