Group information lost after NW7.0 restart

hi,
I have created some groups in the netweaver 7 user user managerment console.
and added some users to the groups,
but when i restart the server ,the users is lost ,the groups come to empty.
what's reason for this .
how to resolve it.
thanks

Hi,
check with ldap guy.may be they did some changes .
Users and groups not displayed means ldap and portal conenction not working or ldap server is down or it has some issues.
Regards,
Koti Reddy

Similar Messages

JMS Messages lost after server restart

Hi All,
We have an environment where Oracle SOA 11g is configured to use Weblogic JMS (Database persistence). The JDBC stores have been created to hold the persistent JMS messages. However we have observed that after server restart the messages are getting lost from the queue (non consumed messages as well).
Is there any configuration which we are missing?
Regards
Subhankar

Hello Subhankar,
Which Weblogic version are you using? What are the configuration parameters of the JMS queue you defined? During server shutdown/restart, do you see any errors in the server log?
I would suggest you to raise a case with support as it may require an inspection of your environment and settings to find out the root cause.
Regards,
Anuj

My groups are lost after I create them and shut down and restart.. Very frustrating.

I create the tab groups during a session on my Imac desktop with 10.6 osx and firefox 4.0 but they are lost everytime I close and restart..

Hi jennyoutwest,
Welcome to the Support Communities!
The following articles will provide some troubleshooting steps for your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
The final troubleshooting step would be to restore your device:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
Cheers,
- Judy

Content Lost after Portal restart

Hi Guys,
i have installed a EP 7.0 with SPS14. i Created some content (roles, Iviews, Themese etc.) But after restarting the portal everything is lost. Also i deployed SPS 16 after restart components are on SPS 14 again.
Did someone ever noticed such a behaviour?
best regards,
Kai

hi!
Here you go with Release notes for nw2004~
http://help.sap.com/saphelp_nw04/helpdata/en/44/50c12c97c01193e10000000a155369/frameset.htm
for installation etc - go here-
https://websmp207.sap-ag.de/instguides ->SAP NetWever

SnapDrive transport protocol settings lost after service restart.

Hi everyone,
On one of our SQL Servers we have SnapDrive v.6.4.2, OS is Windows Server 2008 SP2, the server is in a workgroup, not in a AD Domain.
In SnapDrive transport protocol settings we have a storage system defined and everything works fine, but after restarting the SnapDrive service (mostly because of a server restart) the storage settings disappear (the storage system is no longer defined) and SnapDrive cannot see the VMDK LUNs, therefore SnapManager cannot take SQL Server backups.
Any help or suggestions regarding a solution to this problem will be greatly appreciated.
Regards,
Sezgin

I am experiencing the same issue and the OS is Windows server 2003 SP2. Even after adding the transport protocol settings I dont see LUNs getting displayed.

Wireless keyboard name does not stick, connection lost after reboot/restart

I know this topic has been addressed many times but I might have additional info to this.
I tried to rename my wireless keyboard. The name stays as long as I only let the computer sleep.
As soon as I do a restart/reboot and the connection is lost again, it's name is set back to the old name.
This might be related to the reason why it looses it's connection over and over again.
Does anyone know where this "name" is stored? There must be a plist file or something somewhere where the name is kept, maybe that's the file which is corrupt and must be deleted.
I also was wondering if it is possible to "reboot" the keyboard itself, maybe this setting is stored on the keyboard itself and it cannot properly maintain it.. that might be a reason why for some users the keyboard replacement has helped.
Michael

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

Network savings are lost after system restart

I am new to Unix. I have an Ultra1 170E with Solaris 7. I configured the network with ifconfig hme0 plumb; ifconfig hme0 131.107.x.xxx netmask 255.255.255.0 broadcast 131.107.x.255. However, each time I restart the system it only retains 127.0.0.1. Thanks in advance for your help.

Check the following files:
/etc/hostname.hme0 and /etc/hosts file on your system.
The /etc/hosts file should have the ip address and hostname.
The /etc/hostname.hme0 file should have the ip address of this
machine.
After ensuring the above, reboot the system and it should
show up correctly.
Thanks
-Manish

Nokia 5233 messages lost after phone restart

Hi,
I'm having a weird problem with my nokia 5233. It happened to me twice now that after restarting the device, I would lose all of my messages including messages in my folders and drafts and even sent messages. I have opted to save all my messages in my memory card, which is Kingston 4GB. What might be causing the problem and if I can recover my messages, as I have very important messages in there..........And if there is any solution on preventing this catastrophe again................
Thanks
Iftikhar

This seems to be a common issue with the S60 mobile operating system. No comment from Nokia regarding a resolution so far.
My E75 phone has also experienced the disappearing-messages-act saved in my SD card when my phone restarted from a low battery shut down. Inbox/Draft/Sent Items were completely wiped out.
I tried to change the SMS location from SD Card to Phone Memory then back to SD Card again.
I also tried to (safely & properly) remove the SD Card then reinserted it back. Still no go.
The worst part is that I spent 3 days searching the Internet and found that it's not rare for this problem to occur on an S60 platform yet no resolution from the web nor does Nokia offer any solution to it's customers.
They're about to lose a 12 year loyal and solid Nokia Fan (along with his friends and relatives to migrate to the Blackberry & iPhone Bandwagon) soon if they can't help us retrieve the important messages that was wiped out from our inbox. <sigh>..
Pictures and all other files stored in the SD Card are still intact. It's just my 3,000++ important SMS that's wiped out.

Bookmarks favourites are lost after a restart of computer, why

when I leave Firefox and perform a restart all my favourites that are under the Bookmarks Menu are lost. How do I ensure that they are still available at all times.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Bookmarks_not_saved

Database - information lost after saving and closing.

I have a very simple database. Two text fields and a date field. There are 146 records.
Each text field occasionally contains a lot of characters (isn't 255 the max.?)
If a create another record, put in a date and some text in each text field, then save, close, and reopen the file, the new text is missing from the first text field but the date and other text is intact.
I had this problem two weeks ago. As a work-around, I created another matching database from scratch, exported the records from the corrupt file, and then imported to the new file. The new file functioned well until today.
Any ideas?
Greg

Greg Beil wrote:
Each text field occasionally contains a lot of characters (isn't 255 the max.?)
No, it's 1004 characters per field.
If a create another record, put in a date and some text in each text field, then save, close, and reopen the file, the new text is missing from the first text field but the date and other text is intact.
No idea about this behaviour which I never saw.
May you send the file to my mailbox ?
Click my blue name to get my address.
Yvan KOENIG (VALLAURIS, France) jeudi 4 mars 2010 06:48:30

BUG: Mutitap Preference Lost after Restart

The user's preference for Mutlitap is lost after system restart.
BlackBerry 8130, v4.5.0.77

Verify/repair your disk (not just permissions), in case there is some filesystem corruption, as described here:
The Repair functions of Disk Utility: what's it all about?
This all seems to be caused by downloading the latest Airport update.
You may want to take a look at the following articles for guidelines on how to properly install system updates in case there is something there that applies to you:
Troubleshooting installation and software updates
Installing software updates

I restart my mac air accidentally during reinstallation, after I restart the machine again, I lost all the drives in my computer including win OS. what can I do?

I restart my mac air accidentally during reinstallation, after I restart the machine again, I lost all the drives in my computer including win OS. what can I do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

How to change the replication group information after db files are created

Since group information is persisted in the database, I am wondering if there is a way to update the information.
We want to implement some kind of Berkeley DB master relay mechanism for our two data centers, which has slow link in between. Basically have one master populating a database file and launch another two node as master to replay that to other nodes of its own group. It will be much efficient this way so we don't have to copy the data multiple times over the slow link.
We periodically (once a day) update the Berkeley DB content from customer's feed on a backend node and upload (rsync) the Berkeley DB File to two the data centers. We would like to have a master node in each data center to read the pre-populated data file, replicate the changes to the web node (read only) while they are still running. I simulated local and if I trick the nodeName and nodeHostPort setting, it should work (basically, fake the replication node on the backend node using tampered hostfile so they get registerred). However, it is not very convenient and definitely a dangerous hack on the production servers.
If there is a way, after the creation, to update the group information (for example, change all the nodes information) without corrupt the log file/replication stream, it will be much easier for us. Basically, we would like to have the node/group information and data file de-coupled?
Any ideas how to do that, or is there a better way to design such a replay of data using Berkeley DB?
Thanks in advance!

2. You mentioned to not clean up the log file. Is there a point where I can safely call clean up on the environment when BDB is still online as I can imagine we will run out of space very soon if we don't clean up.The approach outlined above (steps 1 to 5) will ensure that no log files are deleted on A while you are updating B and C. The use of DbBackup ensures this. For more information on how this works, see the DbBackup javadoc.
Whether this causes you to run out of disk space on A is something you'll have to evaluate for yourself. It depends on the write rate on A and how long it takes to do the copy to B and C. If this is a problem, you could make a quick local copy of the environment on A, and then transfer that copy to B/C. But you must prohibit log file deletion during the copy, using DbBackup, or the copy will be invalid.
You should perform explicit JE log cleaning (including a checkpoint) before doing the copy to B/C. This will reduce the number of files that are copied to B/C, and will reduce the likelihood that you'll fill the disk on A. See the javadoc for Environment.cleanLog for details on how to do an explicit log cleaning.
In your earlier post, it sounded like the updates to A were in batch mode -- done all at once at a specific time of day. If so, you can do the copy to B/C after the update to A. In that case, I don't understand why you are afraid of filling the disk on A, since updates would not be occurring during the copy to B/C.
--mark

CVS keyboard accelerators lost after restart

Hi
I set up accelerator keys for CVS edit (F10) and CVS commit (F11). Whilst JDeveloper is running, these keys work fine and I am able to edit and commit with these shortcut keys.
However, when I restart JDeveloper, the settings are lost and I have to set the keys again - (I have to do this each time I restart JDeveloper).
When I set keys F10 and F11 to other accelerator shortcuts such as make selected or run selected these work fine, even after restarting JDeveloper. The problem only seems to be with the CVS commands.
Do I have to some additional configuration for the CVS accelerators?
I am using JDeveloper 9.0.3.1 and the problem occurs on both Windows XP and SUSE Linux 8.1.
Thanks
Usman

I'm seeing this problem with set accelerators being lost after restart with JDeveloper Preview 10.1.3.0.2.
I set an accelerator to an external tool (Tomcat Startup and Tomcat Shutdown) and the accelerator is gone after I restart JDeveloper.
I apologize if this is a known bug in Preview... I did a cursory search through the forums and only found this one.
Thanks,
Chris

My computor crashed. All my songs in my itunes library were lost. After I restarted my computor, I started a new library with new itune songs. When I tried to download them on my iphone, itunes wanted to get rid of my old songs on my iphone. What can I do

My computor crashed. I lost my music from my itune library. After I restarted my computor to work again, I started a new itune library with new songs. When I tried to download my new songs to my iphone, itunes said it had to erase all my old songs in order to install the new songs. Is there a way to install new songs without getting rid of my old songs?

That is the way the iphone works.
You need to copy everything from your backup copy of your computer.

Group information lost after NW7.0 restart

Similar Messages

Maybe you are looking for