Group ID is different across the node during 11203 RAC upgrade

Hi,
DBA is the primary group in all the 3 nodes but with different group ids. cluvrfy shows as the ids are different across the nodes.
Different group ids on 3 nodes will cause any problem during the upgrade ? Please let know I got stuck up in mid of the upgrade.
Thanks,
NR

oinstall , the oracle inventory group should be the primary group for oracle (and grid user if you are uing role separation )
Yes , group ID and user IDs must be same across all nodes. This was a pre-requisite even for 10.2 Cluster Installation.

Similar Messages

Apps 10g singale node to 10g RAC upgrade

Hi Friends,
I am planing to upgrade my Apps 10g singale node to 10g RAC. If you have any good document for this please share with me.

Pl identify exact OS, database and EBS versions. Pl see these MOS Docs
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]
Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]
HTH
Srini

Common memory place across the cluster nodes

Hi All,
I am a websphere application server v6.1 user. I am running an application that uses a HashMap to store common information in the form of key value pairs. The application works fine in a single server environment but the same application fails in a cluster environment. This happens because the HashMap information will not be available for the cluster environment nodes which were running on a different JVM�s.
Could anybody suggest a good design where in I can use a common place to store the HashMap information like queue, database or any common memory area which is available across the cluster nodes? I am not really familiar with the memory facilities offered by websphere server. (The use of a central database is the worst case I prefer as the application makes several calls to the database resulting in a deadlock and 100% CPU utilization)
And also the values to the HashMap were added dynamically so the memory place should allow me to add my values dynamically during the runtime.
Please suggest is there any other way or any links to refer to achieve the above situation.
Thanks in advance
-Sandeep
Message was edited by:
km-sandeep

For a similar scenario we maintain a version flag in the DB based on which we would reload the hashmap.I'm too interested in finding out a design without DB.

[svn:fx-trunk] 10459: Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking , etc.

Revision: 10459
Author:   [email protected]
Date:     2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
Log Message:
Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
Improving revision 10199 a bit, to allow for single line comments.
QE notes: None
Doc notes: None
Bugs: SDK-22027
Reviewer: Paul
Tests run: Checking, Compiler cyclones
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22027
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How do I get the Home, Reload and Forward/Backward buttons grouped logically together, rather than splattered randomly across the top of the browser ?

In Firefox 3, all the buttons are grouped together, in V4 they are now scattered across the top of the browser, aping IE7/8 - plus the "stop loading" button has gone walkabout - it would be useful to get that back, as well.

You can open the Customize window to make it possible to change the position of those toolbar buttons.
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />
* Drag the Home button from its current position at the right to the previous position at the left of the location bar.
* Drag the Reload and Stop buttons to their previous position at the left side of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
See also:
* http://kb.mozillazine.org/Toolbar_customization

Why is the menu structure different for different OS environments? What would it take to make them the same across the board?

The questions in the title pretty well say it all. Each version of the program works differently and wondering what it would take to standardized them for being the same across the board. Menu items are in different locations depending on what OS you are using. Putting the cursors in the URL line works differently from one OS to the next. It would be nice to create an equal standard for working under all OS types.

Firefox follows the convention for each OS as to where it places and what it calls menu items. The most noticeable is the Options/Preferences dialog.

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How can I find the node I am dragging over during MouseDragged ?

It seems that while dragging you only get MouseDragged events on the node where the drag originated. I have a situation where a drag starts on one node and ends on another.. I am having a lot of trouble finding a reasonable way to get the node where the drag leads to.
E.g. imagine a UI where I am dragging a "connection" from one node to another. I can't use Drag and Drop (which otherwise would report DragEntered andDragExited events), because during a Drag and Drop I don't get any MouseMoved or MouseDragged events, so I can't draw my connection line interactively.
I was hoping I could get MouseEntered and Exited events somehow during the MouseDrag, but they aren't delivered, and even attaching an EventFilter to the nodes in question didn't work. During the drag all events are reported on the listener registed with the source of the drag, but in the drag event even the event Target is set to the same value as the event Source, regardless of what the mouse is dragged over during the operation.
If there is no way to get the need events, is there a built-in way to get the "deepest" node in a scene given the scene coordinates?
Thanks,
Scott

Thanks for the response.
I really think that having target nodes involved with the press-drag-release gesture is important. It seems broken the way it is now. As soon as a drag of any sort begins (MouseDragged, or Drag-and-Drop) suddenly a lot of useful information is unavailable. Why not set the target of the MouseDragged event to what the mouse is actually over? Currently, one the drag is initiated the source and target are fixed forever and no other events are available to find what the mouse is hovering over. (Hmm.. I should check if even the "hover" state is changed on components,as I want my CSS to indicate that a node is the intended destination of the connection that I'm dragging)
The other ugly bit is that now I have to get other objects involved in the operation, whereas before I could just attach event handlers to my nodes, now I need to have a parent involved just so I can see where the mouse is going. I also need to deal with the mouse cursor, which will be giving the user bad feedback, that a drag and drop is happening, when that's not really the concept that I want to convey.

Prior to upgrading to 9.5, I used to be able to open several different PDF's in one Adobe Reader. Each document would have it's own tab across the toolbar. Now I don't have that open. Instead, I have multiple Adobe Readers open at the bottom of my scre

Prior to upgrading to 9.5, I used to be able to open several different PDF's in one Adobe Reader. Each document would have it's own tab across the toolbar. Now I don't have that open. Instead, I have multiple Adobe Readers open at the bottom of my screen. Any suggestions on how to change that? Thanks!

Not possible with the actual versions of Adobe Reader.

Different databse tables affected during the creation of a PR

Can someone please explain the different databse tables affected during the creation of a Purchase Requisition except EBAN?

Hi Ajit,
Thanks for the reply.
Kindly let me know how these tables will be affected when PR will be created(STXH,STXL)?
Thanks,
Lina

Will the Application Scope be shared across the cluster in a multi-node OC4

Hi,
I have the following requirement:
Users of the application can only have single (browser) session. When a user who already has a session connects again, he should no longer be allowed to access the older session.
My proposed implementation is:
- After successful login – possibly using a Session Listener - an entry is made in a HashMap UserSessions that lives in the application scope. Key is the username, value is the session id (HttpSession.getId()).
- For every request, using a ServletFilter, we check whether the session is still in the UserSessions HashMap for the current user. If a new session has been created for the same user, the session id for that new session is in the UserSessions map and the servletfilter will not find the session. In that case, the filter should invalidate the session and forward to the user to an error page.
However, the application will run on a multi-node OC4J cluster. I am starting to wonder:
Will the Application Scope be shared across the cluster in a multi-node OC4J environment?
I know session state can be shared. But what application state/scope?
Does anyone know? Do I have to do anything special in the cluster or the application to get this to work?
Thanks for your help.
Lucas

gday Lucas --
Application scope is not replicated across JVM boundaries with OC4J.
I'm sure this used to be described in the doc, but I can't find it now from a quick scan.
If you wanted to use this type of pattern, you could look to use a Coherence cache as distribution mechanism to share objects across multiple JVMs/nodes.
-steve-

Is there any way to sort the alarms differently in the Clock app? I have alarms for multiple days during the week, all of which overlap each other. It makes no sense to me that the alarms sort by time and not day. Thanks!

Is there any way to sort the alarms differently in the Clock app? I have alarms for multiple days during the week, all of which overlap each other. It makes no sense to me that the alarms sort by time and not day.

No, there is no way to change the sort order.
Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

HT201263 Hi. My Ipod Touch switched off in the gym during exercise. I tried all the troubleshooting hints but nothing helps. It is not responding and I tried to charge in various ways by different cables and computers and all is in vain. Can anyone help p

Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?

If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on

Imported Photos keep freezing during a motion path across the screen

Today is the first day I am using Motion since upgrading to Leopard about a month ago. I am working on a project where I have various photo images floating around or across the screen. For some reason, I keep getting hiccups when the image moves across the screen. It moves, then pauses for a second or two then continues on. I scaled the image down, added a motion path and a Fade in/Fade out behavior and that is it.
I am not sure if it is a Leopard thing or something I need to adjust in the parameters but I have used Motion plenty of times before the upgrade and it never paused in the middle of move. Its annoying pause. At first I thought it kept hitting a spot on the timeline that needed to be rendered but I keep looping the timeline and it keeps pausing at the spots. Not every picture does this either.
I have enough memory to run the whole Final Cut Studio with no problem so I am still not sure what is up. I may just export it and see if it corrects itself.
Any suggestions you all may have will be appreciated.
C.

In the Motion manual or tutorial or something from Apple, they tell you to put one of the Glow filters on a clip, saying that no system could play it back full speed. So you have enough to run the programs, but that doesn't mean you have real time playback.
Here's a tip- right click the bar right below the toolbar, and check "Frame Rate" in the menu. Now, when you play back your video, it will tell you how many frames per second it is playing back. It will play every frame (this is not how FCP works).
So if you aren't getting smooth playback, RENDER! Then you can see how it will play when exported.

Group ID is different across the node during 11203 RAC upgrade

Similar Messages

Maybe you are looking for