Group selection in sub-window... e.g. to move

A page window contain three sub-windows,
I delete two sub-windows and want to move the middle one to the top of the page... (reflow)
this sub-window contains 20 or 30 objects,
How do I select the sub-window and it's contents without selecting the page window?
Select sub-window/Command-A selects the page window as well as the sub-window
Select first, shift-select last does not work.
Can you select the whole page and them de-select the page window?
¿You can group objects in illustrator, can't you?
The Hasseblad manual is over 140 pages... so I want to redue the number of pages before I A3 auto-duplex booklet print.
It is nice to be abble to delete pages instead of having to omit them using the print page ranges option.
Some chapters contain pages with paragtaphs nit relevent to my camera, so I want to delete the irrelevvant paragraphs and re-folow the chapter.

Please note the Tag: Acrobat_X!_pro.
One of the top level menu options in Acrobat is "Window" ...but there is no reference to it anywhere, and most of it's sub- menu options have no discernable effect.
If you add text to a blank page or area, a new window/box/frame or whatever you call it is created round it... but it seems not to be possible to create a sub-window within it.
I mentioned Illustrator thinking that there might be similarities in the nomenclature or methods between two "suite" programs by the same company?
A sub-window (or frame, object, box or whatever you call it) is a window within another window... the "page window is the window that fills a page. Is it possible to create/select nested windows in Acrobat, or do you have to create them in another program?
I had hoped that Acrobat X! pro would have enabled me to work with PDF files without trying to export them to word.
Test Screen Name wrote:
Is this question about Acrobat or Illustrator or something else? If it's Acrobat I've no idea what you mean by "page window" and "sub window".

Similar Messages

MediaSource sub-windows for Album/Artist/Genre have gone

My wife's Zen Micro (2--02) doesn't seem able to have its music organised by Creative MediaSource Explorer.
I'm sure that MediaSource used to display not only the tracks but had little sub-windows where you could select Album, Artist or Genre and get all the tracks associated with your choice.
However, all that I get now is a list of filenames. OK, I can click on these to get the next folder level which seems to be the album name, then further click to get to the track(s).
What I can't do is get the thing to list all tracks or all albums or all genres. It's just hopeless.
MediaSource, as I say, used to show little sub-windows when I had my Zen Xtra but now my wife's Zen Micro's been added and everything upgraded, these sub-windows for Album and Artist do not appear as they do in the illustration with the blurb...not even with my Zen Xtra.
Further, the Zen Micro doesn't seem to have a list of selected tracks like my Xtra does. The help files seem to refer to one but I'm blowed if I can find it, either via my PC or via the player's own display.
How do you see what's coming up next to play?
Everything's upgraded to the latest using Auto update and I re-loaded the f/w.
Can anyone tell me what I'm doing wrong, please?

In the bar above the list of tracks there should be a Find box. Next to this is a View button, next to that is a small downward triangle which, when clicked, allows you to select Genre, Album, Artist. Play around with those 2 buttons and you should be able to get back the view you want.
To view the selected tracks click on View in the menu bar and then choose Now Playing Window.
PB
Message Edited by PeeBee on 07-8-2005 04:47 AM

Group Selection tool missing from tools

Hi all,
My group selection is missing from my toolbar on the right and is replaced with position tool. Is there anyway of getting it back?
Thanks in advance for your help.

Hello charmayn,
Yes I completely agree with Peter we don’t have "Group Selection" tool in ID. Still you are feeling something missing in your tools panel...? Just go to Windows menu > workspace >> Reset Panels. So you can get ID default all tools. I hope it will help you.
Regards,
Siva

Grouped and non-grouped SELECT in one query: help!

look first at: Wrong result when I use CASE on this forum. Here I wanted to get the user who created and the user who solved a problem (Lets call it Validation Error from now on (VE)).
The thing is: I already have a query who returns me lots of information about a VE.
The query in the previous thread returned me additional info about that VE (that is the creating_user and the solving_user). The 1st query is no group select, but the second is! Still, I need to combine those two in one query.
1st query:
select ve.seq,
     max((case vah.action when 'C' then vah.ur_code else null end)) created,
     max((case vah.action when 'S' then vah.ur_code else null end)) solved
from validation_errors ve
left outer join ver_action_histories vah
on (ve.seq = vah.ver_seq AND ve.log_date = vah.ver_log_date)
where ve.seq = 12860687
group by ve.seq;Result:
seq       | created | solved
12860687    Bob       Bobdont mind the "where"-clause, it is just to make the query go faster
what I do is: I join the VE with the ver_action_histories table which contains the users and what action they performed on a VE.
Now I just want to add that information to the results of an other query which also returns lots of information about a VE.
2nd query:
select ve.seq "VE seq", mh.seq "Counter seq",
          ve.log_date, ve.solve_date, ve.solved Status, ve.failure_code, ve.mde_code,
          mh.meter_type,
          iv.mr_type, iv.mr_reason,
          ih.mmr_seq
from validation_errors ve
inner join meter_histories mh
on (ve.mhy_seq = mh.seq)
left outer join index_values iv
on (ve.mhy_seq = iv.mhy_seq AND ve.log_date =iv.timestamp)
left outer join index_histories ih
on (ve.mhy_seq = ih.ive_mhy_seq)
where ve.seq = 8653936
and sysdate >= mh.start_date
and sysdate < mh.end_date;dont mind the "where" and "and"-clauses ... I hope the result of this query will simplify things ...
Result:
seq        |   counter seq | log_date | solved_date | status    | failure_code | ...
12860687       4568          1-jan-06   2-jan-06      Solved      ABCNow the actual question: Is it possible to combine those queries in one query? I just want the results of the first query (creating_user and solving_user) to be added as columns to the second result. Performance is very important. Please tell me that its possible?
Wanted Result:
seq        |   counter seq | log_date | solved_date | status    | failure_code | created | solved | ...
12860687       4568          1-jan-06   2-jan-06      Solved      ABC            Bob        BobIf anything I explained is unclear, please tell so I can try to explain it in an easier way.

Try an in line view:
select *
from
( <your first query goes here > ) a
, ( <your second query goes here > ) b
where a.seq = b.seq

Matrix exporting to excel with empty columns, with page break option of "Between each instance of a group" selected.

I am working with Report Builder 3.0 I am using a matrix to produce grouped data on separate worksheets in excel.
The select is:
SELECT ID, Measurement, Value, [Date] FROM Measurements_Report. (please ignore the underscores they are just for formatting)
The contents of the Measurements_Report table:
ID__Measurement__Value__[Date]
1___Hot_________33_____10/1/2014
2___Hot_________44_____10/2/2014
3___Cold_________55_____10/2/2014
The matrix contains a single row group based on the field "measurement". The Measurement group has the page break option of "Between each instance of a group" selected.
There is a column group based on the field "Date".
When this is matrix is exported to excel on the first worksheet (Hot) there are three columns as shown below:
ID__10/1/2014____10/2/2014___10/2/1014
1___33
2_______________44
Notice the last column doesn't have a value.
On the second worksheet (Cold) there are also three columns as shown below:
ID__10/1/2014___10/2/2014___10/2/1014
3__________________________55
This time notice there is only one row and only a value in the last column.
I only want the columns with data for that worksheet to show up. How can I remove these empty/duplicate columns? Hopefully there is a simple fix. Thanks ahead of time.

With the following contents of the Measurements_Report table:
ID__Measurement__Value__[Date]
1___Hot_________33______10/1/2014
2___Hot_________43______10/1/2014
2___Hot_________44______10/2/2014
3___Cold________55______10/2/2014
Returns on the first tab (Hot):
ID__10/1/2014____10/1/2014____10/2/2014
1___33
2_________________43
2______________________________44
In the excel worksheet it contains a separate column for each date with a value. Thanks again!
Why is the same date repeating on multiple columns? Do you've the time part also returned from database?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Safari 5.1.2 opens two of every window when selecting "Reopen all windows from last session" since the latest update.

Since the latest Saffari update to 5.1.2, every time I close Safari and reopen, and select "Reopen all windows from last session," two of every window opens. I must go through a long list under the 'Window' menu and select one of eac pair and close them. What a hassle.
Has anyone experienced this as well, and is there a fix?

is there a fix?
Disable Resume...
How To Disable Lion's 'Resume' Feature - MacRumors.com

The processing of Group Policy failed. Windows attempted to read the file...

Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.

Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again!

Apex 3.2 group select list

Hi,
I just want share this if you are still in older version of Apex and you use jQuery.
I did made "plugin" for grouped select list
See sample here
http://actionet.homelinux.net/htmldb/f?p=100:86
Plugin source
;(function(){
jQuery.fn.htmldbLovOptGrp=function(o){
var t=jQuery(this);
o=jQuery.extend({
sessionValue:t.val(),
nullShow:false,
nullValue:'%null%',
nullDisplay:'%',
lovProcess:undefined,
lovGrpLabel:'GRP',
lovDisValue:'DIS',
lovRetValue:'RET',
loadingTxt:'Loading ...',
loadingCss:{'width':'80px'}
},o);
return lCreSelect(t,o);
jQuery.htmldbAjax=jQuery.fn.htmldbAjax=function(opt){
jQuery.ajaxSetup({
url:'wwv_flow.show',
dataType:'HTML',
traditional:true,
cache:false,
type:'POST',
data:{
   p_flow_id:jQuery('#pFlowId').val(),
   p_flow_step_id:jQuery('#pFlowStepId').val(),
   p_instance:jQuery('#pInstance').val()
return jQuery.ajax(opt);
jQuery.htmldbJSON=jQuery.fn.htmldbJSON=function(opt,callfn){
return jQuery.htmldbAjax({dataType:'json',data:opt,success:callfn});
function lCreSelect(t,o,j){
t.empty().hide().parent().append(jQuery('<div/>').html(o.loadingTxt).addClass('ui-autocomplete-loading').css(o.loadingCss));
jQuery.htmldbJSON(jQuery.extend(j,{p_request:'APPLICATION_PROCESS='+o.lovProcess}),function(jd){
if(o.nullShow){lAppendOpt(t,null,o.nullDisplay,o.nullValue);}
jQuery.each(jd.row,function(i,d){lAppendOpt(t,d[o.lovGrpLabel],d[o.lovDisValue],d[o.lovRetValue]);});
t.val(o.sessionValue).trigger('change').show().parent().find('div.ui-autocomplete-loading').remove();
return t;
function lAppendOpt(t,l,d,r){
var o=lCreateOpt(d,r);
if(l){
var g=lGetOptGrp(t,l);
if(g){g.append(o);}
else{t.append(lCreOptGrp(l).append(o));}
}else{t.append(o);}return true;
function lExists(p){return(p.length==1);}
function lCreateOpt(d,r){return jQuery('<option/>').val(r).html(d);}
function lCreOptGrp(l){return jQuery('<optgroup/>').attr({'label':l});}
function lGetOptGrp(t,l){var g=t.find('optgroup[label="'+l+'"]');if(lExists(g)){return g;}else{return false;}}
})();Copy code and save it to file e.g called jquery.htmldbQuery.js and upload it to workspace Static Files.
Create new page and blank HTML region.
Create select list with LOV query
SELECT null d, null r FROM dualCreate On Demand application process called GET_GRP_LOV like
DECLARE
l_sql VARCHAR2(32700);
BEGIN
l_sql :='
SELECT mgr AS grp,
   ename AS dis,
   empno AS ret
FROM emp
APEX_UTIL.JSON_FROM_SQL(l_sql);
END;Place to page HTML header
<script type="text/javascript" src="#WORKSPACE_IMAGES#jquery.htmldbQuery.js"></script>
<script type="text/javascript">
$(function(){
$('#Px_MY_SELECT').htmldbLovOptGrp({lovProcess:'GET_GRP_LOV'});
</script>Where Px_MY_SELECT is your select list name.
As I did say this need you also load jQuery. Apex 4 have jQuery , but if you are on later version see e.g. this blog post
http://www.oracleapplicationexpress.com/tutorials/66
I hope this helps someone
Br,Jari
Edited by: jarola on Aug 17, 2010 8:44 PM
Same thing seems to be work also with Apex 4.0
http://apex.oracle.com/pls/otn/f?p=40323:50
But if I have understand correctly Apex 4.0 have some build in or better thing to get same result
Edited by: jarola on Aug 17, 2010 10:54 PM
copy&paste mistake corrected
Edited by: jarola on Aug 18, 2010 12:57 AM
I hope editing post all the time is ok =).
I have not test this on any other browser than Fire Fox, so all comments are welcome.
Also I have try create similar plugin for cascading lov. Sample here
http://actionet.homelinux.net/htmldb/f?p=100:85
Maybe there is this kind plugins already for Apex 3.x, I have not just seen.
Also I'm beginner with jQuery so all help and comments is needed
Edited by: jarola on Aug 18, 2010 2:01 AM
mistake in guide corrected.

Hi Matt,
which version of APEX are you currently on?
With ApexLib Framework you can have cascading select lists in normal forms, but not in a Report or Tabular Form. Also refreshing a Report when changing a select list doesn't work out of the box. You would need to add some javascript. But i think this isn't what you wanted.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

IPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <

Integration - Windows Server 2003/2008R2: Creating a login script that attaches programs to a certain user group. Upgrading to Windows 7/8

We are currently running a windows server 2003 environment with a 2003 server being the DC. We have a couple of 2008 r2 servers that are member servers.
OK...
Our users are primarily operating off of windows xp clients/workstations in which they use RDP to connect to the newer member servers that are windows 2008. With their base profile in xp I am using roaming profiles via server 2003. I am looking to begin
upgrading all of the workstations to all-in-one windows7/8 boxes partially because of cosmetic reasons(#weird) and partially because we will eventually begin using the camera options that are in the all-in-one's.
Also..I must do this one at a time as we don't have the money to do a complete overhaul of all client workstations..If that was the case, I could just redo the network and make those members servers the DC and backup DC as well as add a virtual server
in which everyone can access those legacy programs that are still needed...
As you guys know windows 7/8 boxes will not work with server 2003 and roaming profiles. The reason we don't completely upgrade to 2008 r2 environment is because we are still holding on to a legacy program that requires server 2003 and these programs are
vital to our operation.
So..broken down even further...
A: User is part of a 'LocalAdmins' group that makes them automatically a local admin upon any system within our domain.
B: User logs in to windows xp with credentials in which a tailored made per user roaming profile comes up from server 2003
C: User then logs into one of the two terminal servers via RDP with same credentials and accesses new primary application. To access the legacy applications, they merely minimize their RDP session to get back to the windows xp session.
Ultimately..
1. I'd like to begin replacing option B: with windows 7/8 all-in-ones and and have the RDP saved sessions,that talk to the 2008 member servers, as well as, a few vital ie shortcuts automatically come to all users that are apart of that "LocalAdmins
group period.
2. Setup 1 server 2003 box that runs that legacy program and allow everyone access via a Virtual Environment..
3. If they log into a windows xp box, or a windows 7/8 box, I want them to have access to the same icons.
I guess this is a lot to digest, but my question is, what script could I make that would essentially allow uniformity for both my xp workstations and newly added windows 7/8 boxes? What script could I create that would,I guess reside on server 2003, that
brings all the neccessary icons to the users that are apart of that "LocalAdmins" group despite having a windows xp, 7, or 8 workstation?

" I don't see what the issue is because a logon script will still be managed by Group Policy and will have to be applied using GP rules. In the end you still have to write the script."
You basically contradicted the smug part of your rant and multiple answers with this statement!!! You just recognized that some sort of script would be necessary if I chose to use it via group policy.
But according to you..
"It is not and has never been done via a script."
Clearly it has a section per user for a "profile path" and a "logon SCRIPT". Which warrants my creation of this post since I have currentely implemented
roaming profiles. That is how I am manipulating what users can have on their desktop because of course, we have different users that have different needs. But out of all the users, there are programs that need to be laced and seen upon immediate login.I
will consult other people as this is only preliminary planning but about half of your statements are completely unwarranted and UNNECESSARY!
This statement also proves your additional inaccuracies...
"All of the profile things are handled by Windows and have nothing to do with scripts. You define all of that in Group Policy."
That's just silly talk. I told you in my initial break down of my scenario in an entirety that I am using "tailored made per user roaming profiles" to control desktop environments not group policies in this case. But you just made an absolute statement in
saying "You define all of that in Group policy" which is completely wrong...
Do me a favor, please don't respond to this post anymore. I'd love to see if any other partner, staff or whatever mind responding. Thank you for your help anyway. I will use what is useful in your post and discard the rest.
Thanks

How to use a 'Percentofsum' function with a group selection

Hi All!
I have created a report using CR XI in which I select on certain records in a database and then further select on those records using a group selection. The displayed records in the subgroup are correct. I sum these totals of the grouping using a formula (Basically 3 formulas, one for Reset, another for the calculation, and the third for the display) since if I just use the 'built in' summary function it will still total all records that were selected before the group selection. My dilemma is that I need to get a percentage of the subtotal based on the total of that grouping. Below is an example of the layout of the report:
                                                                            __Dept %_            Program Bugt             Prgm % of Dept Bud              Cost of %_
GH#1    ADMIN                                                        100%
GF#2    LEGAL                                                                                448694                          4.22%                                 12382
GF#2    CITY MGR                                                                               445414                          4.19%                                 12294
GF#2    CITY CLERK                                                                           113075                          1.06%                                  3110
GF#2    COM PROMO                                                                          391657                         3.69%                                  10827
GF#2   CENTRAL                                                                               1430570                         13.46%                                 39492
GF#1                                                                      293406                 2829410                                                                      78105
The "2829410" is the Display formula I used to accurately calculate the listed program budget numbers. The 3 formulas I used to get that number is a Reset formula (whileprintingrecords;Numbervar W := 0;) located in GH#1, a Calculation formula (whileprintingrecords;Numbervar W := w + Sum ({@Next Year Budget Amount}, {gl_master.a_org}); ) located in GF#2, and a Display formula (whileprintingrecords;Numbervar W;W) located in GF#1. The percentages that currently display in the "Prgm % of Dept Bud" are wrong as they use the 'built in' PercentofSum function when you right click on the filed in the details section and select summary as a percentage of. I need a formula that would do the following calculation: 448694/2829410 = 15.85% and thus the "Cost of %" formula that would do the following calculation: 293406*.1585 = 12382.
I tried using a similar "Reset", "Calculation", and "Display" formulas but I cannot get to work correctly. Any help would be greatly appreciated.
Thanks!
P.S. The reason I am using a group selection is because it is easier than listing out all the accounts (departments) that I do not want in the report and that selection could change from time to time where as what is in the group selection would never change.
Sorry for long winded explanation.

Read all about it.
You'd probably have to write a little wrapper (using JNI) that passes
parameters and return values around between your C function and
the JVM.
kind regards,
Jos

ADF Tree: how to access root node after "Show as Top" selected on sub node

I am currently working on a project that using ADF tree and implementing some search/filter functionality. I need to find the java API calls to get the new root node information after UI user select a sub node in the tree and clicked “show as top"(so search are done only on the current tree. Can someone help on this?

Hi ,
In our project we require to implement ADF menu tree inside <af:menulist>.
We require to show 3-4 child menuitems inside 2 parent menus.
Home
--> Inbox
-->Search
Patient
--> Information
--> Search
Can you please tell steps to implement <af:menutree> to have child menuitems like Inbox, Search inside parent like Home ? I searched on ADF sites but not much of help there.
Thanks
Suhas

HT3349 How do you select a sub-set of cells from the entire document so you can print only those specific cells?

How do you select a sub-set of cells from the entire document so you can print only those specific cells?

There is no analog to MS Excels print range. So the next best thing is to plan your data so that you don't need to use print range. The next best thing after that is to select the range of cells you want to print, then copy, the switch to the application Preview, and create a new document from the clipboard (select the menu item "File > New from Clibboard") then select all, copy then paste to the destination (maybe an email) .
You can also paste that portion of the table into another table (or a new table) by pasting values only

Window Size for "Select a Topic" Window

Is there a way to change the default settings for the "Select
a Topic" window for the See Also control? I want the window to be a
little bigger. Right now it displays too small.
When creating a See Also control, you have an option in the
Display Options window of the wizard that allows you to choose
"Topics Found dialog." Therefore, when viewing the site help and
the user clicks the See Also control, a window displays that allows
the user to select a topic. This window is the one that I want to
enlarge just a little bit.

The only stupid questions are the ones NOT asked.
Suggest that you cross-post over in the AppleScript Forums where the AS users hang out.
The following may also be of some interest to you:
QT Full Screen Mode Widget.
QT Full Screen
Full screen QuickTime Player
10.4: Watch fullscreen QuickTime movies via Automator

*.eml Time Stamp - Select File in Windows Explorer Changes the Modified Date

The Windows Live Mail *.eml files time stamp is getting changed to the current date when the file is selected in the Windows Explorer! I save backup copies of important E-mails to folders on the Hard Drive and then synchronize them with the same folders on other LAN Hard Drives for backup archives. When these E-mail files are selected or opened from the Windows Explorer in the Windows 7 OPS the Modified Date Time Stamp is changed to the current date automatically! This action creates a real problem when doing later synchronizations of all of the folders! The date will not be the original date of the E-mail and the original file will be over copied with the file with the newest date stamp. I stopped Indexing on the *.eml files and that stopped the time stamp change when overcopy synchronization, but if the file is selected during a viewing in Windows Explorer then the Time Stamp is updated to the current date again! A solution to this problem would be greatly appreciated if anybody knows of one. Thanks - - - Shorto

The Date and Timestamp changing issue in Windows 7 has a two part fix!
1. Disable the Indexing of the *.eml file type in the Indexing Options located by Clicking on "Control Panel" - "Indexing Options" - Advanced Button - File Types Tab - scroll down to the .eml file type and uncheck the Box then click OK to finish, so
that the Email type of files won't be Indexed.
2. Delete the Registry Entry listed below, be sure to Export and Save the original Key so it could be Restored if something goes wrong! \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers
and Delete the .eml entry
That should fix the problem with the changing Date/Timestamp of Email Files. For more information read CarlS's WindowsSeven Fourm thread where I also have more input:
http://www.sevenforums.com/browsers-mail/35334-eml-files-timestamps-updated-constantly.html
This should give you a better understanding on the problem and the Fix. - - - Shorto

Group selection in sub-window... e.g. to move

Similar Messages

Maybe you are looking for