Group delivery for BOM's when one of the BOM component has no confirmed qua

Hi,
We have an issue. We have group delivery for BOMs. However it might be in some cases that one of the component has no confirmed quantity. Still we do not want delivery for any of the component to be created. What is the easiest way to achive this?
thanks in advance.
regards Camilla

Hi Camilla,
In VOV7 for the item category of main item Create Delivery Group must be assigned a value X (Form delivery group with one delivery date). If you have this configuration set-up done system will  assign one delivery group for the entire group of BOM materials and all will be delivered on the same date. Can you check this?

Similar Messages

  • A site I need for consulting purposes requires an add-on known as "Intranet for Firefox". When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site.

    A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.

    http://www.aegtelecom.com.pt/contactos <br />
    Have you tried contacting that web site's support department for help with that issue? <br />
    If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
    Or you can try using IE Tab2 to run IE in a Firefox tab. <br />
    https://addons.mozilla.org/en-US/firefox/addon/92382

  • For some reason , when i access the cloud , it has duplicated a playlist over and over , with no songs in it and i cannot remove it , can you help ?

    for some reason , when i access the cloud , it has duplicated a playlist over and over , with no songs in it and i cannot remove it , can you help ?

    This post will sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

  • We have multiple devices in our family.  On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes.  When one of my kids comments on my shared photostream, it shows my name??

    We have multiple devices in our family.  On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes.  When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter.  How do I fix that?

    CREATE A NEW USER
    Go to System Preferences --> Create a New User in Users & Groups
    Decide on whether to setup as Admin or Standard User.
    Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
    Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.

  • I was using my old iPhone 4 as an iPod for 4  months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

    I was using my old iPhone 4 as an iPod for 4  months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

    Nope. I've already turned off cellular data. It happens regardless, as soon as it is done powering on.
    I suspect it might just be built into the phone's firmware to do that... and I have to hit "ignore" whenever it happens, but I just wanted confirmation of that...

  • I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
    https://forums.adobe.com/community/premiere_elements
    When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one.  Then save the file.  If you move the files again, you will have to relink them again.

  • I,m looking for handsfree for iphone 4s, which one is the best for it

    i,m looking for handsfree for iphone 4s, which one is the best for it

    I really like the Plantronics Voyager Pro bluetooth headset.  I have tried a lot of the ones on the market and the Plantronics one that I now use has - a long battery life, excellent sound quality and very low background noise. I occasionally use it when in a vehicle (although I do try to avoid doing this) and people on the other end of the line don't even realise that I am in a car.

  • Error when I change the BOM without a change number

    Hi,
    I would like to receive an Error when I change the BOM without a change number.
    I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
    In change the message type I don’t have the really message number in the liste.
    How can I create a new message (045) so that I get an error by changing the BOM without a change number.
    Thanks

    Dear Dede,
    check for the Authorization Object C_STUE_NOH for the
    particular User Id's for which you want to Create or Change a
    BOM without a Change number.
    So assign this Authorization Object under all user id's for which
    you want to have this control.
    Adding the mentioned Authorization Object in particular User
    Id's will resolve the problem.
    This can be done using PFCG T code by adding in particular
    Roles.
    Revert back incase of any clarifications.
    Regards
    Mangalraj.S

  • HT204053 I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

    I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

    While I have a few ideas, I think you'd have better luck troubleshooting this in the iCloud forum.

  • I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
    You can read bout it here.
    http://support.apple.com/kb/ht1414
    If that does not work you will need recovery mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

    Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
    Please help

    It is a folder which I have created. Name is "SAP".
    I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
    This is happening after the Mavericks update.

  • I would like to go for older version of one of the app ( snipsnap ). previously i used to have in my iphone but during synching i did not got option to transfer apps to library so i lost all my apps. how can i get snipsnap v1.3 again?

    i would like to go for older version of one of the app ( snipsnap ). previously i used to have in my iphone but during synching i did not got option to transfer apps to library so i lost all my apps. how can i get snipsnap v1.3 again? or if anyone have link to this older version app please let me know. thanks.

    You appear to have an iPhone 5. Snipsnap 2.4.2, the current version, says it works on iPhone 5, iOS 5.0 or later. Why do you want an out of date version of the app?

  • Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

    Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

    The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
    If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
    http://support.apple.com/kb/HT1212

  • Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

    Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

    Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
    Interchange Interactive Whiteboard Software System Requirements
    Please note: These discs work on Windows PCs only.
    Minimum System Requirements
    Pentium II 300 MHz processor
    Windows 98 / ME / 2000 / XP / Vista
    64 MB RAM
    50 MB free disk space if not installing onto hard disk
    1.44 GB free disk space if installing (recommended)
    4x CD-ROM drive
    800 x 600 screen resolution displaying 16-bit color
    Sound Blaster compatible sound card
    Mouse or other pointing device
    Headphones or speakers

  • I want the title on the browser to change when one of the frames changes in the Frameset.

    I am using frames (please don't tell me off!) and PHP.
    I want the title on the browser to change when one of the
    frames changes in the Frameset.
    Normally the title of the browser comes from the Frameset,
    But I am sure I have seen websites where the title changes
    depending on one of the frames... how is this done?
    C

    Then don't use frames.
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    Show us one and we'll tell you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "colinwalton" <[email protected]> wrote in
    message
    news:epuu1t$kgv$[email protected]..
    >I am using frames (please don't tell me off!) and PHP.
    >
    > I want the title on the browser to change when one of
    the frames changes
    > in
    > the Frameset.
    >
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    >
    > C
    >

Maybe you are looking for