Group Management approval failed estatus pending

Hi everybody, have a nice new year 2015,
I have an error about approval notifications and the issue is explained below in detail:
Whoever the user (approver) try to approve the requests from FIM portal (from
My Pending Requests tab), he is getting the "Request Failed" popup. the requests is not getting approved and remains with
Pending state.
There are no failure requests entries generated in the FIM admin portal (when looking into
Search requests tab) and the requests remains in Authorizing state which seems like there is a pending approval to complete the request. Because of this, in the fim server, I was unable to identify that the requests
are not getting approved  (as the FIMADMIN).
The requests are stucked. All the workflows in the stucked requests are left in
Running state.
As a process, If the approvers do not approves the request in 5 days, the request gets expired on the 6th day. I have seen that the stuck requests initiated in last week are not getting
expired and remains in Authorizing state.
In the fim portal event viewer log , we have seen the below error each time the approvers were trying to approve requests and had got
"Request Failed" error pop-up.
I've done the following workarounds and none fixed it:
http://www.networksteve.com/forum/topic.php/FIM_2010_R2:_Requests_not_getting_approved_from_FIM_Portal./?TopicId=38033&Posts=7
My actually versión is 4.1.3419.
Thanks in advanced
Regards
FIM

Hi,
Once you get the ListID, please access the url in format as:
https://sitename/_layouts/15/ListEdit.aspx?List=dd96257b-9004-49c3-99fc-0dc4b9213c12
By the way, I get the ListID in Response body but not in
Request body.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Dynamic Distribution Group - Moderator approval fails

    hi,
    (On premise and office365 Exchange)
    we use the above in our organization. we have some dynamic groups created. I have a moderator for a couple of groups. when a user sends an email to one of the group that has a moderator, the latter gets an email to either approve or reject the message. when
    he/she clicks on the accept button they get the following error:
    Delivery has failed to these recipients or groups:
    Microsoft Exchange Approval Assistant
    Your message wasn't delivered because the recipient's email provider rejected it.
    Diagnostic information for administrators:
    Generating server: DB4PR07MB0701.eurprd07.prod.outlook.com
    SystemMailbox{d57a4133-7e21-486e-9917-f7fb70dc2cdb}@XXXXXX.onmicrosoft.com
    Remote Server returned '< #5.7.12 smtp;550 5.7.12 RESOLVER.RST.SenderAuthenticated; Delivery restriction check failed as sender not authenticated>'
    Original message headers:
    Received: from AMXPR07CXXXXX.eurprd07.prod.outlook.com (10.242.64.XX) by
    DB4PR07XXXXX.eurprd07.prod.outlook.com (10.141.45.XX) with Microsoft SMTP
    Server (TLS) id 15.1.6.9; Fri, 31 Oct 2014 14:20:41 +0000
    Received: from DB3FFO11XXXXX.protection.gbl (2a01:111:f400:7e04::130) by
    AMXPR07CXXXXX.outlook.office365.com (2a01:111:e400:1000::20) with Microsoft
    SMTP Server (TLS) id 15.1.11.14 via Frontend Transport; Fri, 31 Oct 2014
    14:20:41 +0000
    Received: from XXXXX.XXXXX.co.ke (197.220.102.XXX) by
    DB3FFO11FD053.mail.protection.outlook.com (10.47.217.XXX) with Microsoft SMTP
    Server (TLS) id 15.0.1049.20 via Frontend Transport; Fri, 31 Oct 2014
    14:20:40 +0000
    Received: from XXXXX.XXXXX.co.ke (192.168.11.XXX) by
    XXXXX.XXXX.co.ke (192.168.11.XXX) with Microsoft SMTP Server (TLS) id
    15.0.847.32; Fri, 31 Oct 2014 17:20:37 +0300
    Received: from XXXXX.XXXXX.co.ke ([fe80::4b9:1080:7301:f8be]) by
    XXXX.XXXXX.co.ke ([fe80::4b9:1080:7301:f8be%15]) with mapi id
    15.00.0847.xxx; Fri, 31 Oct 2014 17:20:37 +0300
    From: "XXXXX XXXXX " <[email protected]>
    To: Microsoft Exchange Approval Assistant
            <SystemMailbox{d57a4133-7e21-486e-9917-f7fb70dc2cdb}@XXXXX.onmicrosoft.com>
    Subject: Approve: * QUOTE OF THE DAY *
    Thread-Topic: * QUOTE OF THE DAY *
    Thread-Index: Ac/1FciNlxJwVzCBTJKjqDyb/OnY+gAAAOtxAAAChkA=
    Date: Fri, 31 Oct 2014 14:20:37 +0000
    Message-ID: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [192.168.1.XXX]
    Content-Type: text/plain; charset="us-ascii"
    Content-Transfer-Encoding: quoted-printable
    MIME-Version: 1.0
    Return-Path: [email protected]
    X-EOPAttributedMessage: 0
    X-Forefront-Antispam-Report: CIP:197.220.102.xxx;CTRY:KE;IPV:NLI;EFV:NLI;
    X-OriginatorOrg: XXXXX.onmicrosoft.com
    X-Microsoft-Antispam: UriScan:;
    X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:DB4PR07xxxxx;
    Kind Regards, Khuzema R.

    Hi Khuzema,
    Please confirm if your Dynamic Distribution Group is created on-promise and the moderator is on the Office365 Exchange.
    If the Dynamic Distribution Group and the moderator are in different Exchange servers: On-premise and Online, please open the Dynamic Distribution Group in EAC, then check
    Senders inside and outside of my organization in delivery management to have a try.
    If it doesn’t work, I suggest we can change a moderator who is in the same mailbox server with the Dynamic Distribution Group to check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • COREid 7.0.4 - Group Manager Workflow - Applet Fails to Load

    I am having a problem with a new installation of COREid 7.0.4. All applets in User, Group and Org Manager work fine with the exception of the Group Manager Workflow configuration Applet. The applet fails to load. Has anyone ever experienced this problem before? Any help is appreciated. The system information is:
    Windows 2003 Server
    IIS 6.0
    AD 2003
    Java Plug-in 1.5.0_04
    The Java Console trace information is pasted below.
    Java Plug-in 1.5.0_04
    Using JRE version 1.5.0_04 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\user
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    p: reload proxy configuration
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    basic: Registered modality listener
    liveconnect: Invoking JS method: document
    liveconnect: Invoking JS method: URL
    basic: Referencing classloader: sun.plugin.ClassLoaderInfo@14ce5eb, refcount=1
    basic: Added progress listener: sun.plugin.util.GrayBoxPainter@3e0339
    basic: Loading applet ...
    basic: Initializing applet ...
    basic: Starting applet ...
    network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 with proxy=DIRECT
    network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 with cookie "ObTEMC=648DCJKwxHQaRBcRGeOlel6xakVeEZs%2FVoSGqgLCgKemQQqI1qzeb30lOpg6OErpJp2LLzZogAK%2Fsrwtl%2BSREhXMw5g5ba4wUveFKa2oCzwcmfgBcGizP2eKV6gQFkKkXtA%2FsuydnB1KEIQhYdhevWExlcN8yRFE1TYKj%2BJxXdrdf8bP6jVLmPp5MXwHrO0iojKnh1iumldPon8i67uy%2BiurULgOkxsGA4Io%2F363uDc%3D; ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23"
    network: Server http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 requesting to set-cookie with "ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23; path=/;"
    network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 with proxy=DIRECT
    network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 with cookie "ObTEMC=648DCJKwxHQaRBcRGeOlel6xakVeEZs%2FVoSGqgLCgKemQQqI1qzeb30lOpg6OErpJp2LLzZogAK%2Fsrwtl%2BSREhXMw5g5ba4wUveFKa2oCzwcmfgBcGizP2eKV6gQFkKkXtA%2FsuydnB1KEIQhYdhevWExlcN8yRFE1TYKj%2BJxXdrdf8bP6jVLmPp5MXwHrO0iojKnh1iumldPon8i67uy%2BiurULgOkxsGA4Io%2F363uDc%3D; ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23"
    network: Server http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 requesting to set-cookie with "ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23; path=/;"
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnew.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVdelete.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVadd.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVsaveworkflow.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVcancelworkflow.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVprevious.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnext.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnew.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVnew.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVmodify.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVmodify.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVdelete.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVdelete.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVcopy.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVcopy.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVview.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVview.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVenable.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVenable.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVexportall.gif
    basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVexportall.gif
    java.util.NoSuchElementException
    at java.util.StringTokenizer.nextToken(Unknown Source)
    at com.oblix.workflow.ObWorkFlow.prepareForms(ObWorkFlow.java:3010)
    at com.oblix.workflow.ObWorkFlow.init(ObWorkFlow.java:1109)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    basic: Exception: java.util.NoSuchElementException
    Exception in thread "thread applet-com.oblix.workflow.ObWorkFlow.class" java.lang.NullPointerException
    at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
    at sun.plugin.AppletViewer.showAppletException(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

    Yes, I do
    It's working for other things, only problem is usermanager workflow definition
    This is the error:
    Java(TM) Plug-in: Version 1.3.1_07
    Using JRE version 1.3.1_07 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\pwaxa64
    Proxy Configuration: Browser Proxy Configuration
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    java.util.NoSuchElementException
         at java.util.StringTokenizer.nextToken(Unknown Source)
         at com.oblix.workflow.ObWorkFlow.setDisplayTypes(ObWorkFlow.java:2085)
         at com.oblix.workflow.ObWorkFlow.init(ObWorkFlow.java:1027)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks

  • Approval Failed Error in MSS

    Hi,
    i am working on MSS Travel Management Work Flow.
    The problem is when i wants to approve the Requests from MSS ( Portal ) it is giving me an error Saying 'Approve Failed ' & also all the activites i click it is giving ' XXX Failed ' .
    But the workflow is working fine in R/3. Only problem is when i am trying to do it from Portal.
    Can any one tell me what could be the problem ?
    Waiting for ur reply ....
    Regards,
    Srinath

    I think this is aproblem in MSS. Is this happening to all the User's or some of the User's. I think there is some setting that you need to incorporate. Please check in the MSS forum.
    Thanks
    Arghadip

  • Group MSA account fail when Domain Controller in Test Domain Fails to start KdsSvc. Event ID 7023

    Yesterday, in my test domain, I created the KDS root key using the Add-KdsRootKey –EffectiveTime ((get-date).addhours(-10))
    command on a DC that is not the PDC Emulator because it was the server I was on at the time.  Today, when I tried to create gMSA accounts on the PDC emulator, I get:
    Event ID 7023 The Microsoft Key Distribution Service terminated with the following error: An Exception occurred in the service when handling the control request
    I turned on logging on to the KdsSvc and get 2 other errors:
    KdsSvc Event ID 4001: Group Key Distribution Service failed to start. Status 0x80070020
    KdsSvc Event ID 4007: Group Key Distribution Service cannot connect to the domain controller on local host.  Status 0x80070020.  Group Key Distribution Service cannot be started because of the error.  Please contact the administrator to resolve
    the issue.
    I took the opportunity to clean up AD, the Schema, and DNS, but the kds errors continues.  I am replicating successfully, DNS changes are reflected immediately, and when I run the get-KDSRootKey on the failing server, the key is returned.  The
    Get-KdsConfiguration matches the KDS config on the DC that originally ran to create the key.
    I have a pretty strict GPO pushed to my DCs but I am still able to create gMSAs on the other server.  I checked ADS&S and found the msKds-ProvRootKey so I know it is at the domain level, but there is so little documentation on the KdsSvc that I
    am not sure if it is working as planned.  I have tried unassigning several GPO configuration items but I am throwing darts at this point.  I have also uninstalled McAfee AV; IDS/IPS; Firewall.
    With that said, I have questions:
    Will gMSAs still work even though the domain pdc emulator cannot start the service?
    Is the KdsSvc supposed to start only on the server Add-KDSRootKey was originally created?
    What happens if the server the KdsSvc key was created fails and has to be removed from the domain?
    Is there any books or configuration items I can review to learn the KdsSvc better?
    Env:
    Windows Standard Server 2012 R2 x64
    Active Directory 2012 R2 Schema Updated from Windows 2008 R2
    All FSMO roles are on the PDC Emulator which is a Windows 2012 R2 DC
    DCDiag returns no errors or test failures
    Repadmin returns clean results (/showreps & /replsum)
    Windows 2008 R2 Root CA hierarchy (not DCs)
    W32tm services are running with less than 6/10's of a ms difference among the domain.

    Hi,
    For Windows Server 2012, the Windows PowerShell cmdlets default to managing the group Managed Service Accounts instead of the original standalone Managed
    Service Accounts.
    New-ADServiceAccount -name <ServiceAccountName> -DNSHostName <fqdn> -PrincipalsAllowedToRetrieveManagedPassword <group>
    -ServicePrincipalNames <SPN1,SPN2,…>
    Did you use the command abouve?
    Here is a good bolg:
    Windows Server 2012: Group Managed Service Accounts
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    Hope this helps.

  • Even after manager approves timesheet, it still shows data

    Hello Friends,
    I am working on FIORI Timesheet approval app and once manager approves timesheet, message says "Timesheet approved successfully". But, if I go back to launchpad home screen and it still shows the employees timesheet for whom Manager has approved.
    Please find attached below screenshot
    Srikanth

    Hi Srikanth,
    Probably you use old support package. Please check you have the latest support package.
    SRA010 SP03 is the latest one.
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Disable Status Manager Approval

    I Have the Task Status Manager Approval set to disabled but the person who published the project is seeing task approvals in the Approval Center.  Is this the designed behavior?
    The behavior I want is when someone submits their timesheet, I want it to go straight to the timesheet manager for approval.

    John --
    The flaw in your assumption about Project Server 2013 is that people can fill in Timesheets about task work, and then NOT have the task work update the relevant project.  The Project Server 2013 system is programmed to do the exact opposite of what
    you want.  When a team member fills out and submits a timesheet containing task progress, the system automatically sends an approval update request to the project manager.  The project manager can see these pending approvals in the Approval Center
    page in PWA, where he/she can approve or reject the task updates.  Once the task updates are approved, the system pushes the task update data into the project.
    The only way to avoid this behavior is to capture top-level data in timesheets from your team members.  By doing this, your team members can enter hours worked on the project as a whole, but not enter progress against individual tasks.
    Hope this helps.
    Dale A. Howard [MVP]

  • HOW TO MANAGER APPROVE LEAVE REQUEST AT A TIME MORE THEN TWO

    Hi Experts,
    This is Kalyan.I am working on ess/mss . How to manager approve four work items at a time .
    And how to add  Custom Fields in UWL .Can u please help me.
    Regards,
    Kalyan

    Hi Kalyan
      Suppose if multiple persons raise workflows like Leave, Travel, Claims, Loan every workflow is different. You cannot have single workflow and single work item. The work item comes to UWL for the approver. In the UWL you can customize the screen put a radio button in the screen such that only approve and reject button. So every wprk item can be just selected with approve and reject radio button on the UWL itself. Finaly update button will update the entier page with the approvals. But this is very very very difficult.
      Think logically Y the approver wants to do mass approval. Suppose the approver receives the leave work item without seeing the leave quota will he approve?. Similiarly for travel without seeing the expense amount will the approver approve the trip.
    UWL is for all the module like Travel, Leave, Claims, Loan etc. Every module the approval screen itslef different. So mass approval is not possible.
    If ESS is implemented only for Leave or Travel or Payroll then its possible. In that case customize the UWL with radio button and after mass approve or rejection finally need to update. But this is absolutly not advisable since every person the data are different.  So mass approval is not advisable.
    I think am logically correct?
    Regards
    vijay

  • Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

    Hi All
    Please help
    my server not working showing display error window server 2008 r2  error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
    Please help me how to resolve this issue ???
    thnaks !!!

    Hi,
    If there is any external device plug into your computer, please unplug it and restart the Server.
    You can also test the issue in Safe mode.
    If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
    Kate Li
    TechNet Community Support

  • Group Policy Infrastructure Failed : The target name is incorrect

    Hi,
    I am currently facing issues regarding Group Policy, users are unable to change the password.
    When i run gpupdate /force on servers, the user policy and computer policy are successful but when i run the same on any client i receive error as per below,
    " C:\Windows\system32>gpupdate /force
    Updating Policy...
    User policy could not be updated successfully. The following errors were encountered:
    The processing of Group Policy failed. Windows attempted to read the file \\mydomain.com\SysVol\mydomain.com\Poli
    cies\{5C07D38D-C488-4E32-9871-AA99DAB86898}\gpt.ini from a domain controller and was not successful. Grou
    p Policy settings may not be applied until this event is resolved. This issue may be transient and could
    be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to th
    e current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    Computer Policy update has completed successfully.
    To diagnose the failure, review the event log or run GPRESULT /H GPReport.html from the command line to a
    ccess information about Group Policy results."
    Below is the result of GPRESULT /H GPReport.html.
    Component Status
    Component Name Status
    Last Process Time
    Group Policy Infrastructure Failed
    9/8/2014 1:56:58 PM
    Group Policy Infrastructure failed due to the error listed below.
    Logon Failure: The target account name is incorrect. 
    Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
    Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 9/8/2014 1:56:48 PM and 9/8/2014 1:56:58 PM.
    Any idea on how to solve this problem ? thanks.

    Hi Calin,
    1). yes the dns resolution is working fine in our environment
    2). the GPO object and its folder was deleted and doesnt exist anymore.
    3). IPconfig/all result as per below from client
    C:\Users\arslan>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : ITMGMTPC
       Primary Dns Suffix  . . . . . . . : mydomain.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : mydomain.com
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . : mydomain.com
       Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection
       Physical Address. . . . . . . . . : XXXXXX
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.200.49(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Wednesday, September 10, 2014 8:50:36 AM
       Lease Expires . . . . . . . . . . : Thursday, September 18, 2014 8:50:36 AM
       Default Gateway . . . . . . . . . : XXXXXX
       DHCP Server . . . . . . . . . . . : XXXXXX
       DNS Servers . . . . . . . . . . . : 192.168.200.1
                                           192.168.240.2
       Primary WINS Server . . . . . . . : 192.168.200.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    3). IPconfig/all result as per below from server
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : hopdc
       Primary Dns Suffix  . . . . . . . : mydomain.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : mydomain.com
    Ethernet adapter Local Area Connection 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
     VBD Client)
       Physical Address. . . . . . . . . : XXXXXX
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.200.1(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : XXXXXX
       DNS Servers . . . . . . . . . . . : 192.168.200.1
                                           192.168.240.2
       NetBIOS over Tcpip. . . . . . . . : Enabled
    4. please find below findings,
    C:\Users\arslan>nltest /dsgetsite
    HO1
    The command completed successfully
    C:\Users\arslan>nltest /dsgetdc:domain
    Getting DC name failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

  • Creative Cloud management app failed to install, again, remedy, clue

    It failed yet again today for me, but in a particular way, and thereby gave a clue at least of one probably unknown failure mode which I can pass on.
    - I was trying to install the very latest Creative Cloud manager, which self-announced itself today 12 February 2014 when I tried to use it to check for updated applications.
    - it downloaded and started to run, then failed with the very clever 'failed to install' small alert. A small alert for very small knowledge of the actual cause? Surely you can do better.
    - I went on the forums and found all the times and ways this has caught up others before. I saw the 'rename OOBE folder' trick, and remembered that thus was the only thing that would actually fix the Creative Cloud manager one or more times before on my computers.
    - thus I tried to rename OOBE after killing every Adobe-named app in the Windows 8.1 Task Manager, and failed -- due to some nameless program holding it open.
    - I then stopped and restarted the machine.
    - I thought a moment and realized I'd run another Adobe installer an hour or two before, to updated Premiere Elements 11 to the latest possible Adobe Camera Raw as its updater offered.
    - thus instead of renaming OOBE, I ran the Adobe Creative Cloud manager updater when it offered again towards the end of booting up
    - this time it succeeded, hence I believe that other Adobe ACR installer had been at fault, leaving files unclosed or otherwise locked within OOBE. That's the new clue to Adobe developers.
    - If this hadn't succeeded, I'd have stopped and restarted the machine again, and then renamed C:\Program Files(x86)/Common/Adobe/OOBE.
    I think this renaming is a lot better way to proceed (stop/start, adding possibly safe boot with no startup apps if OOBE remains locked to renaming when that method may be needed) than using the AdobeCreativeCloudCleanup tool as the troubleshooting page recomnmends.
    The reason: this benighted cleanup tool does _not_ offer any way to remove Creatuive Cloud manager itself, even though support here suggests that it does. You can only choose variations which insist on uninstalling all your Adobe programs, CS6 included with Creative Cloud ones. I am not going to do that except at extreme duress. So far renaming OOBE and thus forcing Creative Cloud to recreate it has fixed every one of the blind, unspecific, and prevalent errors with Creative Cloud.
    I think that much better work can be done on this Creative Cloud software, but I am constrained by a particular American folk tale told to children, which suggests 'If you don't have anything nice to say, then don't say anything.' 
    I can only say that respect will be gained not by talk, or telling a lot of complicated procedures to recover software that costs like an automobile.
    Respect will only be gained by really involving yourself, learning, and then doing all of this correctly. That's what every respected software developer in the world does.

    Jeff, thanks equally for coming back on this.
    - I did begin the process on the page you linked.
    - when I got to the step running the CC Cleaner tool, it offered me no option to remove the Creative Cloud Manager -- only to remove all my apps, which are largely CS6. This is counter to the suggestion that you can remove just the manager, and not welcome as you will understand.
    - it was at this point that I recovered the procedure of just shifting OOBE out of play. When this wasn't possible due to invisibly held open folders or files, I realized the problem might have been due to the earlier Premiere 11 ACR update (you have to think a bit for reasons why it might want to do that...).
    - Thus when I stopped and restarted to assure a clean reboot, I thought to just let the Creative Cloud Manager try again when it offered this.
    - Without further intercession, this time the Creative Cloud Manager succeeded.
    I would say that the move-OOBE-out-of-play to force recreate (or sometimes it has been move a certain file in OOBE) is a much preferred repair that has always worked for me in the numerous failures of Creative Cloud Manager over the last year. We don't really want to spend the hours and take the risk of removing all our Adobe CS and/or CC applications, plus adding all of their updates again, as you will also understand.
    This points to a way Adobe could very much lower the agony of the Creative Cloud Manager, its updates and its crossed wires. I do appreciate the problem, though not why at your budget levels it hasn't had a definitive response. Some experience directing projects and having to take over offshore team management directly might suggest where you are finding the difficulty, at least.
    In the mean time, why not put in place a recovery for failed Creative Cloud Manager activities including updates, which would simply and automatically do the task of accurately renaming the OOBE folder (for each attempt, no matter how many times  it had been done before)j, then triggering a restart followed by reinstall and information recovery of the Creative Cloud Manager? It could be something like Microsoft's Fix-Its, for convenience, which would also leave open a doorway to reversal if somehow necessary.
    I suggest you might lower the incidence of this genre of problems by a very large factor if you were to do so, replacing the presently procedure with its flaws for those employing Adobe software.
    Anyway, I hope the suggestion leads in positive ways for your products, and wish your team a good day.

  • TS1424 Message saying...Connection Manager invoke failed to find service connection URL why?

    When I go to sign in it iTunes a message comes up stating:  Connection Manager::invoke::Failed to find service connection url.  Does anyone know what this means and how to fix this issue?

    Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

  • TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  I

    Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  Ideas?

    Hi, you have to logout from your iTunes account and reconnect it:
    Settings / iTunes & App Stores / ...
    https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
    Hope this helps... :-)

  • HT1527 Whenever I try to redeem a card or access my account I get a message "connection manager invoke failed to find service connection url".  I reset my password, logged out and tried logging back in, same message.  How do I solve this issue?

    Whenever I try to log in to my account or redeem gift cards, I get a message saying "Connection Manager Invoke Failed to find a service connection url".  I changed my password, logged out and the same thing keeps happening.  Does anyone have a solution for this?

    Hello,
    Try to go to the settings on your phone... Settings > Store > Click your Apple ID: And sign out from your account, then sign in again .... This solved the problem for me on my iPhone 4s

  • I can't log on to itunes account. Keep getting the error: Connection Manager::invoke::Failed to find service connection url. What can I do?

    I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?

    Hi, Buster1932.
    I would recommend logging out of your account then logging back in.  If the issue persists, see the article below. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

Maybe you are looking for