Group SAP in MSCS fail during take offline/bring online.

Hello,
I have a problem with a SAP ECC 6.0 MSCS Windows 2003 64b+Oracle 10.2.0.4. Is recently installed and when I move the group SAP between the nodes, I have not problem, the group and yours resources take offline, they move and bring online in the other node without errors. But when I take offline and bring online the group SAP without move to the anothers node, the resource "SAP <SID> 00 instance" take the status Failed, and the resource "SAP <SID> service" take the status offline, the others resources of group take the status online. After of this errors, the group failed of the same way when I try to move to the another node.
The only workaround that resolve the errors, is to copy the kernel from the originally download (700 221 NOUNICODE) to the kernel of the sap instance.
Thank for yours helps.
Best Regards. Alberto Caro.

I came across this situation before in Windows 2003 server. During the fail-over, sapstartsrv.exe get's corrupted and so you cannot bring back the cluster resources online. The only solution is to replace this one file and try to bring back the resources online. You will know its corrupted when you manually open the file sapstartsrv.exe.

Similar Messages

  • Whether to take Offline (or) Online backup

    Hi
          I am planning to apply support pack 14 now I am in SP13 before applying SP14 I am planning to take Database backup.
          What is recommended whether to take Offline or Online backup,
          Can any one explain which the best way to take backup is.

    Hi,
    Taking a successful backup is must(suggested)  before Support pack implementation.
    However online/offiline anything will be ok.
    As online backup is taken to minimise the downtime for SAP application.
    If you can get a downtime you can go for offline backup..
    Say if you can not get downtime then go for online backup.Given you are running in archive log mode.During this performance will be little degraded.that is why suggested to run online backup in off -peak hours
    You can go for a online backup before night(starting of SP implementation) and before starting the support packs do a log switch and then do a archive backup and make a note of that log number and start the SP implementation.
    In case of problems when you have to restore the backup restore the backup and recover until the log number which we generated just before the SP implementation...
    Thanks.
    Edited by: Vani n on Jul 24, 2008 2:28 PM
    Edited by: Vani n on Jul 24, 2008 2:30 PM

  • Cluster resource SAPCCM4X.00' in Resource Group 'SAP ABC' failed

    Hallo.
    I installed SAPCCM4X following the http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0bcedaa-dfb1-2d10-b3a9-c140aff84dc2?quicklink=index&overridelayout=true
    It is registered successfully, but it fails every 5 minutes.
    I see in the event viewer
    Cluster resource SAPCCM4X.00' in Resource Group 'SAP ABC' failed.
    What could I check?
    Thanks for your help .
    Mario

    Hallo.
    I followed the note.
    The problem is when the CCMS check the status , every 5 minutes.
    The registrazion was successful.
    I set ccms/enable_agent = -1
    I set AgentLocalHost virtualhostname
    But I have the same problem.
    I don't know what to check.

  • Loading Modules and Mounting Local Filesystems failed during boot

    Hi all,
    since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
    [gianluca@gianluca-laptop ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
    [ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
    [ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
    [ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
    [ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
    [ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
    [ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
    [ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: FACS 7bb8d000 00040
    [ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
    [ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1092MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007bc00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[5] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ba60
    [ 0.000000] 0: 0x0007babf -> 0x0007bb80
    [ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
    [ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
    [ 0.000000] On node 0 totalpages: 506587
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2185 pages used for memmap
    [ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8109824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
    [ 0.000000] Hardware name: Aspire 1810TZ
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    [ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
    [ 0.000000] Modules linked in:
    [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
    [ 0.000000] Call Trace:
    [ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
    [ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
    [ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
    [ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
    [ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
    [ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
    [ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
    [ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
    [ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
    [ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
    [ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
    [ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
    [ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
    [ 0.000000] Disabling lock debugging due to kernel taint
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
    [ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1296.656 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003415] Security Framework initialized
    [ 0.003422] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003458] Mount-cache hash table entries: 512
    [ 0.003763] Initializing cgroup subsys ns
    [ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.003772] Initializing cgroup subsys cpuacct
    [ 0.003793] Initializing cgroup subsys memory
    [ 0.003809] Initializing cgroup subsys devices
    [ 0.003813] Initializing cgroup subsys freezer
    [ 0.003816] Initializing cgroup subsys net_cls
    [ 0.003819] Initializing cgroup subsys blkio
    [ 0.003876] CPU: Physical Processor ID: 0
    [ 0.003879] CPU: Processor Core ID: 0
    [ 0.003883] mce: CPU supports 6 MCE banks
    [ 0.003894] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003899] using mwait in idle threads.
    [ 0.005672] ACPI: Core revision 20110316
    [ 0.016682] ftrace: allocating 15225 entries in 30 pages
    [ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
    [ 0.100017] Booting Node 0, Processors #1
    [ 0.100021] smpboot cpu 1: start_ip = 9a000
    [ 0.006666] Initializing CPU#1
    [ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203327] Brought up 2 CPUs
    [ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
    [ 0.204780] devtmpfs: initialized
    [ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
    [ 0.206812] print_constraints: dummy:
    [ 0.206898] NET: Registered protocol family 16
    [ 0.207056] ACPI: bus type pci registered
    [ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.207209] PCI: Using MMCONFIG for extended config space
    [ 0.207212] PCI: Using configuration type 1 for base access
    [ 0.207951] bio: create slab <bio-0> at 0
    [ 0.211250] ACPI: EC: Look up EC in DSDT
    [ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.218783] ACPI: Dynamic OEM Table Load:
    [ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.219702] ACPI: Dynamic OEM Table Load:
    [ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.237838] ACPI: Dynamic OEM Table Load:
    [ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.247515] ACPI: Dynamic OEM Table Load:
    [ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.257074] ACPI: Interpreter enabled
    [ 0.257081] ACPI: (supports S0 S3 S4 S5)
    [ 0.257124] ACPI: Using IOAPIC for interrupt routing
    [ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.265982] ACPI: No dock devices found.
    [ 0.265985] HEST: Table not found.
    [ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.267613] DMAR: Forcing write-buffer flush capability
    [ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
    [ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
    [ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
    [ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.296698] pci 0000:00:1a.7: PME# disabled
    [ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
    [ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.296852] pci 0000:00:1b.0: PME# disabled
    [ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.296974] pci 0000:00:1c.0: PME# disabled
    [ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
    [ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.297105] pci 0000:00:1c.3: PME# disabled
    [ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
    [ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
    [ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
    [ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
    [ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.328828] pci 0000:00:1d.7: PME# disabled
    [ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
    [ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
    [ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
    [ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
    [ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
    [ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
    [ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
    [ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.329274] pci 0000:00:1f.2: PME# disabled
    [ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
    [ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
    [ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
    [ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
    [ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.329653] pci 0000:01:00.0: PME# disabled
    [ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
    [ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
    [ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.333671] pci 0000:02:00.0: PME# disabled
    [ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.340186] pci_bus 0000:00: on NUMA node 0
    [ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.349232] vgaarb: loaded
    [ 0.349386] PCI: Using ACPI for IRQ routing
    [ 0.349389] PCI: pci_cache_line_size set to 64 bytes
    [ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
    [ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
    [ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
    [ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
    [ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
    [ 0.349695] NetLabel: Initializing
    [ 0.349698] NetLabel: domain hash size = 128
    [ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.349720] NetLabel: unlabeled traffic allowed by default
    [ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.359999] Switching to clocksource hpet
    [ 0.363178] Switched to NOHz mode on CPU #0
    [ 0.363276] Switched to NOHz mode on CPU #1
    [ 0.370116] pnp: PnP ACPI init
    [ 0.370143] ACPI: bus type pnp registered
    [ 0.370722] pnp 00:00: [bus 00-ff]
    [ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371140] pnp 00:01: [io 0x002e-0x002f]
    [ 0.371144] pnp 00:01: [io 0x004e-0x004f]
    [ 0.371148] pnp 00:01: [io 0x164e-0x164f]
    [ 0.371151] pnp 00:01: [io 0x0061]
    [ 0.371154] pnp 00:01: [io 0x0070]
    [ 0.371157] pnp 00:01: [io 0x0080]
    [ 0.371160] pnp 00:01: [io 0x0092]
    [ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
    [ 0.371167] pnp 00:01: [io 0x0063]
    [ 0.371170] pnp 00:01: [io 0x0065]
    [ 0.371173] pnp 00:01: [io 0x0067]
    [ 0.371176] pnp 00:01: [io 0x0600-0x060f]
    [ 0.371180] pnp 00:01: [io 0x0610]
    [ 0.371183] pnp 00:01: [io 0x0800-0x080f]
    [ 0.371186] pnp 00:01: [io 0x0810-0x0817]
    [ 0.371190] pnp 00:01: [io 0x0820-0x0823]
    [ 0.371193] pnp 00:01: [io 0x0400-0x047f]
    [ 0.371196] pnp 00:01: [io 0x0500-0x053f]
    [ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
    [ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
    [ 0.371377] system 00:01: [io 0x0610] has been reserved
    [ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
    [ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
    [ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
    [ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.371471] pnp 00:02: [io 0x0000-0x001f]
    [ 0.371474] pnp 00:02: [io 0x0081-0x0091]
    [ 0.371478] pnp 00:02: [io 0x0093-0x009f]
    [ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.371485] pnp 00:02: [dma 4]
    [ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371576] pnp 00:03: [io 0x0070-0x0077]
    [ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.371735] pnp 00:04: [irq 0 disabled]
    [ 0.371750] pnp 00:04: [irq 8]
    [ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.371828] pnp 00:05: [io 0x00f0]
    [ 0.371835] pnp 00:05: [irq 13]
    [ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
    [ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.371991] pnp 00:07: [io 0x0060]
    [ 0.371995] pnp 00:07: [io 0x0064]
    [ 0.372003] pnp 00:07: [irq 1]
    [ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372090] pnp 00:08: [irq 12]
    [ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
    [ 0.372300] pnp: PnP ACPI: found 9 devices
    [ 0.372303] ACPI: ACPI bus type pnp unregistered
    [ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
    [ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
    [ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.410023] NET: Registered protocol family 2
    [ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.411366] TCP reno registered
    [ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411559] NET: Registered protocol family 1
    [ 0.411580] pci 0000:00:02.0: Boot video device
    [ 0.440052] PCI: CLS 64 bytes, default 64
    [ 0.440120] Unpacking initramfs...
    [ 0.493687] Freeing initrd memory: 1728k freed
    [ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    [ 0.494439] Simple Boot Flag at 0x44 set to 0x1
    [ 0.494754] apm: BIOS not found.
    [ 0.494943] audit: initializing netlink socket (disabled)
    [ 0.494958] type=2000 audit(1312551622.493:1): initialized
    [ 0.495391] highmem bounce pool size: 64 pages
    [ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.498715] VFS: Disk quotas dquot_6.5.2
    [ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.499018] msgmni has been set to 1714
    [ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.499357] io scheduler noop registered
    [ 0.499361] io scheduler deadline registered
    [ 0.499380] io scheduler cfq registered (default)
    [ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
    [ 0.500070] intel_idle: MWAIT substates: 0x22220
    [ 0.500074] intel_idle: does not run on family 6 model 23
    [ 0.500082] ERST: Table is not found!
    [ 0.500103] isapnp: Scanning for PnP cards...
    [ 0.857044] isapnp: No Plug & Play device found
    [ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.072099] mousedev: PS/2 mouse device common for all mice
    [ 1.072185] rtc_cmos 00:03: RTC can wake from S4
    [ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.086887] cpuidle: using governor ladder
    [ 1.086890] cpuidle: using governor menu
    [ 1.087261] TCP cubic registered
    [ 1.087265] NET: Registered protocol family 17
    [ 1.087276] Registering the dns_resolver key type
    [ 1.087307] Using IPI No-Shortcut mode
    [ 1.087437] PM: Hibernation image not present or could not be loaded.
    [ 1.087445] registered taskstats version 1
    [ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
    [ 1.088039] Initializing network drop monitor service
    [ 1.088128] Freeing unused kernel memory: 512k freed
    [ 1.088469] Write protecting the kernel text: 3380k
    [ 1.088507] Write protecting the kernel read-only data: 1028k
    [ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106227] udevd[54]: starting version 171
    [ 1.236052] SCSI subsystem initialized
    [ 1.269724] libata version 3.00 loaded.
    [ 1.282619] ahci 0000:00:1f.2: version 3.0
    [ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.282767] ahci: SSS flag set, parallel bus scan disabled
    [ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
    [ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.301035] scsi0 : ahci
    [ 1.301194] scsi1 : ahci
    [ 1.301318] scsi2 : ahci
    [ 1.301438] scsi3 : ahci
    [ 1.301557] scsi4 : ahci
    [ 1.301679] scsi5 : ahci
    [ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
    [ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
    [ 1.301782] ata3: DUMMY
    [ 1.301784] ata4: DUMMY
    [ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
    [ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
    [ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
    [ 1.496717] Switching to clocksource tsc
    [ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
    [ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.788946] ata1.00: configured for UDMA/133
    [ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
    [ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.798506] sda: sda1 sda2 sda3 sda4
    [ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.653828] udevd[228]: starting version 173
    [ 4.958869] ACPI: acpi_idle registered with cpuidle
    [ 4.959125] Monitor-Mwait will be used to enter C-1 state
    [ 4.959159] Monitor-Mwait will be used to enter C-2 state
    [ 4.959167] Marking TSC unstable due to TSC halts in idle
    [ 4.959208] Switching to clocksource hpet
    [ 5.052561] fuse init (API version 7.16)
    [ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
    [ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
    [ 5.377790] Linux agpgart interface v0.103
    [ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
    [ 5.389644] wmi: Mapper loaded
    [ 5.390172] iTCO_vendor_support: vendor-support=0
    [ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 5.532424] ACPI: Power Button [PWRB]
    [ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
    [ 5.554953] ACPI: Lid Switch [LID0]
    [ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 5.555072] ACPI: Sleep Button [SLPB]
    [ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.555173] ACPI: Power Button [PWRF]
    [ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.602755] usbcore: registered new interface driver usbfs
    [ 5.602793] usbcore: registered new interface driver hub
    [ 5.606733] usbcore: registered new device driver usb
    [ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
    [ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
    [ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 5.691336] hub 1-0:1.0: USB hub found
    [ 5.691345] hub 1-0:1.0: 2 ports detected
    [ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
    [ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
    [ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 5.723603] hub 2-0:1.0: USB hub found
    [ 5.723610] hub 2-0:1.0: 6 ports detected
    [ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 5.814571] hub 3-0:1.0: USB hub found
    [ 5.814580] hub 3-0:1.0: 2 ports detected
    [ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    [ 5.824221] hub 4-0:1.0: USB hub found
    [ 5.824230] hub 4-0:1.0: 2 ports detected
    [ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    [ 5.836988] hub 5-0:1.0: USB hub found
    [ 5.836995] hub 5-0:1.0: 2 ports detected
    [ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
    [ 5.846997] hub 6-0:1.0: USB hub found
    [ 5.847004] hub 6-0:1.0: 2 ports detected
    [ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.909784] [drm] Initialized drm 1.1.0 20060810
    [ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
    [ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
    [ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.022599] i915 0000:00:02.0: setting latency timer to 64
    [ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
    [ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
    [ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
    [ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
    [ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
    [ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
    [ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.071626] [drm] Driver supports precise vblank timestamp query.
    [ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
    [ 6.236889] Registered led device: phy0-led
    [ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [ 6.507822] Linux media interface: v0.10
    [ 6.580021] Linux video capture interface: v2.00
    [ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
    [ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
    [ 6.608368] usbcore: registered new interface driver uvcvideo
    [ 6.608371] USB Video Class driver (v1.0.0)
    [ 6.624890] fbcon: inteldrmfb (fb0) is primary device
    [ 6.671041] Console: switching to colour frame buffer device 170x48
    [ 6.678170] fb0: inteldrmfb frame buffer device
    [ 6.678173] drm: registered panic notifier
    [ 6.679734] acpi device:03: registered as cooling_device2
    [ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
    [ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.802470] hda_codec: ALC269: BIOS auto-probing.
    [ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    [ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
    [ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
    [ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
    [ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
    [ 12.647209] /dev/vmci[905]: Module vmci: initialized
    [ 12.827251] ppdev: user-space parallel port driver
    [ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
    [ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
    [ 13.786521] /dev/vmnet: port on hub 1 successfully opened
    [ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
    [ 13.801452] /dev/vmnet: port on hub 1 successfully opened
    [ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
    [ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
    [ 13.854720] /dev/vmnet: port on hub 8 successfully opened
    [ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
    [ 13.915881] /dev/vmnet: port on hub 8 successfully opened
    [ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
    [ 13.936317] /dev/vmnet: port on hub 8 successfully opened
    [ 38.702663] NET: Registered protocol family 10
    [ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
    [ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
    [ 48.976756] vmnet8: no IPv6 routers present
    [ 49.523376] vmnet1: no IPv6 routers present
    [ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 105.127031] wlan0: authenticated
    [ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 105.140396] wlan0: associated
    [ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 105.447150] /dev/vmnet: port on hub 0 successfully opened
    [ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
    [ 105.447181] bridge-wlan0: up
    [ 105.448675] bridge-wlan0: attached
    [ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
    [ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
    [ 107.423712] bridge-wlan0: disabling the bridge
    [ 107.440034] bridge-wlan0: down
    [ 107.440043] bridge-wlan0: detached
    [ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.440157] /dev/vmnet: port on hub 0 successfully opened
    [ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.440177] bridge-wlan0: up
    [ 107.440182] bridge-wlan0: attached
    [ 107.860411] bridge-wlan0: disabling the bridge
    [ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 107.872071] wlan0: authenticated
    [ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 107.875417] wlan0: associated
    [ 107.876696] bridge-wlan0: down
    [ 107.876705] bridge-wlan0: detached
    [ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.904409] /dev/vmnet: port on hub 0 successfully opened
    [ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.904428] bridge-wlan0: up
    [ 107.905917] bridge-wlan0: attached
    [ 118.910106] wlan0: no IPv6 routers present
    This is the output of /var/log/boot
    Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
    Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
    Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
    Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: Starting VMware services:
    Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
    Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
    Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
    Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
    Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
    Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    What could be the problem?
    Thanks

    Wed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
    Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
    Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
    Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
    Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
    Wed Aug 10 08:49:15 2011: Starting VMware services:
    Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
    Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
    Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
    Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    Ok, I still have that fail during the 'Mounting Local Filesystems'.
    If there isn't the swap partition it should be something else from my fstab..
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
    UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
    UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
    UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
    UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
    UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
    UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
    UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
    UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
    But I can't find anything that looks unusual into my /etc/fstab

  • EAP-TLS or PEAP authentication failed during SSL handshake

    Hi Pros,
                   I am a newbie in the ACS 4.2 and EAP-TLS implementation, with that being said. I face an issue during a EAP-TLS implementation. My search shows that this kind of error message is already certificate issue;However, I have deleted and recreated the certificate in both ACS and the client with the same result. I have deleted and re-install the certchain as well.
    When I check my log in the failed attemps, there is what I found:
    Date
    Time
    Message-Type
    User-Name
    Group-Name
    Caller-ID
    Network Access Profile Name
    Authen-Failure-Code
    Author-Failure-Code
    Author-Data
    NAS-Port
    NAS-IP-Address
    Filter Information
    PEAP/EAP-FAST-Clear-Name
    EAP Type
    EAP Type Name
    Reason
    Access Device
    Network Device Group
    06/23/2010
    17:39:51
    Authen failed
    000e.9b6e.e834
    Default Group
    000e.9b6e.e834
    (Default)
    EAP-TLS or PEAP authentication failed during SSL handshake
    1101
    10.111.22.24
    25
    MS-PEAP
    wbr-1121-zozo-test
    Office Networ
    06/23/2010
    17:39:50
    Authen failed
    [email protected]
    Default Group
    000e.9b6e.e834
    (Default)
    EAP-TLS or PEAP authentication failed during SSL handshake
    1098
    10.111.22.24
    25
    MS-PEAP
    wbr-1121-zozo-test
    Office Network
    [email protected] = my windows active directory name
    1. Why under EAP-TYPE it shows MS-PEAP not EAP-TLS? I did configure EAP-TLS....
    2. Why sometimes it just shows the MAC of the client for username?
    3. Why  it puts me in DEFAULT-GROUP even though i belongs to a group well definy in the acs?
    2. Secondly, When I check in pass authentications... there is what i saw
    Date
    Time
    Message-Type
    User-Name
    Group-Name
    Caller-ID
    NAS-Port
    NAS-IP-Address
    Network Access Profile Name
    Shared RAC
    Downloadable ACL
    System-Posture-Token
    Application-Posture-Token
    Reason
    EAP Type
    EAP Type Name
    PEAP/EAP-FAST-Clear-Name
    Access Device
    Network Device Group
    06/23/2010
    17:30:49
    Authen OK
    groszozo
    NOC Tier 2
    10.11.10.105
    1
    10.111.22.24
    (Default)
    wbr-1121-zozo-test
    Office Network
    06/23/2010
    17:29:27
    Authen OK
    groszozo
    NOC Tier 2
    10.11.10.105
    1
    10.111.22.24
    (Default)
    wbr-1121-zozo-test
    Office Network
    In the output below, it says that the user is authenticate and it puts the user in the right group with the right username, but the user never really authenticate. Maybe for the first few seconds when I initiate the connection.
    Before I forget, the suppliant is using WIN XP and 802.1x is enable. I even uncheck not verify the server and the ACS under External User Databases, I did  check ENABLE EAP-TLS machine authentication.
    Thanks in advance for your help,
    Crazy---

    Any ideas on this guys?? In my end, i've been reading some docs... Things started to make sens to me, but I still cannot authenticate, still the same errors. One more thing that catch my  attention now is the time it takes to open a telnet session to cisco device which has the ACS for auth server.
    My AD(Active Direct) and the ACS server are local same subnet(server subnet). Ping to the ACS from my desktop which is in different subnet is only take 1ms. To confirm that the issue is the ACS server, I decided to use another server in remote location, the telnet connection is way faster than the local ACS.
    Let's brain storm together to figure out this guys.
    Thanks in advance,
    ----Paul

  • Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase

    We are upgrading from 4.7 to NW 7.0 (SP#5)
    SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
    We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
    \usr\sap\T03\DVEBMGS15\work
    The upgrade tool reports this error.
    Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key
    RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15 
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner 'CSIAS9:3315' not reached
    TIME Wed Aug 31 15:09:36 2011
    RELEASE 720 COMPONENT NI (network interface)
    VERSION 40 RC -10
    MODULE nixxi.cpp
    LINE 2898
    DETAIL NiPConnect: 165.156.101.209:3315
    SYSTEM CALL connect
    ERRNO 79 ERRNO TEXT Connection refused
    COUNTER 550
    Thanks
    Matt

    Thanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
    Thanks

  • The SAP Instance JC00 fails to start on aIX box

    Hi,
    I am installing SAP Netweaver on AIX box.
    The instalaltion process fails at the phase 33 of 34
    the SAP Instance JC00 fails to start
    if i chek the error fiel
    Trace of system startup/check of SAP System DON on Tue Dec 26 16:00:51 CST 2006
    Called command: /usr/sap/DON/SYS/exe/run/startsap
    Starting SAP Instance JC00
    SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
    Starting at 2006/12/26 16:00:51
    Startup Profile: "/usr/sap/DON/SYS/profile/START_JC00_pun-lpar-idm03"
    (655470) SETENV LD_LIBRARY_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
    Setup Environment Variables
    (655470) SETENV SHLIB_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
    (655470) SETENV LIBPATH=/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    Execute Pre-Startup Commands
    (655470) Local: rm -f jc.sapDON_JC00
    (655470) Local: ln -s -f /usr/sap/DON/JC00/j2ee/os_libs/jcontrol jc.sapDON_JC00
    Starting Programs
    (651450) Starting: local jc.sapDON_JC00 pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    (655470) Waiting for Child Processes to terminate.
    (655470) **** 2006/12/26 16:00:56 Child 651450 terminated with Status 255 . ****
    (655470) **** No more Child Processes to wait for.
    (655470) Parent Shutdown at 2006/12/26 16:00:56
    Execute Post-Shutdown Commands
    (655470) Exiting with Return-Code 3. (No more child processes)
    Startup of Instance failed
    What can be the problem here
    Regards
    Manoj

    Hi Siddesh,
    Thanks for the response
    The trace is form the file dev_jcontrol located in "/usr/sap/DON/JC00/work" directory
    "dev_jcontrol" 111 lines, 5297 characters
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    Worker nodes
    -> [00] sdm                  : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    [Thr  1] Tue Dec 26 19:12:38 2006
    [Thr  1] SigISetDefaultAction : default handling for signal 20
    [Thr  1] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java14_64
    JStartupIReadSection: read node properties [bootstrap]
    -> node name       : bootstrap
    -> node type       : bootstrap
    -> java path       : /usr/java14_64
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20060209 (SR4-1) (JIT enabled: jitc)
    -> java vm vendor  : Classic VM (IBM Corporation)
    -> java vm type    : <default>
    -> java vm cpu     : ppc64
    -> heap size       : 128M
    -> root path       : /usr/sap/DON/JC00/j2ee/cluster
    -> class path      : ./bootstrap/launcher.jar
    -> OS libs path    : /usr/sap/DON/JC00/j2ee/os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : /usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0035316
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
    -> arg[00] = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
    -> arg[01] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> arg[02] = -DSAPINFO=DON_00_bootstrap
    -> arg[03] = -file=/usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=9437188
    -> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
    -> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
    sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
    00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
    /DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
    [Thr  1] JStartupICreateProcess: fork process (pid 274544)
    [Thr  1] Tue Dec 26 19:12:55 2006
    [Thr  1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
    [Thr  1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
    [Thr  1] JControlCloseProgram: started (exitcode = -1)
    [Thr  1] JControlCloseProgram: good bye... (exitcode=-1)
    :q
    pun-lpar-idm03:donadm 68> ls -lt
    total 128
    -rw-rr   1 donadm   sapsys          329 Dec 26 19:12 INSTSTAT
    -rw-rr   1 donadm   sapsys         1323 Dec 26 19:12 sapstart.log
    -rw-rr   1 donadm   sapsys         5297 Dec 26 19:12 dev_jcontrol
    -rw-rr   1 donadm   sapsys         7556 Dec 26 19:12 dev_bootstrap
    -rw-rr   1 donadm   sapsys          615 Dec 26 19:12 std_bootstrap.out
    -rw-rr   1 donadm   sapsys          158 Dec 26 19:12 sapstart0.trc
    -rw-rr   1 donadm   sapsys          158 Dec 26 19:12 stderr0
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:12 stdout0
    -rw-rr   1 donadm   sapsys          240 Dec 26 19:12 dev_sapstart
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:12 dev_tp
    lrwxrwxrwx   1 donadm   sapsys           39 Dec 26 19:12 jc.sapDON_JC00 -> /usr/sap/DON/JC00/j2ee/os_libs/jcontrol
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:11 dev_tp.old
    -rw-rr   1 donadm   sapsys         5519 Dec 26 17:32 dev_jcontrol.old
    -rw-rr   1 donadm   sapsys         7568 Dec 26 17:32 dev_bootstrap.old
    -rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon
    -rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon.old
    pun-lpar-idm03:donadm 69> vi dev_bootstrap
    "dev_bootstrap" 176 lines, 7556 characters
    trc file: "/usr/sap/DON/JC00/work/dev_bootstrap", trc level: 1, release: "640"
    node name   : bootstrap
    pid         : 274544
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
        arg[02] : -DSAPINFO=DON_00_bootstrap
        arg[03] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djco.jarm=1
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -Dsys.global.dir=/sapmnt/DON/global
    -> arg[  5]: -Dapplication.home=/usr/sap/DON/JC00/j2ee/os_libs
    -> arg[  6]: -Djava.class.path=/usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar:./bootstrap/launcher.jar
    -> arg[  7]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee
    /os_libs:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr
    /sap/DON/JC00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> arg[  8]: -Dmemory.manager=128M
    -> arg[  9]: -Xmx128M
    -> arg[ 10]: -DLoadBalanceRestricted=no
    -> arg[ 11]: -Djstartup.mode=BOOTSTRAP
    -> arg[ 12]: -Djstartup.ownProcessId=274544
    -> arg[ 13]: -Djstartup.ownHardwareId=F0052428966
    -> arg[ 14]: -Djstartup.whoami=bootstrap
    -> arg[ 15]: -Djstartup.debuggable=yes
    -> arg[ 16]: -DSAPINFO=DON_00_bootstrap
    -> arg[ 17]: -DSAPSTARTUP=1
    -> arg[ 18]: -DSAPSYSTEM=00
    -> arg[ 19]: -DSAPSYSTEMNAME=DON
    -> arg[ 20]: -DSAPMYNAME=pun-lpar-idm03_DON_00
    -> arg[ 21]: -DSAPDBHOST=
    -> arg[ 22]: -Dj2ee.dbhost=pun-lpar-idm03
    Signal 6 encountered.
    => 64 bit R/3 Kernel
    => 64 bit AIX Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x0x111179f20
    => Stack address = 0x111151b00
    => Stack low     =  0x11114f200
    => Stack high    =  0xffffffffffff470
    => Stack Trace:
            pthread_kill() at 0x90000000040d2b4
            praise() at 0x90000000040ccec
            raise() at 0x900000000049c50
            abort() at 0x900000000073eb0
            GetPropertiesMD() at 0x900000004267774
            ciCreateJVM() at 0x9000000042ff824
            JNI_CreateJavaVM() at 0x90000000429329c
            JHVM_LoadJavaVM() at 0x1000918d4
            JLaunchIStartFunc() at 0x10008bb14
            pthreadbody() at 0x9000000003f92d8
    !!! Invalid stack address encountered: 0x0
    !!! Stack corrupted.
    => CPU Registers:
         msr = 0xa00000000000d032     iar = 0x090000000040d2b4
         ctr = 0xffffffff00418400      lr = 0xffffffffffffffff
         xer = 0x00000000ffffffff      cr = 0x0000000000000000
         r00 = 0xffffffffffffffff     r01 = 0x0000000111151b00
         r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
         r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
         r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
         r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
         r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
         r12 = 0xffffffffffffffff     r13 = 0x0000000111153994
         r14 = 0x0000000000000000     r15 = 0x0000000000000000
         r16 = 0x0000000000000000     r17 = 0x0000000000000000
         r18 = 0x0000000000000000     r19 = 0x0000000000000000
         r20 = 0x0000000000000000     r21 = 0x0000000000000000
         r22 = 0x0000000000000000     r23 = 0x0000000000000000
         r24 = 0x0000000000000000     r25 = 0x0000000000000000
         r26 = 0x0000000000000000     r27 = 0x09001000a1c9ea40
         r28 = 0x0000000111153994     r29 = 0x0000000000000006
         r30 = 0x0000000000000304     r31 = 0x0000000000000006
    [Thr 772] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c   836]
    :q
    pun-lpar-idm03:donadm 70> /usr/sbin/lsattr -E -l sys0 -a realmem
    realmem 1048576 Amount of usable physical memory in Kbytes False
    pun-lpar-idm03:donadm 71>
    pun-lpar-idm03:donadm 71>
    pun-lpar-idm03:donadm 71> pwd
    /usr/sap/DON/JC00/work
    pun-lpar-idm03:donadm 72> ls
    INSTSTAT           dev_jcmon          dev_jcontrol.old   dev_tp.old         sapstart0.trc      stdout0
    dev_bootstrap      dev_jcmon.old      dev_sapstart       jc.sapDON_JC00     std_bootstrap.out
    dev_bootstrap.old  dev_jcontrol       dev_tp             sapstart.log       stderr0
    pun-lpar-idm03:donadm 73> vi dev_jcontrol
    "dev_jcontrol" 111 lines, 5297 characters
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=9437188
    -> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
    -> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
    sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
    00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
    /DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
    [Thr  1] JStartupICreateProcess: fork process (pid 274544)
    [Thr  1] Tue Dec 26 19:12:55 2006
    [Thr  1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
    [Thr  1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
    [Thr  1] JControlCloseProgram: started (exitcode = -1)
    [Thr  1] JControlCloseProgram: good bye... (exitcode=-1)

  • BlueTooth [BT] failed during use. Various links say "BT Not Available" - "No BT Hardware Found" etc. Have 3 yr. MacBook Pro Notebook with OSX 10.6.8 with built-in Bluetooth. HELP !

    Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in  Bluetooth. [ Close by iPad's BT remains functional. ]

    Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.

  • EAP-TLS PEAP FAIL DURING SSH HANDSHAKE

    Hi Pros,
                   I am a newbie in the ACS 4.2 and EAP-TLS implementation, with that being said. I face an issue during a EAP-TLS implementation. My search shows that this kind of error message is already certificate issue;However, I have deleted and recreated the certificate in both ACS and the client with the same result. I have deleted and re-install the certchain as well.
    When I check my log in the failed attemps, there is what I found:
    Date
    Time
    Message-Type
    User-Name
    Group-Name
    Caller-ID
    Network Access Profile Name
    Authen-Failure-Code
    Author-Failure-Code
    Author-Data
    NAS-Port
    NAS-IP-Address
    Filter Information
    PEAP/EAP-FAST-Clear-Name
    EAP Type
    EAP Type Name
    Reason
    Access Device
    Network Device Group
    06/23/2010
    17:39:51
    Authen failed
    000e.9b6e.e834
    Default Group
    000e.9b6e.e834
    (Default)
    EAP-TLS or PEAP authentication failed during SSL handshake
    1101
    10.111.22.24
    25
    MS-PEAP
    wbr-1121-zozo-test
    Office Networ
    06/23/2010
    17:39:50
    Authen failed
    [email protected]
    Default Group
    000e.9b6e.e834
    (Default)
    EAP-TLS or PEAP authentication failed during SSL handshake
    1098
    10.111.22.24
    25
    MS-PEAP
    wbr-1121-zozo-test
    Office Network
    [email protected]
    = my windows active directory name
    1. Why under EAP-TYPE it shows MS-PEAP not EAP-TLS? I did configure EAP-TLS....
    2. Why sometimes it just shows the MAC of the client for username?
    3. Why  it puts me in DEFAULT-GROUP even though i belongs to a group well definy in the acs?
    2. Secondly, When I check in pass authentications... there is what i saw
    Date
    Time
    Message-Type
    User-Name
    Group-Name
    Caller-ID
    NAS-Port
    NAS-IP-Address
    Network Access Profile Name
    Shared RAC
    Downloadable ACL
    System-Posture-Token
    Application-Posture-Token
    Reason
    EAP Type
    EAP Type Name
    PEAP/EAP-FAST-Clear-Name
    Access Device
    Network Device Group
    06/23/2010
    17:30:49
    Authen OK
    groszozo
    NOC Tier 2
    10.11.10.105
    1
    10.111.22.24
    (Default)
    wbr-1121-zozo-test
    Office Network
    06/23/2010
    17:29:27
    Authen OK
    groszozo
    NOC Tier 2
    10.11.10.105
    1
    10.111.22.24
    (Default)
    wbr-1121-zozo-test
    Office Network
    In the output below, it says that the user is authenticate and it puts the user in the right group with the right username, but the user never really authenticate. Maybe for the first few seconds when I initiate the connection.
    Before I forget, the suppliant is using WIN XP and 802.1x is enable. I even uncheck not verify the server and the ACS under External User Databases, I did  check ENABLE EAP-TLS machine authentication.
    Thanks in advance for your help,
    Crazy---

    I had this message recently. The first issue I found was that the username entered into the laptop was not correct (I had djohnson, need to have DJohnson)
    The second issue I had was that my AP's were not authenticating to my WDS access point. I had turned off LEAP on my ACS server by accident causing the WDS authentication to fail. Once I turned this back on, my AP's authenticated to my WDS device and my users authenticated to the AP's.
    Otherwise, the meaning of this is that the certs are not matching up correctly with the server either due to expiered certs, incorrect cert type on the users machine or incorrect information in the cert.
    Hope this helps.

  • A Windows Workflow Foundation workflow failed during execution

    Needed to know if there was some way to identify what the workflow was that is causing this error? I see this: "Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839" just not sure what SMLet I can use to see what this corresponds too.
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          1/2/2013 1:56:56 PM
    Event ID:      33880
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      scsm
    Description:
    A Windows Workflow Foundation workflow failed during execution.
    Workflow Type: Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow
    Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839
    Exception Type: Microsoft.EnterpriseManagement.Common.ObjectNotFoundException
    Exception Message: An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.
    Exception Stack:    at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
       at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
       at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
       at System.Workflow.Runtime.Scheduler.Run()
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">33880</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-02T19:56:56.000000000Z" />
        <EventRecordID>1098867</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>scsm</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow</Data>
        <Data>0cb64340-3a44-009e-67af-70963215b839</Data>
        <Data>Microsoft.EnterpriseManagement.Common.ObjectNotFoundException</Data>
        <Data>An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.</Data>
        <Data>   at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
       at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
       at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
       at System.Workflow.Runtime.Scheduler.Run()</Data>
      </EventData>
    </Event>
    Help

    Everytime I run it I get nothing.
    Tried using the workflow identifier: 0cb64340-3a44-009e-67af-70963215b839 and tried this number as well: 6ec982d4-207f-da19-3bc9-e6d2ff7b067e
    Both just take me to the prompt with no info.
    EVENT ID 33880 Health Service Modules is the event title.
    Help

  • Always failed during operating system checking while installing NetWeaver.

    I have installed NetWeaver Composition Envrionment Sneak Preview - Java EE only but always failed during operating system checking. Does this version not support Window XP Professional SP2? This is mostly used window system.

    I checked the instruction and comfirmed that it does support Window XP Professional (SP2):
    System Requirements
    <b>Windows XP Professional (Service Pack 2)</b> or Windows 2003 Server (Service Pack 1)
    <b>This version runs on Windows XP (SP2)</b> with password accounts and Windows Server 2003 (32bit)
    NTFS file system
    Micrsoft Internet Explorer 6.0 or higher, or Firefox 1.0 or higher
    Min. 1 GB, recommended 2 GB RAM
    7 GB free hard disc space
    Download file 1.8 GB
    1.5 GHz PC or higher
    Monitor 1024x768 pixels or more, 256 colors
    Internet access (for CE online documentation)
    If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activate it using a unique password. Download the latest credential and passwort from SDN

  • Portege R500 fails during POST

    Hello all,
    I've got a Portege R500 for an year now and yesterday it started to fail during POST, I presume.
    The display is stuck at the power on screen, with the boot device selection icons, but no action can be taken (entering bios, selecting boot device, etc...). I've already tried to remove the battery for a couple of hours, without any result, but I assume that It would take more than a couple of hours to deplete the backup battery and reset the CMOS...
    Other than the boot screen, no other information is available, so I'm thinking that this machine is dead... Does anybody had a similar problem?
    Best regards,
    Paulo

    Hi
    The POST (power on self test) is executed by BIOS.
    During the POST some components and parts on the motherboard would be checked.
    For example POS checks the CPU, CPU related modules, CMOS RAM, CPU cache, GPU memory, main RAM and other hardware components, etc
    In most cases a hardware problem on the motherboard can be the reason if the POST cannot be passed properly.
    Usually the technician would recommend replacing the motherboard but as you know the motherboard is not cheap. Its one of the expensive notebook parts.
    Its not easy to say what the best solution for you is; I think you should ask a technician for a hardware check and then you would know whats exactly wrong
    After that you can decide what you want to do

  • Take offline inactive

    Hello,
    I can't activate the "take offline" option in Excel.
    My OS is Windows Vista and I already made the following tasks:
    1) Enable "offline usage" option in Data Forms administrator;
    2) Copy the file mscomct2.ocx to system32 directory.
    Do you know what could be missing?
    Regards,
    Rodrigo

    Hello Sanjay,
    In SAP Netweaver 2004 or below, you can still schedule DB2 offline backup with DB13, but the following problem may occur according to OSS Note 427982:
    o Incorrect logging
    Even though the backup exits successfully, the corresponding job
    ends with an error.
    The log then contains entries such as the following:
    Job was started
    Step 001 started (Program RSDBAJOB, Variant &0000000000002, ...
    The logical command DB6_DBBACKUP is executed on host pcibm01
    Parameter:C46 OFFLINE TO /dev/st0 BUFFERS 1 BUFFERSIZE 1024
    PARALLELISM
    Backup successful. The timestamp for this backup image is :
    200108161023
    Backup size is : 12071MB.
    TemSe: Input/output error
    Job was terminated
    Instead of the above-mentioned error, other I/O errors or runtime
    errors can also be reported. Another error message that may
    appear in the job log is, for example:
    ABAP processor: ZDATE_ADJUST_FAILED
    o Offline backup is not possible
    The offline backup terminates with SQL error 1035.
    As of SAP Netweaver 2004s, DB2 offline backup is no longer supported. And you are suggested to use a combination of online backup with the "INCLUDE LOGS" option to get a full backup.
    Please also refer to this existing discussion about the same issue.
    [DB6 db13 offline backup;
    Regards,

  • How to enable Order release to rejected status when batch derivation fails during release

    Hi,
    I need to enable production order release to rejected status when batch derivation fails during order release.
    one way is to have Batch entry required for the sender material in the material master, with this standard SAP will reject the release.
    Below is the scenario:
    sender attribute for derivation  - VFDAT from batch of the sender material
    sender material  - Batch Entry not required in material master
    All required master data set for derivation.
    during order release, since batch entry is not required, system carries out the derivation without sender batch and derivation fails. Order still gets released.
    I am looking for advise on how to restrict release in above situation.
    appreciate your help.
    Thanks
    Aheesh

    Aheesh,  Order release for instance is based on what we see as events/system statuses which are allowed/forbidden etc., for a particular action to happen/be triggered.
    If you can figure out if there exists a status related to batch derivation, it may give some further leads.

  • [SOLVED]bluetooth error - sap driver initialization failed

    Hello,
    I have problem with bluetooth (since I installed Arch 4 years ago ). I've noticed that there are two errors (one is probably just consequence of the first). Nothing else except this is in journalctl and the same message I get when i manually restart bluetoothd through systemctl. Here is an output of status:
    ● bluetooth.service - Bluetooth service
    Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled)
    Active: active (running) since Tue 2014-11-11 09:41:40 CET; 2s ago
    Docs: man:bluetoothd(8)
    Main PID: 1495 (bluetoothd)
    Status: "Running"
    CGroup: /system.slice/bluetooth.service
    └─1495 /usr/lib/bluetooth/bluetoothd
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Bluetooth daemon 5.24
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Starting SDP server
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Bluetooth management interface 1.7 initialized
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Sap driver initialization failed.
    Nov 11 09:41:40 530uarch bluetoothd[1495]: sap-server: Operation not permitted (1)
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Endpoint registered: sender=:1.10 path=/MediaEndpoint/A2DPSource
    Nov 11 09:41:40 530uarch bluetoothd[1495]: Endpoint registered: sender=:1.10 path=/MediaEndpoint/A2DPSink
    I've found some info here but it's KDE-desktop related.
    My /etc/bluetooth/main.conf is in it's default and active lines are:
    [General]
    # Default adaper name
    # %h - substituted for hostname
    # %d - substituted for adapter id
    Name = %h-%d
    # Default device class. Only the major and minor device class bits are
    # considered.
    Class = 0x000100
    # How long to stay in discoverable mode before going back to non-discoverable
    # The value is in seconds. Default is 180, i.e. 3 minutes.
    # 0 = disable timer, i.e. stay discoverable forever
    DiscoverableTimeout = 0
    # How long to stay in pairable mode before going back to non-discoverable
    # The value is in seconds. Default is 0.
    # 0 = disable timer, i.e. stay pairable forever
    PairableTimeout = 0
    # Automatic connection for bonded devices driven by platform/user events.
    # If a platform plugin uses this mechanism, automatic connections will be
    # enabled during the interval defined below. Initially, this feature
    # intends to be used to establish connections to ATT channels.
    AutoConnectTimeout = 60
    # What value should be assumed for the adapter Powered property when
    # SetProperty(Powered, ...) hasn't been called yet. Defaults to true
    InitiallyPowered = true
    # Do reverse service discovery for previously unknown devices that connect to
    # us. This option is really only needed for qualification since the BITE tester
    # doesn't like us doing reverse SDP for some test cases (though there could in
    # theory be other useful purposes for this too). Defaults to true.
    ReverseServiceDiscovery = true
    # Enable name resolving after inquiry. Set it to 'false' if you don't need
    # remote devices name and want shorter discovery cycle. Defaults to 'true'.
    NameResolving = true
    # Enable runtime persistency of debug link keys. Default is false which
    # makes debug link keys valid only for the duration of the connection
    # that they were created for.
    DebugKeys = false
    Anyway - when I want to connect my keyboard, I have to go to bluetoothctl, connect, disconnect and then again connect - then it's working OK.  During that I get this errors:
    Nov 11 09:53:40 530uarch bluetoothd[1495]: Can't get HIDP connection info
    The keyboard also gets disconnected after cca 5 minutes of inactivity and bluetooth daemon use 100% of one core for no reason. When I type something on keyboard, it gets back to normal. And the best thing? When I hit Caps Lock on my BT keyboard, it stops working and disconnect from laptop. I have to disconnect it first in bluetoothctl and connect it again!
    I guess this should be first step in making it work.
    My friend with other laptop and other keyboard has exactly same problems. Thanks to lack of documentation for Bluez it's hard to find out what's going on. Really - this is one of the things that pisses me off the most in Linux.
    Last edited by Kotrfa (2014-11-13 08:03:51)

    Ok, solved by installing bluez4 from AUR and then use commands which I've found on wiki for BT keyboard here. And then added this to my autostarted applications:
    if [[ `rfkill list bluetooth | grep Soft|awk '{print $3}i'` == 'no' ]]; then bluez-test-input connect 20:73:**:55:**:88; fi
    Last edited by Kotrfa (2014-11-13 08:03:38)

Maybe you are looking for