Group sms failed - which recipient?

Hello,
I hope you can help.
I have the iPhone 4 with iOS 4.2. When i send a group sms and it fails to one person, how do i know which one?
I have a friend who has lost his phone, so presume its that one but how do I know?
Its the only flaw i have found on the iPhone, love everything else about it
Thanks in advance
Chris

I have a friend who has lost his phone, so presume its that one but how do I know?
ask them.

Similar Messages

The processing of Group Policy failed. Windows attempted to read the file...

Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.

Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again!

Processing of Group Policy failed - User Policy - Windows 7

OP:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/191f1ee1-a551-446b-9808-ff66a952bb25
When running a gpupdate I get the following message:
Updating Policy...
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows could not authenticate to the Act
ive Directory service on a domain controller. (LDAP Bind function call failed).
Look in the details tab for error code and description.
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
This only happens on one computer under a certain account; other accounts work fine and the problem account works fine on other computers. Therefore the problem is located on the Windows 7 computer.
I have tracked it down to an LDAP error code 49.
I tried the MS sollution (http://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx) but the credentials are sound.
I can also connect to the DC with LDP.exe fine.
Here are the diagnostic read outs (GPResult was too long to post):
Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          2/29/2012 1:56:09 PM
Event ID:      1006
Task Category: None
Level:         Error
Keywords:
User:          Domain\UserAccount
Computer:      Win7-ComputerA.FQDomain
Description:
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller. (LDAP Bind function call failed). Look in the details tab for error code and description.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1006</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2012-02-29T19:56:09.732842600Z" />
    <EventRecordID>32458</EventRecordID>
    <Correlation ActivityID="{CECE6DDC-E7CC-4563-8109-E62382F645D4}" />
    <Execution ProcessID="984" ThreadID="3688" />
    <Channel>System</Channel>
    <Computer>Win7-ComputerA.FQDomain</Computer>
    <Security UserID="S-1-5-21-416373151-1271962822-2142307910-40105" />
</System>
<EventData>
    <Data Name="SupportInfo1">1</Data>
    <Data Name="SupportInfo2">5012</Data>
    <Data Name="ProcessingMode">0</Data>
    <Data Name="ProcessingTimeInMilliseconds">1326</Data>
    <Data Name="ErrorCode">49</Data>
    <Data Name="ErrorDescription">Invalid Credentials</Data>
    <Data Name="DCName">
    </Data>
</EventData>
</Event>
Windows IP Configuration
   Host Name . . . . . . . . . . . . : WIN7-ComputerA
   Primary Dns Suffix . . . . . . . : FQDomain
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : FQDomain
                                       ParentDomain
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : FQDomain
   Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
   Physical Address. . . . . . . . . : 00-21-CC-5F-CF-DF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 216.71.244.28(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Wednesday, February 29, 2012 12:38:25 PM
   Lease Expires . . . . . . . . . . : Thursday, March 01, 2012 12:38:24 PM
   Default Gateway . . . . . . . . . : 216.71.244.1
   DHCP Server . . . . . . . . . . . : 216.71.244.2
   DNS Servers . . . . . . . . . . . : 216.71.244.2
                                       216.71.240.120
                                       216.71.240.132
   Primary WINS Server . . . . . . . : 216.71.244.2
   Secondary WINS Server . . . . . . : 216.71.240.130
                                       216.71.240.122
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
   Physical Address. . . . . . . . . : 8C-A9-82-B0-67-E8
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Hi,
It sound like port blocking issue, Seems your client system connecting 216.71.240.x DNS Servers as a logon server and which seems on different subnet
as per subnet mask, So there must be a router or firewall in between and so it might be Active directory ports are being blocked.
So first for testing purpose just remove other
216.71.240.x DNS
servers from TCP/IP configuration and clear dns cache
ipconfig/flushdns
and restart the system. check if it works.
or run this command on DC
dcdiag /test:dns
and share the error report.
Cheers!
Sanjay

The processing of Group Policy failed because of lack of network connectivity to a domain controller

We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?

1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol>

DB installs fails with [INS-30060] Check for group existence failed

Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jean

thks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean

Deprovisioning AD Group Assignment fails when setting MX_INACTIVE

Hi,
IdM 7.1 SP5 Patch Level 2
We have an Identity which has some AD Group privileges assigned to it via a role. So these privileges exist as MX_AUTOPRIVILEGE attributes on the identity.
If we remove the role, the privileges are removed and the SAP provisioning framework task DeprovisionADSGroupAssignment works ok.
If we set MX_INACTIVE, de-provisioning is triggered for each repository but the task DeprovisionADSGroupAssignment fails because it cannot determine the DN for the AD groups from the privilege master records.
My analysis so far has deduced the following:
The SAP provisioning framework task DeprovisionADSGroupAssignment uses a javascript sap_getGroupDN to determine the DN value for the ad group. It uses the audit record's UserId field to determine which old_id to read from the MXIV_OENTRIES table. The audit record UserId has the format: e.g. #15:DELETE;0;205081 i.e. attribute 15 on our system is (MX_AUTOPRIVILEGE), the operation is DELETE, the checksum is 0 and the OldValuesId is 205081.
From there the script uses the mskey of the privilege to look up the DN<repository name> attribute on the privilege master. This DN is then used in the To LDAP pass to remove the identity from the AD group.
So unless you actually remove the privileges from the identity, the values don't exist in the MXIV_OENTRIES table and therefore, the script cannot find the mskey for the privilege and therefore cannot get the DN.
Does anyone know if setting MX_INACTIVE is supposed to remove roles and privileges before triggering de-provisioning or how this is designed to work?
Has anyone else de-provisioned AD accounts and groups by just setting MX_INACTIVE?
Edited by: Paul Abrahamson on Dec 3, 2010 5:54 PM

We've now set up a scheduled job to pick up all users which should be made inactive on a given day and this job first removes roles and privileges (triggering de-provisioning of AD groups because the privileges are removed) and then after a while sets the MX_INACTIVE attribute.
Incidentally I also found this [SAP Note 1540835 - LDAP group assignment fails due to ambiguous bchecksum |https://service.sap.com/sap/support/notes/1540835] which 'corrects' some logic in the sap_getGroupDN global script - it now uses context variables instead of reading the MXIV_OENTRIES table etc...

Page group export failes with error

When i try to export a pagee group, it fails with the following error:
[22-SEP-08 11:43:30][Error: (WWU-74554)] context = wwutl_api_export_provider.start_export user = ORCLADMIN An unexpected error has occurred, which has caused the entire provider export to be rolled back.

I just tried this on a 9.0.2.2.14 version and was able to add, delete, and add again witout an error. It is possible that there was some kind of error during the delete which caused a row in the DB to remain. Unfortunately, there is no way to be sure without delving into the tables and looking for the 'deleted' page group. Not recommended unless absolutely critical. Given that the display name is what is typically shown in most screens, is it reasonable for you to name the new one X1 with a display name of X? If so, that's the safest bet.

I send a group text, and it makes it a MMS text. how do i send a group SMS text?

when i send a group text out, my phone shows it as a MMS text, which some can't receive. how do i send out a group SMS text?

See what happens if you go into Settings>Messages and turn off Show Subject Line. Also try turning off Group Messages---you'll still be able to text multiple people at once, definitely, I think it's just that the phone just doesn't thread replies as well (I'm not sure what Group Messages does, really).
I know that turning off those two settings fixed my friend on a basic Sprint phone getting my plain text messages as MMS, though I don't know whether it's one or both that causes the issue.
EDIT: Okay, based on this article, Group Messages is like a sort of multiple person chat room, so your recipients can easily reply to all. If you need that, then you can't fix the issue (though the comments show a bunch of ways that could go wrong).
http://www.moxiemoshow.com/group-messaging-iphone/
But you don't need the fancy chat-room feature of Group Messages to send texts to multiple people, so it depends on what kinds of texts you are sending.

Lumina 710 cant send group sms or picture messages...

hey all, anyone know why i cant send picture messages or group sms with the 710?
i am with TPG they said its because of the apn settings, i have set them and it didnt work...

Try to switch the Flight Mode on and back off. Also, if phone is connected to WiFi when attempting to send a picture message of group SMS, this may also affect the connection so turn it off then try to send an MMS or group SMS. If these did not help, try below possible solution.
Turn off the Group Text feature in the Messaging app.
On the Start screen, tap on Messaging tile.
Then tap the three dots (...) in the lower right hand corner of the screen.
Open Settings.
Slide Group Text to off.
The Group Text feature attempts to keep the messages in one chat thread by using MMS, when this feature is off, your messages to a multiple people are included in a separate threads.
Failure of this feature to work though means your MMS settings are not correct. Either contacts your carrier up for the correct settings for your phone or go to the Store, and download and install the Network Setup application which can be found in the Nokia Collection.

Group Messaging failing since iOS 8.0.2

I have a couple of apps installed via apple store for sending group sms. e.g Group, Easy Group etc. These app are free ordinarily but to take advantage of some other features, I upgraded to the premium version.
However, since I upgraded to iOS 8.0.2, these apps and a couple of others have been failing to send out group messages. It's a shame that Apple has not provided these feature in the default Message app. I send out sms daily to groups (some having over 300 contacts). Can anyone help?

Hello geexman,
Thank you for using Apple Support Communities.
The following article should provide you information on resolving issues with third party apps you have installed on your devices:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Regards,
Jeff D.

Processing of Group Policy Failed - Single DC error 1058

I have been getting the error every 5 mins for awhile:
The processing of Group Policy failed. Windows attempted to read the file \\xx.company\sysvol\xxx.company\Policies\{0000000-2323-2222-2222-333333}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this
event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
So - this is a single DC 2008R2. It started (I think) back when I joined another server on the domain and did a DCPromo to help build some redundancy. DFS was/is not enabled, do I need to set this up to resolve this?
User are able to login and policy are working, I only see this error on the DC, but other than the error everything seems to be working fine. I can access the share \\xx.company\sysvol\xxx.company\Policies\ and see it from all systems on the domain.
I looked for the Burflags to see if that would help but since there is no DFS there was nothing in the registry.
So at this point, I removed the secondary server via DCpromo, going back to just the 1 server DC but I still get the error. DNS works. When I do a DCDiag everything looks ok except the SysVol - I get about 10 of these
Starting test: SystemLog
An error event occurred. EventID: 0x00000422
Time Generated: 03/17/2015 14:49:41
Event String:
The processing of Group Policy failed... blah blah - same as above.
I looked at this link because of the combination of the 2 errors - Error 1058 and 00422 but its suggesting Authoritative restore, but I don't have the replication.
Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
So - any suggestions? Thanks in advance.

Hi,
>>Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
Did we clean up the metadata of the removed domain controller? If not, we can follow the article below to do this.
Clean Up Server Metadata
https://technet.microsoft.com/en-us/library/cc816907(v=ws.10).aspx
Besides, on the existing domain controller, check Applications and Services Logs\FRS or DFSR logs in Event Viewer. If the issue persists, we can follow the method below to do an authoritative restore for Sysvol.
If we use FRS to replicate Sysvol, we can try to follow the article below to an authoritative restore for Sysvol.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
https://support.microsoft.com/en-us/kb/290762
If we use DFSR to replicate Sysvol, we can try to follow the article below to do an authoritative restore for Sysvol.
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
https://support.microsoft.com/en-us/kb/2218556
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

IMessages not converting to SMS messages when recipient not in wi-fi area / out of credit

I have an iPhone 5s (iOS 8.1.3) and my daughter and iPhone 4. She often texts me without problem. BUT if I try and reply and she is not in a Wi-Fi area or has run out of credit, the message (in blue) says that it has been delivered but she doesn't receive it. The only way I can send a message to my daughter is to switch off iMessage and try again and send it as a SMS message - which is surely not how it's meant to be? Other friends that are also iPhone users who are unaware of this problem so she doesn't get all her messages until back in a wi-fi area - which as a teenager is really annoying!
I do have the settings "Send as SMS" switched to on - so in theory my daughter should get a SMS as a minimum?
I have reset my phone and the network data but nothing has changed. My daughter is quite fed up on missing out on her messages.
Any ideas?

Solution found. It was simply that the Cellular data was switched off on my daughters phone.

Hi frnds, I just purchased Ip4 and upgraded to ios 7 but it become slow and i cant find any group sms option.

Hi frnds, I just purchased Ip4 and upgraded to ios 7 but it become slow and i cant find any group sms option.

Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

Group name in which a particular user is member

Hi all,
I would like to be able to get the group name in which a particular user is a member.
I have created 2 groups: CHEFS and EMPLOYEES.
The Chefs are members of both groups. The "normal" Employee is the member only of EMPLOYEE group.
I have the navigation plsql portlet. And I would like to enable any links of this portlet only for chefs. At default these are disabled.
Now I make it with the function get_user_group:
=========================================
create or replace function get_user_group
v_username IN VARCHAR2,
v_groupname IN VARCHAR2
return boolean
as
var_groupname varchar2(50);
begin
select upper(name)
into var_groupname
from portal.wwsec_group
where id in (select group_id from portal.wwsec_flat
where person_id in (select id from portal.wwsec_person
where user_name=upper(v_username)))
and name=v_groupname;
return true;
exception
when no_data_found then
return false;
end;
=====================================
But the user needs DBA privileges to select on the tables of PORTAL-User.
I don't want to give this privileges to user.
Is there any other way to get the usergroup?
Regards
Leonid Pavlov

There are portal API's that look like they would do exactly what you are asking for. Take a look at the wwsec_api functions, specifically, is_user_in_direct_group or is_user_in_group in http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/D:/PDK/pdkjuly/pdk/plsql/doc/pldoc_9026/index.html.
These API's are specific to 9.0.2.6. You'll have to ask someone who knows other versions if you are running something else.

Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.

Hi All,
Last week we face problem on SQL server 2005 Cluster server.
SQL cluster was down with below issue.
Event 1069 : Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Event 19019 : [sqsrvres] CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
Kindly any one provide resolution for my above issue.

I have checked in event viewer Application error side error:
Event 19019 : [sqsrvres]
CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
System error :
Event 1069 : Cluster resource 'SQL Server' in Resource
Group 'MSSQL' failed.
Before this no error is there in event viewer

Group sms failed - which recipient?

Similar Messages

Maybe you are looking for