Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

[CS4 Server Win]: Plugin does not run on Windows Server 2003?

Hi,
can anybody help?
My plugin is running on Windows XP and Windows Vista.
On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 my plugin is not running, the scripting methods are not visible in ExtendScript Toolkit!
What is missing?
Thanks,
Alois Blaimer

> I am using Visual Studio 2008 with the VC++ 9.0 compiler.
> Could this be a problem?
Yes.
CS4: use VC2005 + SP1
CS3: use VC2005 without SP1
CS2: use VC2003
In my previous post I described one of the problems I found out the hard way - walking around in disassembler is a pain, even more Intel and Windows, comparing to Mac, and PowerPC. Since then I only use the official tools even if others tell it worked for them, and I keep the InDesign installations for final build and test on the earliest supported operating system.
Dirk

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

Addon not working on Windows Server 2008 OS

Dear Friends,
I have developed an addon in XP and its working fine with XP operating system but it is not working on Windows Server 2008 Standard. Error is "An Attempt was made to load a program with an incorrect format.(Exception from HRESULT: 0x8007000B)".
Regards,
Mahesh.
Edited by: mahesh A on Sep 19, 2009 9:26 AM

Hi,
Since only Windows 2008 SBS is supported with SAP Business One and that Server is available for 64bit Hardware as defined by Microsoft, I guess you should look into that direction.
Regards
Mario

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

MFA not working on Windows Server 2012 R2

Been using MFA since PF days. Deployed it successfully many times but for some reason it's not working with Windows Auth, Terminal Services on a Win 2012 R2 DataCenter box? The machine was successfully added to my domain PhoneFactor group, I
can see and add the machine on the master MFA. Services are running but when I remote in I go right through without MFA stopping me? Any ideas?
TIA

6.3.0 has just been released and 2012 R2 is *still* not supported. What the hell?!?
"Version 6.3.0 of the Azure Multi-Factor Authentication Server adds the
following additional functionality:
* Added one-way SMS functionality for AD FS, RADIUS and User Portal
* Added .csv file import for OATH tokens
* Added support to parse phone numbers in E.164 format during import
From the directory
* Fixed problem preventing slave servers from performing MFA if the
master server was unavailable. This problem was found to exist in
all 6.2.x builds. All customers running 6.2.x should upgrade to 6.3.
* Fixed directory sync issue for recursive security groups
* Added additional logging to AD FS adapter
* Other minor bug fixes and security improvements
Known Issues:
* Windows Authentication for Terminal Services is still not supported for
Windows Server 2012 R2"
So they added a whole stack of other functionality, but still didn't get around to taking a look at this bug. I'm stunned. Is there any sort of timeline on fixing this, or is 2012 R2 just going to remain unsupported forever?

SQL-Server detection/discovery does not work in win 10 build 10041

Hello,
I'm using the default .NET-function to detect SQL-server-instances in the network. It works fine in win xp, win7, win8 up to win 2012r2. It also works in earlier win 10 builds, but it's broken in build 10041.
It's reproduceable with the powershell-call
[System.Data.Sql.SqlDataSourceEnumerator]::Instance.GetDataSources()
On other systems the function call takes about 10 to 15 seconds before returning a list of SQL instances in the network. Under win 10 build 10041 it returns immedeately without any results.
Please fix this problem before the final build!

Share: The abiltity to place a link to the feedback-"post" somewhere else ... facebook, twitter, or this forum here.
I've only a virtual machine with windows 10 installed. So it's really annoying, that I have to log on on to check the state or the "me too" count of my feedback-post. Would be great if this post is reachable through the web from other (pre windows
10) machines.
Answer: The ability to reply to the feedback-"post". like "it's solved now", "it does not work with build xxxxx", "i can't reproduce", "we're working on a bugfix"

Jakarta Commons -- File Upload does not work with Application Server

Hi ALl,
I tried Jakarta Commons file upload. In the netbeans, I copied the common jar files "commons-io-1.2.jar" and "commons-fileupload-1.1.1.jar" in the
netbeans-5.5\enterprise3\apache-tomcat-5.5.17\common\lib and set the class paths. It is working correctly when I compile and run from the netbeans. However, when I deployed in Sun Application Server PE 9.0, I am receiving the following errors. In Sun application I copied the above jars files to "C:\Sun\AppServer\jdk\jre\lib\ext"..
I have read in several postings that it does not work this way but could find any solution. Any idea will be greatly appreciated.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: java.lang.NoClassDefFoundError: javax/servlet/ServletInputStream
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:930)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:863)
     org.apache.jsp.fileUpload_jsp._jspService(fileUpload_jsp.java:109)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:353)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:409)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:317)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
root cause
java.lang.NoClassDefFoundError: javax/servlet/ServletInputStream
     org.apache.commons.fileupload.servlet.ServletFileUpload.parseRequest(ServletFileUpload.java:116)
     org.apache.jsp.fileUpload_jsp._jspService(fileUpload_jsp.java:76)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:353)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:409)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:317)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
note The full stack trace of the root cause is available in the Sun Java System Application Server Platform Edition 9.0 logs.
Sun Java System Application Server Platform Edition 9.0
Thank you,
--Sam

Hi All,
I solved this few minutes after I posted this question. Thought I should share with everybody, just in case some one else need it.
I copied these three files in the folder C:\Sun\AppServer\jdk\jre\lib\ext
1. servelet-api.jar
2. commons-io-1.2.jar
3. commons-fileupload-1.1.1.jar
No need to set any class path.
Thanks

TableView : sort = "SERVER" ...does not work for "TIME"

Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
Bindiya

Welcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja

Remote video streaming not working with Windows Server Essentials Media Pack

I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?

Hi,
What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
Manage Digital Media in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj628151.aspx
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

BMR/Systemstate backup not working on windows server 2008 error 2147942487

Hi, trying to backup system image using SCDPM 2010 RTM.Most of the server are getting healthy backups except for this one server which is giving error:
Affected area: Computer\System Protection
Occurred since: 1/27/2014 2:43:27 PM
Description: The replica of System Protection Computer\System Protection on server.DOMAIN.COM is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x80070057). (ID 30229 Details: Internal error code: 0x809909FB)
More information
Recommended action: For resolution actions and more information on the WSB error, go to http://technet.microsoft.com/en-us/library/cc734488(WS.10).aspx.
Synchronize with consistency check.
Run a synchronization job with consistency check...
Resolution: To dismiss the alert, click below
Inactivate alert
On the server, event viewer show the following events:
1. Backup Log:
Backup started at '2014-01-27T11:26:21.356950100Z' failed with following error code '2147942487'.
2. Application Log:
The description for Event ID 517 from source Microsoft-Windows-Backup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
27-Jan-14 11:26:21 AM
2147942487
%%2147942487
The resource loader failed to find MUI file
However, when I observe the backup process using "wbadmin get status", it reaches 99% then stops.
Running backup of volume Local Disk(C:), copied (97%).
Running backup of volume Local Disk(C:), copied (98%).
Running backup of volume Local Disk(C:), copied (99%).
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The parameter is incorrect.
The server hardware is HP blade with two disk which are mirrored, and has 12 GB free space. below is the output from systeminfo command:
Host Name: server
OS Name: Microsoftr Windows Serverr 2008 Enterprise
OS Version: 6.0.6002 Service Pack 2 Build 6002
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Admin
Registered Organization: -
Product ID: 55041-339-7818202-76771
Original Install Date: 04-Aug-08, 3:15:18 PM
System Boot Time: 21-Jan-14, 3:58:47 PM
System Manufacturer: HP
System Model: ProLiant BL460c G1
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
[02]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
BIOS Version: HP I15, 02-May-11
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (GMT+03:00) Kuwait, Riyadh
Total Physical Memory: 16,381 MB
Available Physical Memory: 8,320 MB
Virtual Memory: Max Size: 21,821 MB
Virtual Memory: Available: 13,722 MB
Virtual Memory: In Use: 8,099 MB
Page File Location(s): C:\pagefile.sys
Domain: DOMAIN.COM
Logon Server: N/A
Hotfix(s): 157 Hotfix(s) Installed.
[01]: {47740627-D81D-4A45-A215-03B075A18EC7}
[02]: {3D019598-7B59-447A-80AE-815B703B84FF}
[03]: {A8E86480-A9C1-4414-8AA2-B05A485C82F0}
[04]: {C444285D-5E4F-48A4-91DD-47AAAA68E92D}
[05]: {DB33A524-845E-4855-9E90-A5619BCDD527}
[06]: {ECC3A660-90E3-4A89-9FE8-F8B3C633B12E}
[07]: {65AFCB03-3111-47E2-B1ED-198D6B0BC96E}
[08]: {F5E29D9D-519A-36C7-87E3-9A22A8180B1B}
[09]: KB971513
[10]: KB971512
[11]: 944036
[12]: 982861
[13]: KB960362
[14]: KB2079403
[15]: KB2117917
[16]: KB2141007
[17]: KB2160329
[18]: KB2183461
[19]: KB2207566
[20]: KB2286198
[21]: KB2296011
[22]: KB2296199
[23]: KB2305420
[24]: KB2345886
[25]: KB2347290
[26]: KB2387149
[27]: KB2388210
[28]: KB2416400
[29]: KB2416470
[30]: KB2419640
[31]: KB2423089
[32]: KB2436673
[33]: KB2442962
[34]: KB2443685
[35]: KB2447568
[36]: KB2467659
[37]: KB938464
[38]: KB942288
[39]: KB948609
[40]: KB948610
[41]: KB949189
[42]: KB950762
[43]: KB950974
[44]: KB951066
[45]: KB951698
[46]: KB951978
[47]: KB952004
[48]: KB952287
[49]: KB953733
[50]: KB954155
[51]: KB954459
[52]: KB955020
[53]: KB955069
[54]: KB955302
[55]: KB955430
[56]: KB955839
[57]: KB956250
[58]: KB956572
[59]: KB956744
[60]: KB956802
[61]: KB957097
[62]: KB957200
[63]: KB957321
[64]: KB957388
[65]: KB958481
[66]: KB958483
[67]: KB958623
[68]: KB958624
[69]: KB958644
[70]: KB958687
[71]: KB959130
[72]: KB959426
[73]: KB960225
[74]: KB960803
[75]: KB961371
[76]: KB961501
[77]: KB967190
[78]: KB967723
[79]: KB968389
[80]: KB968537
[81]: KB969058
[82]: KB969897
[83]: KB969897
[84]: KB969947
[85]: KB970238
[86]: KB970430
[87]: KB970653
[88]: KB971468
[89]: KB971486
[90]: KB971557
[91]: KB971657
[92]: KB971737
[93]: KB971930
[94]: KB971961
[95]: KB972036
[96]: KB972270
[97]: KB972636
[98]: KB973346
[99]: KB973507
[100]: KB973525
[101]: KB973565
[102]: KB973687
[103]: KB973917
[104]: KB974145
[105]: KB974318
[106]: KB974455
[107]: KB974470
[108]: KB974571
[109]: KB975364
[110]: KB975467
[111]: KB975517
[112]: KB975560
[113]: KB975759
[114]: KB975929
[115]: KB976098
[116]: KB976264
[117]: KB976470
[118]: KB976662
[119]: KB976749
[120]: KB976768
[121]: KB976772
[122]: KB977165
[123]: KB978251
[124]: KB978262
[125]: KB978542
[126]: KB978601
[127]: KB978886
[128]: KB979099
[129]: KB979306
[130]: KB979309
[131]: KB979482
[132]: KB979687
[133]: KB979688
[134]: KB979899
[135]: KB979910
[136]: KB980182
[137]: KB980195
[138]: KB980218
[139]: KB980232
[140]: KB980248
[141]: KB980302
[142]: KB980436
[143]: KB980842
[144]: KB981322
[145]: KB981332
[146]: KB981793
[147]: KB981852
[148]: KB982132
[149]: KB982214
[150]: KB982519
[151]: KB982664
[152]: KB982666
[153]: KB982799
[154]: KB983589
[155]: KB948465
[156]: KB960568
[157]: KB968930
Network Card(s): 1 NIC(s) Installed.
[01]: HP NC373i Multifunction Gigabit Server Adapter
Connection Name: Local Area Connection 2
DHCP Enabled: No
IP address(es)
[01]: x.x.x.x
[02]: fe80::f494:43c2:7d90:e774
Hyper-V Requirements: VM Monitor Mode Extensions: No
Virtualization Enabled In Firmware: No
Second Level Address Translation: No
Data Execution Prevention Available: No
Things I have tried:
1. I tried to backup manually to external HDD using wsb snap-in, but it has failed in the same way.
2. Stop and re-add protection.
3. I have researched the error, some results suggest that some bad sectors might exist, however, when I run the command, it forces me to schedule the command on next boot. when I reboot, it loads windows after that gives a message "Cannot open the volume
for direct access"
How to end this loop? please help. Thanks for considering my question ...

Hello Ebttikar,
Please try clean boot then test how the issue goes. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if RDP session issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problem Windows 8 logon script not working from windows server 2008 R2

hi there , this is third post regard this problem, here is my problem goes .....
Is a very simple logon script for mapping drive purpose .... PLS take note Domain users can access and run this script for domain users using windows XP / WINDOWS VISTA / WINDOSWS 7 and only users " WINDOWS 8.1 " Does NOT run
at all . the script I put on logon script in Windows server 2008R2 group policy ...
@jrv :- http://social.technet.microsoft.com/profile/jrv/?ws=usercard-mini , insist said is my group policy setup problem so I post here agn...
Manually run the script on WINDOWS 8.1 is 100 % perfect so it is definitely not my logon script issue , PLS any guidance pls share for me ok ?? thanks
Below is my script syntax ;-
@echo off
REM Login.bat Version 1.0
REM Exit if user has logged on to the Server
IF %COMPUTERNAME%.==SL2011. GOTO END
REM Delete pre-existing drive mappings
REM
REM Map M: to SL2011 on sl2011
NET USE M: /DELETE >nul
NET USE M: \\SL2011\sl2011 /YES >nul
REM
REM Map Y: to AccScan on rss2
NET USE Y: /DELETE >nul
NET USE Y: \\rss2\Public\AccScan /YES >nul
REM

Hi Tee Ee Foong,
According to your post, the gpresult showed the GPO was applied and the script could run successfullymanully in the client. Right? Please follow the following step to narrow down
the issue:
1. Change the script to the following command: add
> %SystemDrive%\Users\test.txt to the script.
2. Log on to a client with a regular user account, run gpupdate/force, and then re-log on to this client.
3. Check if the test.txtfile exists in this location %SystemDrive%\Users.
If the test.txtfile exists, the GPO with logon script is applied successfully when user logs on. But the result of running logon script achieves the goal we excepted or not which
is still not sure.
Regards,
Lany Zhang

OWC not working on windows server 2008

Hi,
I am moving from Windows 2003 to windows 2008 server.
OWC components are working fine for my applications in windows 2003 where it is failing in windows 2008.
we are getting Authentication issues in the application.
Application is asking for windows login credentials after navigating few screens.
Its failing even after giving credentials also.
Can some one please help us on this.

Hello Girish,
OWC is not supported any longer. See Office Web Components “Roadmap” and
Description of the versions and support for Office Web Components (OWC) for more information.
You may find the
Replacing OWC Reporting with Excel Services article helpful.

Email Notification Script is Not Working in Windows Server 2012..

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

Similar Messages

Maybe you are looking for