Group instantiate error

hi,
Scenario : - i had two cap. categories A and B. Under A the cap groups a1, a2 etc., and under B the cap groups b1, b2 etc., are mapped. Now i changed the mappings of a1 and a2 to come under hte category B deleting the a1 and a2 under A. I ran the /RPM_FICO_INT_PLANNING for the entire data. i am getting "Group Instantiate" error in hte Planning and roll up mode. Also when i ran the integration mode(each item is linked to an internal order in FICO) it dumps.
Appreciate if anyone can suggest how could this be resolved.
Thanks

Thanks again Priyatham
i first ran the program you mentioned(successfully) and it gave me no errors in /RPM/FICO_INT_PLANNING when on Planning and roll up mode. However, when i run it with integration it dumps and the error analysis shown as below.
Error analysis
    The program "CL_DPR_FIN_GECCO_IAOM_SERVICESCP" contains the CALL FUNCTION
     statement.
    The name of the function module to be called is "IAOM_ACCOUNT_MANAGER".
    No function module exists with the name "IAOM_ACCOUNT_MANAGER".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
pls reply.

Similar Messages

I can not uninstall the newest Muse, the error that i get is: ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group. ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installat

Can somebody please help me, i can not work on my websites anymore. Thanks !!

ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603

AI Group Config Error 10001 using Virtual Channels

In my LabVIEW block diagram, I usually enter in numbers, e.g. 0,1,2 for the channel string input of AI Config. When I try to use a virtual channel, I simply type in the virtual channel, e.g. 0,K Thermocouple,2. However, this causes AI Group Config Error 10001, which applies to an invalid channel string. What is the correct way to enter a virtual channel into the channel string?

Do you have channels with virtual names of "0", and "2"?
If not you may be confusing MAX by using both naming conventions.
Try using only Virtual names.
I generally will use an array of strings where each element is the vitual channel name with no problems.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

While I have create group asset error occured Assert condition is voilated?

Hi All,
while I have create group asset error occured Assert condition is voilated . Its runtime error .
please can you send screen shot screen layout of group asset in asset master data?
Thanks
Shailesh.
9604645129.

Hi
what is the message number/ Dump ananlysis (check it in ST22) ?
VVR

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Delivery Notes - No VAT Group (SAP Error Code -10)

Hi
I already created delivery notes before, but today an error occured "VAT-Group Missing..."
Do I have to set the VATGroup property manually in the Document Line? If I do with a fixed value, it works again.. But where do I get the right VAT Group? From customer (Business Partner) or from Item? (Maybe if you could paste me a little code example if you already solved this)
Thanks and Regards

Hi
Thanks for the hint.
I already solved it, it was a mistake in the input data of the Addon: I did not set the Warehouse Code..
If Warehouse Code is empty (""), obviously the VAT cannot be calculated (though the error message "VAT-Group Missing.." does not really help here.)
Regards

Product group creation error

Hi Guys,
While creating product group i am getting the following error can any one help me out to resolve the same
The error
Required parameters missing when calling up module
Message no. M3749
Thanks and regards
Thamizhchelvan G

Dear Thamizhchelvan,
I think you must be working in ECC 5.0 or ECC 6.0 version.
If so means first create a material say test using material type PROD - Product group in T Code MM01
and then assign the members in MC85/MC86 for the product group.
check this link
product group
This will solve your problem.
Regards
Mangalraj.S

AD Group provisioning error

Hi ,
I am trying to create group from OIM but getting below error. Please provide me solution on this.
Running CREATEOBJECT
Target Class = oracle.iam.connectors.icfcommon.prov.ICProvisioningManager
<Nov 15, 2013 2:40:23 PM PST> <Error> <ORACLE.IAM.CONNECTORS.ICFCOMMON.PROV.ICPROVISIONINGMANAGER> <BEA-000000> <oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : createObject : Error while creating user
java.lang.NumberFormatException: For input string: ""
        at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
        at java.lang.Long.parseLong(Long.java:431)
        at java.lang.Long.parseLong(Long.java:468)
        at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:104)
        at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:123)
        at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:267)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADIDCCREATEOBJECT.CREATEOBJECT(adpADIDCCREATEOBJECT.java:109)
        at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADIDCCREATEOBJECT.implementation(adpADIDCCREATEOBJECT.java:54)
        at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
        at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
        at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:3148)
        at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:716)
        at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
        at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
        at com.thortech.xl.dataobj.tcScheduleItem.insertResponseMilestones(tcScheduleItem.java:1864)
        at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(tcScheduleItem.java:890)
        at com.thortech.xl.dataobj.tcDataObj.update(tcDataObj.java:662)
        at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:508)
        at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(tcAdpEvent.java:187)
        at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(tcAdpEvent.java:3773)
        at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(tcAdpEvent.java:3955)
        at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpCGADPTUBUPDATEFORMFIELD.implementation(adpCGADPTUBUPDATEFORMFIELD.java:73)
        at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
        at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
        at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:3148)
        at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:716)
        at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
        at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
        at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(tcORC.java:847)
        at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(tcORC.java:1162)
        at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(tcOrderItemInfo.java:794)
        at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo
Thanks,
Amit

Have you supplied a value for all the neccessary fields? You could also try enabling your debug logging. There is some value that you are not providing. Are there any default values that you have not supplied a 1 or 0 for that are checkboxes?
-Kevin

Supplier Group Creation Error in SRM 7.0

Hello,
We are on SRM 7.0, SP 9. When creating a root supplier group using tcode PPOCV_BBP in SRM, we are getting a "DATA_LENGTH_0", "CX_SY_RANGE_OUT_OF_BOUNDS" error in the program "SAPLRHOMDETAIL_PP01".
This error happens during the new supplier group creation process, when we change the default name of the vendor group with a custom name and try to save the new supplier group.
Please let me know if any one has come across this issue.
Thanks,
Raj

HI Raj,
you have to implement the note 1572049 to resolve this issue.
Regards
Ajay
Edited by: ajay ch on Aug 15, 2011 10:57 AM

Partner, group editing error

Welcome to everyone! I am the first BlackBerry user.
All well and good for all. Fortnight flay the classic model. My problem is the following. Partner or group of Irish editing error "The partner can name up to 9 characters in length." Have you tried everything out of 8 characters, 10 characters + - I can not save the contact changes. Error ?????
It should help!: Dots:

Yes, there is a language barrier here & I do not understand.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Group Tree: Error in Ajax response - message: missing } in XML expression

Hi,
We were using a previous version of Crystal libs and viewer. I wanted to get up to date with the latest jars and viewer so I downloaded and installed the version with Eclipse 3.4.1 and crystal development bundled together.
I've copied the new jars from there into my existing project. I've also copied the folder cyrstalreportviewers into the project. We're using Tomcat 6.
I've now got a problem with the Group Tree at the moment since I started using the latest libraries and crystal report viewers.
My web.xml looks like this.
        <context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>/crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>webapp</param-value>
     </context-param>
        <servlet id="CrystalReportViewerServlet">
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <display-name>CrystalReportViewerServlet</display-name>
          <servlet-class>
               web.servlet.ReportingViewerServlet
          </servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
       <servlet-mapping id="CrystalReportViewerServletMapping">
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <url-pattern>/CrystalReportViewerHandler</url-pattern>
     </servlet-mapping>
A request to the uri https://......../WebApp/CrystalReportViewerHandler?id=3
The servlet doesn't do anything that seems to be uncommon. I can post more precisely what it does if needed.
The report will load correctly, I don't get an error page asking if my crystalreportviewers/ path is accessable to the server.
I get a parameter page asking for a value. I enter that and click OK.
The viewer sends a POST request to my Servlet and is handled correctly.
The report is then loaded.
On the click of an item in the Group Tree it sends an Ajax POST request and I then get the following error:
message: missing } in XML expression
fileName: https://localhost:8080/WebApp/crystalreportviewers/allInOne.js
lineNumber: 10
stack: ()@:0
eval("(\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n)")@:0
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Object],[object Object],[object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:12
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
()@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Object],[object Event])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Event])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
name: SyntaxError
Clicking on the Groups headers on the right hand pane work as expected. Although I notice they are not Ajax requests.
I've spent a few days at this now and I feel like I'm running out of options but to revert back to the previous version we were using. I presume this works elsewhere so I've got to be doing something incorrectly with my setup.
If anyone needs more info then please ask.
Thanks,
Patrick

Hi Ted,
Thanks for your reply.
That's our own Servlet. It extends javax.servlet.http.HttpServlet
doGet does the following stuff:
Creates a ReportClientDocument.
Sets the ReportAppServer to "inproc:jrc".
Opens the report as read only.
Gets the DBController and calls logon on it.
Then calls replaceConnection.
Adds some discrete param values.
Creates a CrystalReportViewer.
gets the report source from the report client document.
sets the report source on the crystal report viewer.
set own page to true.
sets the report source in the session.
The crystal Report Viewer then processes the Http Request.
doPost:
gets the report source from the session.
creates a CrystalReportViewer.
sets the report source on the crystal report viewer.
set own page to true.
The crystal Report Viewer then processes the Http Request.
One thing I changed in there was the way the data source was changed. It used to loop through tables.
Tables tables = clientDoc.getDatabaseController().getDatabase().getTables();
newTable.setQualifiedName(qualifiedName);
clientDoc.getDatabaseController().setTableLocation(origTable, newTable);
Now it does this:
DatabaseController dbController = clientDoc.getDatabaseController();
dbController.logon(username, password);
dbController.replaceConnection(new ConnectionInfo(), connectionInfo, null, DBOptions._useDefault);
If you need more info please do let me know. Thanks for your help.
Patrick

Group Calendar Error in UWC

Hi,
We are having a problem in view Group Calendar, After creating group calendar and adding members, when we try to view it in UWC, it gives following error:
Calendar Not Available*
Could Not Display View*
The selected calendar(s) was either deleted or does not exist or you do not have permissions to view it. Select another calendar(s).*
How ever we can View / Edit the same group calendar through "SUN Java Calendar Express"....Any idea which patch level can fix this issue..???
Here below are the Product versions:
UWC Patch Level:
Patch: 118540-21 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
Patch: 118540-42 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
Calendar Server Patch level:
Patch: 116577-24 Obsoletes: 117706-08 Requires: Incompatibles: Packages: SUNWica5, SUNWics5
Patch: 117860-16 Obsoletes: Requires: Incompatibles: Packages: SUNWica5, SUNWics5
Patch: 118186-16 Obsoletes: Requires: Incompatibles: Packages: SUNWica5, SUNWics5
Patch: 118458-03 Obsoletes: Requires: Incompatibles: Packages: SUNWscics
Patch: 117776-08 Obsoletes: Requires: Incompatibles: Packages: SUNWscics

Sp00ky_Geek wrote:
We are having a problem in view Group Calendar, After creating group calendar and adding members, when we try to view it in UWC, it gives following error: Which interface did you use to create the group calendar, how many members did you add and what were they?
Calendar Not Available*
Could Not Display View*
The selected calendar(s) was either deleted or does not exist or you do not have permissions to view it. Select another calendar(s).*Are there any errors in the uwc.log file to indicate what the problem may be?
How ever we can View / Edit the same group calendar through "SUN Java Calendar Express"....Any idea which patch level can fix this issue..???Not enough information to determine what the cause may be. I would start narrowing down the problem by removing group members one by one and seeing if there is a particular member which is causing the problem. Then look at that account and see if there is anything different/unusual etc.
Regards,
Shane.

GROUP BY error executing a dblink querie on 11g

Hi all,
I would appreciate your help.
Thanks in advance.
Best regards, Cristina.
Our customer is upgrading DB from 10g to 11g (11.2.0.3) and the querie that used to work on 10g does not work on 11g throwing the following error.
The querie uses a dblink to a 10g instance (ORAHIS)
SELECT to_char(DTLMCBR,'ddmmyyyy'), sum (valor_doc) FROM [email protected] (dblink to 10g) GROUP by to_char(DTLMCBR,'ddmmyyyy');
ERROR:
ORA-00979: Not a GROUP BY expression
ORA-02063: preceding ORAHIS line

user607378 wrote:
SELECT to_char(DTLMCBR,'ddmmyyyy'), sum (valor_doc) FROM [email protected] (dblink to 10g) GROUP by to_char(DTLMCBR,'ddmmyyyy');
Hi Christina, maybe you oversimplyfied the statement. But what you posted should work (apart from the (dblink to 10g) which I think is just a comment.
Are DTLMCBR and VALOR_DOC columns in this table? If it is a local function and/or synonym then this can be one reason.
SELECT to_char(DTLMCBR,'ddmmyyyy'), sum (valor_doc)
FROM [email protected]
GROUP by to_char(DTLMCBR,'ddmmyyyy');I would write the query differently. But this wouldn't explain any error.
SELECT to_char(trunc(DTLMCBR),'ddmmyyyy'), sum (valor_doc)
FROM [email protected]
GROUP by trunc(DTLMCBR);Is there any chance that during the upgrade your table and/or column names where changed into lowercase logic?
SELECT to_char(trunc("DTLMCBR"),'ddmmyyyy'), sum ("valor_doc")
FROM "isbtdofi00"@ORAHIS.CLI.PT
GROUP by trunc("DTLMCBR");

Group by error "ORA-00979: not a GROUP BY expression"

I am working on class assignment. Looking to solve the error.
Can anyone tell me what I did wrong?
Data:
Customer table [custid]
Plant Order Table [orderid, cusid]
PlantOrderDetail Table [orderid, plantid, quantity, unitprice]
I am trying to get a total amount that each customer spend (lump-sum of the money that each customer spend on us)
My query:
SELECT cus.custid, cus.custnamelast, SUM(pld.quantity * pld.quotedprice) as "Total Due"
FROM Customers cus
JOIN PlantOrders plo ON cus.custid = plo.custid
JOIN PlantOrderDetails pld ON plo.orderid =pld.orderid
GROUP BY cus.custid;
Result:
SELECT cus.custid, cus.custnamelast, SUM(pld.quantity * pld.quotedprice) as "Total Due"
ERROR at line 1:
ORA-00979: not a GROUP BY expression

Hi,
You have to add cus.custnamelast to the GROUP BY clause
Tip: to post formatted code please enclose it between {noformat}{noformat} tags (start and end tags are the same) :)
Regards,
Edited by: Walter Fernández on Jan 30, 2009 11:58 PM

App_special.instantiate Error

Hi,
I am trying to create a Special Menu Entry in my CUSTOM PLL using below code but am getting an error on compiling
'identifier APP_SPECIAL.INSTANTIATE must be declared'
The CUSTOM.pll is in the correct FORMS60_PATH and all my other code in CUSTOM pll otherwise complies OK.
Any ideas what I may be missing ?
Thanks
Shankar
a menuitem;
param_to_pass1 number := 3000;
param_to_pass2 number;
Begin
a := FIND_MENU_ITEM ('SPECIAL.SPECIAL15');
if (event_name = 'WHEN-NEW-BLOCK-INSTANCE') then
if (form_name = 'OEXOEORD' AND block_name = 'LINE') then
app_special.instantiate('SPECIAL15', 'Query Form');
SET_MENU_ITEM_PROPERTY(a, displayed, property_true);
SET_MENU_ITEM_PROPERTY(a, enabled, property_true);
end if;
end if;

OK, resolved it, had accidentally deleted the APP_CORE2 library !

Group instantiate error

Similar Messages

Maybe you are looking for