Group and Ungroup without moving all data to one layer?

Good morning! When I group multiple features (usually for alignment purposes), ungrouping them then tosses all items onto one layer. This is quite frustrating; anyone know a workaround?

My coworkers and I realized this workflow is a hang-over from FreeHand. FH took issue with moving multiple objects, but did so happily if said objects were grouped. Ungrouping then released to the original layers. AI moves multiple objects without complaint! Thanks again!

Similar Messages

I got a new computer and need to sync my iPhone and iPad on it, how do i do that without losing all data.

I got a new computer and need to sync my iPhone and ipad on it, how do i do that without losing all data. I need help ASAP!

If you still have the old computer see: http://support.apple.com/kb/HT4527
If you don't have your old computer, but you made regular backups of it, restore the most recent backup using the backup software that you used to make the backup. You will have to read the instructions for it.
If you don't have your old computer and you did not back it up regularly see: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

How to sync my ipad to a new computer without erasing all data on it

how to sync my ipad to a new computer without erasing all data on it thanks

Check out this user tip from TuringTest:
https://discussions.apple.com/docs/DOC-3991
and this page on "How-to Geek":
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
Robbie

You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.

Grouping and UnGrouping of JTable Rows?

Hi,
Has somebody done Grouping and UnGrouping of JTable Rows as we find in MS-Excel.
Thanks & regards
blue

Hi,
Have anyone done something like this.
If u r not clear about the requirement:
Please see the screenshot uploaded at below url:
[http://www.geocities.com/coolneela/GroupableTable.JPG]
As shown the screenshot i want the Group 1 ,2,3 to be expandable and hideable i.e should behave like a Jtree node.....In rest of the column User can enter any input i.e for the columns A,B,C..
thanks & regards
Neel

How do i sync my iPhone with a different computer without losing all data?

How do i sync my iPhone with a different computer without losing all data?

look here:
http://support.apple.com/kb/HT1202

Phone has ben disabled. how do i turn it back on without loosing all data?

phone has ben disabled. how do I enable phone without loosing all data?

You don't, unless you have a recent backup of the phone. The only way to recover from a forgotten passcode is to restore the phone. You can then restore to your last backup. If you do not have a backup then you will lose your data. At this point you cannot create a backup. iOS: Forgot passcode or device disabled

Can you reset a forgotten password without losing all data on an iPod touch

How can you reset a forgotten password without losing all data.

You have to restore from the computer to which it is synced. Everything on the ipod should be on the computer so it can be put back on the ipod after restore.
http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

Conversion puts all data in one column

conversion puts all data in one column on excel

ok i created my own function
CREATE OR REPLACE TYPE t_varchar2_tab AS TABLE OF VARCHAR2(4000);
CREATE OR REPLACE FUNCTION tab_to_string (p_varchar2_tab IN t_varchar2_tab,
p_delimiter IN VARCHAR2 DEFAULT ',') RETURN VARCHAR2 IS
l_string VARCHAR2(32767);
BEGIN
FOR i IN p_varchar2_tab.FIRST .. p_varchar2_tab.LAST LOOP
IF i != p_varchar2_tab.FIRST THEN
l_string := l_string || p_delimiter;
END IF;
l_string := l_string || p_varchar2_tab(i);
END LOOP;
RETURN l_string;
END tab_to_string;

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

My i phone 3gs seems to have crashed and all that is on the screen is the i tunes logo and the usb cable, will i lose all my data if i restore the phone or is there a way of doing it without losing all data ?

my i phone 3gs has crashed and all that is left on the screen is the i tunes logo and the usb cable picture, when i plug the phone into my laptop its asking me to restore the phone and this will erase all my data. is there any way around this so i dont lose all my pictures ?

Connect your iphone to your computer
Hold down the home button and the power button until the screen goes blank
Turn back on your phone.
Your phone has seemed to enter recovery mode, but its ok! The steps above should bring it out

TS3274 When I try to backup my iPad it says there is an error and can't finish without losing all data

I'm trying to update to the current operating system but when I sync my iPad and try to back it up an error message appears and says all data will be lost and it is unable to back up??

Hello,
Try completely reseting the device back to the factory defult, then try to restore it again.
I hope that works.
~Lt. Leviathan

Group and Ungroup without moving all data to one layer?

Similar Messages

Maybe you are looking for