Group and Filter for one Repeating Framte

When I use a filter ("first" / number of records 1) on group at one repeating frame then all other repeating frame of this group use this filter.
How can I create filter only for one specific repeating frame ?
Thanks.

If ur clear exactly what ur trying to do i can help i think
Sri
When I use a filter ("first" / number of records 1) on group at one repeating frame then all other repeating frame of this group use this filter.
How can I create filter only for one specific repeating frame ?
Thanks.

Similar Messages

  • Filter for one hierarchy and expanding for another one?

    Hi to all,
    We've a dimension A with 2 different hierarchies (call them as usual PARENTH1 and PARENTH2).
    What I've been asked by the users is a little interface, where they can:
    - filter for one parent of the first hierarchy
    - expand for the parents of the second hierarchy, who share the same base members.
    Initially I had hoped that imposing the value desired of the parenth1 in the PageKeyRange, and expanding with a filter like HIR="H2" and HLEVEL="2" would work, but it doesn't work (I get ALL the parents at level 2 of the second hierarchy, not the parents who shares the same basemembers).
    Is it possible to model this with an evDRE? If so how? Unfortunately, I cannot make a single hierarchy (this parents aren't in a 1-N relationship between them, unfortunately).
    Thank you
    Daniele

    Hi James,
    could you explain more in detail your solution? Because I tried it, and it didn't work as I expected...
    Let me explain with an example
    Hierarchy1:
    Dir_01 has got 4 basemembers (test1, test2, test3, test4), while Dir_02 has got other 2 basemembers (test5, test6)
    Hierarchy 2
    Es1 has got 3 basemembers (test1, test2, test3), Es2 has got 1 basemember(test4), Es3 has got 2 basemembers (test5, test6)
    What I would like to do is to
    - filter an evDRE with Dir_01
    - "expand" (I believe i've wrongfully explained myself in this point) with the other Hierarchy, which means: I want in the report only the nodes in the hierarchy 2 that share the same basemembers
    In this way, I would have as available keys in my evDRE report:
    Es1
    Es2
    With your solution, I even get Es3, which doesn't have any common basemember...
    Kind regards
    Daniele

  • VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)

    Dear Colleagues.
    Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
    All help greatly appreciated,
    PAPJ1
    Error Log
                 0010056707 000000 Document 0010056707 saved (no accounting document generated)
                 0010056707 000000 Enter a name and city for one-time account postings
                Technical data
                    Tech. data details
                     Client
                     Group Number
                     Sales Document Number                  0010056707
                     Item Number of the SD Document         000000
                     Schedule Line Number                   0266
                     Counter in Control Tables              00
                     Message Identification                 F5
                     System Message Number                  266
                     Output Type                            E
                     Message Variable 01
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type

    Hi.
    The system logic is the following:
    In the master record of your one-time account, there is a field called
    'Reference account group'. The field status settings of the account
    group entered here are relevant for the one time vendor screen.
    Please note that even if the fields are changed from mandatory to
    optional if the NAME and CITY of the One Time Vendor is not filled, the
    system will still prompt the Error Message F5266.
    If you do not enter the name and city you will receive error F5266.
    The system logic here is to make sure that the name and the city being
    keyed-in properly for the Executive Information System reportings.
    Please note that it is hard-coded in the system.
    Check the following notes
    604312
    587806
    548834
    513748
    512360
    Also if you are using any bapi to post the document, you can  resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • CR - giving total transaction count for few groups and 0 for few groups.

    For the column "No of First Call Resolution" I have to count no of interactions based on the Interaction Result, the formula is
    COUNT(Interaction_ID) WHERE INTERACTION_RESULT = 'FCR'
    For which, I wrote the below formula
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then Count ({14CICustomerInteractions_query.Interaction_ID})
    I have 33,232 interactions on the particular day I selected. When I try to group up and do the calculations it is giving total transaction count for few groups and 0 for few groups.
    Need Solution

    Hi,
    What field is the report grouped on?
    If you wish to find the no of interactions based on some condition and display it for every group, then here's what you need to do:
    1) Create this formula and place this on the details section:
    whileprintingrecords;
    numbervar c;
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then
    c := c + 1;
    2) Create another formula and place this one on the Group Footer:
    whileprintingrecords;
    numbervar c;
    3) Create this formula to reset the variable and place this on the Group Header:
    whileprintingrecords;
    numbervar c := 0;
    Let me know how this goes!
    -Abhilash

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

    When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
    - When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed.  The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
    Requirements:
    There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
    ->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
      server to SAP R/3. The selection screen parameters would be:
      Logical Filename:
      Sales Organization:
      Distribution Channel:
      Division:
    ->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
      to SAP R/3. When this transaction is executed, it should not have the 'Logical
      Filename' parameter anymore on the selection-screen. Instead it should only have
      Local File name on the presentation server:
      Sales Organization:
      Distribution Channel:
      Division:
        The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
    is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
    Logical Filename:
    Sales Organization:
    Distribution Channel:
    Division:
    So how should I make these parameters invisible depending on the transaction codes execution.
    I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
    I have an idea of using SY-TCODE.
    EX:
    AT SELECTION-SCREEN OUTPUT.
    IF SY-TCODE = 'ZJPVCS303'.
    LOOP AT SCREEN.
    IF SCREEN-GROUPID = 'GRP'.
       SCREEN-INPUT   = 0.
       SCREEN-INVISIBLE = 1.
       MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ELSEIF SY-TCODE = 'ZJPVCS303_US'.
    LOOP AT SCREEN.
    IF .....
    ENDLOOP.
    ENDIF.
    ENDIF.
    But I am not able to get the output which I require. Please help me out.

    Hello Rani
    Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
    PARAMETERS:
      p_as_fil          TYPE filename   MODIF ID unx,  " e.g. Unix server
      p_pc_fil          TYPE filename   MODIF ID wnd.  " e.g. Windows PC
    AT SELECTION-SCREEN OUTPUT.
      CASE syst-tcode.
    *   transaction(s) for upload from server (AS)
        WHEN 'ZJPVCS303.
          LOOP AT screen.
            IF ( screen-group1 = 'UNX' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
    *   transaction(s) for upload from local PC (PC)
        WHEN 'ZJPVCS303_US.
          LOOP AT screen.
            IF ( screen-group1 = 'WND' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
       WHEN others.
       ENDCASE.
    Regards
      Uwe

  • Enter a name and city for one-time account posting is the message i get

    Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

    Hi,
    I didnt understand what u mean by "when i am trying to post a onetime vendor".
    Pl. specify whether you are:
    -Creating a OTV
    -Creating a PO for a OTV
    or
    doing any other transaction
    Regards,
    Prithviraj

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • May I install Aperture on my iMac and MacBookPro for one price?

    May I install Aperture on my iMac and MacBookPro for one price?

    Yes, Like Neil says.
    However note that Aperture will not synch a Library between the two Macs. Huge flaw.
    -Allen

  • Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

    Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html
    -what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • HT201272 I'm trying to buy some gold and money for one of the race games but they said contact i tune

    Imtrying to buy some gold and money for one of the race games but they said I should contact I tune

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

  • Powershell script for security groups and users for multiple share folders

    Hi scripting team,
    I need your help with powershell script for the below queries 
    1. List out the security groups for more than one server share path and output it to a file ( csv ) 
    For eg.
    If the are are two share paths 
    \\servername\foldermain\folder1
    \\servername\foldermain\folder2
    So I needs the list of security groups for each share path
    And the output needs to be under each any every path.
    2. Grab the users belongs to main security groups and it nested groups for more than one security group and listed the users under each and every group. No need to display nested groups. Just users belongs to main group and users under nested.
    Your teams help is much appreciated 
    Thank you.
    Thilochana kumararatne

    Hi Braham,
    Thanks for your quick reply.
    Are we able to do this on two stage method
    1. grab the security groups from the share paths
    if can grab the share path from a separate txt file than copying it to the <your path> location
    so i can modify the txt file
    once run the script
    if can the output like below to a CSV file
    \\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
    group 2user1user2user3looking forward your help on thisThank you.Thilo

  • OBIEE Answer : SQL Filter for one column of the Dashboard sample : 201301

    I need to filter the report on the basis of one of the filter on the column which is created by custom calculation :
    YEAR ("Order Header Attributes"."Status Date" ) * 100 + WEEK("Order Header Attributes"."Status Date" )
    and this in the Number format.
    I need the filter as : 2013 + Week(CurentWeek) -1 = 201302
    Please help me create a custom SQL filter for the same.

    Anitha ,
    I am getting the error while doing it with Prompt :
    I went to the Dashboard on top Left next to results there is a Prompt there i clicked a new prompt i gave a name , description selsected my column in Filter on Column
    Operator : = is equal to / is in
    How should the user choose a value or values?
    * Select it from a drop-down list
    Browse through choices and/or type in directly
    * Single Value Only
    What values should be shown to the user?
    None
    All Values
    Limited Values
    * SQL Results (year("Status Date")*100) + WEEK_OF_YEAR("Status Date")-1)
    (The values returned by this SQL statement)
    Other options
    Choices per page
    (leave blank for automatic setting)
    Allow user to constrain choices
    Allow user to skip prompt
    I am doing correctly please help me in case i am not doing it correctly
    Regards ,
    Nidhi

  • Is there a way to create an automated job to add andupdate groups and users for Connect?

    Is it possible and does anyone have experience with being able to create an automated load of new groups and users in Adobe Connect. We have an On-premise deploymentwill be setting up  the application to be open outside our company to train channel partners. We have a separate database of channel partner contacts, email addresses, passwords, and training groups that they should be in based on their partner company or product knowledge. We would like to be able to create a front end database that would create a group based on the partner company or based on product knowledge. Then we would like to add users to these groups. Any knowledge of whether this is possible and if anyone has done it?

    There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.

  • Retrieving User groups and email for all users in a group

    Hi Everyone,
    I need to create an ADF application to retrieve all the groups in OID, the user would select a group and it should list down all the email addresses in that group.
    Can you suggest what is the best way to achieve this. My main concern is how to retrieve groups and email addresses from OID. I was unable to find APIs for it.
    Your suggestions are greately appreciated.
    Thanks,
    Husain

    In a multi-user environment, a user install a dreamweaver extension,but just the user who install the extension can use it.
    Is there a way that administrator install the extension and make this extension available for other users in multi-user environment(e.g. the Windows 7)
    Dreamweaver had this capability many releases ago, but it has been dropped, so it's no longer available.
    Regards,
    Randy Edmunds
    Dreamweaver Development
    Adobe Systems, Inc.

Maybe you are looking for