Group txt no longer works on iphone 4s

I have just got my iPhone 4s, all looking great until I went to use a group txt app.
I run a football team and used the group txt app (37 recipients) on the iPhone 4 all the time, tried to send group txt yesterday and it came up as an imessage and only one person (who has iphone4s) reolied, no one else received it?
I even downloaded two more group txt apps, still no joy!!
Any suggestions??

I have the same issue. My 3Gs worked fine until about 6 months ago and it got progressively worse. Edge works fine but when it comes to 3G sometimes it works and a lot of times it does not work, and there does not seem to be a pattern to it at all. It even sometimes reads full bars on 3G but if you try to access anything it has no internet connectivity. If you try to make a call it just fails.
I have reset my whole phone undated all the software on the phone and iTunes. I used my SIM card with a friends 3GS phone and it worked fine. Called tech help for Rogers and they could not narrow it down but they thought it was a problem with the towers. But based on process of elimination its the phone my guess is the software of the 3G antenna. Unless someone has a solution (and it does not seem like it by reading these forums) there is no other solution other then get a new phone.

Similar Messages

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you hel

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

  • Wifi no longer working on Iphone 6

    wifi no longer working on Iphone 6

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not help, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
    iPhone - Contact Support - Apple Support

  • Bose headset no longer works on iPhone 4

    My Bose headset, which worked flawlessly on 3GS, no longer works for voice control and voice memos on my new iphone 4. They still work fine as headphones but the microphone no longer is operational. The Apple supplied headset works and if I unplug the Bose set the voice dialing and memos work okay.
    But when I use the Bose headset and try to record a voice memo it includes a rhythmic static every half second or so. Voice control is completely non-operational with this headset. I'm thinking something with the noise canceling is screwed up.
    Anyone have any possible work arounds?

    Ya, this is a bit of a Joke.
    I have an $80 pair of skullcandy headphones with Mic that I just recently purchased for my iPhone 3G. When I jumped to the iPhone4 it doesnt work. The apple headset works every time. When I plug in the skull candy, I can hear the person I'm calling but they cant hear me and to add to that, there is this staticy pulsing sound on the line from the headset. If I press and hold the Talk/Music button on my SC headset, the person I'm calling can hear me but they say I sound like I'm in the background. I thought as you did that the mic on the phone was then in use, but when i disconnected the headset, the person I called said it changed and I sounded "Really" far away at that point.
    Apple: So how do I fix this? I refuse to carry around two headsets and the apple headset is less than desireable for quality music listening.

  • Grouping compilations no longer works after adding artwork..!

    Until yesterday I had never bothered with adding artwork to my itunes library as I had a gen 3 iPod that would not show it anyway. I have a new ipod so last night I decided to add artwork, this I did by getting what I could from Gracenote, the rest I have been dragging from images on Amazon and other sites. Ever since doing this the Group Compilations option no longer works, despite having this checkbox ticked in preferences and making sure that the yes box for part of a compilation is ticked for these albums. In addition, every song in a compilation album is displayed individually in the Cover Flow view option.
    Is this a peculiarity of 7.2 or is there a way I can get this to work again? I am sure it is something to do with having added artwork as it was working fine before.
    The help menu in itunes seems to have stopped working too now, which doesn't help...obviously!

    Until yesterday I had never bothered with adding artwork to my itunes library as I had a gen 3 iPod that would not show it anyway. I have a new ipod so last night I decided to add artwork, this I did by getting what I could from Gracenote, the rest I have been dragging from images on Amazon and other sites. Ever since doing this the Group Compilations option no longer works, despite having this checkbox ticked in preferences and making sure that the yes box for part of a compilation is ticked for these albums. In addition, every song in a compilation album is displayed individually in the Cover Flow view option.
    Is this a peculiarity of 7.2 or is there a way I can get this to work again? I am sure it is something to do with having added artwork as it was working fine before.
    The help menu in itunes seems to have stopped working too now, which doesn't help...obviously!

  • Facebook no longer works with iPhone 4s

    For the last two days my Facebook app on my iPhone 4s no longer works.  I click on it and it tries to open but it just goes back to the screen.  Any idea on how to fix this?

    Do you have the current FaceBook app version installed?
    Any change after a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?
    If not, any change after deleting and reinstalling the app?

  • Mail Sounds No Longer Work on iPhone 4.

    The sounds for mail, incoming or outgoing, no longer work on my iPhone 4 (4.3.3).  All it does is vibrate even though that is set to Off.   All the other feature settings are set to ON. I have checked all the sounds and they work, they just don't work with the Mail any more.  This is a MobileMe IMAP account.  I tried re-setting everything without deleting data and that made no difference.  The sounds worked perfectly up until a week or so ago.  Any ideas on how to have them function again?  In addition, when I connect the iPhone to my iMac (Snow Leopard 10.6.7) the phone also vibrates.  This is a new feature as well.  Any chance a setting in iTunes might have caused this, and, if so, how to remedy it.
    Thanks!

    Problem solved.  No further action.

  • M4V no longer working on iPhone

    I work for a software company and do the video tutorials. I always export a .MOV version and export an iPhone version using QuickTime's export features. Before the .M4V versions always worked on iPhone, but they no longer work. Not on iOS 4 or iOS 3. However, .MOV files that were exported with a size suitable for the iPhone do work. Can anybody help me with this?

    From iPhone tech specs:
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Sounds no longer working on iPhone 4

    Hello,
    So a few days ago I dropped my iPhone 4. I'm not 100% sure but I think that is when my sound stopped working. The speakers are working fine, I can hear music and things like that. None of the phone sounds such as clicking when lock/unlocked, keyboard clicks etc are working. When I press the + and - volume buttons the icon does not appear, same as when i mute/unmute it. No sounds, nothing appears. Also, when I receive incoming calls the ringer no longer works.
    I have tried cleaning with toothbrush, restarting, restoring, blowing in the phone, etc.
    Any help or advice would be greatly appreciated.
    I do not have insurance on my phone (I know, I know) but I was in the process of buying a house and moving when they did the switch from mobileprotect to att&t so I apparently missed it and it was too late :/

    I have no doubt that this is a hardware issue, probably caused by the drop as you said. By restarting and restoring without success, you have basically ruled out a software issue. All you can do now is pay $149 for an out-of-warranty replacement, or try to find one elsewhere for cheaper.

  • JBL Radial dock no longer works on iPhone 4 after iOS 5 upgrade.

    JBL Radial dock no longer charges my  iPhone 4 after iOS 5 upgrade however I still Can play music.
    Any help on that ?

    OK a bit of success over the weekend. Not sure if it will help you guys. So i have an IPHONE 3gs and it would not play any music through the JBL but it would ring (through the JBL speaker) and charge while connected.
    I sync'ed through itunes and made sure i had the latest version of both itunes and the IOS on the phone. Then pushed some podcasts and albums down from my computer to the iphone through the computer.
    This must have sone something as now everythign works fine. all radio and music apps now play through the JBL.
    Hope this helps.

  • Charger cable no longer works with iPhone 5s

    Hello:
       My white lightning iPhone charger cable used to work to charge my iPhone when I plugged one end into a powered USB and the other end into the iPhone.
    Now, if I am lucky, I will get a message stating that this device is not supported by Apple and may not charge this iPhone.
    Is there any setting, to turn off this bypass, so that my charger cable  can be used to charge my phone?
    Or what is missing from my charger cable which allowed it to charge fine in an earlier version of IOS that no longer work in 8.1.3?
    Thanks in advance

    Clean the squashed fluff and debris out of the phone's charging port with a wooden tooothpick or similar. Be gentle.

  • Headphones remote no longer works with iphone 4s

    I just purchased an iphone 4s and when i was listening to music the skip/back track functions no longer work, is there any suggestions to make it functional again.
    Double click reduces volume to 50% or brings up Siri where it should skip to next track

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • Bluetooth no longer works between iPhone 5 running iOS8 and my 2012 Buick LaCrosse

    Since I uploaded the new iOS 8 on my iPhone 5 the Bluetooth connection is no longer working correctly in my 2012 Buick LaCrosse.   The phone pairs (illuminating the Bluetooth icon in the car stereo display) however then it doesn't work.  I cannot receive calls or can't make calls.     The iPhone display shows "Calling" and the number shows, but nothing happens. 
    I tried the suggestion from ChrisJ4203 below, however it did not work for me.
    “Go into the phone and remove the vehicle from the Bluetooth list. Turn Bluetooth off, and do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Then go into the vehicle and remove the iPhone from the list of paired devices. Turn the vehicle off and then back on again. Place the vehicle's system into discovery/pairing mode. Go into Settings on the phone and turn Bluetooth on. The devices should see each other.”
    Any other ideas?   My iPhone worked fine from Jan 2012 to now in this same car.

    We have a 2011 Buick Enclave and the Pairing worked.  I did have to hold the phone button, say Bluetooth, Say Delete, Say the specific device to Delete ...The Pair, I think enter the code (which changes each time you Pair) and then Name the New paired Device.  To test it, I typically have to turn the vehicle off, leave the vehicle and walk far enough away to make sure the phone is not paired.  While away, tune the phone totally off.  Turn the phone back on, enter and turn key far enough to have the electrical systems come on, and then push the phone button in the car.  Good Luck.

  • I have a Mac Pro using Lion, with a SSD for system.  Restored drive from backup.  Now logon password doesn't work.  Account password still works.  Changing password in user group preferences no longer works to change logon password.

    I have a Mac Pro using Lion, with SSD for system drive.  Drive stopped booting, but otherwise appeared healthy.  Restored from system backup.  Now drive seems to work properly, BUT my logon password no longer works.  Password OK for account; can access system preferences, and change user password there BUT logon still refuses to accept password.  No luck changing password for that account after adding new administrator account and logging on from that account.  Suggestions?  Thanks.

    If you redirect Accounts to another location (not on the Boot Drive) you need to direct them back there again after a restore.
    SystemPreferences > Accounts/User&Groups > ...
    ... Unlock the lock, then hold down Control as you click on an Account to get access to the Advanced Options pane.

Maybe you are looking for