Group Text Issues with Sprint users

When I send a group text, anyone receiving the text on a Sprint phone gets an empty conversation bubble. The same is true when I respond to a group text that includes Sprint users. All other non-Sprint users can see my messages and replies. I have an HTC One and my default messaging app is Messages version 6.5.798297. Any idea how to fix this?

That is a sprint problem. Have them call Sprint.
If the others are getting them, and it means you are sending successfully then its not a Verizon issue.
Support starts here - Customer service
Good Luck

Similar Messages

Text chat with Trillian users = DSL crash every time

Hello all,
I'm running iChat 3.1.8 (v445) on an iBook G4 running OS 10.4.9, with a Zyxel Prestige 600 series modem.
iChat works fine for me...until i begin text chatting with Trillian users. The result is always the same: The first time they chat with me, whether they initiate the chat or respond to my initiation, my DSL crashes. Once I wait for my DSL to cycle or switch to stealing my neighbors' wireless, it works fine for the most part, though I do experience periodic DSL crashes after the first crash.
Every single time. I've tested this with various friends, and it is only happening with Trillian users.
I've got my built-in firewall on, with ports 5060, 5190, 5297, 5298, 5678, and 16384-16403 open for both TCP and UDP.
I'm logging onto an AIM account on login.oscar.aol.com on port 5190.
TIA for any help offered.

Hi sbcreducer,
At one time it was possible to bring down a web server by many people getting organised and all trying to get the same page at the same time. This was called a Denial of Service attack (DoS)
Nowadays many modems and routers have protection against this even though you may not even be allowed by your ISP to run a web server from your end. (Your own web pages for instance)
This protection comes in about three main ways but essentially they monitor the amount of data coming to the modem or router (and request for a web page still means data in coming to make that request) and then cut the flow of data to stop you losing the internet connection.
One method is called Stateful Packet Inspection (SPI)
Another is Quality of Service (QoS) and lastly
Denial Of Service (DoS).
Now as to where this seting is on each manufacturers device is a bit of a guess.
In these pics at Port Forwarding.com of a Linksys, in the third pic of the Linksys you can see it in Gaming and Applications as a sub tab (near Port Forwarding but to the right)
On my Netgear it is on the WAN page and Called DOS.
On some Netgears it is on the same page of the Setup pages but called SPI
USing this site http://portforward.com/routers.htm you can look up your device.
Click on it.
At the next page select iChat from the list.
AT the next page it will tell you the default IP address the device is likely to use and the Default USer ID and Password so you can gain access to the set up pages via a web browser.
After that it a question of checking all the menu items to see if you have it.
Check anything that says Filters, and Firewalls as it can be regarded as a second level firewall, as well as the places I suggested above.
Not all device have this of course.
7:14 PM Friday; April 13, 2007

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Group texting issues

My IPhone friends have all checked the appropriate SMS boxes in IMessage but I still dont see the replies to group messages. What can I do to fix this??

Agah,
Help has arrived! When did this issue begin? Have the iPhone users attempted to disable the iMessage feature and test again? Are they still able to receive your responses to them? Are they receiving any error messages when sending a group text?
EfrainM_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Firefox issues with multiple users on a single computer.

I have an issue with Firefox and multiple users on my computer. There are two users setup and I'm running Win7 Ultimate x64. When the other user logs in, my settings in Firefox get screwed up somehow. Even if that user does not open Firefox.
Examples of problems this causes:
Gmail - Cannot load the standard interface, however it will load the HTML only interface.
Facebook - Cannot post anything.
vBulletin Forums - Some forums will no longer normally load - a text-only version loads as if I was browsing from a mobile device.
There may be other issues, but these are the main ones. If I clear my cookies, cache and browsing and download history, then restart Firefox, everything works again.
This seems to happen most often when the other user logs in, and uses Firefox to log on to their Gmail account.
How can I fix this?

Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Issue with "unknown user type 6" on Coherence 3.5.2

Having an issue with a cluster which is running using an internally developed cluster starter tool. This tool, and the associated cluster, all use POF, and upon attempting to connect a non-storing member to the cluster from java, the following exception is raised...
2011-07-11 15:54:58.338/2.469 Oracle Coherence GE 3.5.2/463p2 <Error> (thread=Cluster, member=n/a): This cluster node is
configured to use serializer com.tangosol.io.pof.ConfigurablePofContext {location=application-pof-config.xml}, which ap
pears to be different from the serializer used by Member(Id=1, Timestamp=2011-07-11 15:34:30.779, Address=10.74.82.193:8
088, MachineId=11188, Location=site:INTRANET.BARCAPINT.COM,machine:ldnpsm020006423,process:80976,member:ldnpsm020006423:
cacheserver:1).
java.io.StreamCorruptedException: unknown user type: 6
at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3289)
at com.tangosol.io.pof.PofBufferReader.readObject(PofBufferReader.java:2600)
at com.tangosol.io.pof.ConfigurablePofContext.deserialize(ConfigurablePofContext.java:348)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ServiceConfigMap.readObject(Grid.CDB
:1)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$MemberConfigResponse.read(Grid.CDB:1
3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:123)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify(ClusterServi
ce.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
There is no serialiser configured in the cache config, instead we just set tangosol.pof.enabled=true, and set the pof config file to what is seen above. The thing which is very confusing about this error is that unlike other clients which we connect, and in fact the servers they connect to, this client never attempts to load the cache configuration file. The point at which this should happen, prior to pof loading, shows:
2011-07-11 15:54:57.260/1.391 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=Main Thread, member=n/a): Loaded cache conf
iguration from "jar:file:/C:/Program%20Files/Oracle/coherence/3.5.2b463P2/lib/coherence.jar!/reports/report-group.xml"
I have tried every combination of classpath entries I can think of, and no matter what, it never shows an attempt to load the application-cache-config.xml supplied in the startup. Does anyone have any experience with something like this?

I guess your non-storing JAVA code does not specify -Dtangosol.pof.enabled=true and the -Dtangosol.pof.config =<POF file location> on joining the cluster. Post the startup java command and the complete logs.
If application-cache-config is not loaded then coherence-cache-config.xml should be loaded by default and set -Dtangosol.coherence.cacheconfig=<application-cache-config>
Cheers,
NJ

Linking/Grouping Text Fields with a Check Box Field

Disclaimer: I know nothing about coding/scripting in Acrobat (or in any language, for that matter).
I have 4 sets of text fields, call them A, B, C, and D. All of the fields in set A will have a value entered. There are 10 fields in set A while sets B, C, and D may have as many as 104. Sets B, C, and D will always have a one-to-one-to-one correspondence with each other (B1 is associated with C1 and D1 only and so on). My dilemma/desire is two fold:
First:
I want to be able to group 3 to 4 of the fields in set C if I tick a check box/radio button/whatever field type works. When the fields are grouped, I want their values to be the same within the grouping. These fields should also be ungrouped when the marker field is unchecked/deactivated. No field will ever be in any more than one group.
Second:
I want values for set B to equal a value of set A if there is a value entered in that B's corresponding C field.
Please don't hesitate to point out where I can make any of this clearer.
Thank you in advance,
Joseph
P.S.
If one or both of these is not doable in Acrobat, would you please kindly point me to a program that can do this?

Steve,
Sorry, I referenced InDesign and this file was created in Illustrator. (I have been working with numerous files created in both InDesign and Illustrator, with numerous challenges). I do not have the native document nor Illustrator software, only Acrobat. When I previously loaded the InDesign-created pdf file(s) into Acrobat, I was unable to use the Text TouchUp Tool because I do not have the fonts on my system that were used to create the documents in InDesign, thus I am denied access to the text. With this file, created in Ilustrator; I assume because the text resides within the image created that encompasses the entire page, the Text TounchUp Tool and Object Tool have no response when I click on the page after activating the tools with a click, although the Tool Bar allows me to click on the icons to activate the functions.
I have read elsewhere that InDesign and Illustrator files are exported as images, thus requiring either Photoshop or Illustrator to fully edit outside of the originating software. However, I was hoping that I could create interactive forms by overlaying fields with Live Cycle Designer - I did not anticipate the default setting of the check box labels being unchangeable. Sounds like I am at a dead-end with this issue??
Linda

Email issues with PC users

I am a web project manager and email daily with both PC & Apple users. I use Apple Mail as my default program. I have had countless issues with the formatting of my email appearing differently to PC users on Outlook when sending or forwarding Rich Text emails. I try to stick with plain text but sometimes Rich Text is required.
My current issue is orphan "B" characters are appearing through out the body of my email text when sending or forwarding Rich Text emails to PC users. This is NOT visible at all in my Apple mail program. This does not occur in plain text. I recently switched to sending in UTF-8 format - could this be the issue and if so what is the best solution.
I am interested in feedback on the best way to efficiently communicate with PC users using mail and what the appropriate configurations to do so would be. I really don't want to have to switch from Apple mail to use another program but when dealing with co-workers and clients who are not tolerant of these errors I must find a solution.
Thanks in advance to anyone that can help!
Powerbook G4 (1.67 GHz PowerPC) Mac OS X (10.4.8)

current issue is orphan "B" characters are appearing
through out the body of my email text when sending
or forwarding Rich Text emails to PC users. This is
NOT visible at all in my Apple mail program. This
does not occur in plain text. I recently switched to
sending in UTF-8 format - could this be the issue
and if so what is the best solution.
See this note and see if Fix C helps:
http://homepage.mac.com/thgewecke/woutlook.html

Issue with create user and issue with Java Development tab

I have two issues with EP,
1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

Hi Adi,
by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
Regarding your second question: You will find the java development role in PCD
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
If not, then you haven't installed the PDK business package in your portal.
Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
Best regards,
Martin

Video group call issue with chat

when i'm on a one-on-one call with someone, i can use my video and chat with them just fine
but when they add me to group calls, i cant turn on my camera and i can't send typed messages in the chat window
i have the most recent version of skype, i've even uninstalled and reinstalled and it still wont work

If there are more than 10 persons in a chat, Video will be unavailable. This is aknown bug and will be fixed in the next incremental version of Skype.
For text, type /get name in the groupchat, if it returns #skypename your in an old p2p chat that your client might have issues with, if the return is 19: , your in a new cloudchat, and in theory all should be good.
Post 6.21 clients have issues with p2p chats, and pre have issues with cloud ones. I'm including the 6.21 installer link so you may downgrade if you find it necessary:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

HT202724 Group Text Issue/Email Issue

A week ago I switched the icloud email account on my Iphone 5C from an email address that I never used to one that was already being used on my Ipad Mini and Macbook. Since then, the group texts that I am in with my family are not appearing properly. For instance, when in the group chat, I can only see what one of my brothers is writing (and clearly some of his texts are in response to what other family members have written, but which I am unable to see). As well, my wife has informed me that my texts are not appearing on her phone the way they normally do (I have not yet seen this, but I imagine they do not look like SMS and or have my email address above the text...can clarify tonight if necessary).
In addition to the above, my emails are delayed about 25 minutes on average. I am not sure if the above and this are related, but I have never experienced this issue. My internet/wifi connection remains the same.
Thanks in advance!
Matt

Try Settings > General > Reset > Reset network settings
You can also delete all your old texts to "start over" so to speak.
Good luck.

Logitech Keyboard Issues with Fast User Switching

I'm running OSX 10.4 on an 800 MHz iMac, and using a Logitech Cordless Navigator keyboard. The keyboard's main feature (for me) is the ability to have the function keys (F1-F12) automatically open applications and folders and such. When I have multiple accounts running though, this feature seems to be tied to whichever one I first logged into. If I switch accounts and try to use one of the keyboard shortcuts nothing happens where I am, but when I switch back to the original account I find that the keyboard has opened the program there. The keyboard types fine in the new account, and I can even change the preferences so the function keys do different things in the different accounts, but the extra functionality seems to be only available for whichever account logs in first.
I realize this may just be a Logitech bug, but any ideas how to fix this? (Also even though I'm the only one using my computer this seems like a mild security issue, if theoretically another user could activate programs on my account without the password.)
800 MHz iMac G4 Mac OS X (10.4.3) 768 MB RAM

Logitech support is frustrating:
Dear tajmahall14,
Thank you for your recent inquiry about your Keyboards.
I understand you are having issues with the settings for the function keys becoming non-functional when fast switching from one user account to another.
Depending on the system configuration, the Fast User Switching may or may not work. Unfortunately this is not an issue I can address. You may need to contact Apple to see if they have a possible solution to your problem.

Issues with end users saving fillable pdf's.

I created a fillable form via Adobe XI Pro. Just some standard radio buttons and text areas. Some users after filling in the form when they save the file it erases everything they filled in. I cannot control the version of adobe the end user has on their system, is there anything I can do. I am not even sure if that is the problem as it seems to only happen 20% of the time the form is sent out. I confirmed with the last user that encountered this problem that their system has Acrobat XI v11.0.06.

The original one I sent is the base document I send out. Attached is the
last set I received where client said they completed but when saved it
erased all the entries.

Text issue with Chinese Windows XP

Hello,
When installing a distribution made with the english version of CVI 2010 on a PC with Windows XP in Chinese I have an issue with some caracters like µA or ° (see below)
What could be the reason of this behavior and could I solve it?.

Hi Bertrand_ENAC,
Have you ever try to modfy the format and language settings in the setting panel on windows xp ?
Best Regards.
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...
Attachments:
language settings.png ‏27 KB

Group text ichat with OS X 10.5.6 and 10.4.11

I work in an office with co-workers who wish to engage in a group text ichat. Half of the office has OS X 10.5 while the other half operates off of 10.4.
Specifically, I want to know if there is a way to keep a group ichat going in the office when some people are offline. Is there a way to keep a constant group chat going even though some people may be offline at the time? Can they simply join when they log back in? We were hoping to just have a constant conversation that everyone can participate in and everyone can see, whenever they get onto ichat.
Thanks!

Hi,
Welcome to the  Discussions
Two main ways.
Set up a Bonjour Chat which will run a group chat as well as 1-1 chats and people can come and go as they please.
If you all have AIM or Apple Names create a Room and again as long as people know the Room name they can come and go as they please.
In iChat 4 the ChatRoom/Group chats are started from the File Menu > Go to Chat Room.
Entering a name yourself creates a Room to which Buddies can be dragged from the Buddy list.
If you have more that one account Logged in you will need to select the correct Account/Screen Name first.
If you are first there it should say Empty Room at the top.
You can choose to Display (Show) Participants from the View Menu.
I only have one other Mac And I ma not sure if this is why the Bonjour Account does not show in the Go to Room options.
The process is slightly different in iChat 3
9:46 PM Wednesday; April 15, 2009

Group Text Issues with Sprint users

Similar Messages

Maybe you are looking for