Group policy Preference - Internet Option setting not applying

Hi,
I’m not very sure if any of you have encounter this strange issue when
configuring GPP -> Internet option setting for window 7 IE9 or IE11.
The following
are spec of OS and IE version used in my environment.
Window Server
2012 R2 (IE 10)
Window 7 (IE9
and IE11)
Recently I
have deployed proxy setting via GPP as I do not have IEM under my GPMC console.
Once the setting is been configured and deployed, I have notice that the GPO do
not apply after the user login. The following scenarios is what we observed.
1) User boot up the machine, Login and proxy setting will not applied
1a) gpupdate /force -> Proxy Settings applied
1b) setting will be removed after the GPO refreshed
2) User boot up the machine, Login and proxy setting will not apply
2a) User logoff and login proxy setting applied.
2b) Setting will be removed after the GPO refreshed
Kindy advise
if there is any solution to ensure that the setting apply whenever the user
login and stay intact even after the gpo refreshed by itself.

Hi,
>>1a) gpupdate /force -> Proxy Settings applied
>>1b) setting will be removed after the GPO refreshed
Based on the description, we can run command gpresult/h report.html to collect group policy result reports to compare how the settings are being applied.
Besides, have we installed the following hotfix on the computers with IE 9? If not, we can try to install the hotfix.
Internet Explorer Group Policy Preferences do not apply to Internet Explorer 9 in a Windows Server 2008 R2 domain environment
https://support.microsoft.com/en-us/kb/2530309?wa=wsignin1.0
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Windows 2008 R2 - Group Policy Preference - folder option "Open with" Access denied

Similar to this post:
social.technet.microsoft.com/Forums/en-US/d42a81bc-96de-4af3-bc41-079e88e6ea4a
We have Citrix terminal servers running Windows 2008 R2 and attempting to force PDF files to open with Acrobat versus PDF editing software we have installed for a small subset of users. So I created a Group Policy Preference and added a OpenWith item
to the Folder Options to use Acrobat as the default and linked it to a Users OU. However, if I run gpresult the OpenWith setting fails with error code 0x80070005. You can change it to not run in the user's security context which eliminates the
error but then it won't actually do anything.
The problem seems to be that when a user sets another program as their default via Windows Explorer the permissions on HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf\UserChoice get changed so that the user is specifically
denied the ability to set that key. Remove the special permissions added and the group policy succeeds and changes it back to the default ... until the user changes it back (intentionally or otherwise) and the permissions are changed again.
Any ideas here?

> Any ideas here?
We use GPP Registry to achieve this goal, so we do not run into that
issue (we unchecked "run in users context", so privs are not an issue)
But I agree, this really should work as intended...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Group Policy Preferences - Internet Settings - Trusted Sites

hi all
I can't set Trusted Zone (Site) with GPO Preferences - Internet Settings because it is grey?
Chris

Hi Chris,
The Trusted Sites cannot be added using Group Policy Preferences. But you can add it by native group policy.
The group policy settings are here:
User Configuration\Administrative Templates\Windows Components\Internet Explorer\Internet Control Panel\Security Page\Trusted Sites Zone
If you really want to use the GPP, please manually add the registry keys through GPP.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Group Policy Preference's --APplied to Groups not always working

I've created a new group policy preference to add a couple new desktop shortcuts.
I've set the security filtering to apply to "JamesGroup". I have verified that "JamesGroup" has Read & Allow Apply Group Policy selected
I put myself into that group.
I then run a GPupdate/force on my computer and I get no new shortcuts.
If I adjust the security filtering to apply to "JamesUserAccount" and rerun GPupdate/force, the desktop shortcuts come through right away.
I've tried creating new groups and it never seems to work...it just works when I set the security filtering to specific user accounts.
When I remove myself from the security filtering, and run a GPresult /r I see that the GPO was not applied because it was filtered out: Denied (Security)
Why isn't the GPO applying when I set it on a security group?
To make things more interesting, it seems to work if I log onto a different computer as the same user?!? But doesn't work on 90% of the computers.

> Yes I have tried logging out/in, locking/unlocking, and restarting
> computers...nothing seems to work...
How many groups are you a member of? You might suffer kerberos token
bloating...
To verify, check
"whoami /groups"
against
"dsquery user -samid %username% | dsget user -memberof -expand"
All groups in dsquery output also listed in whoami output?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Group policy preference for creating printers setting the wrong printer as default

Hi
We have a a group policy preference applied to users. At the moment we create a shared printer and set it as default for all users in a specific OU. Now we need to add another shared printer. I have updated the policy and set it to create
the new shared printer and have set item level targeting to the same OU as the first printer. I want to keep the existing printer as the default, however when the policy runs, the new printer is created fine but it is set as the default
printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Both printers are Shared printers and are set to Create
The existing printer (printer A) is set as the default printer. It is targeted at the London OU.
The new printer (printer B) has NOT been set as default. It is targeted at the London OU.
No other options have been set.
When the policy is applied both printers are added but printer B is being set as the default.
Any help would be appreciated.
Thanks
G

Hi G,
>>however when the policy runs, the new printer is created fine but it is set as the default printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Before going further, what's the operating systems of our clients? Here, I need to double confirm that the checkbox of
Set this printer as the default printer... is not selected in the new GPP Printer item. Besides, we can change the orders of the printer items. To do this, select the printer item, right click, click All Tasks, and choose Move Up or Move
Down to change the order.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Group Policy Preferences IE9 settings inconsistently applying on Windows 7 Clients

We have two Windows 2008 R2 Domain Controllers.
We have only Windows 7 SP1 clients.
We have a mix of IE 9, 10 ,11 on the clients.
We moved to using GPP to control IE Proxy settings some considerable time ago.
We recently needed add a site the the proxy exceptions list. This appeared to work. However we discovered that for IE 10+ the setting was not effective. So we spun up a Windows 8.1 VM with RSAT and added a new IE Settings object into GP targeting IE
11. This appeared to have the desired effect.
After a while some (and it appears only some) IE9 machines, found their proxy settings reverting. This could be resolved by closing IE down and issuing a gpupdate /force command. However the issue would re-occur for these users, and they would be required
to close their browser and re-issue update /force again.
Furthermore (this may or may not be linked) we have been seeing JavaScript disabled warnings from OWA from some machines running IE11.
Any thoughts on troubleshooting this would be appreciated.
Nick

Would you please let me know if the issue only occurred on all Windows 7 with IE 9 installed machines? Or
only some Windows 7 with IE 9 installed machines have this issue?
The issue is affecting about 20-25% of machines. Generally after a logon they are fine, but then after a background gp refresh they pick up 'old' settings for the bypass proxy list.
Would you please let me know how did you configure the GPP settings?
We opened up an existing GPO that contained our previous Internet Explorer GPP settings on our first domain controller (which appears to have IE11 installed) made the changes to the existing
GPP IE Settings.
We then noticed that the settings hadn't taken on IE11 machines, so we used a windows 8.1 RTM VM with RSAT installed to add an additional "Internet Explorer 8: Internet Explorer 11" only
set of preferences. The IE8/9/10 preferences had priority of 1 the IE 11 preferences a priority of 2
I think the original GPP settings were created from a Windows 7 machine with IE9 and the Enterprise Hotfix Rollup installed.
Did you configure it in one GPO and applied to all machines?
Yes.
Have you tried to just configure it separately on Windows 2008 R2 DC and applied it to these Windows 7 with IE 9 installed machines?
Not yet. We currently have a some LOB activities that require one of the sites in the proxy bypass list. I do not want to risk breaking that until later on this week.
How to enable Group Policy Preferences support for IE9
http://www.grouppolicy.biz/2011/03/how-to-enable-group-policy-preferences-support-for-ie9/
We have the enterprise hotfix rollup installed on the Clients. However
it appears it is not installed on the DCs.
Further examination of the output of a gpresult /h shows that legacy settings from the IE Maintenance object within the GPO match the settings we see applying from time to time. Is that possible? How can we remove the IE Maintenence settings from the
GPO to test?

Unable to make changes to LAN Settings in IE after Group Policy Preference is applied

Hi all,
I have an IE10 group policy preference on a Server 2008 R2 domain that is pushed out to Windows 7 SP1 x64 clients. This IE10 GPP is used to push out proxy settings etc. The GPP is applied fine, however when I go into LAN Settings in IE and make any
changes such as unchecking "Use a proxy server..." these changes are not saved. As soon as I click OK and go back into LAN Settings it reverts back to the GPP settings. Are IE10 GPP's meant to allow a user to amend settings in IE? The users have
permissions to write to the Connections key under Internet Settings in the registry. If I delete the Connections key (Which includes DefaultConnectionSettings and SavedLegacySettings) I can then make changes to the proxy (Although without the original settings).
I know their are other, and better, methods of controlling proxy settings for users but unfortunately this is the way the customer has it implemented. All defaults for GP is applied such as refresh rate etc. I've tested IE10 on a Server 2012 R2 / Win8 environment
with the exact same GPP settings and I can make changes to the LAN Settings. Is this possibly a bug? Any help would be appreciated.
Thanks.

Hi,
So by now we could make it work by deleting the Connections key, in order to change the proxy settings of IE 10-Windows 7 in the Windows Server 2008 R2 environment?
Besides, could it be convenient for us to perform some more tests here? How IE 10 of Windows 7 behaves in Server 2012 R2 environment? And Windows 8 in Server 2008 R2?
Best regards
Michael
Michael Shao
TechNet Community Support

Registry Wizard not saving selections in Group Policy Preferences.

Hello,
I am trying to set registry keys for ODBC settings using Group Policy Preferences. All PC's in the domain are Windows 7. In testing, I was able to get this to work. Now that I am trying to create it for production, I am unable to get it to work.
I am using the same PC to create for production that I used when I was testing.
The steps I am taking are as follows:
Create a new GPO. Edit the GPO and navigate to the registry node under Computer Configuration, Preferences where I create a new Collection Item. I then right click the new collection item and choose New - Registry Wizard. Using Local Computer,
I navigate to [HKLM] > Software > Wow6432Node > ODBC > ODBC.ini
Under the ODBC.ini key are all of the keys and data I want to include in my policy. When I check each key and put a check mark beside each data item in the lower window, my selections in the lower window are not being saved. The check mark
shows up at the time but they are gone if I go back to check my work before hitting the finish button. If I go ahead and finish the policy anyway, I only get the keys, not the data items when the GPO is applied.
I have found a work around but it is very cumbersome and isn't a good long term solution. The work around is to go ahead and create the policy, then go back into the collection and expand everything on the left and add each data value to each key one at
a time using the All Tasks > Add - menu item.
Any ideas why this is happening? I should also mention when I was "testing", I was hitting the same domain controller as I am when trying to build this for my "production" policy.
Thanks in advance.

Hello,
Thanks for your reply. I am waiting on my account to be verified before I can post a screen shot.
I did discover that if I go through and click on all the data items more than once, it appears to work. Basically, I went through each key and checked the data items, then went back to the top and started over again. All of the checks were gone, so I checked
them again and clicked finish. I don't know if they were still missing but checking them twice seems to have worked.
I can replicate the issue if I only check them once.

Group Policy Preferences

I'm interested in applying group policy preferences to our new Windows 7 machines, partly to simplify my image-building process, via Zen 10 (soon Zen 11). However, I understand that these are not available through the Local Group Policy editor- so my question is, does anybody know how we could produce a set of Group Policy preference settings to deploy via Zen, without the presence of Active Directory?

Make sure this option is not set on the policy in the ZCC.
"After enforcement, force a re-login on the managed device, if necessary"
On 5/24/2011 9:36 AM, jfansell wrote:
>
> Thanks- I was hoping to be able to utilise something that already
> existed rather than using custom adm files- but we are now looking into
> doing it that way now. Incidentally we do have a purely for testing AD
> environment in which I created a test policy containing preferences, and
> imported this into ZCM 10, still no joy even though the policy
> preferences files appeared at the workstation (under
> c:\Windows\System32\grouppolicy\...) they just weren't effective.
> Presumably this is somehow a limitation of our environment (the AD is
> completely disconnected from the users and workstations). It would be
> nice if somehow the preferences were replicated in ZCM in the future.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Proxy details keep deleting from field in Group Policy Preferences for IE 10 on windows 7 and 8

We have a lot of users who on the last update and have seemed to manage to install IE 10 onto their windows 7 machines as now causing all sorts of issues. I know that IEM has been replaced in favour of Group Policy Preferences and I have build a windows
8 machine just to create a group policy preference as you are unable to create the preferences from windows 7, thank you Microsoft!
I have created a test OU and got a win 7 and a win 8 machine both with IE 10 for testing. I have created the preference settings, home page etc and disabled using the F keys the advanced features that we do not require as from reading in other post even
if it is not ticked, if it is green then it will apply it, kinda defeats the using the tick but it is what it is!
When we do a gpupdate it picks up the default homepage as well as other settings but the proxy settings is blank. I then went back into the preferences I created for IE 10 and checked the connections, LAN settings and the proxy server name is missing but
both ticks are showing for the proxy settings and when you click on advanced it shows the proxy server and port details fine. I have been working on this now for 4 days and getting no where to a point were we just roll back any users on IE 10 back to IE 9.
I have also unlinked any other gpo relating to Internet settings on the test OU just in case there are conflicts. Any ideas as where to go from here?

In the end to get around the proxy settings I had to create a registry key preference with proxy and port details which seemed to have done the trick and now IE 10 is picking up the proxy details and displaying webpages

Cannot Copy File with Group Policy Preferences

Hi,
I am trying to use a Group Policy Preference to copy a simple text file from a network share to a folder at the root of 'C:\' on the clients. It is not happening. I created the preference in the computer section of the GPO. It is set to create, as the file
does not already exist on the client, with the archive bit on.
Source: \\server.domain.com\folder\fileshare\file.txt
Destination: C:\folder
GPResult shows the clients are getting the GPO, but it seems as if that one setting and another is not being applied. I have no idea why this isn't working when other parts of the GPO are being applied. I read
the documentation on the Technet page, but I must have missed something.
Any ideas why this might not be working?
Thanks
Jason Watkins MCSE, MCSA, MCDBA, CCNA

> Computers" has read access. Listing the actual file name in the
> destination is something I would have never though to do.
...unless the path ends with an "\", it IS a file name, so if you had
"C:\Folder" as the target, check your C:\ drive for a file called
"Folder" :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Extreme slow login on Server 2008 R2 TS at Group Policy Preferences - Printers

I see references to this problem everywhere, going back to 2010. However I'm not finding any real answers.
I have Group Policy Preferences installing printers to Terminal Server Users. I have one policy that applies to 4 terminal servers. One of them is a 2008 R2, the others are 2003 x64. Only for the 2008 R2 server, after all of the printers
show (in event viewer) as successfully loaded, there is a long hang. I have many printers applied to me, and that results in my load time being the longest of all at about 3 minutes. I am an administrator on the machine. Others have the exact
same problem, just a bit less pronounced depending on the number of printers.
The policy preference is set to UPDATE, so it's not loading the driver... again, the printer is already successfully applied.
I've tried setting UAC to "Never" on the server. No effect. I've played with the Point and Print policy at both computer and user level, finally just setting both to disabled, but prior to that setting them to Enabled with the "do
not show warning" on both settings. No effect (which makes sense since that is for non-admins and I am having this problem as an admin).
My logging pasted below shows this same thing in all cases.
Is there an answer to this that I am just not finding?
2013-12-06 09:11:44.133 [pid=0x388,tid=0xca0] Filters passed.
2013-12-06 09:11:44.133 [pid=0x388,tid=0xca0] Adding child elements to RSOP.
2013-12-06 09:11:44.133 [pid=0x388,tid=0xca0] Set user security context.
2013-12-06 09:11:44.289 [pid=0x388,tid=0xca0] Set system security context.
2013-12-06 09:14:13.873 [pid=0x388,tid=0xca0] Set user security context.
2013-12-06 09:14:13.909 [pid=0x388,tid=0xca0] Set system security context.
2013-12-06 09:14:13.909 [pid=0x388,tid=0xca0] Properties handled.
2013-12-06 09:14:13.909 [pid=0x388,tid=0xca0] RunOnce value created [SUCCEEDED(S_FALSE)]

Hi,
Based on your description, I want to confirm whether we have used Item-level Targeting of GPP for printer deploying.
GP Preferences settings that use Item- Level Targeting (ILT) are not inherently harmful. However, certain kinds of Item Level Targeting queries can
take more time to run.
Regarding this issue, the following article can be referred to for more information and the hotfix in the article can be downloaded to fix the issue.
You experience a long domain logon time in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 after you deploy Group Policy preferences
to the computer
http://support.microsoft.com/kb/2561285/en-us
In addition, regarding group policy and logon impact, the following article can be referred to for more information.
Group Policy and Logon Impact
http://blogs.technet.com/b/grouppolicy/archive/2013/05/23/group-policy-and-logon-impact.aspx
Best regards,
Frank Shen

Does using Group Policy Preferences to deploy printers require the print driver to be pre-installed?

I'm trying to prepare our school system for Windows 7 (we currently use XP). I would like to use the new Group Policy Preferences method of deploying printers. I pushed out the XP client side extensions through WSUS. In my test environment, I added the shared printer in group policy preferences. My XP machine had the printers show up automatically, but my Windows 7 machine did not. I realized that I had previously connected a printer of the same type to my XP machine before and the drivers were already installed. To test this theory, I manually connected the shared printers to the Windows 7 machine, deleted them, then logged off and back on. Now the printers are showing up from group policy. My question is does using group policy preferences to deploy printers require the print driver to be pre-installed? If not, then what am I doing wrong? If so, is there a way to work around this? Thanks for your help.
EDIT: To clarify, I am using the share method in GPP. This is the error message I get in the event log:
The user 'PRINTERNAME' preference item in the 'win7 printer test {946461A1-27F8-406F-A0B3-0A1A05AF34F6}' Group Policy object did not apply because it failed with error code '0x80070bcb The specified printer driver was not found on the system and needs to be downloaded.' This error was suppressed.

This link have a description of resolution:
http://technet.microsoft.com/en-us/library/cc725938.aspx
Open the GPMC.
Open the GPO where the printer connections are deployed, and navigate to Computer Configuration, Policies, Administrative Templates, Control
Panel, and thenPrinters.
Note
The Point and Print Restrictions setting can also be found under User Configuration\Policies\Administrative Templates\Control Panel\Printers.
This policy is ignored by Windows 7 and Windows Server 2008 R2, but is enforced by earlier editions of Windows including Windows XP with SP1, Windows Server 2003 with SP1, and Windows Server 2008. We recommend that you change
this policy setting in both locations so that all down-level clients have a consistent experience.
Right-click Point and Print Restrictions, and then click Properties.
Click Enabled.
Clear the following check boxes:
Users can only point and print to these servers
Users can only point and print to machines in their forest
In the When installing drivers for a new connection box, select Do not show warning or elevation prompt.
Scroll down, and in the When updating drivers for an existing connection box, select Show warning only.
Click OK.

Group Policy Preference Power Plan "Blocked By Group Policy"

I noticed this error in the application event log of a Windows 7 PC:
Log Name: Application
Source: Group Policy Power Options
Date: 3/21/2013 3:19:42 AM
Event ID: 4098
Task Category: (2)
Level: Warning
Keywords: Classic
User: SYSTEM
Computer: xxx
Description:
The computer 'Power Plan (Windows Vista and later)' preference item in the 'Windows 7 Desktop Power Plan {A078F08F-45CC-4209-A264-FE0CB5635A99}' Group Policy object did not apply because it failed with error code '0x800704ec This program is blocked by group
policy. For more information, contact your system administrator.' This error was suppressed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Group Policy Power Options" />
<EventID Qualifiers="34305">4098</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-03-21T10:19:42.000000000Z" />
<EventRecordID>7687</EventRecordID>
<Channel>Application</Channel>
<Computer>xx</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>computer</Data>
<Data>Power Plan (Windows Vista and later)</Data>
<Data>Windows 7 Desktop Power Plan {A078F08F-45CC-4209-A264-FE0CB5635A99}</Data>
<Data>0x800704ec This program is blocked by group policy. For more information, contact your system administrator.</Data>
</EventData>
</Event>
How can I find out exactly why it is not working? "Blocked by group policy" is not specific enough.

Hi,
You can also enable GPP tracing and logging for more information:
Computer Configuration\Policies\Administrative Templates\System\Group Policy\Configure Power Options preference logging and tracing
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
Regards,
Cicely
There is no such option "Configure Power Options preference logging and tracing" at Computer
Configuration\Policies\Administrative Templates\System\Group Policy\.
It alphabetical order Always use local ADM files ... is followed by Disallow interactive users from generating ... Not

Group policy Preference - Internet Option setting not applying

Similar Messages

Maybe you are looking for