"Group cannot be used" in cj40 tx

Dear all,
Need your help in to resolve this issue.
I am trying to do cost planning using the tcode CJ40 and am following the steps mentioned below,
1) I created a cost element group in KAH1. All the cost elements have been created in the same controlling area and i have checked the validity of these cost elements.
2) I assigned this cost element group in transaction OPSB.
3) Now ,when i am executing transaction CJ40 and clicking on the Primary Costs button i am getting following error
"Group cannot be used
Message no. K8001
Diagnosis
Group has not been created in controlling area for the characteristic used, neither does it exist as a node within the group.
System Response
The SAP System rejects the row/column structure for group .
Procedure
1. Create group with the group maintenance transaction.
2. Or, correct the name of the group in planning layout or in the initial screen for planning."
Request you to kindly correct me and help me in solving this issue. I have checked everything from my side.
Thanks & Best Regards,
sri

Hi Srikanth,
Please check the notes mentioned below. Hope you find them useful.
99728, 121055, 99934
Regards,
Gokul

Similar Messages

Acquisition tax group cannot be used this way

Dear Experts,
I'm trying to generate a Journal Entry using SBO 2007 SP01 using 2 accounts.
When I click on create boutton I get the following error message:
DSC1 - The acquisition tax group cannot be used this way for this transaction - Message 200-48.
Could you please tell me whu do I get this error and cannot create the JE?
Thanks a lot for your help.
Kind regards,
Walid.

Dear Gordon,
I desactivated the SP and the result is always the same.
Do you know what does this message concretely mean?
Thanks for your help.
Walid.

Error with iTunes "The iPod Group Storage cannot be used with iTunes...."

I bought a usb hub to accomodate my multiple usb devices. I plugged my iPod into this and got the following error:
"The iPod Group Storage cannot be used with iTunes because it is not formatted properly."
I plugged the iPod into the computer rather than the hub. Same thing
Tried to restore, per the error message's direction. It says it has restored it to factory settings, then it brings up that message again.
I uninstalled and re-installed iTunes. Same thing. It was playing fine but it needs re-charging now and it won't because of the error.
Does anyone have any ideas? I don't know what to do now.
Thanks.

Try to reset your iPod using the recovery mode as described in this support article
However, this will erase the iPod completely. If you have an iTunes-backup on your computer you can restore your iPod settings later from the backup.
I have never tried this in WIndows, however. The procedure might be slightly differeent.

Aggregate functions cannot be used in group expressions

Hi have report showing sales by Vendor. I need to list all the vendors with Monthly Total>5000 and combine the rest as "OTHER VENDORS"
Vendor is a Group in my report, so I tried to put an expression as a Group on:
=IIF(Sum(Fields!Mth_1_Sales.Value)>5000,Fields!Vendor_No.Value,"OTHER VENDORS")
I've got an error: "aggregate functions cannot be used in group expressions"
How do I get Vendors with Sales < 5000 into "OTHER VENDORS" ?

Hi,
You need to group by Month on group expression,
And you can use the same expression in the report column as
=IIF(Sum(Fields!Mth_1_Sales.Value)>5000,Fields!Vendor_No.Value,"OTHER VENDORS")
Many Thanks
..................................................................................................................................................................Please
mark the post as Please mark the post as answered if this post helps to solve the post.

Gl account cannot be used when creating Purchase requisition

Dear Experts,
I have the following error message while creating PR :
G/L account xxxxx cannot be used (please correct)
Diagnosis
Comparison of the field selection strings from the G/L account xxxx and the account assignment category W reveals that there is an incompatible combination of field selections for the field selection group 'Business area'.
I have checked through FS00, the account xxx is a PL statement account and the field status group is Z002.
How to correct this error?
Where is mapping between GL account and account assignment category in PR?
Please advice.
Thank you.

Hi Srinivas,
Thanks for the answer,
I have mitmatch between OME9 and FSG in OBC4 but still facing error : "Comparison of the field selection strings from the G/L account xxxx and the account assignment category W reveals that there is an incompatible combination of field selections for the field selection group 'Commitment item'.
The 'commitment item' between OME9 and OBC4 is the same (optional entry).Kindly advice.
Thanks.

G/L account 400044 cannot be used - Error

Hi All,
Could you please get me a solution on the following scenario where the G/L Account has been created in the CoA and Ccode and been correctly assigned in OBYC But,the following error occurs when I create a PR..
G/L account 400044 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 400044 and the account assignment category K reveals that there is an incompatible combination of field selections for the field selection group 'Earmarked Funds'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account
Regards,
Deepak.

Hi
Goto FS00 and enter the GL account and select create/Bank/interest tab and identify the FSG.
Goto OBC4 and select above FSG and goto Additional account assignments and check the field earmarked funds field status
Goto Tcode OME9 and select K and check the status fo the field.
Both are different.
Cheers
Srinivas

System extension cannot be used --can anyone help ?

so i spotted that the system library as well as the home library had permissions blocked for the administrator, so i unlocked all enclosed items permissions.
i already had issues being brought to senior advisor attention over 1,5 years now, about hangs and freezes. mostly hangs.
no one so far has been able to fix them.
well now spotting these warnings, after i allowed all permissions inside both libraries, have warnings show up.
i gather these are not prepperly installed softwares, but i cant figure out what softwares they could be, so i can take care of it.
so 4 warnings shows up :
System extension cannot be used
The system extension “/System/Library/Extensions/System.kext/PlugIns/Unsupported.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
System extension cannot be used
The system extension “/System/Library/Extensions/System.kext/PlugIns/Private.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
System extension cannot be used
The system extension “/System/Library/Extensions/IOPCIFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
System extension cannot be used
The system extension “/System/Library/Extensions/IOUSBFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

There isn't an "administrator" so who did you add and what permissions did you set.
In Get Info, they should be
system read & write
wheel read Only
everyone read only
The posix permissions, owner, and group should be
rwxr-xr-x root wheel
with ACE "group:everyone deny delete"
You may be able to recover by repairing permissions in Disk Utility, but you may have to reinstall the OS.

QoS: Multiple acl entries cannot be used in match-any in class Match_XY

Hello All,
I'm getting below error while trying to add the two extended ACL in the class-map for classifying the traffic. Is there any way I can add two extenteded ACL in the same class-map for classifying the traffic.
Error log: "QoS: Multiple acl entries cannot be used in match-any in class Tag_AF13"
device details: cisco WS-C6506-E with Supervisor Engine 2T
IOS version -s2t54-adventerprisek9-mz.SPA.150-1.SY1.bin
R1(config)#class-map match-any Tag_AF13
#match access-group name XX
#match access-group name XY
QoS: Multiple acl entries cannot be used in match-any in class Tag_AF13
Regards,
Thiyagu

Hi Rajan,
Thats because of the logic used for ACl operations, as per your config you are class-map match-any. The match any argument says that the class map must match either of the two arguments supplied.So lets take a look at how the sequence of operations of how this will be interpreted by your class map.
1> Any particular packet will be first matched against the first ACL "XX".
2> Suppose there are 10 entries there if it matches any of those entries the appropriate action will be talen.
3> If none of those entried match the packet there will be an implicit deny at the end of the ACL( default behaviour of ACL's)
4> In that case the packet will match the implicit deny and will get dropped.
5> The packet will under no circumstances go to the next ACL "XY"
Thats the reason multiple ACL's aren't allowed by the IOS.
You can try to collate both ACL's and put them in just one ACL that should work well. If you need help please pots both the ACL's.
Please do let me know if you have any further questions
HTH
Regards
Umesh

Why Scalar Subquery expression cannot be used in HAVING clauses?

Hi All,
I'm new to SQL. I'm confused with Scalar Subquery.
Is there anyone who can answer me why Scalar Subquery expression cannot be used in HAVING clauses.
Can you show me a example?
Thanks very much,
Xianyi.Ye
Edited by: 908428 on 2012-1-16 下午7:24

Hi,
908428 wrote:
Hi Frank,
Thank you for your quick reply. I also agree with your point.
But when I read the book, "OCA Oracle Database SQL Certified Expert Exam Guide",( link to illegal copies of book removed by moderator )
on Page 359, it said that
Scalar subquery expressions cannot be used in the following locations:
1. In CHECK constraints
2. In GROUP BY clauses
3. In HAVING clauses
4. In a function-based index (which is coming up in Chapter 11)
5. As a DEFAULT value for a column
6. In the RETURNING clause of any DML statement
7. In the WHEN conditions of CASE
8. In the START WITH and CONNECT BY clauses, which we discuss in
Chapter 16.7 and 8 are wrong. Scalar sub-queries can be used in WHEN conditions and START WITH and CONNECT BY clauses. (At least in Oracle 10.2. Is the book based on some earlier version?)
Edited by: BluShadow on 17-Jan-2012 09:08

G/L account 156116 cannot be used (please correct)

Dear all,
When i create a PO from a PR (of Third party sale process), i get an error:
G/L account 156116 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 156116 and the account assignment category X reveals that there is an incompatible combination of field selections for the field selection group 'CO/PP order'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Pls give me your suggestion.
Thanks,

> G/L account 156116 cannot be used (please correct)
> Message no. ME045
Go to FS00 and Select your Account and In Create / Bank / Interest Tab Double Click on Field Status group and Check the Business area Field is Set to Optional Entry. (If its set Dont Change any thing)
Now Go to OME9 and Select your Account Assignment X and Double Click and Check the Business area is set to Optional Entry. (If its Not Set then Change the Same and Save)
Logic is Both Business area Settings should be Same.
Regards,
Ashok

Field groups cannot be created in the OO context.?

Hi All,
The current ABAP command is obsolete while using Field Group in ECC6.0.
I am getting this error "Field groups cannot be created in the OO context." How to replace Field groups with some other statement.
Thank you,
Swapna.M

Hi Madhavi,
There is no other solution than rewriting the program, e.q. by creating internal tables for the fields now defined with FIELD-GROUPS in HEADER and ITEMS and looping over these tables.
Regards,
John.

How to delete / remove a group in AD using LDAP?

Can anyone please point me in the right direction to code the ability to delete or remove a group from AD using LDAP? Is this even possible? I'm surprised I cannot find anything related to this action.

How would you delete any other object using LDAP ?
Why do you think deleting a group is any different ?
String groupName = "CN=Idiots,OU=Developers,DC=Antipodes,DC=Com";
// Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
// Delete the group, and wishfully all the idiots that ask stupid questions
ctx.destroySubcontext(groupName);

Function group cannot be processed

Hi All,
I have added a new field to an already created custom table. when trying to regenerate the table maintenance generator i get an information message "*function group cannot be processed*". The reason being that the function group is inactive. I tried to activate that function group. But then found that there were some errors because of which i couldn't activate it . it showed that an Include report was not found. That include is reserved for function group includes. What do i do to solve this problem.
Edited by: Herwin Wilmet Dsouza on Dec 10, 2009 7:58 AM

Hi,
The best thing to do when you add a custom field in the custom table is to degenerate the TMG, the View and then activate the Table using SE14 (Database utility) and then from the View again use the TMG to generate the Maintainance Views.
Yes, this is a lengthy process but at least this is good as it will ensure that the Function Group is activated and the views will work properly.
Note : If you have added your own logic or code in the TMG for any additional functionality you need to take a backup of the code or all the relevant objects (e.g. Include Reports,etc) as once you do a new generation of the same function groups this will be over written.
Hope this helps.
Thanks,
Samantak.

Reg.G/L account 221004 cannot be used

Dear All
In our IDES system I am trying to raise Process order with E & L combination,If I do so,the following error occured.
Please help me.
"G/L account 221004 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 221004 and the account assignment category E reveals that there is an incompatible combination of field selections for the field selection group 'Earmarked Funds'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account."
Thanks
Rajakumar

HI,
Its the incosistancy between the FSG of GL a/c 221004 and the moment type. Go to OB14 and select the FSG assigend to the GL account and make Earmarked funds in Additional Account assignment node as optional.
Or
If you read the error message till end the system in the error message also refers to a program by name "RMCUFA00" or sataring with name RMCU.
Go to SE38 and give the program name and run. You will see the inconsitancies for the GL account and the moment type.
This will solve your problem.
Reward if useful.
Sarma

G/L account 410851 cannot be used

Dear Experts,
I am doing Individual Purchase order, when i am trying to raise Purchase Order with reference to Purchase requisition system is throwing an error
"QUOTE
G/L account 410851 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 410851 and the account assignment category I reveals that there is an incompatible combination of field selections for the field selection group 'WBS element'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account.
UNQUOTE"
Please help me out to solve this
Rewards Assured
Kind Regards.
Ripon

Hi,
Check the field status group assigned to G/L account 410851 and check in OBC4 t.code again for field status group in some segments of material management/ accounting , the field that are suppressed, make the field optional or assign a different FSG to the G/L (or code the purchase to a different G/L account).
For more check teh link:
https://wiki.sdn.sap.com/wiki/display/ERPLO/Error%20MM
Regards,
Biju K

"Group cannot be used" in cj40 tx

Similar Messages

Maybe you are looking for