Group on BBM keeps failing!!
I just got my new 9360 about a week and a half ago, and on BBM I'm trying to start a group with just 2 other friends but it keeps deleting me, and then asking them if they want to re-invite me to my own group where I am admin!
Then I thought third time lucky, but now we are not getting each others messages one member has been told we are not connected but I can still see her messages fine and even get the notifications every time I ask her to try it! But she is seeing none of my messages, the other member during attempt two was fine until being deleted by the system, this time i cant see any of her messages, and those 2 cannot connect at all!
Everything is working fine on standard BBM, it's just trying to create a group! Why is this so hard??
Please Please Please help we are all getting fed up!
And should the other 2 members NEED to be friends on BBM in order to connect in the group?
Hello bg4estdude!
I can imagine how frustrating it must be to be unable to reply to group messages! What make & model phone do you have? When did this begin? What is the exact error message it is giving you? I'd be happy to help you figure out what's going on.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
Every time I send an email out it keep failing.. why is that?
hello there.. every time I send an email out it keep failing.. why is that and what do I have to do to fix this problem?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom -
Hi guys,
we created a custom WIM Image (Windows 8 Enterprise) with MDT 2012.
Sysprept the Image, Deployed via SCCM 2012 SP1.
Computers are Domainjoined. Error with standard Domain User.
On some computers (not every computer) and not with every user on the first logon following error message arises:
The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported
It works, when you log in a second time but this error isn't very nice.
Is there a solution for that?
Kind Regards
MartinHi,
The service is responsible for applying settings configured by administrators for the computer and users through the Group Policy component. This issue can be caused by various reasons based on the computer environment.
Can you find any information in event log about this issue?
Here is the related blog in which the steps can solve most of such issues if the issue continuously happen.
http://blogs.msdn.com/b/moiqubal/archive/2012/03/04/how-to-fix-quot-the-group-policy-client-service-failed-the-logon-access-denied-quot-error.aspx
Also, you can refer to the similar thread about this issue:
http://social.technet.microsoft.com/Forums/en-US/4a644219-50ee-494d-b965-e64a8555109e/the-group-policy-client-service-failed-the-signin-the-universal-unique-identifier-uuid-type-is
Since this issue can be related to SCCM, to better help you, please submit a new thread for further help:
https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
Hope these could be helpful.
Kate Li
TechNet Community Support -
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
IPad not recognized by iTunes, recovery keeps failing.
I have not yet seen a real suggestion as to troubleshooting steps for this issue on these discussions.
The iPad is not recognized by any MB Pro except in recovery mode. I have tried different cables and different ports on different laptops. iPods are recognized. iPad works normally otherwise. Recovery keeps failing. After sitting in recovery mode for a few minutes, the iPad either shuts off or goes back to normal operating mode.
iPad recognized sometimes by iPhoto.
I've tried all the stupid suggestions support had; erase and reinstall, remove iTunes and all files,
reinstall. (Dumb because the issue occurs on all MB Pros)
No one has had any answers on this issue on any posts on discussions.
iPad phone support keeps transferring me to MB Pro support (who's only TS answer to any problem is erase and install) who transfer me back to iPad who only know recovery and "I've never seen this problem before" or "it should work"
So, what is next? Wait and see if Microsoft comes up with a working product?On my iMac-22" , I encountered the same problem with a 3G iPad/ 64 GB .
Tried iPad-reboot , and resetting prefs. etc., other cables ,and iPhone & iPods were recognize but iPad was not.
Tried re-installing iTunes , but after connecting - no Pad.
Did a reset and the connection-symbol didn't show on th IPad screen... instead
it went straight to black , or operarting /Home screen .
I had the Pad a week, and only sync-ed it once before ( though I did
break off an automatic upload of my entire iTunes Library , changing it to manual picking ,but transferred fine on to the Pad ).
Good to read similar (or same?) problem ; indeed :
not many Forum-subjects on this yet.
I'll update and answer on here after resolving.
thanks -
Error Message when logging on "The Group Policy Client service failed the logon. Access is denied"
Since the move to Windows 7 we have started getting this error above when people login at random times and on random machines, at first we thought it was only a select few users, but now it seems to have occurred to about 20 different Staff members working
at the school. Also of those 20 odd users it has happened to them on a few occasions.
What we know
We know this problem is only occurring to staff with Roaming Profiles, it seems like somehow the profile is not Synchronizing with the Servers File Share that houses the profiles, which causes the NTUSER.DAT file to become corrupt and go from being around
2 – 3 MBs to 256KB (In all cases where a user has had this issue there NTUSER.DAT file has been 256KB)
Current Resolution to the problem
When a staff member contact us with this problem, we fortunately have Previous Versions working on the profiles folder on the server, so we are able to restore their NTUSER.DAT file from 1 to 2 days before it became corrupt, which then seems to allow them
to log on fine
What we have tried so far & suggested so far
After some research on Google, we found the following thread on EduGeek
http://www.edugeek.net/forums/windows-7/78733-windows-7-user-profile-failed-error-again.html#post700415
Which suggested that the problem may lay within registry, so we implemented the Script that was posted on the website, however this has not seemed to make any difference
In the early stages when only 5 – 10 staff seemed to be having the problem, we believed the issue could be with just certain AD accounts. It had not seemed to happen to any recently created AD accounts so we thought it could be a corrupt attribute on
the user so we delete one of the staff AD accounts that had the problem and creating a brand new one, however within about 2 – 3 weeks that staff member had the issue occur again
Leading on from point two, we also thought the problem could be with people using multiple computers, logging on in 2 places and not logging off properly, but unfortunately the staff member referred to in point 2 only uses the one computer in reception.
Another potential cause that we figured might be the route of the problem, was it could be specific computers that are not communicating properly with the server, which could be causing this problem to occur, but we have no real way of testing this,
as the staff generally log onto 3 – 4 different computers throughout the day and in different location
We log a call with EE and they just pointed us to various websites that we had already checked and wasn’t much help.
In Summary
This error has now occurred with about 20 members of staff, we currently only use Windows 7 at our Senior School & Moving to Windows 7 at our Prep School in the Summer
holidays, we would like to find out the route of this problem ideally before then, as we could potentially be doubling the amount of staff with the problem after the move. Has anyone else seen this problem or have a brain wave on how to solve it?
Regards
AndyHi Dudleya,
First of all ,I would suggest to check the permissions of the NTUSER.DAT registry hive .Here is a link for reference :
The Group Policy Client service failed the logon. Access is denied(Juke Chou`s answer)
https://social.technet.microsoft.com/Forums/windows/en-US/8c0054a3-35be-4fc4-839c-e2176613eb23/the-group-policy-client-service-failed-the-logon-access-is-denied?forum=w7itpronetworking
Please refer to this link and add the registry keys to have a check .Please backup the registry keys before you made modifications to them.
The Group Policy Client Service Failed The Logon In Windows 8(It should also work on windows 7 )
http://www.thewindowsclub.com/fix-group-policy-client-service-failed-logon-windows-8
If the issue persists ,we can refer to this link to troubleshoot this issue .
Troubleshoot User Profiles with Events(It should also be applied to windows 7 )
https://technet.microsoft.com/en-us/library/jj649075.aspx
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards -
Group Policy Client service failed! Help!
A few days ago I was booted out of my account, while watching a DVD. My system restarted itself, but not before flashing some sort of blue screen. Unfortunately I was unable to read the content of it. After restarting, I was presented with a light blue login screen, instead of my normal screen. However, my name and profile picture remained the same. I was able to login with my password, only to be informed that I had been set up with a temporary account. I was unable to access my files, and had no idea how to access my regular account. After logging out, and restarting in hopes that it would go back to normal... my system went into recovery mode, and afterwards presented me with the same temporary account login screen. Only this time, I was unable to login. Instead I received "The Group Policy Client service failed the logon. Access denied" message. I'm the only user (administrative), and my computer has no internet connection. So, I'm not sure if this is a simple error; a result from my low capacity battery needing to be replaced, or a virus. I've checked previous forums, but I've had no luck. I can't login to my computer at all, and it's very frustrating. I've also backed up my files, just in case my system has to be restored to its factory settings (I hope not). Could any one tell me how to resolve this? Please!
- Frustrated (Pavilion dv6-1350us) UserHello @chigi93 ,
Welcome to the HP Forums!
I understand you were booted from your account and can now only log in with a temporary account.
Windows does this when the main account is unavailable. The account most likely needs to be repaired.
Please follow this document to fix a corrupted profile: Fix a corrupted user profile.
If that doesn't work please go through this document: You receive a "The User Profile Service failed the logon” error message.
Let me know if that works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
The Group Policy Client Service Failed The Logon
Hello,
When our students login to our Windows 7 machines they are getting this error:
The Group Policy Client Service Failed The Logon
Access is denied.
We are attempting to use both volatile and roaming profiles. The profiles are being stored on their H drives. I seem to only see the issue when the Windows NT 6.1 Workstation Profile.V2 folder already exists on their H drive. If the profile is not there then everything works fine.
Loading the user's ntuser.dat hive located in their H drive and changing the permissions manually to allow System, Administrators, and Users Full Control fixes the issue. How can I do this across all my user's H drives? Should I just delete them all and manually create the folder myself?
Last time I found one, the permissions for the hive had an "Unknown" user in the permissions list. There was no "Users" group. Removing the "Unknown" and adding "Users" fixed the problem. Are the permissions getting corrupted somehow?
Thanks for any assistance.
I've used the following link for reference:
Support | Windows 7 Roaming Profiles fail - user is assigned a temporary profile or fails to log on
Novell Doc: ZENworks 10 Configuration Management Policy Management Reference - Assigning a Roaming Profile Policy that has the User Profile Stored on a Home DirectoryOriginally Posted by coreyhansen
So it appears that I am experiencing the temporary profile detailed in my link I referenced above. I have status bubbles disabled by policy and didn't notice the notification. I'm going to try pre-populating my user H drives with the Windows NT 6.1 Workstation Profile.V2 folder containing an ntuser.dat file I've already edited the hive permissions of. This worked in small scale testing, so we will see.
I've been referencing this thread: http://forums.novell.com/novell-prod....html#poststop
So I have tried this with students that are experiencing the problem, and gotten limited success. It feels like it works at random, with around 50% of attempts working.
Has anyone out there had success with roaming profiles? Do I just need to go back to folder redirection? Will anyone please respond?
This is what the student's ntuser.dat hive permissions look like when things are not working: -
Group Policy Client service failed the sign-in
After doing an OSD with a Windows 8.1 reference image, I get the "The Group Policy Client service failed the sign-in. The Universal unique identifier (UUID) type is not supported." message. It only shows up on the first very first log in, right
after the OSD process has completed, and never shows up again. I'm using basic OSD task sequences right now, but I'm not sure where to pinpoint the cause of this message.Hi,
This is only happening when we use the original RTM ISO en_windows_8_1_enterprise_x64_dvd_2791088.iso
(without any software update), if we instead use the en_windows_8_1_enterprise_x64_dvd_2971902.iso the error is gone.
Apparently this ISO is updated with the
Windows 8.1 and Windows Server 2012 R2 General Availability Update Rollup
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!
Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck… -
Flash Player keeps failing in safari
I am using mac OS X Yosemite.
For some unknown reason flash keeps failing in safari, but works in chrome. I can't seem to resolve this issue, This is what I tried so far from answers I received in the apple support forums:
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
We have also run diagnostics on my mac but could not resolve this and eventually I was told the only thing left to do is seek support from adobe.
Please help!alright, also, I saw that in those instructions it tells me to delete these:
<home directory>/Library/Preferences/Macromedia/Flash\ Player
<home directory>/Library/Caches/Adobe/Flash\ Player
now I can't find any of that stuff but I did find two files called com.macromedia.Flash Player.plugin.sb
in the library sub folders. should I delete them? -
Windows 8.1 update with KB2919355 keeps failing
hi,
I'm trying to get my Windows 8.1 updated with KB 2919355 but it keeps failing with error code E0000100.
I've tried tried to resolve using the "clearcompressionflag" tool, but that had no effect. The update will install but after reboot of machine, the update fails.
I'm running 64 bit and the pc is upgraded from Win 7 then Win 8 and finallly Win 8.1.
Please help.
Thanks
MarcWindowsUpdate.log is here:
Aha. I think we are going to need a previous piece of the CBS.log. This KB2919355 is so huge that it seems to have wrapped the one that you are showing us. I.e. I suspect the most interesting piece of it will reflect what happened to produce
this event (or an earlier one of the same code 0xE0000100)
2014-08-12 16:55:42:109 1060 f54 Report REPORT EVENT: {AF27B9C6-D4EB-4CB5-86C3-1779B31F5941} 2014-08-12 16:53:00:527+0200 1 195 [AU_SCHEDULED_INSTALL_FAILED] 101 {26E2A7EE-34D5-4161-AB79-56625337046F} 207 e0000100 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0xe0000100: Windows 8.1 Update for x64-based Systems (KB2919355).
2014-08-12 16:55:42:139 1060 f54 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-08-12 16:55:42:329 1060 f54 Report WER Report sent: 7.9.9600.17092 0xe0000100(0) 26E2A7EE-34D5-4161-AB79-56625337046F Install 101 Unmanaged
2014-08-12 16:55:42:350 1060 f54 Report CWERReporter finishing event handling. (00000000)
2014-08-12 16:55:56:986 1060 ae4 Driver Matched driver to device PCI\VEN_1002&DEV_9640&SUBSYS_77481462&REV_00
2014-08-12 16:55:57:001 1060 ae4 Driver Status: 0x180200a, ProblemNumber: 00000000
Unless that driver information is enough of a clue to help you devise a workaround? What is that device? You could use WMIC (or Powershell) to find out more.
E.g. try
wmic Path CIM_SystemDevice where (__RelPath like "%Ven_10%") get PartComponent
I'm sure we could find something more specific but that gives you an idea I hope.
You can do a Find in your WindowsUpdate.log for Installation Failure: to see that there is a definite pattern to the failure reports: 4 install errors and 1 download failure then 1 install error and 1 download failure.
So I suspect that the last ones, for the download failure, or even the quick install error is not going to be as interesting as the first of a set of 4. E.g. those later ones may just be the server throwing up its hands and saying: Go
away! (figuratively speaking, of course.)
Of course I may be completely off the mark here with such speculation, so you may prefer to leave it to Darrell to choose what he wants to look at. Thanks for both diagnostics. I think they will help.
Robert Aldwinckle -
Trying to install OSX Yosemite but it keeps failing - how can I tell if my iMac is too old? Curently running OS x 10.6.8
Hold on.
7,1 is a mid 2007 model (20 or 24")
It can run Yosemite, make sure that you have at least 4GB of Ram. -
How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.
Maybe you are looking for
-
BEWARE: if you subscribe to AOL'S cyber newspaper (for 99¢ per week),you will have to give them authorization to charge your account weekly vain iTunes/apple account or credit card or bank account. Once you do that you have a better chance having a
-
Can no longer change bit rate in AAC custom import settings
I've been re-ripping all my CDs at the new higher bit rate. My import settings were AAC Encoder -- custom, originally set to 256 kbps, VBR, and auto for the other two settings. However, some CDs I wanted at a lower setting, so I would go change the b
-
IMac does not recognize digital video camera plugged into USB port
Hi Everyone, I received a Kodak Zi8 digital video camera as a gift recently. I was told it was compatible with macs. When I plug the camera into the USB port of the mac it doesn't recognize that it is there. I read on one discussion board to turn the
-
How Do I determine what AP Group an AP Belongs to with WCS?
I am running WCS 7.0.164 and I can't seem to find where I can determine what AP Group an AP belongs to. Can anyone point me in the right direction? i'd expect it to be a field under Monitor/Access Point but I don't see it and my google-fu is getting
-
I may be the only one here but i philosophically see all iOS firmware as work in progress but one none the less that leads from the front. In saying this i wish to make known and get feedback from others of my thinking on best practice for the Mobile