Group set up and transfer from Entourage

I imported my contacts list into mail, but it failed to import my group lists. I have several large group lists that I need to send email to, but I don't necessarily need them clogging up my mail contacts list-I don't even really have names attached to the emails-but could find them if I wanted to look them up. 1. Short of cutting/pasting 350+emails from Entourage into Mail, how can I set up a group?
2. Can I do this without having to create 350+ cards that would clog my contacts list?
thanks!
Karen

I just talked to someone on Apple Care who said you can't import group lists from Entourage. Neither is there a way to make a group list without entering them as a contact.
And more bad news is that you can only use one email per contact. This causes problems for people like me who place couples as one contact with two separate emails. Address book will store all the information, but Mail will only let you select one email address.

Similar Messages

Must I "Log and Transfer" from Canon HG 10?

I have a Canon HG 10 (which is an HDD camcorder) and I'm using a 2.2 ghz macbook pro with OS 10.5.6. I can open the camera's disk image on my desktop and copy the "AVCHD" folder to my hard disk, and everything seems to be there. Question: can I simply navigate to the video clip folder and import the clips into FCE, or would it be more complicated?
In the past, if I copy the "AVCHD" folder to my hard disk, and then make a disk image out of it, imovie has treated the disk image like a camcorder (I haven't tried this yet with FCE), but I'd rather not have to make the AVCHD folder into a disk image-- doesn't seem like this should be necessary. Thanks

I want to keep a duplicate of the camera's information, before it is imported into FCE. I can log and transfer from the camera, but I'd like to keep an exact duplicate of the video camera's disk information on another hard disk even after it has been deleted from the camera. Also, it seems to not take nearly as long to open the camera's disk image and copy the files than it takes to log and transfer into FCE, from the camera, so apparently I don't have to keep the camera connected to the computer as long as long as I can retrieve the files from the copy later.

Log and transfer from MRC1?

Trying to log and transfer from my MRC1. Ive downloaded the plug in. When I pull up log and transfer and try to " add custom path " Im selecting sony plug in device, I assume this is correct. Sony plug in device then appears in top line of new window but under that the video info is not highlighted it is dimmed out, like it is not available to select. Any help would be appreciated.

Try using MPEG STREAMCLIP
Transfer your files on your desktop and convert them.
This I what I do with those type of cam

Importing emails, signatures and contacts from Entourage

I've been trying to find a way to import emails, signatures and contacts from Entourage to mail. I want to change accounts so I can eventually use mobileme in the office I'm working at but don't want to have to go through the arduous process of having to copy everything manually into mail.
Has anyone found a fool-proof way of doing this yet ?
Thanks & cheers, Jan

Just imported everything myself for Entourage X a few weeks ago.
iCal will directly import Entourage's calendar.
Address book can be done to ways. In Entourage, open Address book, under the file tab select export contacts. This will save a .txt file on the desktop which can be imported by mail. Another way is to create a folder on the desktop, then highlight and drag all Entourage contacts to the folder which can also be imported. Either way, if you have more than one email address per contact, you may have to cut and paste those manually.
Mail will import email from Entourage directly. I had to import several times to get everything. In Mail under the File Tab, just click import mailboxes and select Entourage. Another window will open and you are able to pick which Entourage folders to import. All are selected initially.
As far as signatures, you most likely will need to cut and paste those manually.

Log and Transfer from Canon Legria HF M36

Hello everyone,
I write from Italy.
I have a big problem. I can not successfully import video clips from my camcorder Canon Legria HF M36 into Final Cut Pro using Log and Transfer with any setting. If I get same clips in iMovie 09 I get clips into Apple Intermediate code, good. If I use the same clips in Final Cut Pro 7.0 video looks rough. I do not know what to do. Who can help me?
Thank you very much
Giovanni Losacco

That camera is confusing me when I look it up on BandH. Is it HD or SD?
It sends to SD card, yes? What format are you bringing it in as? I'd try Apple ProRes LT to start. See if that works.
CaptM

I found an old iPod classic of mine. It's not synced to my new MacBook Pro. How can I get the music and photos off of it and on to my new computer? When I plug it in to my new computer it wants to erase what is on it and transfer from my new computer.

I found an old iPod classic of mine that is synced to a computer that is long gone. I want to get the music and photos from this old iPod onto my new computer. Every time I hook the iPod up to my new computer it wants to delete what is on the iPod and replace with the contents of the iTunes that is currently on the new computer. I don't want to do that. I want to keep what is on the old iPod and transfer it to iTunes. Any help? Thanks!

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Can I clone and transfer from the internal hard drive to an external hard drive ?

I got an intel duo iMac, the machine is very good even if it is almost 3 years old. But with the internal hard drive having 320 Gb I am running out of hard drive space. I have looked into changing the internal hard drive but that involves having to send the machine away to have that done. So I was wondering if I could just transfer all the Mac OS X and all the applications and settings within three user accounts to say a 2 TB external hard drive, and boot from that, using cloning software.
Alternatively, is there a way to transfer the iPhoto and iMovie libraries to an external hard drive. That would free up space. I do not know how, if that is possible, although I have managed that with iTunes. My iMac is running Snow Leopard.
Regards from John5801

John,
USB should be fine for general computer use, but media may add a little too much for the sustained rate that USB2 provides. In a previous career I did a lot of video editing. Firewire was much preferred in that task because of its stability at higher rates. I can see why the SuperDuper! people might suggest it.
When I cloned the wife's iMac, I had replaced the HDD on the MacBook Pro with a USB pocket drive that I've kept the original MacBook's installation mounted on. I've booted directly to that external drive, so you should be okay if you can make the clone across the USB. When I cloned the wife's machine I booted the MacBook Pro with a fresh HDD in Firewire target mode and connected it as an external Firewire 800 drive. Firewire 800 is much faster, but you'll need the cable and everything to be right.
Firewire has a better reputation among people running a lot of media from their drive. I would suggest that you try and get an external drive kit that can support both. I think your iMac supports both firewire 400 AND firewire 800 along with the 3 USB2 ports. I'm guessing based on my wife's 24" imac. The fastest would be the Firewire 800, but that standard is about to be pushed aside in both cases.
Hope that helped.

Importing Mail and Addresses from Entourage

Can anyone tell me how to do this? (How to export from Entourage, then import into iCal and Address book)?

Users --> YourUser --> Documents --> Microsoft User Data --> Office 2004 Identities

Log and Transfer from network volume causes FCE to crash

I have copied the contents of an SD taken from a Canon HF100 to a volume mounted on my network. Originally, this was only intended as a means of back-up but I found I needed to capture additional footage so I navigated to the volume in the Log and Transfer window and began ingesting clips. The first clip worked just fine but the Log and Transfer window hung about 1/3 of the way into the second. I can preview all the clips in the L&T window but the program crashes when I ingest. The clips vary in length but that does not seem to be a factor in the problem. I tried this on both a Tiger machine and a Snow Leopard machine with the same results. iMovie was able to ingest the footage over the network without the same problem. Ultimately I moved the footage back to a local drive and transferred from there without any issues at all. This issue involves a great many layers but if anyone has had a similar issue I would be interested to hear.

We just had a longish discussion about networks and capture/editing.
Bottom line:
The slowest component in the network stream is the speed the network runs and not necessarily both ways. Check the specs of your specific gear.
I suspect this to be your problem. Here's a short extract.
Networking Limitations:
* When accessing the WD My Book World hard drives remotely using MioNet/WD Anywhere Access, please be aware that the transfer rate will be limited by whatever the slowest connection is. For instance, upstream rates for home users is typically no more than 512Kbps, even if the downstream rate is 4Gbps.
* If there is heavy I/O load put on the network and WD My Book World hard drive, it is recommended that a static IP address be used rather than DHCP.
Another thing of note was to use CAT 6 cable.
Al

I'm trying to log and transfer from a pro res file (HQ) final cut s7 is telling me it is an unsupported format. What the?

i have a 58 min pro res hq file that is a .mov. it is in a folder on my hdd. i'm trying to syn rushes by logging and transferring clips from this file but i cannot bring the said file into log and transfer. final cut putsup a window that tells me the file is in an unsupported format. and to bring in a file with a supported pathway. this i do not understand. any simple explanation as to what i'm missing?

Thanks meg. I'm trying not to have to sync all the rushes in a timeline. All rushes are in the one 58 min prores file. I wanted to, I guess, log and capture the rushes as clips that I logg in the log and transfer winnow and that it would then log and sort out the material as proxy files. I'm guessing I'm just being lazy or it can't be done. Thanks for the reply but I was looking for a differentbway round than a straight import of the whole file.
M

Migrating Accounts and Notes From Entourage To Mail

Now have Leopard and have started to migrate all my mail files to Mail 3.0. That seems pretty easy just use import.
Is there a way to automatically import account info or does this have to be done manually?
Is there a way to import my Entourage note files into the new Mail notes.
Tks

After you sync with Address Book, and you uncheck the Sync in Entourage, they will not be deleted from Address Book.
For email, open Apple Mail, File Menu, Import Mailboxes..., then choose Entourage.
Or you can drag each folder from Entourage onto your drive, which makes a ".mbox" file which is compatible with many different mail programs. You can import those into Apple Mail (or into Thunderbird, or into Outlook Express, etc.).
You can also use a Gmail account, using IMAP (not POP), and drag'n'drop the emails from Entourage into that, then connect to it from Apple Mail and have them back.
Killing off Entourage is harder. Assuming you don't want to uninstall Office, you'll at least need to go to System Prefs, Accounts, and delete the Login Item for the Microsoft Database. I'm not sure what other steps may be necessary.

Log and Transfer from Canon HFs100

I have connected my Canon HFS100 via usb cable to my mac and am able to use log and transfer to import/convert most of the clips. The problem I have is that it will not convert about 10% of the clips for some reason.
I am able to view and play the clips that are not able to be converted in the player in the log and transfer window, but when I add them to the queued section to convert them it tries to convert them and then fails. I get the Red Stop sign with exclamation point.
All video was shot one after another and nothing different was done.

Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
Note: For FCP 7 the file will be called "Final Cut Pro 7.0 Prefs", obviously.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. I

Log and transfer from HDR-SR11 Sony

Dear All,
I am trying to import a video from a HD CAMERA HDR-SR11, but the size of the imported video is too heavy, I am getting 1GIGA per minute. Does anyone know how to reduce the file size during the importing process, perhaps reducing the quality?
The format that I am getting is Apple ProRes 422, 1440 x 1080 (1920 x 1080), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz.
Thanks a lot for helping.
All the best,
Nicko
Message was edited by: San Nickolasito

Shouldn't be the same size of the file in the camera?
Hey Nicko,
No mate. The camera format is a heavily compressed MPEG4 variant (AVCHD). This is a modern acquisition format, and not a camera native edit format supported directly within FCP. The AVCHD support offered by FCP is through Log and Transfer which transcodes the files to a more edit friendly format that you can work with. The choices at present are AIC and ProRes. You could recompress them again if you wanted to a more compressed (smaller) format, but you'd lose time and quality, and disc space is cheap these days.

Log and Transfer from FTP?

I am trying to Log and Transfer video from an FTP connection. Unfortunately, FCP does not seem to be able to accept my CyberDuck connection as a valid path.
Is there any solution out there that will allow me to directly Log and Transfer video from an FTP server?

Thanks for your response.
Downloading first works fine; I'm just trying to avoid that additional step.
I also don't want our editors to having to deal with an extra version of the material. Is there a 'delete after transfer' option somewhere that I'm missing? That would at least take care of the extra version problem.

Log and Transfer from HDD question

Hi, I am trying to capture footage from my friend's HDD camcorder (JVC GZ-MG30U) which is connected to my MacBook Pro via USB cable. When I select Log and Transfer I do not see any clips displayed in the window. iMovie seems to have no trouble displaying the footage. Thanks

Thanks Tom.
Any harm in doing it pretty frequently? Not that i'd definitely need to. But i'm wondering if i'd have issues with permissions or anything else from "installing" and "uninstalling" it a bunch of times.
As a side note. The HD video quality is fantastic now tht i'm actually able to use the video from the camcorder. However, these renders and transfers take quite a while! I wonder how much more efficient a MBP would be. Hmmm.
Thanks again for the help. I definitely would have never guessed that!
-Nick

Group set up and transfer from Entourage

Similar Messages

Maybe you are looking for