Group with 1 name & 2 addresses?

Sorry if this has been answered, but I couldn't find an appropriate thread.
Is there a way to creat a group in Address Book that has two (or more) e-mail addresses from one name?
For example, I'd like to continuously send Person X e-mails that go to both of her addresses. Instead of manually inserting both e-mail addresses, I'd like to include them both in a group.
Entourage let me do this, but I can't see how Address Book / Mail does.
Any help?

Welcome to the discussions, jeffreygeoffrey.
A group does not actually contain contacts; contacts are members of a group (or indeed many groups). To do what you want (which sounds suspiciously like harassment - "I'd like to continuously send" - but I hope that's not what you mean) you would need to make two cards for Miss X, one with each of her email addresses, and put them both into the X group.
AK

Similar Messages

  • Wiki - No group with that name hosted on this server?

    I tried to create a wiki for a group of users on my server. Unfortunatly I couldn't get it to work through the external website. Everytime I returns the error "404: No group with that name (team) hosted on this server". But when I went to the internal adres of the server "10.0.3.1" the wiki worked fine, although I selected the FQDN at "Enable the following services for this group on".
    I searched the forums but no solution helpt. I checked the MAC address, restarted teams, restarted webservices, rebooted the server. Because nothing helpt I recreated my opendirectory database. Filled it with all users again but it still doesn't work. However, when I go to server admin and then to "Sites" all my sites are gone, although they do work, I can't edit any of the settings. In Workgroup Manager at "Enable the following services for this group on" I can only select "NONE".
    It looks like Server Admin and Workgroup Manager are out of Sync and Server Admin also lost his previous settings. I tried to import an backup of the webservices, then the new sites appear for a few seconds and then disappear again.
    Any advise?

    It sounds like you have a DNS problem. You have one hostname/IP for the 'world' and another hostname/IP for your internal network. You need to reconcile that before you will get the wiki to work. Start with this in Terminal.app:
    sudo changeip -checkhostname
    Then do:
    sudo hostname

  • "404: No group with that name (wikigroupname) hosted on this server"

    I am running 10.6.8 as our wiki server. After rebooting the server, one of the wiki group seems to be not accessible. When try to access the web page it gives error "404: No group with that name (wikigroupname) hosted on this server", though it still exists in /Library/Collaboration/Groups/wikigroupname
    Do you know how to make it viewable again? I tried to create a new wiki "test" and then rsync /Library/Collaboration/Groups/wikigroupname to /Library/Collaboration/Groups/test, yet still can not see the old wiki group.
    Thank you in advance for you help.

    In all due respect Antonio, I believe that Francesc43 is fighting a flakey system. The 404 No Group is a problem that is confirmed by Apple according to others and very prevalent. At this point the only remediation appears to be a complete server rebuild and to avoid going beyond the "default" configuration for web domains.
    I have personally used only the 'any domain' default config, had the server working fairly well. I then added a FQDN and the server started giving 404s for all groups which previously worked and have data in the wiki. At the same time the simple web sites worked with and without the FQDN as expected. Then removing (not disabling) the default web domain config relieved the wiki 404s. Adding a new default domain config back in (via just hitting the "+" and "Save") recreated the 404's for the previously working wikis with no change to the groups. Removing the system created default domain config it alleviated the 404s.
    Adding a system generated default and a 3rd FQDN re-created the issue and then afterwords, removing all but the FQDN that worked could not alleviate the 404s. Regardless of the permutation of turning things on and off, deleting groups, removing webservices settings, putting them back in, restarting the server.. nothing. 404-DOA
    While the mystery seems to be related to a very fragile relationship with DNS on the server, the solution is again to erase the disk and start over. Wikis in 10.5 thus far are neither a robust nor a stable solution from 10.5 thru 10.5.5 in my experience.

  • Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

    Dear all..
    I am in situation where i have to rejoin my scvmm server to  domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
    the server.
    Does it have any risks involved or its just fine?

    Hi,
    First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
    SCVMM it's not depending (integration) on active directory in such way as Exchange.
    So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
    Best Regards,
    Jesper Vindum, Denmark
    Systems Administrator
    Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

  • Merge Email Address Only Group With Matching Names And Emails Group

    Here's the situation:
    I have a large list of conacts that are only email addresses and are in a group called Emails Only.  I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
    I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group.  Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
    Any help would be much appreciated!

    Hi Navgup,
    Please refer to the script below, to query users in other domain by specifying the parameter "-Server" in the cmdlet "get-aduser", and also note I haven't tested the script below:
    import-module activedirectory
    get-adgroupmember "group"|foreach{
    $email=(get-aduser $_.samaccountname -properties *).EmailAddress#get the user email
    Get-ADUser -filter {EmailAddress -eq $email} -properties * -server DomainB.company.com|select samaccountname, memberof}#filter user name and group with the email in other domain
    To get users across domain, please also refer this blog:
    Adding/removing members from another forest or domain to groups in Active Directory:
    http://blogs.msdn.com/b/adpowershell/archive/2010/01/20/adding-removing-members-from-another-forest-or-domain-to-groups-in-active-directory.aspx?Redirected=true
    I hope this helps.

  • Mail Groups with Multiple Contact Email Addresses

    I cannot find a way to create a Group in Address Book where the contacts have more than one email address. In fact I have not been able to get emailing to groups with Mail to work at all. I always get prompted to select one of my other outgoing SMTP servers... none of them work, iCloud, Gmail, private domain. I don't understand why this is so difficult.
    I have read online that Groups do not support contacts with multiple email addresses... Really? Say it isn't so!

    User A can have one mailbox associated with his ID.  You can create other "User A" mailboxes with different names and e-mail addresses as shared mailboxes and grant User A full mailbox rights and send as right.  User A can
    then connect to each one of them separately.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Merge Emails Only group with matching Names and Emails group

    Here's the situation:
    I have a large list of conacts that are only email addresses and are in a group called Emails Only.  I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
    I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group.  Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
    Any help would be much appreciated!

    Here's the situation:
    I have a large list of conacts that are only email addresses and are in a group called Emails Only.  I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
    I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group.  Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
    Any help would be much appreciated!

  • Limitation on source group with services using ip address range

    Hello,
    I have an interface on CSS which I regard as public and another interface I regard as private. On the private interface is a server farm with private ip addresses. Since the server admin guys insisted the servers need to access internet just for Windows Update, I made a source group to NAT the private addresses to public addresses to allow the servers to access internet.
    I defined services for use by the source group. Since keepalive is not important in this case, I set keepalive none to ,I hope so, save system resources.
    I have server 192.168.1.1-5 (5 servers) and 192.168.1.11-14 (4 servers), so I made a service with ip address 192.168.1.1 range 5 and another service 192.168.1.11 range 4.
    But then I found that the two services cannot be put in the same source group. It is because of the different range in the service definition.
    I can get it work if I define services with single ip address, but then I will have a long configuration with repetative information. And I think this may be using more system resources.
    I can also get it work if I include 192.168.11.15 and define two services both with a range of 5 ip addresses. But 192.168.11.15 is not actually there.
    Why is there such a limitation on source group, or services with ip address range? Is there the same limitation for content rules? Or am I getting it all wrong and should do the configuration in other ways?
    Advices will be welcomed.
    CT Yau
    Hong Kong

    Yes you are correct. There is a limitation while adding services into source groups.
    You can create as many services that share an ip range (eg. a /24 subnet range). But the trouble starts when you add them into source groups. You can not add them into a source group NOR you can add them under different source groups as well.
    You mentioned that you can use single ip adress instead of range for the services...but it is not true as you will be stuck when you add them into source groups.
    I can think of these following options in your case.
    Option 1
    Change the ip range on the servers. Use 2 different IP ranges one for those 5 servers and another for those 4 servers.
    Create 2 services for each range.
    Create 2 groups and add the services.
    service server-out-192.168.1.1-5
    ip address 192.168.1.1 range 5
    active
    service server-out-172.168.1.11-14
    ip address 192.168.1.11 range 4
    active
    group server-out-192.168.1.11-14
    vip address x.x.x.1
    add server-out-192.168.1.1-5
    active
    group server-out-172.168.1.11-14
    vip address x.x.x.2
    add server-out-172.168.1.11-14
    active
    Option 2
    Create a service that includes all the ip addresses starting from 192.168.1.1 through .14 using the range keyword.
    Now you need to create one source group with a VIP. Add the service to the source group.
    If you do not want to cover the unassigned ip addresses just move them up and use consecutive ones.
    service server-out-192.168.1.1-14
    ip address 192.168.1.1 range 14
    active
    group server-out-192.168.1.11-14
    vip address x.x.x.x
    add service server-out-192.168.1.1-14
    active
    thanks

  • How to auto populate numerous pdf files with same name and address?

    I have numerous pdf files where a company's name and address will need to be entered onto each file.  Would there be a way to enter this information once, say on an excel file or something, and then have this information auto populate all the correct fields in each and every pdf file I have to fill out.  I am a complete rookie with Adobe Acrobat.  At any one's convenience please let me know or point me in a direction where I can possibly learn this for myself.  If Adobe offers this type of service please let me know which department to contact.
    Thanks,
    John

    If you were an InDesign user, you could layout the document there, and use the Data Merge feature to bring in the names and addresses from Excel. Then create a PDF of the resulting file which could be split into individual PDFs.
    There might be a way to do it similarly with Microsoft Word and Mail Merge.

  • How do I get rid of this yellow box with my name/address that is stuck at top of my screen?

    I have this annoying yellow box at the top of my screen.  I am guessing my baby girl was typing on the computer and hit some combination because now I have this yellow box on the top of the screen with my name and address in it and I can't move it or make it disappear.  Any ideas?
    Also, how do I defragment my iMac?
    Thanks,
    Rob

    Re the yellow box, have you tried restarting?
    If you click on the box, what application name is displayed for the app menu (that's the first menu to the right of the Apple menu)?
    Re defragmenting your Mac, such is usually not needed with OS X. OS X usually takes care of that itself, on the fly. What causes you to think it may be necessary to defragment the drive?

  • Global Address List for multiple people with same name?

    When writing a new email, I want to add a name from the global address list of my microsoft exchange Contacts group. I select the blue plus button and type in the name. If there is more than one person in my company with the same name, both people will show up. However, Mail is not letting me see the details of either of the two people so I don't know which one is the right one.
    However, if I start from Contacts, Groups, Exchange and type in that person's name, when I select a name, a second screen will show up with the details (email address, title, etc) of the person. That way, I know which one is the correct person who I want to email. Why can't I do this directly from Mail? If I need to send an email to multiple people from the GAL, I don't want to have to search for them via Contacts.
    Thanks!

    I don't know the exact and complete specification of your intended schema...
    anyway, from what I can see in your post, I assume that
    <deed>
        <deed_type>
            <name>Quit Claim</name>
            <value>Sheriff</name>
        </deed_type>
        <deed_type>
            <name>sheriff's deed</name>
            <value>Sheriff</value>
        </deed_type>
        <deed_type>
            <name>Warranty</name>
            <value>W</name>
        </deed_type>
    </deed>would be the "proper" way to go...
    which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value"

  • Importing into a list with user names into People or group

    Hello,
    I am creating a SharePoint 2010 site for a Windows 7 upgrade team.
    We have several external (to SharePoint) lists that need to be available to the SharePoint site.
    List #1 is a list of users, and comes from the company HR system. It has NT login names, email addresses and locality information. (approx. 17500 entries)
    List #2 is a list of applications (approx. 1200) and associated users
    List #3 is a list of workstations (approx. 20,000) and has basic user details
    All three lists will change on a monthly basis as people come and go from the business and we are unable to link directly to each target system.
    I am keen to create a self service portal where the Current Logged in User using equals [me] has their own dashboard page and the lists are shown with their own information and any workstations they have.
    When I import the list from Excel, all columns are single line or number etc, and I don't see a ready way to map to a column type people of group. This means the filter [me] cannot be used.
    Is there any way the current logged in user [me] can filter against information in a list that has been imported ?
    Thanks

    I may have found a solution to this:
    If I use XL to add the domain\ to the username in the Excel sheet prior to import, then use the Current User filter web part, it seems to do the job.
    This is a test on a 100 item list, Ill import the rest and see how efficient it is, and perhaps index the NT Username column ?

  • Funky sync? many new groups with names from Notes field created

    I've got a client using Tiger on a G5 iMac, and syncing both with dot mac to a PowerBook, and using PocketMac to a Blackberry (don't get me started about PocketMac and Blackberries.)
    Anyway, I figure a sync caused this: today she opened Address Book and about 50 groups with names taken from her Notes field were there (things like "christmas card"). Some of these groups have cards in them, some don't. We had to restore from a backup. We use Backup, and I hope it's smart enough to take care of the sync stuff in the truth database when the next sync happens. I had Backup do a Restore of the entire ~Library/Application Support/Address Book folder.
    Anybody seen this before? I'd like to prevent it happening again. Also if there are other files that Backup needs to be told to Restore in case this comes up again, I'd appreciate knowing about that, too.
    Thanks!

    By anychance did you or your wife use any forwarding options under mobile me.

  • Send emails from a csv file (grouping records with the same email addresses)

    Writing a script to send emails from a csv which contains record details and email addresses using the Send-Mailmessage cmdlet.
    That part is no trouble, however, the csv file contain records that can have the same email address.
    Is there a way/method I could send the records with the same email address once instead of sending individual email messages?
    Thanks
    Data in the csv file
    Record number, description, email
    1234, Test 1, [email protected]
    5678, Test 2, [email protected]
    1245, Test 3, [email protected]
    4578, Test 4, [email protected]
    $data = Import-csv c:\records.csv
    ForEach($address in $data)
    Send-mailmessage -To $address.emails -from [email protected] -subject "List of records" -Body $data -SmtpServer 192.168.1.1

    The following code does what you are looking for:
    $data = Import-csv c:\records.csv$mx = "192.168.1.1"
    $subject = "List of records"
    $from = "[email protected]"
    $data| Group-Object email|Select-Object Name, @{n='msg'; e={$_.Group| Select-Object -Property "record number", description|ConvertTo-Csv -notypeinformation|Out-String}}|
    ForEach-Object {Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from}
    I also recommend no forcing everything into one line.  "One-liner" means "one pipeline" not putting all code on one unreadable line.
    Your code should look like this:
    $data|
    Group-Object email|
    Select-Object Name, @{
    n='msg'; e={
    $_.Group| Select-Object -Property "record number", description|
    ConvertTo-Csv -notypeinformation|Out-String
    }|
    ForEach-Object {
    Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from
    Now we can see the code and see that you are still unnecessarily converting back and forth.
    To get the group look at how I did it.
    $body=$_.Group | Format-Table |Out-String
    Isn't that much easier?
    Once you master the pipeline these things will become second nature.  In PowerShell it is not necessary to write lots of code most of the time.
    ¯\_(ツ)_/¯

  • Two groups with the same name in File and LDAP realms

    Hi,
    I configured WLS 6.0 SP1 to use an LDAP caching realm
    as default one. In the LDAP server (Netscape Directory)
    I have a group called Administrators. There is a group
    with the same name in WLS own File Realm. When I click
    on the Groups menu item in the administration console
    I only get the Administrators group from the File Realm
    listed. Is that expected? What will happen if I protect
    a resource ti the Administrators group? Which one will
    prevail - the one from the LDAP or the one from File
    Realm? Or maybe the two will be merged?
    Regards,
    Plamen Petrov
    AstraZeneca
    Sweden

    Hi
    First of all I want to know that where you created your class, In SE24 or in any programm.
    if in SE24, then go to se24 open that class go to methods tab and check if that method name accurs at two places, if not, then
    click on that method and check the code.
    or if in a program.
    then you must have defined like
    class <class name> definition.
    public section
    method <method name>
    endclass.
    class <class name> implementation.
    method <method name>
      code for that method.
    endclass.
    It might be possible you have set the implementation part twice for that particular method, So please check and delete one implementation for that method.
    Thanks
    Lalit Gupta

Maybe you are looking for