Group provisioing with AD

Hi
I want to do group provisioing with AD. I have made one form and it has child form. In child table there is one lookup field.
I want that in child form lookup fiels should show data based on selection in Parent Form.
Every idea will be appreciated.
Thanks in advance!

Hi,
I'm facing the same problem. I recommend you to read this post Re: Filtered lookup . You'll find some interesting messages there.
They told me that It is not possible to transfer a value from parent to child forms. i.e. show groups based on the selected it-resource...
Good luck, and please post the answer if you find it.

Similar Messages

In a group text with two phones that use Imessage and one that does not. The person that does not, does not get my message when its sent in group text. How do i fix this?

I have a group text with two of my friends. here's each person break down
person 1 ATT network, using imessage
person 2 verzion network, using imessage
person 3 verzion network, using SMS
All three of us are in a group chat. When person 1 sends a message, person 2 recieves it, but person 3 does not. Then when person 3 sends a message, both person 1 and 2 get it. When person 2 sends an Imessage, person 1 and 3 get it
so the problem is when person 1 sends an imessage, it doesnt change to sms and person 3 doesnt get it, but person 2's automatilly switches it to green.
How can person one get their phone to automaticlly switch it to green in group message while keeping on imessage?

The quote below from http://support.apple.com/kb/HT5760 indicates that it in the situation you describe it should be going as MMS to everyone -- which is not what you are seeing actually happen (and also not what you want to happen if I understand correctly). There may be something else helpful in the link.
Group messages will be sent using iMessage if all recipients have iMessage enabled. If not, the conversation will be sent as MMS. Group messages use MMS even if the content is text only.

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Group Text with Android Doesn't Work

Hi- I had been using an iPhone for a few years, and decided to switch over to Android. It took some time to get my phone number disassociated from iMessage/iCloud, but I was eventually able to get that done. Since iOS8 came out, though, I'm starting to experience problems again. Specifically, whenever I group text with multiple iPhone users, everything works fine -- until my wife (an iPhone 6 user) is added into the group. When this happens, everything automatically switches back to iMessage and I stop receiving any messages.
Has anyone else experienced this? Are there any fixes?
Thanks

Just in case other people found my post by Googling, here is my fix I added to my post on the OpenOffice forum.
Re: Text to speech only reads the document title
by Trish8 » Sat Feb 14, 2015 9:58 am
I tried as many suggestions as I could from the plethora of suggestions above. I'm sure you are correct, it must be the Mac's problem. I took a chance and downloaded LibreOffice; Text to Speech now works the same as it does on TextEdit, the internet, and PdF. Thanks for all the help, I mean that sincerely. OpenOffice is a really fine product.
Patt

Can I group charts with objects in Numbers 3.0?

In Numbers 2.1 I could group charts with objects and text. I can't get this to work in Numbers 3.0. The objects will group but not the charts.
I used this to create marked-up charts in Numbers and paste them into a Pages document.
(I just purchased a new iMac and don't have the old Numbers on it.)

The only way around this is to print to PDF and open in preview, then use the rectangular selection tool to select the are you want to add to pages, then copy, then paste into Pages.
You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"
There are several features that were dropped and may be added back in... see this link:
http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

Set "peoples or groups" field with current user "login name" in sharepoint list form using javascript

hi friends
i am trying to set peoples or groups field in sharepoint list form with current user login name
here my code
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
$(document).ready(function NewItemView () {
var currentUser;
   if (SP.ClientContext != null) {
      SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
   else {
      SP.SOD.executeFunc('sp.js', null, getCurrentUser);
   function getCurrentUser() {
      var context = new SP.ClientContext.get_current();
      var web = context.get_web();
      currentUser = web.get_currentUser();
      context.load(currentUser);
      context.executeQueryAsync(onSuccessMethod, onRequestFail);
   function onSuccessMethod(sender, args) {
      var account = currentUser.get_loginName();
      var accountEmail = currentUser.get_email();
      var currentUserAccount = account.substring(account.indexOf("|") + 1);
   SetAndResolvePeoplePicker("requester",account);
// This function runs if the executeQueryAsync call fails.
   function onRequestFail(sender, args) {
      alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
function SetAndResolvePeoplePicker(fieldName, userAccountName) {
   var controlName = fieldName;
    var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
    var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
    var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
    peoplePickerEditor.val(userAccountName);
    spPeoplePicker.AddUnresolvedUserFromEditor(true);
</script>
but it is not working
please help me

Hi,
According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
To set "peoples or groups" field with current user "login name”, you can use the below code:
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
function SetPickerValue(pickerid, key, dispval) {
var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
xml = xml + PreparePickerEntityXml(key, dispval);
xml = xml + '</Entities>';
EntityEditorCallback(xml, pickerid, true);
function PreparePickerEntityXml(key, dispval) {
return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
function GetCurrentUserAndInsertIntoUserField() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
Function.createDelegate(this, this.onFailure));
function onSuccess(sender, args) {
SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
this._currentUser.get_title());
function onFaiure(sender, args) {
alert(args.get_message() + ' ' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
</script>
More information:
http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

TS3276 how to send a group email with iPhone 5

how to send a group email with iPhone 5

I have a new OSX 27" iMac that is running Maverick.
RE: group emails, I am trying to omit individual recients and have tried the following options without success.
1) Mail- Composing- checked "Automatically- Bcc"
2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
The result is that all names continue to show up with email addresses for group emails.
HELP! HELP! HELP!
Lynn

How to send an group email with text and photo with out having google trash it

how to send a group email with imac 21.5 8.1 Yosemite gmail without having it trashed automatically

Check the settings on the machine(s) that are trashing it.

Why can't I be in a group chat with an android user?

I have the iphone 5 and I am not able to participant in group chats if there is an android user involved. I will not even see the messages that are sent. For example, there is a group chat with another iphone 5 user, an iphone 4s user, and an android user. I am in the chat, as other parties can see my number, but I do not receive any texts from the group.

Because you are using lightroom, whether cs5 supports that camera model or not is irrelevent, unless you open or place the raw file itself into photoshop.
Lightroom does not send a raw file, it sends a tiff or psd (Jpg is also an option if you use a secondary editor) file to photoshop. Odds are greater that lightroom 4 does not support your camera.
Adobe has a list of camera models that each version of lightroom and camera raw support. It will tell you whether you are up to date, need to do an update. If they are not an option then you can use the dng converter or purchase a newer version of lightroom.

HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

Analytical Services failed to get user's parent group tree with Error

Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

IOS 8 creating multiple group messages with same recipients

After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads. It is terrible confusing and annoying. It has done this with several of my group messages. Deleting the duplicate threads have not worked. They keep recreating themselves when certain people text the group.
Any suggestions? This has been a problem for many of my friends as well.

Hi hkapn,
Do you and your wife use the same Apple ID and are connected to the same wifi network? Your phone ringing to multiple devices is called Continuity and is a feature of iOS8. https://www.apple.com/ios/whats-new/continuity/
Essentially, it allows you to use your iPhone cellular connection on all of your iOS8 devices: iPhone, iPad, Mac computers with Yosemite. On some devices the call will look like it is coming through FaceTime, but likely on your wife's iPhone it just looked like a regular call.
Since your iPhone was "hosting" the phone call through it's own cellular connection, you were able to pick it up after your wife answered, which caused your wife's phone to disconnect. This is called Handoff and is also a feature of iOS8.
You can turn off Continuity if you'd like, but you could also look into getting your wife her own Apple ID. I'm guessing you were sharing one so that you didn't have to make purchases twice. Also in iOS8, there is a feature called Family Sharing which allows you to link multiple Apple IDs and share purchases (among other things).
In regards to the group text message issue, as far as I can tell, splitting group messages is NOT a feature. I agree that there should be an answer to this already!

I can't make a group conversation with my friends help

Ok so I tried to make a group conversation with my friends but it says it failed to send help!! idk if it's because one of my friends doesnt have an I phone but I don't think that's the problem because I could txt him in a seperate conversation. Then I asked my friend to make it and she did but I havent gotten any of the txts please help

Hi Elle1018,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're unable to send or receive messages from a particular contact, please follow the steps in the article linked to below.
iOS: Troubleshooting Messages - Apple Support
Take care,
Alex H.

Help , my contacts have disappeared, I only have Groups appearing with subtitle All contacts but none to be seen..what is this about? How can I recover them?

Could anyone help, suddenly my contacts have disappeared, or at least I cannot access them anymore, al I have is a GROUPS screen with All Contacts underneath and...nothing else, it says no contacts...how can I find them again? Help

I entered them directly into my phone. Two days ago, I plugged it into my mac and synced it with itunes, but i didn't sync the contacts and they were still in there after.

Count(*) , group by with multiple columns from multiple tables involved

Hi all,
I am relatively new to SQL.
Currently I have these few requirements, to display quite a number of fields from 3 tables for display of report.
In my query I need to:
1.) count(*)
2.) select quite a number of fields from table 1,2,3
However when count(*) is used, grouped by has to be used to.
How do I actually use group by with so many columns to be selected?
I have actually used the query below, but the count(*) returns 1, the correct output should be 3 instead.
select count(*), table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>........................
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
I know this group by statement looks very unrefined. How can I select multiple fields from different tables, and yet get the count(*) correctly?
Thank you so much for your time.

Hmm yes it actually does return count as 1 for each row. But there are 3 rows returned. E.g.
ctr table1.col1 table1.col2 ..........
1 value1 value1
1 value2 value3
1 value3 value4
If I put the count(*) outside, it returns 3 , the correct output
ctr
3
select count(*) from
select table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
Thus I was wondering if it was the group by of multiple colns that resulted in the count stucked at value 1.

Group provisioing with AD

Similar Messages

Maybe you are looking for