Group Compilations not working - Pain!!!!

Hey.
Ok, i've gone through my entire library sorting out all the info and stuff like that to make my iTuning more enjoyable.
One thing is Griping me though. I have many compilations. I have them all check as "part of compilation" and even gone to the extent of naming all the album Artist as "Various Artists" But in the library I do not see the "compilation Grouping.
I get all artists listed alphibetically, which is really annoying. I presume the whole point of having a "group compilations" preference is so that it groups them, so whats going wrong>?
I browse my library in coverflow btw. And am using the new Itunes update...
If anyone can shed light on my problem I would be very greatful.
Thanks
Jed

If you're sorting by Artist, iTunes does exactly that — sorts by Artist, regardless of the Compilation checkbox. You need to sort by Album to get the compilations grouped together. Use "Album by Artist" to sort by Compilation status, then Artist, then Album; or use "Album by Year" to sort by Compilation status, then Artist, then Year, then Album.
This makes sense, if you think about it; the "Compilation" label is applied to albums, not artists, so it's only when sorting by album that compilations are pulled out.

Similar Messages

IOS Group Messaging not working when Android phones are involved

Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

Hey geoff_zen,
Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Group chat not working on Mac

Suddenly stopped working, but personal messages works. Had to login via skype for web and that's where I saw that I had tons of group messages. Tried updating Skype to latest version (7.10), restarted several times, to no avail. Group Chat is still dead.

The same here. Group chats not working, and some 2-person chats not working too.

Groups does not work in Mail under Mavericks

Its not just smart groups, by I cannot get any of my Groups to work with Mail under Mavericks. I am weary of having to type out the address for each person separately. Is there some better way?

I don't know why typing he name of a regular group does not work for you, but…
Another way is to open the address panel, select a group, then select all in the group, then click the two button.

Lync 2013 Group Chat not working

We have a 2010 server and when I move people over to 2013 group chat does not work. I can select the people I want to talk to, but they don't see any of the conversations. When I move the back to the 2010 it works again.
We are running office 2013, lync 2013 and exchange 2010.
Any suggestions?

Have you installed Persistent Chat in Lync 2013? You'll need to migrate the group chat data to the Persistent Chat pool and setup a Persistent Chat Endpoint for the legacy 2010 group chat clients, see: http://technet.microsoft.com/en-us/library/jj204901.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Group Messages Not Working between Android and iPhone Users on iOS7

Hi there,
I am a former iPhone user. I recently converted both my line and my wife's line from the IPhone 5 to a Motorola X Android phone. We kept our same phone numbers, but we completely switched from Verizon to AT&T. I have noticed that text messaging works perfectly on an individual basis when I correspond with individuals who have the iPhone, but Group Messaging is not working correctly. I am able to send messages to a group and they receive them just fine, but when they respond back to me, I do not receive their responses (as it appears they are going through as iMessages). My wife is having the same issue on her phone. After doing some detective work, I have found that hundreds of other users are having the same issues on their smartphones when they make the switch from an Apple product to an Android phone. There are a variety of "bug fixes" listed on the web, but I have completed all of them and I am still having the same issue. Here is what I have done so far...
*Factory reset both of our phones and removed the SIM cards (since we are with a new phone carrier)
*Changed both of our apple ID passwords
*Removed both of our phone numbers from Apple's database all together
*Unregistered both of our iPhone products with Apple
*Had all of my friends/family switch SMS to "On" in their Settings tab
So now what? I read one post on an Apple forum that said that they are aware of the issue and we can expect a fix in a future iOS update...but when is that going to occur, if at all? It is problems like these that led me to leave Apple all together, and here I am after having left the company, and I am still left high and dry searching for solutions to my problems. Who can help, and how can I remedy the situation?
Anything you can provide to help out would be great.
Thanks.

There are reports of iOS7 altering the settings on iMessage's connection to the iPhone. Verify that each of the iPhone and the Mac is receiving on the "channel" (phone number or email address) on which the other is initiating iMessages.

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 2008 Group Policy not working in Windows 8.1

Hi ,
We found that the GPO settings created in Windows 2008 is not working in a Windows 8.1 machine.
One example is the proxy settings.
We confirmed from gpresult that the GPO is in the list but checking the actual proxy settings, it is not applied.
Regards,
Jhun

Hi,
How did we configure the proxy settings, using Internet Explorer Maintenance? If it is this case, just as Martin suggested, we can’t use IEM to manage
IE 10 and IE 11. However, we can configure the proxy setting via Group Policy Preferences (GPP).
Regarding this point, the following blog can be referred to for more information.
Configuring Internet Explorer 10′s
Proxy Via Group Policy
http://johnfail.wordpress.com/2013/06/15/configuring-internet-explorer-10s-proxy-via-group-policy/
In addition, when we use this GPP extension, pay attention to GPP F5-F8 keys.
Regarding this point, the following blog can be referred to for more information.
Group Policy Preferences F5 F6 F7 F8 “documentation”
http://msitpros.com/?p=1014
Please Note: Since the above two websites are not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
of this information.
In addition, regarding the deprecation of IEM, the following article can be referred to for more information.
Appendix B: Replacements for Internet Explorer Maintenance
http://technet.microsoft.com/en-us/library/jj890998.aspx
Best regards,
Frank Shen

Group Message not working iPhone 6/ iOS 8

I am not able to receive group messages after I updated to iOS 8.0.2 I just activated my iPhone 6 about 3 weeks ago (Before the Apple pay update). It was working fine until I updated the software with the Apple Pay. Initially I thought ALL the group messages are not working. After few trials I realized it was only the case when the group included both iPhone and non-iPhone users. Groups with ALL iPhone users is working fine.
I have checked everything possible, but nothing works.
- Turned off-on iMessages
- Turned off-on Group messages
- Reset Network Setting
- Erased and Reset the Entire phone from Phone settings (Now operating on iOS8.1)- still not working
- Called my carrier and they didn't seem to understand why I was having this problem
I then spoke with Apple Support who ran few diagnostic tests and they didn't find anything. They suggested that I re-set the phone to brand new phone (with out iCloud back-up) via iTunes (not from phone settings) and see if that will fix this. I will try this later tonight and see if I have any luck.
I tried telling customer service that I want to return my phone and get a new one- but they seemed to keep me away from that option.
Has anyone else experienced this? If so, any suggestions?

Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support
iOS: Troubleshooting Messages - Apple Support

IMessage iOS 8 "Leave group Conversation" not working

I've been trying to use the "Leave group Conversation" feature of the "Details" page of iMessage in iOS 8, and I cannot get it to work. I've reset my network settings, logged in and out of iCloud, and restarted the phone. No luck.
Is anyone else having the same problem?
thanks,
J.

I read that everyone in the group messaging has to have iMessaging and their phone has to be updated to iSO 8. Oh it has to be 4 or more people in the group. Which really does not work for me because everyone in my contacts does not have an iPhone!
There are a few things to note with this feature however, leaving a conversation in Messages only works when all of those in the message thread are using iMessage – if it’s a group SMS, say there’s an Android user in the thread as well, you’re out of luck and can’t leave the chat. Keep that in mind if the texts keep popping up.

Individual iMessage ok but group message not working

I am suddenly having problems with iMessage. I can send individual messages but when I try to send a group message, it just hangs and the message eventually completely disappears from my message history. This is both for new conversations and existing conversations. It makes no sense. Help!!!

CORRECTION:
Mms is not working despite it being on. Friends ARE NOT receiving group messages and I can't send mms to anyone individually.
Sorry for the confusion. Confused some details between the old 3GS and this 4S

Switch tab groups shortcut not working on cyrilic keyboard

The "switch tab groups" shortcut, which is Ctrl+` is not working when I use cyrilic layout, because the ` corresponds to ч. Is there a way to make it always use the ` key no matter of the keyboard layout (the way Ctrl+C and Ctrl+V shortcuts work on Windows)

go to system preferences->keyboard->keyboard shortcuts->keyboard and text input and redefine this shortcut. I don't know what it's called in Italian but in English the shortcut is "move focus to next window in application".

Language specific replication of material group description not working SRM

Hi All,
We have backend R/3 MM system from which we replicate our materials,material groups. For Italian language the replication of the material groups description is not working. Though the description is available in backend R/3 system when i run the DNL_CUST_PROD1object in R3AS tcode, there is no replication log in SMQ2 but still the Italian language is not replicated into SRM.
There are no logs in SMW01 tcode also.
Please suggest.
Best regards,
Sam

Hi,
As david explained,you need to set the filter for the LANGUAGE field in trascn R3AC3 before replicating the product categories.
In R3AC3 select DNL_CUST_PROD1. Go to table structures tab . Click on the filter next to T023T table. This will take you to the filter tab. Select source site name and filter options. In the field put "SPRAS", in op put "EQ" and in low value the value 'IT"(for italian) . You can also describe a range here instead of individual material group numbers.
BR,
Disha.
Do reward points for useful answers.

Video Group call not working

Hello! I have recently purchased a laptop with Windows 8.1 with pre-installed Skype application. When When I video-call a single person, everything is working normally, and I am able to see the other person. However, when making a group call, I am the only one that cannot see neither of the parties, though I am able to hear them. I do have the latest Skype application. Also, I cannot recieve pictures. Where is the problem?
Solved!
Go to Solution.

Hi there, I am having a similar problem. When I make group video calls (on my PC with Windows 8.1), the people on macs or iphones can only be heard but not seen. And I get a message on my screen that says something like their version doesn't support group video? But I've done everything the forums says:
1) they have the latest iPhone and just downloaded Skype which is the newest version (no older versions here)
2) I'm the one hosting the call, so they're just joining in (because I know iPhone can't host, but they're supposed to be able to join group video chats).
3) I've added their name to my contacts list and dragged their contact into the group call box to initiate the call (so they're not joining in later, they're there at the start of the call).
4) And we tested prior to the group call to make sure that one-on-one video calling is working.
5) Everyone else on the call who are on a PC has the group video chat working fine.
6) Only calling with 3-4 people in a group.
What am I missing? Please help.

Group calls not working

For the last 2 days, group call feature does not work at all. I use this feature every day for my work.. I must have it.
When I add the 2nd caller to the call, it will not dial out if it is a POT, or it will not connect if it is a SKYPE user online.
If I create a group call prior to connecting, the button to initiate the call does not function.
I unstalled skype, delete the app directory, and reinstalled skype.
It still does work.
I am running windows 7 professional 64 bit on a dual processor with 8 GB RAM.

Hi, this morning I noticed my bluetooth radio was on.
I turned it off.
That didn't work.
I went to another machine and signed on there (Windows 7 home premium, QUAD 8 GB). That machine was running 7.3. It allowed the group calls.
I signed out and went back to the first machine running 7.4. It now works!
Hopefully this is resolved.

Group Compilations not working - Pain!!!!

Similar Messages

Maybe you are looking for