Group Added With dscl Command Not Listed In Account Prefs

I added groups for each user per article 307128 using the dscl command:
sudo dscl . create /Groups/username GroupMembership username
sudo dscl . change /Groups/username RecordName username _username
But these new groups are not listed by the Account preferences on my new MacBook. They are listed on my iMac G4. Both machines are running 10.5.2. The accounts on the new MacBook were migrated from the iMac.
A dscl list shows that the groups are defined:
sudo dscl . list /Groups
And when I try to add a new group called _username with Account preferences I get an error saying the name is in use.
Any idea how to get Account preferences to show these groups?
Thanks.

ovithucu, in your contacts app, swipe down from the top bezel to Settings.
In the list of "Show Account in Contacts List", turn OFF each account shown, leaving none ON.
Tap the lower left BACK button.
Now, back in the main Contacts view, drag down on the screen to see the total number of contacts, what number is there?
Those are you "Local" contacts, stored locally in the device memory. Those can be cleared if you want, and start all over again.
Also, check your gmail account on a PC, login and see how many contacts you have in gmail which should be sycning to the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Fonts installed with windows are not listed in acrobat 8 professional

Fonts installed with windows are not listed in acrobat 8 pro, what do you need to do to make them availabe in the program

If you have Word installed, make a simple PDF from Word that has text set in Tahoma, then print to the 'Adobe PDF' printer. Open the PDF file you just created, then hit Ctrl-D. In the Fonts tab you will see what font the PDF file want to use and what font it actually uses.

App. automatically launches, but not listed in accounts/startup items

I have a pesky application which automatically launches on start-up, yet it's not listed in accounts/startup items. It's called Microtek scanner finder. I seem to remember it started doing it when I originally got the scanner and installed software, and although it's always niggled I didn't mind when I was using the scanner. However, I'm not using the scanner anymore so want to be rid of it in my dock. Where the heck is it coming from? I don't want to chuck all the software as there may be an occasion where I need to scan a transparency, when I'll need to get the old scanner down from the loft... any ideas? It definitely launches as there is a little black triangle beneath the icon in the dock. If I quit it, it disappears but is back there again on another start-up grrrrr.

Hi, Kathykate. I have a similar Epson Scanner Monitor application that starts up each time I restart my computer. (Mine does appear in Sys Prefs > Accounts > my account > Startup Items, so I could delete it from there if I wanted to.) It runs all the time in the background, using a tiny amount of CPU and memory, and it has no user interface at all: If I quit it, nothing visibly changes, and if I open it again, there's no visible sign that it's open (including no icon in the dock for it). Its only function is to detect my Epson Scanner when I plug it in and turn it on. I ignore it the rest of the time, because whether it's running or not has no impact whatsoever on anything I do. I suggest that you take the same attitude toward your Microtek app.

Groups created with dscl not showing in WGM?

When creating a group "testGroup1" via dscl as follows ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
The group shows up when running ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
However, in Workgroup Manager the new created group"testGroup1" does not exist.
Is there a way to determine where exactly the newly created Group is located?
I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
Does the 127.0.0.1 have something to do with it?
Also, if I try to run the following ...
      Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
I know it's there because it shows when I run a different tool called Ldapmanager.
But for some reason it's not showing in Workgroup Manager.
I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
Any help would be greatly appreciated.
Thanks,
Zeek

Hi David
There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
Follow this path and set up the document type of your outbound delivery in it
Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction

AD security groups listed in user groups in Config Manager however not listed when selecting values for the "System Resource - System Group Name" query

Morning All,
We are in the process of setting up our SCCM 2012 infrastructure and are experiencing issues with our device collection querys based on AD security groups.
I can see the security groups are being updated per adsgdis.log - i can see the computers that are members of the groups in AD are being recorded in the same log. Issue is when we build the device collection query - click the value button for the string,
only 2 of the 18 AD security groups are displayed. These are 2 AD groups we setup initially to test.
We have since added several additional yet they only appear to populate as user groups in config manager.
The same goes for additional OUs that we have created with AD.
When i click the value button only the initial 10 OUs that were created are populating in the list of applicable OUs.
We have the discovery methods Group Discovery & System Discovery enabled and set to search the parent OU recursively
I'm wondering if there might be an SQL issue with this as it initially worked but stopped...
Additionally we added an OU recently that now appears in in the Values options in the query but the ones added previously and additionally after are not showing up....
Any help is appreciated.
Thanks,
Jeff

Given the adsgdis.log lists the new pc and the group it's assigned to it appears the AD group discovery is working.
Have the following excert from the adsgdis.log
INFO: Processing discovered group object with ADsPath = 'LDAP://************.****.COM/CN=Software - Microsoft Project Professional 2010 x64,OU=Software,OU=US-West,DC=*****,DC=com' SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180
(0x1FF4)
INFO: DDR was written for group '*****\Software - Microsoft Project Professional 2010 x64' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\userddrsonly\asg8ud94.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012
7:08:13 AM 8180 (0x1FF4)
INFO: DDR was written for system 'THURMANWIN7VM' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\adhh8419.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180 (0x1FF4)
Here you can see it processes the new members in the Software - Microsoft Project Professional 2010 x64 group and captures Thurmanwin7vm as a member.
I did find some log entries that reference permission issues with objects in the SQL database and have opened a case with MS to get that looked into. Hopefully that will be where the issue lies.

How to use the bootp_enabled key with dscl command create

During Netboot service configuration I wanted to do it right and followed the suggestions in "System Imaging and Software Update Administration" (page 22):
+"To prevent the NetBoot BootP server from responding to+
+requests for IP addresses, use the dscl command-line tool to open the local folder on the NetBoot server and add a key named bootp_enabled with no value to the /config/dhcp/ folder."+
so I first tried to read the local directory:
xadmin$ *sudo dscl . -read /config/dhcp/*
AppleMetaNodeLocation: /Local/Default
RecordName: dhcp
RecordType: dsRecTypeNative:config
and then to create the key:
xadmin$ *sudo dscl . -create /config/dhcp/ bootp_enabled*
* Uncaught Exception: <NSInvalidArgumentException> ([DSoDataNode initWithDir:value:] value is not a valid NSString nor NSData)
but did not succeed. Somthing must be wrong with the syntax. Tried several (Config, dhcp noslash, bootp_enabled:) but nothing helped.
You dscl experts - please enlighten me!
Btw. Apple why not include to correkt syntax in a manual?

worked for me, too
Thanks a lot,
Willi

Listed Material errors with "Material is not listed therefore not allowed"

Hi Gurus,
When trying to key an order for a customer with a listed material it is being reported as not listed. Other materials listed against the customer are working and have been keyed in via VB01 with a valid date range.
I have been debugging PRICE_LIST_EXCLUSION function which is called during listing validation without success.
Any ideas?
Thanks,
Will
Edited by: Will Wong 49 on Jul 29, 2011 5:13 PM

Discovered the issue. A user had keyed in listing incorrectly for the sold to instead of exclusively at the payer level. Deleted these sold to listing entries and resolved the issue.

Problem with kfmclient (command not found)

Today, I tried to run the CUPS web configuration tool, but it failed to run (ie. open the page in Firefox). I executed the command in the terminal to check for errors, and it said "kfmclient: command not found".
When I checked pacman for kfmclient, no such package exists. How do I install kfmclient?

Just an additional information,
for 'command not found' problems, pkgtools in community should be helpful. It also have a bash hook to find the package automatically on that error.
Thanks, regards,

Procedure compilation failed with SQL command not properly ended error

Hi All,
Kindly help me to fix this.
I am compiling a procedure and getting an error. Procedure and error details are as follows:
Procedure:
CREATE or REPLACE PROCEDURE jiostore_new.auditReportCount (u_name IN VARCHAR2,stdate IN DATE,eddate IN DATE)
IS
BEGIN
DECLARE Total Number;
BEGIN
SELECT COUNT(am.id) into Total FROM auditMaster_ AS am INNER JOIN jioworld.deviceos_ dvos ON dvos.id=am.deviceOs WHERE am.updatedBy=u_name or am.updatedBy=ALL AND DATE(am.updatedDate)>=stdate OR DATE(am.updatedDate)='0000-00-00' AND DATE(am.updatedDate)<=eddate or DATE(am.updatedDate)='0000-00-00';
dbms_output.put_line('Total Count:' || Total);
END;
END;
Error:
Error(6,1): PL/SQL: SQL Statement ignored
Error(6,50): PL/SQL: ORA-00933: SQL command not properly ended
Regards,
Vishal G

2922723 wrote:
Hi All,
Kindly help me to fix this.
I am compiling a procedure and getting an error. Procedure and error details are as follows:
Procedure:
CREATE or REPLACE PROCEDURE jiostore_new.auditReportCount (u_name IN VARCHAR2,stdate IN DATE,eddate IN DATE)
IS
BEGIN
DECLARE Total Number;
BEGIN
SELECT COUNT(am.id) into Total FROM auditMaster_ AS am INNER JOIN jioworld.deviceos_ dvos ON dvos.id=am.deviceOs WHERE am.updatedBy=u_name or am.updatedBy=ALL AND DATE(am.updatedDate)>=stdate OR DATE(am.updatedDate)='0000-00-00' AND DATE(am.updatedDate)<=eddate or DATE(am.updatedDate)='0000-00-00';
dbms_output.put_line('Total Count:' || Total);
END;
END;
Error:
Error(6,1): PL/SQL: SQL Statement ignored
Error(6,50): PL/SQL: ORA-00933: SQL command not properly ended
Regards,
Vishal G
The first thing, is that for your own sanity you should learn to format your code for readability. And for the sanity of those from whom you seek help, you should learn to preserve that formatting when you post to a forum:
CREATE OR REPLACE PROCEDURE jiostore_new.auditReportCount(
    u_name IN VARCHAR2,
    stdate IN DATE,
    eddate IN DATE)
IS
BEGIN
DECLARE
    Total NUMBER;
BEGIN
    SELECT COUNT(am.id)
    INTO Total
    FROM auditMaster_ AS am
    INNER JOIN jioworld.deviceos_ dvos
    ON dvos.id              =am.deviceOs
    WHERE am.updatedBy      =u_name
    OR am.updatedBy          =ALL
    AND DATE(am.updatedDate)>=stdate
    OR DATE(am.updatedDate) ='0000-00-00'
    AND DATE(am.updatedDate)<=eddate
    OR DATE(am.updatedDate) ='0000-00-00';
    dbms_output.put_line('Total Count:' || Total);
END;
END;
What is the data type of am.updateDate? It appears to be a varchar being passed to a function named DATE to convert it to a DATEfor comparison to your input parameters, But you also compare it to strings.
Where are the variables 'u_name' and 'ALL'? (and what kind of a name is that for a variable -- 'ALL'?)

Updating textfield with DEL key not taking into account

I have a decimal field which accepts only numerals...
after modifying the value in the field and pressing an OK button...the new value is reflected in a table...
but if i modify the same field value using the "delete" key and press OK...the new value is not taken into account....
but the same works with "backspace" key...
So do i need to set anything to respond to del key...
Thanks

Also i am not able to put the code here as it is a huge applicationI did not ask for your entire application. I asked for
demo code means code that we can compile and execute, but it only contains the code relevant to your problem
Here is an example:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DemoCode extends JFrame
     JTextField textField;
     public DemoCode()
          textField = new JTextField();
          getContentPane().add(textField, BorderLayout.NORTH);
          JButton button = new JButton("Update Database");
          button.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    System.out.println(textField.getText());
                    textField.setText("");
                    textField.requestFocusInWindow();
          getContentPane().add(button, BorderLayout.SOUTH);
     public static void main(String[] args)
          JFrame frame = new DemoCode();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.pack();
          frame.setLocationRelativeTo( null );
          frame.setVisible(true);
}If you can't create a simple demo then you don't understand your problem and if you don't understand your problem then how are we supposed to?
custom field So you probably have a coding problem and we have no idea what your code looks like
that accepts only decimal values and why are you not using JFormattedTextField?
And this problem is not seen if i modify the custom field using any other key say like "Backspace".Again this problem doesn't make sense since the character should be removed from the text field before the OK button is pressed.

Diskinfo -a command not listing the newly added disk

Hi,
I replaced an internal disk on my T4-1 box. After the replacement, I am able to find the disk listed in:
echo | format
cfgadm -al
df -hk (have mounted a file system on this new disk)
But the issue is that I am unable to find the disk getting listed in the diskinfo -a output.
Please suggest what needs to be done.
# cfgadm -al
c9::w5000cca012c4ec8d,0 disk-path connected configured unknown
c10 scsi-sas connected configured unknown
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
c11 scsi-sas connected configured unknown
c11::w5000cca012d20555,0 disk-path connected configured unknown
bash-3.2# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t5000CCA012B4D098d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012b4d098
1. c0t5000CCA012C4EC8Cd0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c4ec8c
2. c0t5000CCA012C9AA14d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c9aa14
3. c0t5000CCA012D20554d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012d20554
4. c0t60080E50002499E60000039B504D627Fd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039b504d627f
5. c0t60080E50002499E60000039E504D62ABd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039e504d62ab
6. c1t50080E52499E6000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@1/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e52499e6000,1f
7. c3t50080E5249EC8000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@2/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e5249ec8000,1f
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2#
bash-3.2# diskinfo -a
Enclosure path: 1203BD02DA-physical-hba-1
Chassis Serial Number: 1203BD02DA-physical-hba-1
Chassis Model: ORCL,Netra-SPARC-T4-1
Label Disk name Vendor Product Vers
/SYS/HDD0 c0t5000CCA012C9AA14d0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD1 c0t5000CCA012C4EC8Cd0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD3 c0t5000CCA012D20554d0 HITACHI H106030SDSUN300G A2B0
bash-3.2#
Seems like the issue will get resolved if I can remove the old entry of the disk in the cfgadm -al output.
But in our setup we can not use the luxadm command to make the disk unused.
So please suggest any alternative way to remove the extra entry (old disk's):
# cfgadm -la | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
After reboot:
Output after reboot:
# cfgadm -al | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
Edited by: 951222 on Oct 23, 2012 4:57 AM

Please note that the diskinfo command was added to Solaris 10U10 to provide the disk location, but due to bug 7093855 it only displays disks from the first controller. This will be corrected in S10U11.
From Document 1365089.1 (How to locate a failed internal disk drive on a T3/T4 series system)

Emails imported from Entourage2004 with attachments are not listed as having attachments in Mail.app

The attachment is still there. But the attachment column is blank when viewing the list of e-mails. Is there anything I can do to get Mail to display the attachment icon in the listing?
I originally imported the Entourage 2004 emails by grabbing each Entourage folder, dragging it to a folder on my old PowerBook G4, dragging that folder to my external drive, and having Mail import the mailboxes from the external drive to Mail 6.3 ( OSX 10.8.3) on my new Mac Mini. any ideas? Thank you.

Hello Ramki
DECISION_NOTE is a new element created in the standard decision task as of new releases (Note 1643764)
Once the user fills in the comments, they are saved as SOFM Objectsin DECISION_NOTE (this too is multiline element). All we have to do is bind it back to the workflow container in _ATTACH_OBJECTS.
Hi Ronen
Thanks for the suggestion.....I was thinking on the same lines too....if at all we have to change the approach, I need to keep it least disruptive .
Hi Rick
Will test the FM SO_NEW_DOCUMENT_ATT_SEND_API1 ...let me check if I can redefine SENDTASKDESCRIPTION in a delegated subtype of SELFITEM and use this API ....(if at all I can)....
For the wait step part.... the attachment is added to the mail step via the binding from the workflow...._ATTACH_OBJECTS from Workflow to _ATTACH_OBJECTS of the email task...not sure where you want me to set a wait step. Request you to please elaborate a bit more.
Thank you all for your kind inputs!
Will be back with my today's trials...
Regards,
Modak

Header Line Per ALV group of items in GRID not LIST.

Hello Experts,
My question may seem very basic but i am stuck with it.
I am using ALV Grid function (REUSE_ALV_GRID_DISPLAY) to display my ALV.
Example Case :
I have 10 line items .
1)     2 line items are sports.
2)     2 line items are books.
3)     2 line items are Mobiles.
My ALV displays like this :
No.    Object     Object Type
1)       Ball          sports
2)       Bat          sports
3)     Maths        Books
4)     History      Books
5)     Nokia         Mobiles
6)     Samsung   Mobiles
And i want it like this :
No.     Object
Sports <---- I want this to act as header per line item .
1)        Ball
2)        Bat
Books
3)       Maths
4)       History
Mobiles
5)       Nokia
6)       Samsung.
I.e i need a row stating Object Type IN ALV Grid similar to how we make use of AT NEW EVENT in LIST REPORT.
Thanks in Advance,
Sudeep.
Edited by: Sudeep Yerunkar on Jul 21, 2010 11:40 AM

Hi,
If GRID is a 'MUST' requirement, then you can try preparing your internal table in the manner you want the output.
Something like this:
- Sort the output internal table.
- Loop on the output int table.
- Use AT NEW object type
- Append Object Type into another internal table
- Then read rest of the records with same object type into another internal table and appending the same.
Not sure about the efficieny but you can try.
BR,
Vishal.

ActiveX Commands not listed

I'm trying to add a date picker calendar to an excel 2010 worksheet. When I try to do
so with VBA I can't find the Command for a "Month View"in the list of available commands. When I have tried using an ActiveX Control, there is no "Microsoft Date and Time Picker Control" in the list of available commands.
Is there another source for these commands?

Hi,
As far as I know, the "Microsoft Date and time picker control" is part of the Windows Common controls. The file is MSCOMCT2.OCX, located in C:\Windows\System32 on 32-bit or C:\Windows\Syswow64 on 64-bit. If you don't have this
file, you can download it from the following location:
http://activex.microsoft.com/controls/vb6/MSCOMCT2.cab
Once you download the file, you'll need to extract the files and then register the OCX file. You will likely need to open the command prompt as administrator in order to get the file to register successfully. Here are the steps in case you need
them.
* Go to Start\All Programs\Accessories.
* Right-click Command Prompt and then click on Run As Administrator.
* Change directory to the folder where you extracted the files. For example, type the following and then press Enter: cd c:\windows\system32
* Type the following and then press Enter: regsvr32 mscomct2.ocx
* You should get a message saying this succeeded.
I hope this helps!
Source Link:
http://social.technet.microsoft.com/Forums/office/en-US/defdd35a-f285-4b84-bf4c-d62011823b37/access-2010-datepicker-control-missing
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Font with proportional oldstyle not listed in OpenType

Hi everybody. So, I've been working in ID CS6 with a font that definitely has a set of Proportional Oldstyle figures -- I checked, and they're in the glyphs palette -- but it seems like they wasn't tagged as that when the font was created because the OpenType menu says it doesn't have one. Is there any way for me to override this and assign that set of figures to OpenType, or is it just not a font I can use? (I mean, without going through and manually changing every figure in the book.)
Thanks so much!

See, they aren't listed as alternates, they're just separate glyphs. Originally I thought that was what the problem was -- they don't appear to be tagged as anything. So they exist for the typeface, but they don't show up in any menus, and if I were threading the book, it's looking like I would have to go in and manually change every figure, including page numbers. I can buy an .otf version, but I was hoping to avoid that. So it might just be that I'm trying to use a font for a purpose I shouldn't try to use it for...

Group Added With dscl Command Not Listed In Account Prefs

Similar Messages

Maybe you are looking for