Group and group counter in sap

Hi all,
when i am creating rate routing while how can i change group number, external entry is not possible for group.,

Dear Joy,
check the number range interval in T.Code OP62 for the number range interval whether the check box is included for external
number allowed(which means within the from - To range a number can be entered externally for creating routing).
If not means you can onlu use interval number range,if required a different number range for external series can be configured.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

Group and Group counter in Routing

Hi all,
what is group and group counter in routing , how these are used in routing , please explain.
Regards,
Joseph.

Dear Joseph,
1.Each routing is stored against a group and group counter no.
2.When we create routing without respect to any material and only by giving the plant,the set of operations gets saved under one
group counter and group no.
4.Many materials can be assigned to this same group and group counter no,so that the routing is valid for all the materials included.
5.When you create a routing for material specific,the set of operation gets saved in a group no and group counter no as 01,when
you create another routing with another set of operations for the same material,plant and task list combination now the group no
remains same and the group counter gets saved under 02.
6.This data can be further helpful in assigning the routing data in the production version,.
Check and revert
Regards
S Mangalraj

How do I know which group and group counter used to create current estimate

Is there a way to know, if for a given set of materials, what groups and groups counters have been used to create the current cost estimate. Or for a given comboniation of material, group and group counter has been used to create a current cost estimate. I can look each up through displaying the cost estimate but I am looking for a quick way since the number of materials are in 100s.
I was wondering if there is a table I could look up to get the info.
Any help would be much appreciated.
Regards

The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM

Is there User Group and Role Reporting in SAP Enterprise Portal?

I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

Tasl list group and group counter

hi,
i have one requirement . I have give internal number range to the task list. so my need to to create task list with one group and several group counter. But what is happening is when i run LSMW for that. seperate group numbers has been generated for each task list. is there any way to get the same group number with different counters using LSMW>

hi
since you have given internal number range for task list system will try to create task list with different group numbers .if you want the same group number with different group counter then i think you have to use the task list with external number and use the number created before
regards
thyagarajan

Anyconnect tunnel-group and group-policy from LDAP

Recently we've changed from LOCAL to LDAP authentication and added additional group-policies for different users to increase security.
To prevent users from selecting an incorrect group-policy, the LDAP server provides a IETF-Radius-Class value which matches the different group-policy names.
It is my understanding that the authentication method is provided by the tunnel-group.
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group LDAP_AD
This all works, but for _one_ of the group policies i'd like to enable (external) two factor authentication. Two enable two factor auth a 'secondary-authentication-server-group' needs to be set in the tunnel-group.
Creating a tunnel-group which maches the name of the group-policy doesn't seem to have any effect. When listing the connected users via "show vpn-sessiondb anyconnect", it always states the correct Group Policy but also always DefaultWEBVPNGroup.
When enabling the listing of tunnel-groups for webvpn, thus allowing users to select their own tunnel-group, the two factor auth does work.
To summarize, is it possible to let LDAP decide which tunnel-group is used or is there another way to have different group policies without users being able to choose ?

Fabian,
Your connection lands on a tunnel group and picks a group policy.
A typical way to overcome the problem you're indicating is by using group-url.
a URL is bound to a specific tunnel-group and allows you to land directly on the one you desire.
vide:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
M.

How to create Groups and Group Leaders in Clusters.

Hi,
As we know in unicast there is one to one communication and there are groups to control the Thread
Management, How the Groups and the Group Leaders are created.
Regards,
Vardhan.

Unicast clustering uses TCP/IP sockets to pass cluster messages between members. To avoid requiring each cluster member
to have connectivity to every other cluster member, WebLogic Server uses a group leader strategy whereby the oldest member
of the group (in other words, the server that was started first) is designated the group leader. All members of the cluster
connect to the group leader so that the group leader acts as the relay point for cluster messages between members.
If the group leader goes down, the next oldest member becomes the new group leader.
As you can imagine, the group leader strategy works well for small groups but becomes less efficient as the number of members
of the group grows large. As such, WebLogic Server uses a multiple group leader strategy where it limits the number of members
in a group to 10. If the cluster is larger than 10 members, WebLogic Server splits into two or more groups, each with their own
group leader. The group leaders themselves are all interconnected to minimize the number of hops that a cluster message must
traverse to reach all cluster members.

Group and group counter used to create cost estimate

I am creating a custom report and would like to know what table do I have to use if for a given material the program has to pick Group, Group counter and the task list type that were used in creating the cost estimate for that material. Any help in this regards is much appreciated.
Regards,

The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM

Bea Portal Group and Group selection / um:getPorperty

Hi,
I would like to know if it is possible to set the default group
in which <um:getProperty> looks into when the user does not have
the requested property set into his profile.
I noticed that by default it looks into the current group portal.
However I would like to make it look into a specific sub group
of the group portal.
In the same way there are checks to dertermine if a user belongs to
several portal groups, I would like to extend these checks and include
sub groups in the tests and selection.
I saw that the webflow uses GroupFormProcessor and GroupProcessor but
couldn't find the source code to see what needs to be initialized for
<um:getProperty> to work correclty.
I saw the successor attribute in <um:getProfile>, but I would like to
know if there's a way to avoid specifying it each time... by setting a
value in the session for instance ?
Thanks for your help,
Best Regards,
Thierry

Hello Thierry,
You probably want to set the explicit successor in the session. A
successor is a group from which a user inherits properties. An explicit
successor is one that is specified in the getProperty() call underlying the
<um:getProperty> tag. Just for your information, this is as opposed to an
implicit successor, which is persisted for the user and is associated with a
property set. You can use the methods of ProfileWrapper to persist an
implicit successor for a user for a specific property set.
The portal framework sets the ProfileWrapper in the session using the
com.bea.p13n.usermgmt.SessionHelper.putProfileInSession() method. It sets
the explict successor for this profile to be equal to the group that was
selected by the user to apply for this portal session when they logged on
(if they are only a member of 1 group, then they were not prompted for which
group...the group was simpley set as the explicit successor). The call to
SessionHelper.putProfileInSession() is done in the PostLoginProcessor in the
portal security webflow (see the webflow in your EBCC).
You can override this by using SessionHelper.putProfileInSession()
yourself or by putting <um:getProfile> into your portal.jsp page.
<um:getProfile> does the same thing (uses
SessionHelper.putProfileInSession() to put the ProfileWrapper into the
session).
If I were you, I'd put <um:getProfile> with session scope at the top of
portal.jsp and use the group that you are interested in as the explicit
successor.
See the <um:getProfile> docs at
http://edocs.bea.com/wlp/docs70/jsp/p13njsp.htm#1001358
"Thierry Bensoussan" <[email protected]> wrote in message
news:[email protected]...
Hi,
I would like to know if it is possible to set the default group
in which <um:getProperty> looks into when the user does not have
the requested property set into his profile.
I noticed that by default it looks into the current group portal.
However I would like to make it look into a specific sub group
of the group portal.
In the same way there are checks to dertermine if a user belongs to
several portal groups, I would like to extend these checks and include
sub groups in the tests and selection.
I saw that the webflow uses GroupFormProcessor and GroupProcessor but
couldn't find the source code to see what needs to be initialized for
<um:getProperty> to work correclty.
I saw the successor attribute in <um:getProfile>, but I would like to
know if there's a way to avoid specifying it each time... by setting a
value in the session for instance ?
Thanks for your help,
Best Regards,
Thierry

Group and Individual Assets Legacy data load

Hi, I work for a oil and gas company and I am having issues for the initial load for the group and individual assets into SAP .
Any help in regards to this would be helpful.
Below are the values that I would like to load into SAP for group ( grp 1 ) and individual assets ( Ind 1 and Ind 2 ) into SAP. We would like the depreciation to be carried on the group asset level and allocated on the NBV of individual assets ( which I think seems not possible but the standard allocates the depreciation only on acquisition value ) .
Asset              APC Value         Acc Depreciation      NBV
grp 1                20,000.00           10,000.00                 10,000.00
Ind 1               10,000.00            6,000.00                    4,000.00
Ind 2               10,000.00            4,000.00                    6,000.00
The problem is for intital load as well once the Ind 1 and Ind 2 are assigned to group asset grp 1 , it doesnt consider the acc depreciation at all , and the system allocations the accumulated depreciation based on apc values rather then NBV as of the load date.
Also, if I plan to load only the NBV of the group and individual assets only, the clients wants the APC values as well for reporting , so not where I can get those from if I only load the NBV.
Please let me know other approaches for initial load of group and individual assets that you guys might have worked on .
Thanks
bharani

hi,
Hope your requirement is to see the takeover values as on legacy asset takeover date, for those group assets mistakenly created with AS21...instead of AS81.
Am i right...........
Then you can do this by doing below.
1) Go to OAAQ, for your CC, the last closed FY should be same as the FY, which is actually used during legacy asset upload.
2) now go to AS82, for your wrongly created group assets and in takeover values tab, enter the values manually.
Note: Assets created by AS01/AS21 can changed with AS92/AS82, then you will have takeover values tab in addition to normal AS02/AS22 transactions.
once updation is finished, then again revert back the changes in OAAQ.
This will solve your issue.
Thanks,
Srinu

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

Group and count

Hello Friends,
I have a query where I select organization, item_num, and transaction_date.
I need to group and count the result by transaction_date, so I will have 3 groups:
First - will count records where transaction_date falls between the 1st and 10th of the month.
Second - will count records where transaction_date falls between the 11th and 20th of the month.
Third - will count records where transaction_date falls between the 21st and 31st of the month.
The result of this count will be used in the Oracle Report.
Please, give me your advise on how I can achive this.
Thank you.

select organization,
       item_num,
       count(case
               when transaction_date between trunc(transaction_date, 'mm') and trunc(transaction_date, 'mm') + 9 then 1
             end) "1-10",
       count(case
               when transaction_date between trunc(transaction_date, 'mm') + 10 and trunc(transaction_date, 'mm') + 19 then 1
             end) "11-20",
       count(case
               when transaction_date between trunc(transaction_date, 'mm') + 20 and trunc(last_day(sysdate)) then 1
             end) "21-end"
from mytable
group by organization, item_num
Ramin Hashimzade

Wsus query needed - get WSUS-Computers, belonging WSUS-Group and Not Installed Count

Hi,
i try to find a way by using basic WSUS powershell cmds in combination with piping in Server 2012 R2 to get all registered computers in WSUS plus belonging WSUS-Group and Update "Not Installed Count" as output.
Is that possible?
I tried multiple times and enden up in using posh - is there no way based on standard powershell commandlets.
Thank you
Peter

Hi Michael,
it seems that you are right :(. I tried out a few things with powershell (source
http://blogs.technet.com/b/heyscriptingguy/archive/2012/01/19/use-powershell-to-find-missing-updates-on-wsus-client-computers.aspx) - big problem is that i actually cant get belonging WSUS Group to Server object. I only are able to get all WSUS Groups
but cant find the right sytax to get only belonging ones.
Any ideas?
Thanks
Peter
#Load assemblies
[void][system.reflection.assembly]::LoadWithPartialName('Microsoft.UpdateServices.Administration')
#Create Scope objects
$computerscope = New-Object Microsoft.UpdateServices.Administration.ComputerTargetScope
$updatescope = New-Object Microsoft.UpdateServices.Administration.UpdateScope
#Gather only servers
$ServersId = @($wsus.GetComputerTargets($computerscope) | Where {
$_.OSDescription -like "*Server*"
} | Select -expand Id)
#Get Update Summary
$wsus.GetSummariesPerComputerTarget($updatescope,$computerscope) | Where {
#Filter out non servers
$ServersId -Contains $_.ComputerTargetID
} | ForEach {
New-Object PSObject -Property @{
ComputerTarget = ($wsus.GetComputerTarget([guid]$_.ComputerTargetId)).FullDomainName
ComputerTargetGroupIDs = ($wsus.GetComputerTarget([guid]$_.ComputerTargetId)).ComputerTargetGroupIds
ComputerTargetGroupNames = ($wsus.GetComputerTargetGroups())
NeededCount = ($_.DownloadedCount + $_.NotInstalledCount)
#DownloadedCount = $_.DownloadedCount
NotInstalledCount = $_.NotInstalledCount
#InstalledCount = $_.InstalledCount

SAP IDM : Master privilege and Grouping

Hi Guys,
I am using SAP IDM 7.1 SP5 Patch2. I am tyrying to user master privilege and grouping but it does not seem to work or i did not get the concepts.
Anyone who is familiar with these two concepts.
Example : Master privilege:
i define one in Active Directory repository and i suppose that when i provision, all other privileges will wait until this one is provisioned. This is not what happens.
As soon as i assign a role with five privileges to a user, the five privileges start executing.
So create user executes five times.
Any help is appreciated

Hi Anup,
Please have a look at the schema document, if you do not have it i can send you a copy.
Here is the paragraphe for the MX_PRIVILEGE ENTRY TYPE
In the schema document, i cannot see MXMEMEBER_MX_PRIVILEGE as allowed for the MX_PRIVILEGE ENTRY TYPE:
Entry type MX_PRIVILEGE
Description
This entry type is to hold privileges.
Attributes
The entry type contains the following attributes:
Attribute Mandatory (Yes/No) Available as of version
DESCRIPTION No 7.1 SP1
DISPLAYNAME Yes 7.1 SP1
MSKEYVALUE Yes 7.1 SP1
MX_ACCESS_CONTROL No 7.1 SP1
MX_ADD_MEMBER_TASK No 7.1 SP1
MX_ADDMEM_DISABLE_POLICY No 7.1 SP2
MX_APPLICATION_ID No 7.1 SP4
MX_APPROVAL_TASK No 7.1 SP1
MX_APPROVERS No 7.1 SP1
MX_AUDIT_FLAGS No 7.1 SP1
MX_DEL_MEMBER_TASK No 7.1 SP1
MX_DELMEM_DISABLE_POLICY No 7.1 SP2
MX_DEPROVISIONTASK No 7.1 SP1
MX_EDIT_ATTRIBUTES No 7.1 SP1
MX_EDIT_MEMBERSHIP No 7.1 SP1
MX_ENTRYTYPE Yes 7.1 SP1
MX_GROUPING_DISABLED No 7.1 SP3 Patch 1
MX_INACTIVE No 7.1 SP1
MX_INHERIT No 7.1 SP1
MX_MANAGER No 7.1 SP1
MX_MODIFYTASK No 7.1 SP1
MX_MODIFYTASK_ATTR No 7.1 SP1
MX_OWNER No 7.1 SP1
MX_PRIVILEGE_TYPE No 7.1 SP1
MX_PROVISIONTASK No 7.1 SP1
MX_RBAC_DIRECT_PRIVILEGE No 7.1 SP1
MX_RBAC_REVERSE_PRIVILEGE No 7.1 SP1
MX_REPOSITORYNAME No 7.1 SP1
MX_REQ_PRIV No 7.1 SP2
MX_REQ_PRIV_INTERVAL No 7.1 SP2
MX_REQ_PRIV_NOMASTER_TASK No 7.1 SP2
MX_REQ_PRIV_PCYADD_MISSING No 7.1 SP2
MX_REQ_PRIV_PCYADD_PENDING No 7.1 SP2
MX_REQ_PRIV_PCYADD_REMOVING No 7.1 SP2
MX_REQ_PRIV_TIMEOUT No 7.1 SP2
MX_SEMAPHORE No 7.1 SP1
MX_TARGET_ALL No 7.1 SP1
MX_TARGET_DYNAMIC_GROUP No 7.1 SP1
MX_TARGET_SELF No 7.1 SP1
MX_VALID_MEMBERS No 7.1 SP1
MX_VIEW_ATTRIBUTES No 7.1 SP1
MXAC_ENTRY No 7.1 SP1
MXAC_MEMBERS No 7.1 SP1
MXMEMBER_MX_GROUP No 7.1 SP1
MXMEMBER_MX_PERSON No 7.1 SP1
MXMEMBER_MX_ROLE No 7.1 SP1
MXREF_MX_APPLICATION No 7.1 SP1
MXREF_MX_ROLE No 7.1 SP1
Relations
One MX_PRIVILEGE object can reference multiple MX_GROUP, MX_PERSON and
MX_ROLE objects. One MX_GROUP/MX_PERSON/MX_ROLE object can reference more
than one MX_PRIVILEGE object.
MX_PRIVILEGE object can be referenced to from MX_APPLICATION object.

Printer device group and a label format in SAP AII

Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
Peter

Hi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE.

Group and group counter in sap

Similar Messages

Maybe you are looking for