Group Policy help w/ Links In IE
Does anyone know what policy setting allows users to rearrange the
shortcuts in links toolbar within IE? I can't seem to find it. Users
try rearranging the shortcuts but they go back to alphabetical order
after logout and log back in.
Thanks,
Johnny V.
johnnyv5
johnnyv5,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Group Policy Helper tool not working properly
Hello,
I`m using IE 9 on a x64 Win 7 enterprise PC with ZCM 10.3.4.
When Im logging into ZCC and start to configure a "windows group policy" the group policy helper tool starts and begins to download the policy.
Then the gpedit.msc appears i get the popup "group policy settings imported successfully" immediately. This popup should certainly come up, when i close the gpedit.msc to import the changed policy setting.
But so i always get an empty policy for upload.
Any hints what`s wrong with it?!Originally Posted by andreas_karl
Hello,
I`m using IE 9 on a x64 Win 7 enterprise PC with ZCM 10.3.4.
When Im logging into ZCC and start to configure a "windows group policy" the group policy helper tool starts and begins to download the policy.
Then the gpedit.msc appears i get the popup "group policy settings imported successfully" immediately. This popup should certainly come up, when i close the gpedit.msc to import the changed policy setting.
But so i always get an empty policy for upload.
Any hints what`s wrong with it?!
IE 9 is not supported, you need to stay on IE8 until 11.2 is released (15 march).
Thomas -
Group policy helper and Folder Redirection
I've installed windows7/32 bit to use the Group policy helper. Now I can use this tool.
I want to use the Group policy helper to redirect folders as descripted in Managing Roaming User Data Deployment Guide.
In this documentation a folder redirection management snap.in is used. Can I somehow include this in the grouppolicy helper in ZCC11?
I want to redirect the user folders to their homedirectory. We have about 500 Students and I can't configure every login so I hope to solve the problem using the group policies.
(with zen7 and XP we configure the default local user to move desktop and user files to NetWare Home directory.)This still works..........
http://www.novell.com/coolsolutions/tools/14324.html
On 7/27/2011 7:56 AM, Alix wrote:
>
> I've installed windows7/32 bit to use the Group policy helper. Now I can
> use this tool.
>
> I want to use the Group policy helper to redirect folders as descripted
> in 'Managing Roaming User Data Deployment Guide'
> (http://technet.microsoft.com/de-de/l...9(WS.10).aspx).
>
> In this documentation a folder redirection management snap.in is used.
> Can I somehow include this in the grouppolicy helper in ZCC11?
>
> I want to redirect the user folders to their homedirectory. We have
> about 500 Students and I can't configure every login so I hope to solve
> the problem using the group policies.
>
> (with zen7 and XP we configure the default local user to move desktop
> and user files to NetWare Home directory.)
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Deploying Files with Group Policy - Help Needed
Hi,
I am trying to use group policy to deploy files and folders to our server estate. The policy I have created first creates a folder on each server's C drive and then coppies a set of files to this folder from a network share. The folder creation works fine
but the files copy fails. In the Application logs on the servers it displays the following error:
The computer 'ILMT' preference item in the 'GPO - Servers_Production_ALL {CC026B58-FA3B-4399-AA00-AE8E844B2B47}' Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
Can anyone advise what exactly does not have access here? I don't know what I need to enable to get this to work.
Can anyone help?
Many thanks
JamesThe copy is on a file server share. presumably if I just give everybody read access to the share that would suffice?
No it won't.
"Sharing" requires several actions:
a) create the folder
b) share the folder
c) grant NTFS permissions on the folder
I think you've neglected action (c).
For your scenario, you need to grant the "server computers" read permissions to the folder.
You can add individual computer accounts, or a group, or "domain computers".
(In a similar way, you could grant access to a user, a group, or "domain users")
[if you need everybody (users) *AND* everything (computers), you could grant permissions to "authenticated users" since that principal includes *BOTH* users and also computers]
Note that "domain computers" and "authenticated users" include all types of domain member computers, i.e. servers, workstations, etc.
Also, note that granting a "computer account" access to a folder or share, does *NOT* mean that a user account on that computer can access the remote share, i.e. permission is granted to the computer account, and a logged-in user account on
that computer does not inherit any kind of access to the remote share by virtue of being logged in.
This means that the computer can access the share but the user cannot access the share. Because the computer account is an identity/principal of it's own accord.
[None of which really has anything to do with Group Policy at all - it's how Windows does file sharing and ACLs... ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Demoting a DC and Group policy, help needed.
Hi all,
so we have 3 domain controllers, lets say dc1,dc2 and dc3. We have the 3rd line assistance from another company, they have advised the following....
SO the stages will be
1) Can you please go through all the GPO's in DC3 and consolidate what you need and what you do not need, you need to extensively cross reference this with DC1 and DC2, this is something you have to do. As I will not know what you need and what you do
not. You can do this by logging into each domain controller and opening up the settings of each GPO and cross referencing.
2) Once the above is done, we will consolidate the GPO's to a central repository in your domain
3) Backup Sysvol directory and Netlogon folder in DC3
3) Proceed to dcpromo DC3 out of the domain
4) Test connectivity if clients to the AD
5) Add the additional Server options
6) All of the above can be done during office hours.
it was my understanding (perhaps wrongly) that the group policies were not on the individual Domain Controllers but in Sysvol and as such replicated anyway?
any advice would be very much appreciated.> I am being told that our Group policies are different across different
> Domain Controllers and to my knowledge that's impossible as we have
> discussed it should be in the replicated Sysvol.
Ok, that's a common problem. Fix it and you will be fine:
http//support.microsoft.com/kb/2218556 (for DFS-R Replication of Sysvol)
http://support.microsoft.com/kb/315457 (for NTFRS replication)
> I'm a bit lost on the central repository aspect but prior to saying it
> makes no sense I just wanted to check my understanding, especially with
> an MVP!
I agree. Talking of a "central repository" fro group policy doesn't make
sense, because group policy from the very beginning lives in AD and
sysvol, which both are kind of "central repository". Seems they don't
really know what they're talking about :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Power settings/group policy/help!
Hello again,
We use Dell laptops in our business, primarily a selection of Latitude E6230s. E6330s, a few E7240s, and some others.
There is the well known issue with Dell laptops that when they are plugged onto a docking station when they are already powered on, they completely freeze up and lose all USB support. I have read up on this online and everywhere suggests setting the default
domain policy to a High Performance power plan.
I have done this, however now we have a bunch of remote workers complaining that their laptop batteries are draining too quickly, and the machines are getting too hot and too noisy, because the machines now never go into sleep/hibernate mode.
Has anyone got any ideas on how to obtain a happy medium for this? I'm getting grief from both sides and there isnt enough hours in the day to sit and play around with all the individual settings - although I suspect that I might have to?
Any advice would be much appreciated?
Thanks!Hello aglxs20,
How about the Windows 7 restore disk?
Is this issue resolved?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Renamed Domain - Clients Still "joined" to old domain, can't open Group Policy Management on Server
Performed a Domain Rename as per the following instructions:
http://www.bauer-power.net/2011/05/renaming-windows-domain-with-rendom.html#.U4OZRPmSyTM
and then after these issues I have gone through the related technet articles starting here:
http://technet.microsoft.com/en-us/library/cc794793(v=ws.10).aspx
specifically the Fix Group Policy Objects and Links.
But still I have the following issues:
At least for group policy clients believe they are on the old domain - despite even having renamed the computers with the new domain name.
When I perform a gpresult the output file shows as being connected to the old Domain - despite manually going into computer properties and renaming the computer with the new domain name...
CN=Allister Wade,OU=Users,OU=Home,DC=NEWDOMAIN,DC=local
Last time Group Policy was applied: 27/05/2014 at 5:36:31 AM
Group Policy was applied from: finch.newdomain.local
Group Policy slow link threshold: 500 kbps
Domain Name: OLDDOMAIN
Domain Type: WindowsNT 4
On the server I cannot open Group Policy Management on the single Domain Controller as it is looking for a DC on the old Domain:
Even though it has listed the new domain in the root of the management console when I attempt to expand it out I am prompted:
"The specified domain controller could not be contacted. This affects the following domain in the console.
Domain: olddomain.local
The error was:
The specified domain either does not exist or could not be contacted."
I can select to remove the domain from the console but this does nothing - as said it already shows the new domain in the console.
Far as I am aware the clients should not even of needing renaming or changing the domain, but were having authentication issues before I did this. Not sure what I have done wrong here..?Client's NSLookup shows "UnKnown" as DNS Server so thought to check DNS out.
This is result of dcdiag /test:DNS.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = finch
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\FINCH
Starting test: Connectivity
......................... FINCH passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\FINCH
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... FINCH passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : NEWDOMAIN
Running enterprise tests on : NEWDOMAIN.local
Starting test: DNS
Test results for domain controllers:
DC: finch.NEWDOMAIN.local
Domain: NEWDOMAIN.local
TEST: Delegations (Del)
Error: DNS server: finch.olddomain.local. IP:<Unavailable>
[Missing glue A record]
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 203.12.160.35 (<name unavailable>)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 203.12.160.35
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: NEWDOMAIN.local
finch PASS PASS PASS FAIL PASS PASS n/a
......................... NEWDOMAIN.local failed test DNS -
IE10 - Technical Issues Group Policy
Hi,
Microsoft connect have asked me to raise this issue here - can someone assist with a Bug Hotfix please?
http://connect.microsoft.com/IE/feedback/details/790635/managing-internet-explorer-10-using-a-domain-gpo
IEfeedback bug 62637
Many thanks
Peacereposted from
http://community.spiceworks.com/topic/342202-ie-10-group-policy-help-needed-i-think-i-ve-found-a-bug
We have a Windows 2012 DC and I am using Group Policy Management to configure Internet settings for IE 7, 8, 9 and 10 users.
The group policy settings for IE 7, 8, 9 work fine. I can configure the Proxy Server settings and the Advanced Settings with no problems. However, I think I have found a bug when trying to configure the Proxy Server settings for IE10. Here
is what I do.
1) Go into Group Policy Management
2) Select the Group Policy Object that I want to add the IE10 settings to.
3) Edit the Group Policy Object
4) When Group Policy Management Editor opens, I go to User Configuration /
Preferences / Control Panel Settings /
Internet Settings. Here I see the "Internet Explorer 7" and the "Internet Explorer 8 and 9" settings that I have already created. I
right click in the right hand pane, select "New", then select "Internet Explorer 10".
5) With the "New Internet Explorer 10 Properties" window open, I go to the "Connections" tab, select "LAN Settings".
6) Check to enable the "Use a proxy server...." option
7) Enter the ip address of my proxy server and the port address, in this case I enter "192.168.160.22" and "8080"
8) Press "F5" so the settings get applied to all users as indicated by the solid green line.
9) Check to enable the "Bypass proxy server...." option
10) Click "Ok", then click "Apply", then click "Ok" to save the changes. I now see the Internet Explorer 10 listed along with the IE 7 and IE8and9.
11) Double-click the Internet 10 option to go back into its "Properties".
12) Select the "Connections" tab, then "LAN Settings". I see the proxy ip address and port number that I entered in step 7 above.
13) Now the wonderful part where I think there is a bug. Click "Advanced". This opens the "Proxy Settings" window.
14) Move the window over so you can see the "Local Area Network (LAN) Settings" window.
15) Click the "OK" button in the "Proxy Settings" window and
watch the proxy ip and port numbers in the LAN Settings window disappear.
16) So you think to yourself, ok they must still be there. If you click "Cancel" and go back into the "LAN Settings" you will see the proxy server ip address and port number still there.
But if you click "OK", and then "Apply" your screwed.
The proxy server ip address and port numbers never reappear when you go back into "LAN Settings". To get the proxy server ip address and port numbers to reappear, you have to recreate the Internet Explorer 10 settings, but going
into the "Advanced" settings will burn you every time.
Doing the above when setting the IE 7 and IE 8and9 settings works fine.
See the attached image showing what I see.
Anyone else experience this? Have you found a way around it?
Thank you for your time and help.
Thank you.
Rob^_^ -
The first, most important question of this thread is if I can form a wireless domain or if I have to do it wired.
If it matters, I have a Linksys E1200 router that does wireless and wired.
My second question refers to Group Policy. Is this the way domains limit their user account's capabilities? Because I was planning on making a domain, so that I could have unified user accounts that I could control from the server, limiting what those accounts
can access for further security. Is this what Group Policy does, and how would I move with starting that?Hi Adrian,
>>The first, most important question of this thread is if I can form a wireless domain or if I have to do it wired.
Just as Alan suggested, Active Directory domains support both wired and wireless connections.
>>My second question refers to Group Policy. Is this the way domains limit their user account's capabilities?
Group Policy is an infrastructure that allows you to implement specific configurations for users and computers. Group Policy settings are contained in Group Policy objects
(GPOs), which are linked to the following Active Directory directory service containers: sites, domains, or organizational units (OUs). The settings within GPOs are then evaluated by the affected targets, using the hierarchical nature of Active Directory.
Consequently, Group Policy is one of the top reasons to deploy Active Directory because it allows you to manage user and computer objects.
Regarding group policy, the following link and articles can be referred to for more information.
Group Policy for Beginners
http://technet.microsoft.com/en-us/library/hh147307(v=WS.10).aspx
Group Policy Planning and Deployment Guide
http://technet.microsoft.com/en-us/library/cc754948(v=WS.10).aspx
Group Policy
http://technet.microsoft.com/en-us/windowsserver/bb310732.aspx
Best regards,
Frank Shen -
Need help in setting up Group Policy for same user in local system and Terminal server
Hi All,
Currently our remote users are using our network using VPN client over internet.
They are generally at their home computer and doing VPN as they have to work only in one RDP server for application.
We actually have a OU created for these RDP users and assign then some strict policy like they can not use any other .exe,they can not user any explorer ,they can not even use windows explorer when they are on RDP they just use one exe of their application.
Now what my management want is they want their home computers in Domain and want them to login via their same credentials they are using for RDP but they don't want them to restrict in their home computers with any strict policy.
Now my confusion is how can I configure different policies for same users or same OU.
Can any one guide me please...you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
Request for Sticky #2 - Advanced Group Policy Troubleshooting Help
GPOMG!
Group Policy driving you crazy? Here are some advanced troubleshooting tools (beyond RSOP, GPRESULT, etc.) that may be helpful. For first level troubleshooting, check out this link:
http://technet.microsoft.com/en-us/library/cc787386(v=WS.10).aspx
EVENT VIEWER (NEW & IMPROVED!)
Event viewer in Windows 7 has more detail about Group Policy. Start your event viewer (may need to run as an admin. account). Navigate to:
Applications and Services Logs>Microsoft>Windows>GroupPolicy>Operational
Here you will find events that are related to Group Policy processing. You can determine how long it takes to run the various pieces of your particular GP as well as diagnostic information that can be very helpful when trying to figure out what is happening
with GP.
http://technet.microsoft.com/en-us/library/cc749336(WS.10).aspx
Events 4016 and 5016 show the start and end of processing of groups of policies, including how long it took to apply each one in the end event.
Event 5312 shows policies that will be applied, and 5317 shows policies that are explicitly filtered out.
Events 8000 and 8001 respectively show the total processing time for computer boot and user boot GP processing, and 8006 and 8007 show the same for interim/periodic GP processing.
GPLOGVIEW TOOL
A similar tool is called GPLOGVIEW. You must run this from the elevated command prompt. It will produce a XML, HTML, or simple text file of the GP events for export and review. You can even do a live monitor while you run GPUPDATE /force.
http://technet.microsoft.com/en-us/magazine/dd315424.aspx
GPSVR/GPSVC LOG FILE
If the normal tricks above don’t provide you with enough information, this should do it! There is a service called
GPSVR that gives you everything you ever wanted to know about Group Policy running on your workstation. Here is how to get more information from the GPSVR service in Windows 2008/Visa/Win 7.
Step 1: Enable logging in the Gpsvc.log file. To enable logging in the Gpsvc.log file, follow these steps:
Click Start, click Run, type regedit, and then click OK (might want to backup your registry first).
Make sure that you have the folder %windir%\debug\usermode, if the usermode folder is not there, then manually create it.
Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion
On the Edit menu, point to New, and then click Key.
Type Diagnostics, and then press ENTER.
Right-click the Diagnostics subkey, point to New, and then click DWORD Value.
Type GPSvcDebugLevel, and then press ENTER.
Right-click GPSvcDebugLevel, and then click Modify.
In the Value data box, type 30002 (as hex), and then click OK.
Exit Registry Editor.
Reboot machine.
At a command prompt, type the following command, and then press ENTER: gpupdate /force
You will find the Gpsvc.log file in the following folder: %windir%\debug\usermode
Step 2: I use Notepad ++ to analyze this log file. It can help you troubleshoot, step, by step what GP is doing as your workstation/user is getting logged in. Timing, access/permission issues, SID information and more are all included
in this log file.
Step 3: When you are done, change the value of HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Diagnostics|GPSvcDebugLevel to 0x00000000 to disable the debug log or else it will continue to grow.
Charlie NewmanHi,
I have posted an MST file which fixes this and other issues to the following thread here:
http://forums.adobe.com/message/2697135#2697135
Please post any feedback to that thread!
Kind regards,
Chris Hill -
Please Help| group policy site failure
hey all, i have some big problem in my network.
i have 3 site named by city.
tel aviv-server 2012
beer sheva-server 2008r2
netanya-server 2008 r2
i crete gpo(computer management) that deny access to mmc.exe
computer management--->windows settings--->securtiy--->file system
and add---> %systemroot%/system32/mmc.exe and deny access to user.
now i go to check the gpo in client side with gpresult /scope computer /r and see that some computers in tel aviv site connected to netanya/beer sheva site.
what can i do ?
i have a situation that not matter what i do i cant release mmc.exe to users.Hi eranvak,
Before going further, would you please let me confirm something more? Would you please descript how you configure
the group policy summarily? For example, when you create the GPO, where the GPO link to? Did you directly link GPO to the default Domain? Or in GPMC, right click the site and select
Link an Existing GPO…? Or any other I misunderstand, please feel free to let me know.
In addition, you descript “enable the inheritance option”, did you mean that just uncheck
Block Inheritance option?
Sorry for my confusion. Thanks for your understanding.
There are two articles for Group Policy Inheritance. Please refer to.
Group Policy Inheritance
http://technet.microsoft.com/en-us/library/cc739343(v=ws.10).aspx
Managing inheritance of Group Policy
http://technet.microsoft.com/en-us/library/cc757050(v=ws.10).aspx
Hope this helps.
Best regards,
Justin Gu -
I can't determine how a group policy is being applied. Please help. Thank you.
Hi,
I'm having a problem trying to find how a particular policy is being applied on my domain (I've inherited this domain). When ever a user logs into a domain, the computer get's a new local group policy. One particular attribute is that the local
admin account get's renamed:
I can't figure out where it's coming from. I've run gpresult, and I'm assuming it's the default domain policy.
But when I go to the domain controller and look at the default domain policy, the entry is empty:
I'm really at a loss. However, I really don't think it's the default domain policy, but I can't figure out what else it could be?
Any help would be greatly appreciated. Thanks!!! -TimDoes this help
C:\Users\***>gpresult /z
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 2/12/2015 at 1:57:06 PM
RSOP data for ****\*** on H9MHD12 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\***
Connected over a slow link?: No
COMPUTER SETTINGS
CN=H9MHD12,CN=Computers,DC=***,DC=com
Last time Group Policy was applied: 2/12/2015 at 1:03:12 PM
Group Policy was applied from: ***.***.Com
Group Policy slow link threshold: 500 kbps
Domain Name: ****
Domain Type: Windows 2000
Applied Group Policy Objects
Default Domain Policy
Local Group Policy
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
H9MHD12$
Domain Computers
System Mandatory Level
Resultant Set Of Policies for Computer
Software Installations
N/A
Startup Scripts
N/A
Shutdown Scripts
N/A
Account Policies
GPO: Default Domain Policy
Policy: MaximumPasswordAge
Computer Setting: 42
GPO: Default Domain Policy
Policy: MinimumPasswordAge
Computer Setting: N/A
GPO: Default Domain Policy
Policy: LockoutBadCount
Computer Setting: N/A
GPO: Default Domain Policy
Policy: PasswordHistorySize
Computer Setting: 1
GPO: Default Domain Policy
Policy: MinimumPasswordLength
Computer Setting: N/A
Audit Policy
N/A
User Rights
N/A
Security Options
GPO: Default Domain Policy
Policy: PasswordComplexity
Computer Setting: Not Enabled
GPO: Default Domain Policy
Policy: ClearTextPassword
Computer Setting: Not Enabled
GPO: Default Domain Policy
Policy: ForceLogoffWhenHourExpire
Computer Setting: Not Enabled
GPO: Default Domain Policy
Policy: RequireLogonToChangePassword
Computer Setting: Not Enabled
GPO: Default Domain Policy
Policy: NewAdministratorName
Computer Setting: Enabled
N/A
Event Log Settings
N/A
Restricted Groups
N/A
System Services
N/A
Registry Settings
N/A
File System Settings
N/A
Public Key Policies
N/A
Administrative Templates
GPO: Local Group Policy
KeyName: Software\Policies\Microsoft\Windows\ScPnp\EnableScP
nP
Value: 0, 0, 0, 0
State: Enabled
USER SETTINGS
CN=*******,OU=Users,OU=Corporate,OU=***,DC=***,DC=com
Last time Group Policy was applied: 2/12/2015 at 1:33:14 PM
Group Policy was applied from: ***.***.Com
Group Policy slow link threshold: 500 kbps
Domain Name: ***
Domain Type: Windows 2000
Applied Group Policy Objects
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
The user has the following security privileges
Bypass traverse checking
Manage auditing and security log
Back up files and directories
Restore files and directories
Change the system time
Shut down the system
Force shutdown from a remote system
Take ownership of files or other objects
Debug programs
Modify firmware environment values
Profile system performance
Profile single process
Increase scheduling priority
Load and unload device drivers
Create a pagefile
Adjust memory quotas for a process
Remove computer from docking station
Perform volume maintenance tasks
Impersonate a client after authentication
Create global objects
Change the time zone
Create symbolic links
Increase a process working set
Resultant Set Of Policies for User
Software Installations
N/A
Logon Scripts
N/A
Logoff Scripts
N/A
Public Key Policies
N/A
Administrative Templates
N/A
Folder Redirection
N/A
Internet Explorer Browser User Interface
N/A
Internet Explorer Connection
N/A
Internet Explorer URLs
N/A
Internet Explorer Security
N/A
Internet Explorer Programs
N/A -
Group Policy Client service failed! Help!
A few days ago I was booted out of my account, while watching a DVD. My system restarted itself, but not before flashing some sort of blue screen. Unfortunately I was unable to read the content of it. After restarting, I was presented with a light blue login screen, instead of my normal screen. However, my name and profile picture remained the same. I was able to login with my password, only to be informed that I had been set up with a temporary account. I was unable to access my files, and had no idea how to access my regular account. After logging out, and restarting in hopes that it would go back to normal... my system went into recovery mode, and afterwards presented me with the same temporary account login screen. Only this time, I was unable to login. Instead I received "The Group Policy Client service failed the logon. Access denied" message. I'm the only user (administrative), and my computer has no internet connection. So, I'm not sure if this is a simple error; a result from my low capacity battery needing to be replaced, or a virus. I've checked previous forums, but I've had no luck. I can't login to my computer at all, and it's very frustrating. I've also backed up my files, just in case my system has to be restored to its factory settings (I hope not). Could any one tell me how to resolve this? Please!
- Frustrated (Pavilion dv6-1350us) UserHello @chigi93 ,
Welcome to the HP Forums!
I understand you were booted from your account and can now only log in with a temporary account.
Windows does this when the main account is unavailable. The account most likely needs to be repaired.
Please follow this document to fix a corrupted profile: Fix a corrupted user profile.
If that doesn't work please go through this document: You receive a "The User Profile Service failed the logon” error message.
Let me know if that works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
Hello all,
I am new to Group Policy. Server is running Windows 2008 R2. All client on Win 7. I have made a folder redirect by creating it on Default Domain Policy instead of creating gpo. Is there a downfall and if so, how do i redo and have it fix ?What if i just let stay without doing or creating the new gpo? let it be on the DDP. any issue will arise or possibilities that might will mess with the system or client pc connected to domain ?
You can let it be, it will not cause harm with anything at all.
It is fine, in a small and simple network, which does not change often, for these things to remain.
If you have a complex network, with many different GP configurations required, having such settings in your DDP can then be a problem, to achieve your desired different/granular settings, e.g. different settings for different departments.
If the DDP (which applies to all departments) contains this setting, then, how do you set it differently for two departments?
But if your network is small and simple, it's fine to do this.
If you have no expectation that in the future it will cause constraint for you, it's fine like this.
You can always change it later, but, it might be more effort then, compared to now?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
Currently have an IPad 2, running ios 6.1.3, looking to update to ios 7.03, but I need to delete 2g of photos. Reading posts, I need to do this via the internal storage, but when I connect ipad to any of our 3 pcs, whilst it is recognised by itunes,
-
How ti find out the list of all z tables.
Hi Experts, I have to find out all the z tables of pp,pm and qm module so that i can know that the authorization group is filled or not. Pls its urgent.
-
Transitions in imovie 6.0.3 using imac 10.4.8
I am creating short imovies with combinations of scanned photos, images from my digital camera and images from a digital video camera. With about 30 or 40 items in the time line I wish to place transitions between them. When I do this however I have
-
Hi, I need a help from you ppl.Can we get a report for the following and is so what is the t-code or whether its a customised one or nt? 1.PO Alert u2013 By vendor 2.Open PO items 3.Local PO status report 4. PO status by item 5. Periodic PO list repo
-
I have purchased a G3, because I am an apple fan. I want this a clean installation software provided. Only the link no longer works. Is there a possibility to get the required software. I Preferably, the Dutch version, but if only the English it's o