Group not updating.

I am using the csutil -i command to complete an update and move users from one group to another. The text file has the UPDATE:<user name>:PROFILE:7 syntax and works great as far as you can see on the ACS GUI. However, when you run a csutil -d, the user maintains it original group. So, if it was in group5 and you updated so it would go to group7, the dump.txt would still say group5. Now, if you look at the user that was suppose to be updated, it has switched groups from group5 to group7. And if you click submit and then do a csutil -d, you will see that the group has now changed from group5 to group7. Is there a way to do a global submit on users in a group? I have done submit and restarts all over the place and that does not work. Any ideas? Thanks

As far as I know, you cannot do a global submit on users in a group

Similar Messages

Exchange Distribution Groups not updating in Active Directory

Hi all,
I'm not sure if this is intended behaviour or not, but any distribution group we create in Exchange ECP does not update in Active Directory Users and Computers. Any particular reason why?
For example, we have a user group called "Managers" and we've recently created a new group called Area Managers. We've since moved some people out of Managers and put them in Area Managers, however in Active Directory all we see is the Managers
group with all the old managers in there. The OU for the Area Managers group has been set correctly.
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Hi,
Please run the following command to confirm the members of two groups.
Get-DistributionGroupMember -Identity Area Managers
Get-DistributionGroupMember -Identity Managers
I also suggest to remove the member from “Managers” in AD then check the members of “Managers” in EAC to check this problem.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

TFS Group not updating in Release Manager

I have a bunch of release paths and plans tied to a development group with security for those plans defined by TFS Groups managed by the development team. They recently had a new hire start and added him to their TFS groups but the developer can't
access their release plans in Release Manager. I checked the groups he was added to in TFS in Release Manager and they don't have him listed. I verified that the developer is a member of those TFS Groups via the team's project site. I can't delete
the group and re-add it since it is part of multiple release paths and plans so, short of detaching the group from TFS and adding the user in Release Manager, I can't find a way to get the group to update in Release Manager. Any ideas?

Hi Coding4ever,
Thanks for your reply.
I reproduced this scenario in my RM 2013 Update 4 Client, and received the same result. For this issue, you can try this workaround: open that TFS group in RM Client, click
Detach From TFS button, then click Delete button delete this TFS group from RM Client, then click
New>>New From TFS to re-add this TFS group into your RM Client.
For this TFS group updated users not show in RM Client issue, please
submit it to Microsoft Connect Feedback portal at: https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office365 Exchange Security Group not updating in Sharepoint Online

We have created a new Office365 Exchange Security Group that contains several other Exchange Security Groups. This group will not show up in either the SharePoint Web admin or SharePoint Designer views.
How can I force SharePoint to re-synchronize the Office365 Tenant users/groups?

Hi,
According to your post, my understanding is that Office365 Exchange Security Group does not updating in Sharepoint Online.
How long did you wait after creating the Group to see if they show up in SharePoint Online? The back-end replication can take some time, even days from my experience.
Here is a similar thread for your reference:
http://community.office365.com/en-us/f/156/t/173994.aspx
More information:
CIAOPS: Using Office 365 security groups with SharePoint Online
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BOXI R2 SP4 (FP 4.1) Windows AD Groups not updating

I just patched my BO XI R2 server to service pack 4 and applied fix pack 4.1. I am having an issue where my Windows AD groups are not updating correctly. When I log into the CMC and go to users, click on an account name and then click on the "Member of" tab, I don't see the Windows AD groups that the user belongs to. However, when I go to "Groups", click on the group name that the user is supposed to belong to and then click on "Users", I see the user's account name/login. Has anyone else seen this problem? I have tried the following:
- remove the user from the Windows AD group using Active Directory Users & Groups and adding them back in
- adding the user into a new Windows AD group and import that AD group
This is currently a pretty big problem for me so if anyone has any insight into how to fix this, I would greatly appreciate it. Thanks so much.
David Tjen
Art.com

Hi Glen,
It is expected that if changes are made in AD (that don't remove a user from all groups) will not be instant on the CMS. When you go to a group and click on the members/users tab. You will be prompted that this query may take some time. This action sends a live query to AD and therefore should be up to date. When you click on a user and try to view the groups for which they are a member this is not a live query but rather accesses a graph that the CMS maintains in memory. This graph is set to refresh every 15 minutes by default so there should at least be a 15 minute delay. Then the time to update the graph can vary as well. If you have 1 groups it should take a few seconds, but if you have 1000's of groups or many nested groups it could take much longer. To initiate this process you can hit update in the CMC\auth\AD or restart the CMS. If you find that this is not how the system is working, then it is best to open a message with support. These cases can be quite involved and usually require considerable CMS tracing and maybe packet scanning to resolve.
Hope this explains things....
Regards,
Tim

Address book groups not updated in iSync and iTunes-iPod-info sync

Changes to address book groups are not reflected in iSync and iTunes. I.e. if I remove a group or add a group it is still the old list of groups that is listed in iSync and iTunes available for syncing with my phone or iPod. How do I get these list to be updated and reflect the present list in Address Book?

The suggested resolution essentially said "delete the address book and start over."
Ok, I can see how this will help but... a few questions:
1. How to I re-load the address book with my 500+ contacts without loosing my groups and all the data? The suggestion in the other discussion doesn't give any guidance on this
2. What caused the problem to begin with? In other words, how can I prevent it from happening again?
I discovered the syncing problem about the time I did the following three things:
1. Upgraded to 10.5.2
2. Upgraded my iPhone (and iTunes) to 1.1.4
3. Installed Bento (possibly a red herring) -- but it DOES connect to address book

Dynamic Group not updating Workstations

Hello NG
In our environment i created a simple dynamic workstation group.
Unfortunatelly the group will not be updated with the machines that are in
the device list. Only if I touch the rule the machines are imported. I have
to change nothing! Only cklick apply and then the policies are associated to
this dynamic group.
Why this? What could be cause of this issue?
Thanks in advance for your help
Ramon

Dynamic Groups are normally updated once daily, during the overnight hours.
On 4/27/2011 11:21 AM, Ramon Lustrati wrote:
> Hello NG
>
> In our environment i created a simple dynamic workstation group.
> Unfortunatelly the group will not be updated with the machines that are
> in the device list. Only if I touch the rule the machines are imported.
> I have to change nothing! Only cklick apply and then the policies are
> associated to this dynamic group.
>
> Why this? What could be cause of this issue?
>
> Thanks in advance for your help
>
> Ramon
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Contact Groups not updating

So I recently set up a few groups of contacts in my MobileMe account. The usual friends, family, businesses, etc. I had "push" set to on and the next day I checked my contact groups on my phone. I could see the groups listed, but when I opened any group, it was a blank list.
I double checked that I had properly set up the contact groups in my MobileMe account and found that they are still setup properly.
So my question is does anyone know why I'm getting the newly created groups pushed to my phone without any of the contacts that should be included listed?

There is an easier fix for this than creating a dummy contact. You just need to refresh the Mobile Me account on your iPhone. Follow these steps to do so and all of the contacts you put in the groups on MobileMe will show up on your phone.
1. On Iphone go to "Settings"
2. In settings, go to "Mail, Contacts, Calendars"
3. Under the Accounts, select your MobileMe Account
4. Turn the Contacts button to "Off". You will get a pop up stating "Synced Contacts will be removed from your iPhone". Click the "Stop Syncing" button. This will remove all your MobileMe Contact data from your iPhone. When you select the button you will see a window with a spinning icon stating "Turning of Syncing". Wait for this to finish.
5. Once Syncing has been turned off. Turn it back on again.
6. Hit the home button to exit the settings.
7. Open up the Contacts application. When you first open it, there will be no contact data, but the network activity indicator will be spinning. The phone is downloading all the MobileMe data again.
8. Once it is done, you will see all the contacts (but the group button will be missing). Hit the home button again to exit the app.
9. Open the Contacts app again. The Groups button will appear. Click on the group you created and you will see all the contacts you added on MobileMe for that group.
It looks like every time you add a new group you will need to do this. But if you only add a new contact to an existing group, it will update on the iPhone with no problem.

AD Group membership not updating in Sharepoint Foundation when adding Active Directory group to Sharepoint group

I have Sharepoint Foundation installed with the latest CU updates. It is running on a VMware box (Windows Server 2008 R2 Standard) with its backend on a SQL Server 2008 R2 vmware box. The farm account is a domain user and has been given all appropriate
replication rights, etc to active directory.
Everything seems to be working fine except for security integrated with AD groups. When I go to edit permissions I can add individual AD users just fine and remove them just fine and their access is taken away right away or given to them right away.
I can also find AD groups in the people picker and add them to the site. When I add new groups to AD, they are found immediately within Sharepoint, and when I delete groups from AD, they are taken out of the people picker right away. Now comes
the weird part. When I add an AD group to the site, all users currently within that AD group are given access to the Sharepoint Site. This works for the first time only. Now when I add or remove users from the AD groups, it does not update
in SharePoint. For example, I have an AD testuser1 in the AD Group "All Users". testuser1 does not have access to SharePoint. So I add the AD group to the Sharepoint group "Visitors". testuser1 now has read access to the sharepoint
site. Now, I remove testuser1 from the AD group, but testuser 1 still has access to the site even though he is not part of the AD group, nor does he have any individual permissions to the site. Now, I add testuser2 to the ad group. testuser2
does not have access to the site, even though he is part of the ad group.
It seems that the only time AD group security is working for me is when I first initially add the AD group to the site. From then on, it's like sharepoint is caching the members of the group and not updating any new adds or deletes from the groups.
Any ideas? I am lost on where to go from here as I have tried everything from clearing cache files, rebooting servers, iisresets....

I think I have at least cornered the problem, but am not 100% sure yet that it is the correct answer. I think it could be 1 of the following 2 scenarios.
Scenario 1: We have 3 web applications setup on our web server ports 80 - Our sharepoint Web app, 2020 - Our My Site Web App, 2040 - Our Search Web app. We are using host headers (http://sharepoint.***.com) instead of a server name. So
we setup our access mappings (Central Admin -> Application Management -> Configure Alternate access mappings) to use the host header (http://sharepoint.***.com) as the default mapping and the server name as the intranet access mapping. By
setting the default access mapping to host headers, i noticed that Sharepoint automatically assumes that all web apps are on port 80. You can see this by going to (Central Admin -> Manage Web Applications). The port listed all 3 web apps on
port 80. So I think when I was doing a profile sync and using mysites, it was messing with my AD security because of this. What I did was the following. I went to Central Admin -> Manage Service Applications -> [Name of your user profile
service] -> Setup my sites. I made sure that my preferred search center had the correct port number on it (mine originally had no port number), that my my site host had a port (again no port number originally), as well as the personal site location.
I then saved this.
Scenario 2: Our user profile sync had 2 BDC connections that were corrupt and throwing errors. I rebuilt the connections, remapped them to the proper user profile property.
I did both of these scenarios above around the same time. I then restarted all my servers, and at last the AD Group security is now functioning appropriately. I have done multiple IIS resets and server restarts. The issue has only reappeared
once. After restarting the machine again, we were back to the AD groups functioning correctly. Because we had the issue reappear once after doing the above, I still do not feel 100% sure that either one of the above corrected the issue completely.
As long as we are up and running currently, I am moving on to other tasks with this project. My only concern that it will break again and I will have to revisit it is when we restart the servers....which is never fun. I will update as I find
a "true" answer to this issue.... Let me know if any of the above helped you or if you find something I may not have thought of.

Planner group is not updated in service notification using BAPI

Hi,
Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
I have written the below code, but planner group is not updated in the service notification.
Please advice which parameters do i need to pass to update planner group in the service notification.
          wa_methods-refnumber      = '000001'.
          wa_methods-objecttype     = 'PARTNER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000002'.
          wa_methods-objecttype     = 'HEADER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000000'.
          wa_methods-objecttype     = ' '.
          wa_methods-method         = 'SAVE'.
          APPEND wa_methods TO i_methods.
          REFRESH i_partner.
          CLEAR wa_partner.
          wa_partner-orderid        = wa_subscr1-aufnr.
          wa_partner-partn_role     = 'VW'.
          wa_partner-partn_role_old = ''.
          wa_partner-partner        = wa_subscr1-parnr.
          wa_partner-partner_old    = ''.
          APPEND wa_partner TO i_partner.
          REFRESH i_planrgrp.
          CLEAR wa_planrgrp.
          wa_planrgrp-orderid        = wa_subscr1-aufnr.
          wa_planrgrp-plangroup      = wa_subscr1-ingpr.
          APPEND wa_planrgrp TO i_planrgrp.
          REFRESH i_planrgrp_up.
          CLEAR wa_planrgrp_up.
          wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
          wa_planrgrp_up-plangroup   = 'X'.
          APPEND wa_planrgrp_up TO i_planrgrp_up.
*----Change order details with Technician name
          CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
            TABLES
              it_methods   = i_methods
              it_header    = i_planrgrp
            it_header_up = i_planrgrp_up
              it_partner   = i_partner
              return       = i_return.
Thanks & regards,
Krishna

Try this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL.                                               " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0.                                                             " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a®

Group membership on AD-bound server is not updating correctly

I have a 10.6.4 server that is bound to AD with Win2008 domain controllers. I am seeing group membership not update properly on this OS X server. If I type "id -p username" I don't get a full list of groups the user is a member of. If I launch Workgroup Manager, all of the groups are listed. I am using the box as a Subversion server and need the group updates to propagate from AD for Apache authentication to work correctly. Any ideas as to why the propagation is not happening? Is there a way I can flush whatever cache might be causing an issue? Can the group membership list be "refreshed"?

Yes, we are using Initialization Blocks to update the User Groups. Our USER_PERMISSION table has Login, Company_ID, Roles, etc columns in it. The Initialization Block will query on this Table and the query has a where clause in it and the Where clause "where company_id=(select substr(':USER', 0, (instr(':USER', '.')) - 1) from dual) and upper(login)=upper((select substr(':USER', (instr(':USER', '.')) + 1) from dual))) and dw_delete_date is null" from which it will get the roles for each user. And YES, the Caching is turned off for this initialization block.
And I should try deleting the user folders, but my company has a very strict policy so I should do that in DEv, then QA and in PRD. Hope this works, but I am still not convinced why this is happening. We cannot keep on deleting the user folders in future if this happens again.

In material master standerd cost value not updating in group currency

hi gurus
In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue
this hapend only for one material
can you sugest me to resolve this
regards
gangadhar

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Currect me if Iam worng.
Thanks
Goutam

In material master standerd price field not updating in group currency

In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Thanks
Goutam

User and Group information not updated in Sharepoint 2010

Hi,
Recently, our orgnisation has maked update of user and group in the Active Diractory. The information was not update in the site collection. I was try to :
-recreate and synchronize a new service application ( no effect)
- Delete old database synchronisation( stsadm -o sync -deleteolddatabases 5)
- stsadm -o sync -synctiming m:5 and stsadm -o sync -sweeptiming m:5 (No effect)
-I have no error or warning whn i make the synchronisation, all data bases is started.
Anyone can help me please??
Thks

Is User Profile to SharePoint Full Synchronization job up and running? Do you see any errors when this job runs? Turn on verbose logging to see details when this job runs.
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Error "No automatic updation for IT0008. Allowance Grouping not found"

I am maintaining IT581 of an employee.but system throws an error -->No automatic updation for IT0008. Allowance Grouping not found.I have maintained allowance grouping properly.The thing is my requirement is that i am maintening pay groups and level in table T710 instead of T510.Not touched T510.
Means i have also created IT1005(Planned compensation) in OM.Every other thing is ok.Except IT581.
What i beleive is its taking assignement from table V_T7INA3.where i am not able to store ESG for CAP, groups and levels.Because its taking value from T510.But i want to do everything on basis of pay scale grade ie T710.
Need your help and inputs....

Dear Sumo,
Kindly update feature 40 ECC which will help to automatic open the IT0008 for autmatic updation of such wagetypes ex: HRA
you can maintain percentage their for the particular wagetype for
40ECS - HR-IN : Feature to Determine Elgibility for RAPS
This feature is used to determine the factor which is multiplied with
the Reimbursement, Allowance or Perk (RAP) amount to calculate the
amount payable to the employee.
rocedure
The factor can be arrived at by making a decision on the following
details:
Country Grouping
Company Code
Payscale Grouping for Allowances
Wage Type
Gender Key
Number of children for children education allowance
Number of children for children hostel allowance
Personnel Number
ample
As per company A's policy, all employees belonging to the Payscale
Grouping for Allowance MN01, receive twice the amount eligible for
Childrens' Education Allowance (wagetype M260) in case the employee has
two or more children.
1           D   MOLGA
2   **          &ELIAL=1
3   40      D   LGART
4   40 ****     &ELIAL=1
5   40 M260 D   CEANO
6   40 M260 *   &ELIAL=2
7   40 M260 1   &ELIAL=1
kindly update the same and let me know.
rgds,
priyanka

Group not updating.

Similar Messages

Maybe you are looking for