Group by in BEx query designer

Hello experts,
I'm new in BEx query designer and I'm currently working on displaying the maximum of a list of values and group them by calendar day like the exemple below:
CalendarDay
Client
Amount
02.09.2014
A
3000
02.09.2014
B
2000
03.09.2014
A
1500
03.09.2014
B
1600
The result I need to display is as below:
CalendarDay
Amount
02.09.2014
3000
02.09.2014
2000
OverAll result
3000
03.09.2014
1500
03.09.2014
1600
OverAll result
1600
What's the best solution for this ?! is it to work with calculated Key Figure or Exceptions ?! Would any one help me to get such result.
Thanks a lot

If you need to show the data as you mentioned then i think you are suppose to keep client in rows and also you have to switch on the result row display for that characteristic.
Because if you remove it then data will get aggregated based on calday and it will become 2 records only.
To get the maximum value you have to use Exception aggregation.Create a new formula and put the amount kf inside it.Hit the aggregation tab--Exception aggregation as maximum--Reference characteristic as client.
If this does not work then we can also apply nested aggregation based on calday.
Regards,
AL

Similar Messages

Drill down ( Collapsible Row ) Report in BEx query designer ?

Dear Friends!
I am supoosed to create a report drill down report for Purchasing History to be precise, I know that we can have drill down feature using heirarchy but is it possible for Us to have PO & PO item heirarachy ? or any other way to do drill down reporting in SAP BEx Query designer ?
like my current report is : -
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Now I am supposed to create a report in which
normal view
| Vendor | Purchasing Organisation | Purchasing Group | Plant | |> PO Number| .... ( keyfigures) | Payment |
drill down or collapsible view ( please consider the heading as data I am not talking about dynamically change of headings ).
| Vendor | Purchasing Organisation | Purchasing Group | Plant | V PO Number | Item | Material / Service | Description | .... ( keyfigures) |
is there anyway to design the report in above mention manner ? you any input will be appreciated greatly.
Thank you so much!
Regards
Naim

Hi Naim,
usually we don't do the transactional data as hierarchy. not sure the reason behind your requirement.
we can do one of the below :-
1. To have the default view as
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
and then user can drill down on rest of the characteristics for detailed view later on.
2. or if they don't want to drill down on characteristics;-
we can build 2 reports , one for header level information and then jump to second query for detailed information(item level) using RRI.
first query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
second query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Let us know if this works out?
Regards,
Sakthi.

Error while openening InfoProvider in Bex Query Designer

Hi all,
i am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Exception CX_RSR_MESSAGE in program SAPLRRMS
RRMS_X_MESSAGE
Main Program: SAPMSSY1
Include Program: LRRMSU13
What could be the problem?
Thanks in advance
Andreas

Hello Andreas,
seems as if JCo Connections on your system have not been set up correctly.
Please have a look here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
Regards,
Daneil

BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
Nivia

Hi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Message in BEx Query Designer Formula

Hi Experts,
I need to display message based on the value of the formula result. For Example:
If K.F1 =<2.5 Then <Message: ODD>
ElseIF K.F1 >2.5 Then <Message: Even>
Else
<Message: Determine the value>
EndIF
Thease above messages would be build in the formula column of BEx query designer
Thanks and really appreciate your response.
Regards,
Waseem

Hello,
I have done the same funtionality with the help of workbook.
May be experts can guide us how to display messages in the formula column of BEx query designer.
Thanks.
With regards,
Anand Kumar

Drilldown in BeX Query Designer

Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
Debayan

Hi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati.

Division in bex query designer

Hi experts,
I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
I have tried the following in Bex query designer
-25124 %A -91248 = -0,02753%
(-25124/-91248)*100 = 0,02753
What might be the problem here?

Thanks again for your answer,
I will try to explain my report (requirement from the business user)
Actual (KF)----
Budget (KF)
Sales-- -91248--
-77153
FSP-- -25124--
-18918
Margin % -
(FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
Dim
Dim
Result
The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

% Calculactions in Bex Query Designer

Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
    Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                               ( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
                                                              = 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank you

Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck.

Where to write IF THEN ELASE statements in BEX Query Designer

Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.p

hi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem...

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Difference between aggregation and calculation tab in BEx Query Designer

HI,
I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in the properties tab i found aggregation tab and calculation tab.
I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
I not able to used that Aggregation tab it is showing as a hidden fields...
can any one tell me whats the exact difference between these tabs and when we need to use which tab?
With Regards,
Thanesh Kumar.

Hi Thanesh Kumar,
I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
I could explain to you the difference between these two tabs.
For "calculation" tab, it changes the display of result and does not change the calculation logic.
It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting) is used for further formula calculation.
For "aggregation" tab, it changes the real calculation logic.
The system takes the setting as the aggregation rule for records.
The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
Average instead of summation when aggregating records. And the Average value will be taken for calculation
in further formulas or other calculations.
For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
a basic key figure. That should be the reason why you see it greyed-out.
Regards,
Patricia

New ratio doesn't appear in Bex Query designer

Hello Experts,
I added 2 ratios to my infocube. It activated without any problem. I then added these 2 ratios to my multiprovider and activated it after affecting them to the previous infocube.
Then I connected to the Bex query designer and loaded a report in order to add these ratios, but there are not available for selection in the Ratio menu of the multiprovider.
Has anyone faced this problem?
Thanks

Try reactivating the Multiprovider again and see if that works !
I had this issue earlier, where I couldn't see two of the newly added characteristics in the multiprovider. But simply reactivating the multiprovider solved my issue.
- Danny

Usage of formulas in conditions in BEx Query Designer

Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
Clemens

Hi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh.

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Group by in BEx query designer

Similar Messages

Maybe you are looking for