Group asset field is greyed out

Hi
I have created group assets. I given tick in group assets in SPRO for determining depreciation area and asset class. In layout, group asset field is made optional. Inspite of this in asset master, then entire tax depreciation area line is greyed out and so group asset tick is also greyed out.

Hi,
Suppose if you have created a group asset like XXXX.
Now you have to enter this group asset number XXXX in the normal assets, for which you want to valuate at group asset level.
Have you checked in AO21, for the screen layout rules 1000 and 2000, the field Group asset's field status is set to optional or not....
For normal assets, in dep areas tab, the group asset dep area will always be greyed out. Click on that grey out field and enter the group asset number (XXXX) and SAVE.
Note: Group asset functionality is to valuate / depreciate the assets in a dep area at a specific group asset level with an higher / lower dep rate.
This will resolve your issue.
Thanks,
Srinu

Similar Messages

J1iex-duty fields are greyed out

Dear all,
while doing j1iex, all the excise duty fields are greyed out? The quantity field is also in grey in colour. What might be the reason? Please suggest.
Thanks & Regards,
AR

Dear pankaj singh,
My question is i havent even captured the excise invoice. I did MIGO with only part I. Then came to J1IEX and tried capturing excise invoice. There i find all the duty fields are greyed out. It might be due to some note number. Please suggest.
Thanks & Regards,
AR

For Z Po order type - Item category field is greyed out.

Hi MM Experts,
I am an ABAper working on PO creation with respect to PR( PR with account assignment N) for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
Thanks in Advance
Pravee.

Hi All,
Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
Thanks
Pravee.

Fields not greyed out in display mode in screen exit

Hi all,
i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
please provide any solution as soon as possible.
thanks in advance

In the PBO in your screen exit:
IF sy-tcode EQ 'CJ03'.
LOOP AT SCREEN .
if screen-name 'your field'
screen-input = 0.
screen-output = 1.
MODIFY SCREEN.
ENDIF.
endif.
what enhancement are you using?
bye

Scess value field is grey out in MIGO while posting rejection excise invoic

HI..
In Return delivery ,i am capturing & posting excise invoice...
The problem is while we can change the values of BED,AED,ECS but the SCESS field is coming grey out.Therefore i cannot change it.
How can we remove the grey out so that we can enter manually whatever amount we have credited.
here the print program is made considering in MIGO we can capture/post excise invoice..
plz reply fast.
Thanx & regards,
Satpal

When it is return delivery tranaction and if you don't select no excise entry system by default captures all data from original document except quantity field and hence all the fileds will be non modifiable. However it is better to select 'No Excise Entry" at the time of Return Delivery and then go for "create excise invoice for other movements" T Code "J1IS" so that you could enter all the duties correct based on the qty rejected in return delivery.
Hope it would suits you.
Cheers

Server 4.0 can't edit users and groups. All options greyed out.

I have upgraded the mac mini server from Mavericks to Yosemite and had to update to Server 4.0 and having many issues.
One issue is I can't edit users and groups. All the options are greyed out.

Search the System keychain on the server for application passwords with the name "/LDAPv3/127.0.0.1" and delete any you find. Sign out of the Server app and sign back in using the FQDN of the server, not "localhost" or "127.0.0.1".
Credit for this observation to ASC member Peter Jurg2. See also this discussion.

Hierarchy Authorization field not greyed out in portal

Hello Gurus,,
I have a query,which has profit center as one of the selection variable and which has a a hierarchy on it. The Analysis authorization variable was created for the hierarchy. So it works fine in Bex Analyser,but when the same is run in portal,,, the authrozation field ( profit center) is not greyed out,but the F4 help shows just the authorized values alone ,which is good. But the issue is the enduser seems to be entering values manually,,,thereby the report runs for unauthorized values as well.
Can someone tell me,,if this could be a bug in sap,,, the field with authorization is
not being greyed out.,,,,,,,,is there any work around because the user wants it optional,,,,,,,
This is on 2004S version of BW.,,,,,,,,,,,,,,can someone guide me through this.....
Just to confirm,,only the nodes show in F4,,but is it standard functionality that the leafs doesn't show up in F4,when a leaf alone is selected as the hierarchy node in RSECADMIN................
your help shall be rewarded,,,
thank you in advance..
srinu

Hi
Thanks for ur advice.
I have tried what you said by activating and Deactivatin the RFC comm channel in ID but the same result.
I have also checked the Max connections in the RFC channel.
All in vain
Expecting more expert suggestions
Regards
krishna

Unable to group objects - it's greyed out all the time

Hello,
I am using Page's 09 (version 4.0.3 build 766). I have a document with many self made graphics using text boxes, shapes and connection lines. No matter what, I can not select group objects. If I select two, three, four, or more it is always greyed out.
Is this a nasty issue with Pages? Anyone else experiencing this?
- Aaron

Sorry, Aaron, I must have been seeing fruhulda's equipment profile and thinking it was yours.
Well, there have been an incredible number of manifestations of problems with iWork and the 10.6.2 incremental update. I wonder if there are any other issues that you may not have mentioned because they don't seem related to this one.
As Yvan says, what you want to do is something that works well on a properly functioning system. All manner of things have gone wrong for those who have installed 10.6.2.
I haven't installed 10.6.2, so I don't have first hand experience with this, but posts indicate that you must have a properly updated iWork first, and then do the Combo Update. After that you hold crossed fingers behind your back, or something like that.
Jerry

ME57-Assign manually** fields are GREYed out**

HI Gurus,
When the user tries to use ME57 transaction to assign the vendor and purcahse organization by clicking on " Assign Manually" the purchase org data has been GREYed out and is not modifiable. What may be the cause for this issue? Has some user setting been maintained? or is it a GUI related issue? Please help.
Thanks
Shash

Hi Shashidhar,
I am also facing the same issue. Please let me know, how did you resolve this issue ?
Thank you
Rudresh

LAUNCHPAD SEARCH FIELD PERMANENTLY 'GREYED' OUT

strange as it used to work, unable to type in the box now.
Cheers

Hey not sure if it has been fixed for you but I had this problem after updating to 29.0.
I realise you completely reset/reinstalled everything so this might not fix it but all I had to do was Clear all browsing data(Ctrl+Shift+Del) and then use 'Exit Firefox' from the drop down menu(not the window's top right close button)
For whatever reason that fixed it and I can now restore sessions/restore closed tabs.

How to grey out the Account Assignment Group Fld in Billing Doc Line Item

Hi SD Guru's
I have a small doubt.
I have maintained account assignment group in material master. Now when i create an order , the account assignment group gets picked from material master into this sales order.
Now i go to VF01 for doing the invoicing.
Now i can still go to billing document line item against the material and change its account assignment group before raising the invoice. When i change this field, i can still post to accounts.
I want to know is there any way in which we can restrict the way in which this field is greyed out and is made non-editable, so that only correct entries with account assignment group maintained in material master are posted.
Answers will be appreciated.
Kind Regards
Ravi

Hi,
Sandeep can you please give me step by step process of using SHD0 in this case.
Now if i apply this to transaction VF01 and VF02, would it apply for all billing document types? I dont want that, i want it to work for a specific billing type
Kind Regards
Ravi

Grey out of MDM managed fields in R/3 4.7 (Interface between R/3 & SRM)

Hi All,
We have requirement for Creation/extension/changing of MMR (MM01/MM02/MM12).
Current Process:
Creation of MMR for certain material types carried out by MDM team from SRM side.In this case these materials replicated from SRM-MDM to R/3 4.7.
In such case core users from R/3 side can able to change MM fields relevent to MDM managed to fields.So that we want to restrict these fields (Replicated from MDM).to further change
The changes to MMR is only from the MDM side.Not from R/3 side
we dicided to make these fields grey out(Not Editble).through ABAP Development
case1:
If we go through standard configuration of field stutus as a grey out from Field selection/Field Reference.based on materials types/Transaction.then we will face problem while replicating master data from MDM to R/3 .this means that
If we r creating/changing materials from MDM side.and replicated to R/3 side.
Because in R/3 side if i make these fields as grey out .It won't take input values while replicating data from MDM to R/3.so i could end up with idoc error.
Finally the above process is excluded
case2:
If want to go through ABAP development,plz guide on this
If any one face this kind of requirement.Plz guide me

closed

PA30 - Personnel Number field greyed out - No input help available.

Hi Experts,
In our System in DEV, & Quality in PA30, we are unable to select employees either by directly giving the number (greyed out) or by selecting through F4 (No input help is available).
But in Production System we can directly give Pernr or select through F4.
Any body tell me what is the reason behind this.
Thanks in advance.
Samanvita.

Hi Hariprasath,
It is not the issue with NUMKR, The number Ranges are already maintained, and are defaulted in NUMKR feature.
This is showing same in DEV / QA/ Prod.
Issue is in DEV / QA, The Personnel Number Field is Greyed out, and not able to select any number.
For that we are going to PA20, open the personnel number first, and open PA30 in another window, then we are changing the data of the employee.
But we want to give Personnel Number in PA30 itself as per SAP Standard.
Any Idea, why it is like this.
Thanks,
Samanvita

SECess field Greyed out in MIGO

Dear All,
I am processing for first stage delear invoice where I need to give the ED values manully.
I have given for BED, AED, ECS. But SECess field is greyed out (non editable mode) so i am unable to give the value.
Kindly suggest to make that field as editable so that i can give the value.
Rgds
Srini

No suitable reply hence closed.

MRP - Sales order and customer fields grey-out

Hi there,
The Sales order and customer fields are grey-out for all MRP generated production orders. Can the SAP programmers please get this fixed? It should either read in the sales order number and the customer number or allow user to type in the sales order, just like the manually created production order.
cheers

Hello Gordon,
If production is make-to-order rather than make-to-stock, the MRP should read in the sales order number and the customer, since it is specific to the sales order. Even for make-to-stock production, where it cannot read in the specific sales order number, it should at least not grey out the field, don't you think so? By greying out the field, users are not allowed to type in the sales order number even when the production order directly relates to a particular sales order. As such, we are not able to link it back to the sales order where other info such as customer's purchase order, etc... can be found.
Could you please advise alternative way of linking MRP generated production orders to the sales orders? thanks

Group asset field is greyed out

Similar Messages

Maybe you are looking for