Group and Merge Delimited List

Hi All
Is there a way we can sort the result of Group and Merge processor->Delimited list values ?
I see none in the options and it seems sorting them in alphabetical order.
Thanks,
Sid

Hi Sid,
Yes, the "Delimited List" selection function in Group and Merge sorts the results into ascending alphabetical order. This was a deliberate decision so that the results of the processor are deterministic and agnostic of the order of the records entering the processor. It is not possible to change this sort order inside the processor but if required you can perform downstream post-processing of the data if you need to change the order.
thanks,
Nick

Similar Messages

When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list (I do with Mail.app)...?

When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list. I *do* when I use Mail, so it seems like a Thunderbird thing. I'd really like to see my own emails come back to me in the conversation so that I know where my remarks fall in the discussion; it's very disorienting when you can't tell if your email has arrived at the list, or not. I can't seem to find the setting, and I've searched thru your help topics, etc., to no avail. Thanks.

It's both gmail and mac.com email accounts, and it's all email lists -- including some privately hosted on servers, that are not Google groups, not Yahoo groups.
I'm not sure what you mean by "saving a copy of your messages yourself" in Mail -- if I email to the lists with Mail on my laptop or iPad, I can see it on my desktop computer too, right in line with other email messages in the thread, after the list resends the message I've submitted. It's only Thunderbird that this "invisible posts" behavior happens, and it didn't use to happen this way. I used to get my emails posting right in the thread.

Problems with grouped and merging layers

Sometimes when I combine layered .pdf files (by dragging pages in or doing Merge Files Into a Single PDF), the layers come in grouped (by file name) and other times they do not. Why is that? Also, is there a way to ungroup layers in Acrobat?
Any help is much appreciated!
For those interested in the background, I have a bunch of layered .pdf files that I want to combine. They were created from a single large Photoshop image sliced into page-sized pieces so the files all have the same layers and the layers are arranged and named the same in every file. I want the combined PDF book to maintain these layers so the user can, with one click, turn on or off a given layer across all pages of the PDF. Clicking on a layer on every page just isn't going to cut it.
I figured I would just combine all of the single PDF pages and then merge all of the layers of a given name so that I end up with just one layer for each type. The problem is that the merging works sometimes and not others. I can't figure out why, but it works far more often when the files combine without the layers grouped. It still doesn't work all of the time, but it NEVER works if the layers come in grouped - so I figure I would start there.
I'm using Adobe Acrobat 9 Pro. I used the method outlined below to turn my layered Photoshop (CS5) files in layered PDF files:
http://www.ehow.com/how_8296095_convert-photoshop-pdf-layers.html

After hours (and hours) of debugging Acrobat, I figured out that as long as the file(s) I drop in are not at the end of the document, then no layer groups are formed - all of the layers in both files are at the top level.
If I drop a file in after all existing pages, then the layers are grouped by file name.
and
If there are layer groups then merging fails. The names of the merged layers disappear from the layer list but the conent is left permanently visible.
If the layers are not divided into groups, then merging works most of the time. I haven't figure out why it occassionaly fails this way too, but so far it's been easy to work around.
This is Adobe Acrobat Pro 9 so no chance of it being fixed - so amybe this will help someone else in the same boat.

Retrieving User groups and email for all users in a group

Hi Everyone,
I need to create an ADF application to retrieve all the groups in OID, the user would select a group and it should list down all the email addresses in that group.
Can you suggest what is the best way to achieve this. My main concern is how to retrieve groups and email addresses from OID. I was unable to find APIs for it.
Your suggestions are greately appreciated.
Thanks,
Husain

In a multi-user environment, a user install a dreamweaver extension,but just the user who install the extension can use it.
Is there a way that administrator install the extension and make this extension available for other users in multi-user environment(e.g. the Windows 7)
Dreamweaver had this capability many releases ago, but it has been dropped, so it's no longer available.
Regards,
Randy Edmunds
Dreamweaver Development
Adobe Systems, Inc.

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

Tasl list group and group counter

hi,
i have one requirement . I have give internal number range to the task list. so my need to to create task list with one group and several group counter. But what is happening is when i run LSMW for that. seperate group numbers has been generated for each task list. is there any way to get the same group number with different counters using LSMW>

hi
since you have given internal number range for task list system will try to create task list with different group numbers .if you want the same group number with different group counter then i think you have to use the task list with external number and use the number created before
regards
thyagarajan

Site group and list of site

Hi Experts,
I have a requirement where I will be getting site group code,using which I need to find the list of site numbers that are currently part of the requested Site Group and send it back. In which table I can find the list of site numbers related to the site group code or Is there any function module to find the same.
Thanks & Regards
Sridevi S

Hi,
Use the function module "CLAF_OBJECTS_OF_CLASS". Pass following paramters
CLASS : <Site Group>
CLASSTEXT : 'X'
CLASSTYPE : 030
Output internal table structure T_OBJECTS will have the list of Sites assigned to this site group.
Regards
Vinod

I want to delete a group on my iChat list, but it doesn't go away when I right click and delete it. No ones in the group and I tried the plus button on the bottom left of the list and I can't find "edit groups"

I want to delete a group on my iChat list, but it doesn't go away when I right click and delete it. No ones in the group and I tried the plus button on the bottom left of the list and I can't find "edit groups"

WordPress is in a class of it's own. It began it's open source life as a blogging system but it has evolved into a powerful, feature-rich CMS (content management system). In short, if you elect to use WordPress on your domain, you might just as well use it for your entire web site.
To work with WordPress, you will need a firm understanding of HTML, CSS and how PHP includes work.
WP requires you to set-up a dynamic work environment (see links below)
Find a WP Theme you like that won't require much customizing on your part.
Related Links:
http://wordpress.org/
Get one of the following testing servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP development environment for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php_05.html
Creating a WordPress Theme in DW
http://www.adobe.com/devnet/dreamweaver/articles/creating_wordpress_theme_with_dreamweaver _pt1.html
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/

Command to list all email aliases /groups and members on the mail server.

Hi,
We are using SJS MEssaging server 6.2 .
Which is the command to use to list all email aliases/groups and members on the mail server.
Thanks,

sureshsamuel wrote:
We are using SJS MEssaging server 6.2 .
Which is the command to use to list all email aliases/groups and members on the mail server.Email aliases/groups can exist in text files in the configuration directory of Messaging Server or be defined in the LDAP Directory Server. You can use the "commadmin group search" command to list the ldap groups (if you have Delegated Administration installed/configured), otherwise you can use a directory ldapsearch to find the groups.
Regards,
Shane.

How to list users under multiple groups and users sub groups

Hi, I am stump, which is not hard to do. i have a list of groups and i want to list the users in those groups and then in the next column lists all the citrix only groups for each user. hopefully im describing that correctly. Heres what i have but it is
not listing the users groups. I am not sure how to proceed.
$CurrentDate = Get-Date
$CurrentDate = $CurrentDate.ToString('MM-dd-yyyy_hh-mm-ss')
$Groupname = "Distribution Lists"
$excel = New-Object -comobject Excel.Application
$excel.visible = $True
$wbook = $excel.Workbooks.Add()
$wsheet = $wbook.Worksheets.Item(1)
$wsheet.Cells.Item(1,1) = "Groupname"
$wsheet.Cells.Item(1,2) = "Member"
$wsheet.Cells.Item(1,3) = "ACID"
$wsheet.Cells.Item(1,4) = "Department"
$range = $wsheet.UsedRange
$range.Interior.ColorIndex = 19
$range.Font.ColorIndex = 11
$range.Font.Bold = $True
$intRow = 2
$groups = get-adgroup -Filter * -properties * -Searchbase "OU=Citrix,OU=Permission,OU=Groups,OU=Home Office,OU=domain,DC=Domain,DC=com"
$targetFile = "c:\temp\$groupname $CurrentDate.csv"
Add-Content $targetFile "Group;Member;ACID;Department"
foreach ($group in $groups){
$groupMembers = get-adgroupmember $group -Recursive | Get-ADUser -Properties Department, DistinguishedName| Where-Object { $_.Enabled -eq 'True' } | Select-Object Name, samaccountname, department, distinguishedname, @{n='MemberOf';e={$_.MemberOf -replace '^cn=([^,]+).+$','$1' -join '; '}
foreach ($groupMember in $groupMembers){
$groupName = $group.Name
$memberName = $groupMember.Name
$acid = $groupMember.samaccountname
$groups = $usergroups
#$department = $groupMember.department
$department = $groupMember.memberof
#$DistinguishedName = $gropmember.distinguishedname
$line = "($groupName)--------($memberName)-----($acid)-------($department)------($usergroups)"
add-content $targetFile $line
$wsheet.Cells.Item($intRow,1) = $groupName
$wsheet.Cells.Item($intRow,2) = $memberName
$wsheet.Cells.Item($intRow,3) = $acid
$wsheet.Cells.Item($intRow,4) = $groups
$wsheet.Cells.Item($intRow,5) = $DistinguishedName
$intRow++
$WorkBook.EntureColumn.AutoFit()
$excel.SaveAs("DL" + "name.xlsx")
$excel.Close()

Hi Glacket,
Below codes should give you headsup.
This command will give you estimate the result count for each group:
PS C:\Users\Administrator> Get-ADGroup -Filter {Name -like "TestGroup*"} | Select Name, @{Expression={get-adgroupmember $_ -recursive | Measure | Select -ExpandProperty Count};Label="Count"}
Name Count
TestGroup1 7
TestGroup2 8
Note that as said earlier we are getting duplicated results(12,13,14) for users belonging to multiple groups. Result is in order as per earlier code's count and order.
Get-ADGroup -Filter {Name -like "TestGroup*"} | get-adgroupmember -recursive | Select Name,@{Expression={Get-ADPrincipalGroupMembership $_ | Select -ExpandProperty Name};Label="GroupMemberOfName"}
Name GroupMemberOfName
User100 {Domain Users, TestGroup1}
User14 {Domain Users, TestGroup1, TestGroup2}
User13 {Domain Users, TestGroup1, TestGroup2}
User12 {Domain Users, TestGroup1, TestGroup2}
User11 {Domain Users, TestGroup1}
User10 {Domain Users, TestGroup1}
User1 {Domain Users, TestGroup1}
User19 {Domain Users, TestGroup2}
User18 {Domain Users, TestGroup2}
User17 {Domain Users, TestGroup2}
User16 {Domain Users, TestGroup2}
User15 {Domain Users, TestGroup2}
User14 {Domain Users, TestGroup1, TestGroup2}
User13 {Domain Users, TestGroup1, TestGroup2}
User12 {Domain Users, TestGroup1, TestGroup2}
Use below to export to CSV:
Get-ADGroup -Filter {Name -like "TestGroup*"} | get-adgroupmember -recursive | Select Name,@{Expression={Get-ADPrincipalGroupMembership $_ | Select -ExpandProperty Name};Label="GroupMemberOfName"} | Export-Csv C:\ListGroups.csv
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

How to get list of groups and the users from OID

Hi,
Can someone please tell me how to get the list of GROUPS and all the USERS in each group in OID using Java. Need to recursively get all the Groups and Users in each group using Java any samples.
Thanks

use examples from OTN like
http://www.oracle.com/technology/sample_code/products/jdev/readmes/samples/ldapdatacontrol/ldapapplication/src/dc/ldap/model/LDAPSearch.java
and modify it to your needs
Bernhard

How do I remove Facebook contacts from my Contacts list on my 4S??? I've already gone into iCloud settings and Facebook is not even an option to turn off and I've gone into "Groups" in my contact list and Facebook is not there either. How do I stop this

How do I remove Facebook contacts from my Contacts list on my 4S??? I've already gone into iCloud settings and Facebook is not even an option to turn off and I've gone into "Groups" in my contact list and Facebook is not there either. How do I stop this??

Hmmmm...maybe try deleting them again (I know it's a pain) and then doing a manual icloud backup (unless you already did this). Icloud may be putting them back on there. I never allowed FB to put the contacts on my phone lol. Also try going into Privacy and Contacts...make sure FB isn't on in there. Might be a few other spots to check under settings to make sure too. And...you might want to try deleting the FB app, do a icloud backup, and then reinstall FB

How can I use PowerShell 3.0 cmdlets or script to list all the local groups and local users of a server?

Using PowerShell 3.0 (And if possible the CIM, not WMI cmdlet), how can I script with | out-file C:\<filename>.txt or .csv option to list all local user accounts & local groups
on remote computers?
Thank You!

I don't recall PowerShell V3 introducing anything new to handle local users and groups. You need to use PowerShell V1 methods, using the [ADSI] accelerator and the WinNT: provider. The scripts linked above show this. No need to use WMI (which would probably
be slower).
Here is a script I've used to enumerate all local groups and their members:
$Computer
= "MyServer"
$Computer =
[ADSI]"WinNT://$Computer"
$Groups =
$Computer.psbase.Children | Where {$_.psbase.schemaClassName
-eq "group"}
ForEach ($Group
In $Groups)
    "Group: "
+ $Group.Name
    $Members
= @($Group.psbase.Invoke("Members"))
    ForEach ($Member
In $Members)
        $Class
= $Member.GetType().InvokeMember("Class",
'GetProperty', $Null,
$Member, $Null)
        $Name
= $Member.GetType().InvokeMember("Name",
'GetProperty', $Null,
$Member, $Null)
        "-- Member: $Name ($Class)"
A similar script to enumerate all local users would be:
$Computer
= "MyServer"
$Computer =
[ADSI]"WinNT://$Computer"
$Users =
$Computer.psbase.Children | Where {$_.psbase.schemaClassName
-eq "user"}
ForEach ($User
In $Users)
    "User: "
+ $User.Name
Richard Mueller - MVP Directory Services

[Forum FAQ] SharePoint 2013: Extracting values from a multi-value enabled lookup column and merge values to a multi-value enabled column

For some business requirements, users want to extract values from a multi-value enabled lookup column
and add items to another list based on each separate value. In contrast, others want to find duplicate values in the list and merge associated values to a multi-value enabled column and then
add items to another list based on the merged value. All of these can be achieved using SharePoint Designer 2013 Workflow.
How to extract values from a multi-value enabled lookup column and add items to another list based
on each separate value using SharePoint Designer 2013.
Important actions: Loop Shape; Utility Actions
Three scenarios
Things to note
Steps to create Workflow
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013.
Important actions: Call HTTP Web Service; Build Dictionary
Things to note
Steps to create Workflow
How to
extract values from a multi-value enabled lookup column and
add items to another list based on each separate value using SharePoint Designer 2013.
For example, they have three lists as below. They want to
extract values from the Destinations column
in Lookup2 and add items to Lookup3 based on each country and set Title to current item: ID.
Lookup1:
Title (Single line of text)
Lookup2:
Title (Single line of text), Destinations (Lookup; Get information from: Lookup1 in Title column).\
Lookup3:
Title (Single line of text), Country (Single line of text).
Important action
1. Loop Shape: SharePoint Designer 2013 support two types of loops: loop n times and loop with condition.
Loops must also conform to the following rules:
Loops must be within a stage, and stages cannot be within a loop.
Steps may be within a loop.
Loops may have only one entry and one exit point.
2. Utility Actions: It contains many actions, such as ‘Extract Substring from Index of String’ and ‘Find substring in String’.
Three scenarios
We need to loop through the string returned from the look up column and look for commas. There are three
scenarios:
1. No comma but string is non-empty so there is only one country.
2. At least one comma so there is at least two or more countries to loop.
3. In the loop we have consumed all the commas so we have found the last country.
Things to note
There are two things to note:
1. "Find string in string (output to Variable:index)" will return -1 if doesn't find
the searched for string.
2. In the opening statement "Set Variable: Countries to Current Item:Destinations" set the return
field as "Lookup Values, Comma Delimited".
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Destinations (Lookup; Get information from: Lookup1 in Title column).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup2.
Add conditions and actions:
Start the workflow automatically when an item is created.
Add item to Lookup2, then workflow will be started automatically and create multiple items to lookup3.
See the below in workflow History List:
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013
For example, they have three lists as below. They want to find duplicate values in the Title column in
Lookup3 and merge country column to a multi-value enabled column and then add item to lookup2 and set the Title to Current Item: Title.
Lookup1:
Title (Single line of text)
Lookup3:
Title (Single line of text), Country (Single line of text).
Lookup2:
Title (Single line of text), Test (Single line of text).
Important actions
"Call HTTP Web Service"
action: In SharePoint 2013 workflows, we can call a web service using a new action introduced in SharePoint 2013 named Call HTTP Web Service. This action
is flexible and allows you to make simple calls to a web service easily, or, if needed, you can create more complex calls using HTTP verbs as well as allowing you to add HTTP headers.
“Build Dictionary"
action:
The Dictionary variable type is a new variable type in the SharePoint 2013 Workflow.
The following are the three actions specifically designed for the Dictionary variable type: Build Dictionary, Count Items in a Dictionary and Get an Item from a Dictionary.
The "Call HTTP Web Service" workflow action would be useless without the new "Dictionary" workflow action.
Things to note
The
HTTP URI is set to https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be sort by Id in descending order.
Use Get
d/results(0)/Id form
Variable: ResponseContent (Output to
Variable: maxid) to get the Max ID.
Use Set
Variable: minid to Current List:ID to get the Min ID.
Use Copy from
Variable: destianation , starting at
1 (Output to
Variable: destianation) to remove the space.
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Test (Single line of text).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup3.
Add a new "Build Dictionary" action
to define the http request header:
Add a Call HTTP Web Serviceaction, click on
this and paste your http request.
To associate the
RequestHeader variable, select the Call action property,
set the
RequestHeaders property to
RequestHeader:
In the Call action, click on
response and associate the response to a new
variable: ResponseContent (of type Dictionary).
After the Call action add Get item from Dictionary action to get the Max ID.
Add Set Workflow Variable action to get the Min ID.
Add Loop Shape (Loop with Condition) to get all the duplicate titles and integrate them to a string.
Create item in Lookup2.
The final Stage should look like this:
Start the workflow automatically when an item is created.
Add item to Lookup3, then workflow will be started automatically and create item to lookup2.
See the below in workflow History List:
References
SharePoint Designer 2013 - Extracting values from a multi-value enabled lookup column into a dictionary as separate items:
http://social.technet.microsoft.com/Forums/en-US/97d34468-1b53-4741-88b0-958472f8ca9a/sharepoint-designer-2013-extracting-values-from-a-multivalue-enabled-lookup-column-into-a
Workflow actions quick reference (SharePoint 2013 Workflow platform):
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Understanding Dictionary actions in SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/jj554504.aspx
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Calling the SharePoint 2013 Rest API from a SharePoint Designer Workflow:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/

GREAT info, but it may be helpful to note that when replacing a portion of the variable "Countries" with a whitespace character, you may cause the workflow to fail in a few specific cases (certain lookup fields will not accept this and will automatically
cancel). I only found this out when recreating your workflow on a similar, but much more complex list set.
To resolve this issue, I used another utility action (Extract Substring from Index of List) to clear out the whitespace. I configured it as "Copy from
Variable: Countries, starting at
1 (Output to Variable: Countries), which takes care of this issue in those few cases.
Otherwise, WOW! AWESOME JOB! Thanks! :)

Failed to revert logical volume group while merging partition

Hi All,
Previously, on my macbook pro, I partitioned my disk for win7 for my dual operation system and only left 120 GB for OS, now I want to delete win7 and return disk space to OS. Currently my OS is yosemite.
I have already deleted disk space for win7 and merged it back to disk0s3. And, I had a problem to merge disk0s2 with disk0s3.
I was told it is because I need to revet my Logical Volume Group. I am blocked at reverting it.
This is my disk info:
rescomp-14-251133:~ rico$ diskutil list; diskutil cs list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         119.3 GB   disk0s2
   3:                  Apple_HFS Recovery HD             380.6 GB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *119.0 GB   disk1
                                 Logical Volume on disk0s2
                                 CC457129-6FE9-41A0-B0D2-F547F21A7555
                                 Unencrypted
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group F454017F-C531-43BA-B270-E2058E05BFF4
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         119290187776 B (119.3 GB)
    Free Space:   4096 B (4.1 KB)
    |
    +-< Physical Volume AC7A2748-0DA1-49D6-B50C-30348838760E
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     119290187776 B (119.3 GB)
    |
    +-> Logical Volume Family 4B7E6277-69BC-475A-BBB7-7A94D6434D9E
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Converting
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume CC457129-6FE9-41A0-B0D2-F547F21A7555
            Disk:                  disk1
            Status:                Online
            Size (Total):          118954639360 B (119.0 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
when I type unlock:
rescomp-14-251133:~ rico$ diskutil corestorage unlockVolume CC457129-6FE9-41A0-B0D2-F547F21A7555 -stdinpassphrase
CC457129-6FE9-41A0-B0D2-F547F21A7555 is already unlocked and is attached as disk1
It is already unlocked
then, I tried revert it
rescomp-14-251133:~ rico$ diskutil coreStorage revert CC457129-6FE9-41A0-B0D2-F547F21A7555
Passphrase:
Started CoreStorage operation on disk1 Macintosh HD
Error: -69750: Unable to modify a FileVault context
Does anyone how I can revert it, then merge disk0s2 and disk0s3

Here is another try via the command line:
dhcp-10-201-238-248:~ KyleWLawrence$ diskutil coreStorage resizeVolume BB2662B7-58F3-401C-B889-F264D79E68B4 210g
Started CoreStorage operation
Checking file system
Performing live verification
Checking Journaled HFS Plus volume
Checking extents overflow file
Checking catalog file
Incorrect block count for file 2012.12.11.asl
(It should be 390 instead of 195)
Checking multi-linked files
Checking catalog hierarchy
Checking extended attributes file
Checking volume bitmap
Checking volume information
Invalid volume free block count
(It should be 21713521 instead of 21713716)
The volume MAC OS X was found corrupt and needs to be repaired
Error: -69845: File system verify or repair failed

Group and Merge Delimited List

Similar Messages

Maybe you are looking for