Grouping and ungrouping problem

I have a number of text boxes and graphic boxes that overlap each other for a catalog I do. I have them on separate layers so that they are easier to work with and I don't accidentally move something I didn't mean to. The group function is useful to me except that when I ungroup all the elements are on one layer!!! How do I ungroup so that each element goes back to its correct layer?
Thanks

> Let me ask this then; Is there a way when pasting from layers to get all the selected elements to snap to a guide? If I have an element or 5 elements selected, as long as they are on the same layer i can get them to snap to a guide. If I have 5 elements selected across say 3 layers I can no longer get them to snap to a guide.....
I don't understand what you are saying here. Snapping behavior for objects on multiple layers is exactly the same, as far as I can tell, as it is if they were on a single layer. What isn't working?
Peter

Similar Messages

  • Grouping and UnGrouping of JTable Rows?

    Hi,
    Has somebody done Grouping and UnGrouping of JTable Rows as we find in MS-Excel.
    Thanks & regards
    blue

    Hi,
    Have anyone done something like this.
    If u r not clear about the requirement:
    Please see the screenshot uploaded at below url:
    [http://www.geocities.com/coolneela/GroupableTable.JPG]
    As shown the screenshot i want the Group 1 ,2,3 to be expandable and hideable i.e should behave like a Jtree node.....In rest of the column User can enter any input i.e for the columns A,B,C..
    thanks & regards
    Neel

  • Group and Ungroup without moving all data to one layer?

    Good morning!  When I group multiple features (usually for alignment purposes), ungrouping them then tosses all items onto one layer.  This is quite frustrating; anyone know a workaround? 

    My coworkers and I realized this workflow is a hang-over from FreeHand.  FH took issue with moving multiple objects, but did so happily if said objects were grouped.  Ungrouping then released to the original layers.  AI moves multiple objects without complaint!  Thanks again!

  • Grouping and Ungrouping

    hello
    am working wiht photo editor project . i need to implement
    transform tool and multiple images need selecting
    when iam selecting using CTRL key multiple images every time
    i need to apply transform tool and after i want
    if user pressed grouped button all selected images need gruop
    and ungroup functionality
    thank you
    yugandhar

    You could possibly put them in a container object and then
    operate on all children of that container.

  • Static record group and lov problem

    hi all,
    1)I created a form module
    2)created a basic datablock based on empno and ename from emp table.
    3) created a static record group ,where i specified the column name as col1,provided the values as 1 ,2,3,4,5 etc
    4) created an LOV and assigned the above record group to the LOV
    5) then assigned the lov to the emp.empno item in the datablock emp....
    when i run the form .....i get the list of values message on the console (bottom end of the window) ....
    but I am not able to see the LOV when i press the cntrl L or see it from the edit menu command ?
    what must be the problem ?
    ta
    s

    Dear,
    May be you don't set LOV's "Column Mapping Properties". After setting the properties correctly you will be able to display LOV.
    Thanks.

  • User groups and permissions problem

    Hello everyone,
    I've been running Arch Linux for about a month now and I have noticed a few things related to permissions associated with user groups that annoy me. My user is part of the storage, wheel and network groups, amongst others. I can see this when I run the `groups` command. From what I could read on the Wiki, the storage group should allow me to mount/umount drives such as my USB key and my iPod when they are plugged in and access the files from my user account without using sudo. The network group should let me manage the network connection via ifconfig, iwconfig, etc. once again without using sudo.
    However, when I run iwconfig as my normal user, I get incomplete and inaccurate information. I get about 2 lines telling me essentially that I am not associated with any Access Point, which I clearly am. When I run it with sudo, I get the full information, including my Access Point's ESSID. iwconfig does not get the same data when run with and without sudo. Same goes with ifconfig. Also, I can not run dhcpcd or wpa_supplicant at all as a normal user.
    I get a similar problem with the storage group. I can not mount or umount drives without sudo and I can not write to mounted drives that I've mounted with sudo. This is particularly annoying when I try to manage my iPod.
    Does anyone have a clue what could be causing this?
    Thanks a lot

    I have searched Google and the Arch Wiki, have tried a lot of the suggestions from the forums, such as the 'how I beat policykit and hal' forum post.  Nothing seems to let me mount my drives.  I can see them in Nautilus, I click them but they don't mount.  I can do it as root.  It's really frustrating because I can't figure it out.  I haven't filed a bug report because I thought it was a problem that I was having.
    I haven't tried the iwconfig or network yet.
    This is pretty much the only thing holding me back from everything working.

  • Does the tool to Group and Ungroup objects still exist in word 2011 14.3.9 and if so how can one access it

    See my question !!!

    Hi Johnandhanna
    This question relates to Microsoft Office and you've posted it to an Apple community. The best place for all MS Office for Mac questions is at:
    http://answers.microsoft.com/en-us/mac?auth=1
    In regard your question, the answer is yes, it does still exist. You need to select the items first (so you get the 4 arrowed cross cursor) and then right-click on them to access the Grouping submenu.
    Hope this helps.
    Joe.

  • Ungroup a group and keep the scriptlabel for each item of the group

    Hi
    does someone know how to ungroup a group of rectangles with a certain label (example groupA) an give each rectangle a own label (the same text groupA)
    I can find the group and ungroup it but I can't label the rectangles...
    var oPageItems = app.activeDocument.allPageItems;
    for (var j = oPageItems.length-1;  j >= 0; j--) {if (oPageItems[j].label==("groupA")) {oPageItems[j].ungroup();)
    Please help

    Hi,
    before
    oPageItems[j].ungroup();
    go into the loop and set proper label to each item inside group:
    for (var k; k < oPageItems[j].length; k++)
    oPageItems[j][k].label = "groupA";
    assuming your oPageItems[j] is a group indeed.
    hope...

  • TS3276 I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem. Please help!

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

  • AAA, WLC, and AP Groups, Anchor Controller, Problem

    All,
    First, I have a TAC case open on this problem, but they seem to be stumped and I have been unable to get them to mock it up.  Here are the details and the problem(s):
    Have Cisco ACS using backend AD for user authentication
    MSCHAP, 802.1x
    Three wireless controllers running ver 7.0.98.0; one controller is 4404 the other two are on WiSM blade in 6509.
    Many AP Groups and a few mobility achor setups.
    Wifi clients used to test are Intel and have the proper drivers 12.4.4.5 and 13.1.1.1
    First authentication problem is via SSIDs associated with anchor contollers.  Whenever the SSID is set to use 802.1x, the anchor controller sends message to ACS(RADIUS), but ACS never sees the communication.
    Second authentication problem is related to AP Groups.  Whenever a client associates with an AP that is in a specific AP group and that SSID is also associated with that AP group's interface, I get the same result as above - the contoller talks to the ACS, but the ACS never sees the communication.
    Note that all the above works fine as long as I am not using 802.1x.  If I am using PSK, it all works flawlessly.
    One other thing to note is that, in the case of the AP Group problem, if withing the AP group I associate the SSID with the management interface, the 802.1x works perfectly.  The problem with that is that the client get assigned an IP address from the management Vlan... not what I want, instead, I want the client to get it's IP address from the interface associated with the AP Group.
    It is not a routing problem....
    I have gone through two TAC engineers and the problem is still not resolved.  So close, but not succesfull.
    Any interoperability/Security experts out there that can help nail this thing?
    Thanks

    Jeff,
    Sorry for the late reply.... of course your suggestion was right-on the mark and a wireshark trace uncovered the problem.  I had already re-engaged Cisco TAC and between the wireless engineer and one of their security engineers, they were able to point out that the Cisco ACS 5.0 has a bug specific to this particular problem.  They told me to apply patch, apply OS upgrade, then apply ACS 5.1 upgrade to the ACS.  I was able to apply the patch, but never could get the OS upgrade to take.  For the heck of it, I re-checked the problem after applying the patch and YooHoo!  Works as advertised!
    Thanks for showing the interest, it was definetly a pain-point for my customer.

  • Problem with Group and SubGroup

    Hi All,
    I have one problem in sql statement. I got two tables, PARTY and SUBGROUP.
    <<party>>
    party     group     subgroup;
    WG009     xx     zzz
    <<subgroup>>
    party     group     subgroup;
    WG009     xx     yy
    I have to write a query which gives the result that 'zzz' is not in subgroup table where xx=xx from subgroup.group and party.group. I have written the statement like this, but its not working properly becuase its returning all the records from subgroup.
    SELECT P_CODE, SG_CAT, P_CAT, P_SUB_CAT, SG_CODE FROM PARTY, SUB_GROUP WHERE P_CAT=SG_CAT AND SG_CODE != P_SUB_CAT AND P_CODE='WG009';
    P_CODE SG_CAT P_CAT P_SUB_CAT SG_CODE
    WG009 DWD DWD ANIL SHAH GADAGE
    WG009 DWD DWD ANIL SHAH JAIN FAMILY
    WG009 DWD DWD ANIL SHAH DEDHIA
    Is any body have Idea.
    SKM

    select party,group,subgroup from party
    minus
    select party,group,subgroup from subgroup;

  • Mail:  10.9.1 hasn't fixed group email and attachments problems

    Hi all.
    I was under the impression these were fixed by 10.9.1. but not for me.
    Group email: trying to add a group to the BCC line email freezes Mail. I have to do this several times a day. I have several Contacts groups and Mail hangs whichever one I try to mail.
    Attachments: every attempt to send mail with an attachment is rejected. I get the 'try again/choose another server' window after several minutes. Trying again is always successful, immediately. This has only happened since Mavericks and no settings have changed at the server end.
    Any ideas? Thanks,
    Aidan

    10.9.1 is still in beta. Should you have any problems with it, you should post in the Mac Dev section.
    Sorry,
    Clinton

  • HT201365 Downloaded iOS7 on my 4S. Mostly went well, but sometimes screens lock up (especially text, but also Settings). Find I cannot access and send texts sometimes, plus do not receive some texts from others (group messages real problem).

    Downloaded iOS7 on my 4S. Mostly went well, but sometimes screens lock up (especially text, but also Settings). Find I cannot access and send texts sometimes, plus do not receive some texts from others (group messages real problem). Any work around? And related problem: Getting told can not connect to network when trying to sign on with Apple ID to launch Facetime and Messages.

    I've restarted several times. If I restore from backup, unfortunately the backup was done after iOS7 downloaded. Now, am I wrong that "restore as new" will essentially wipe me out? If so, and having backup, you're saying essentially start over and then backup?

  • Grouping and Decimal characters in rtf templates.

    Hi guys and girls,
    I’m really struggling with a problem here regarding the decimal characters for the prices in my output.
    I'm using XML Publisher 5.6.3.
    My goal is to control the grouping and decimal character from my template.
    The numbers in the XML data file can either be 10.000,00 or 10,000.00. The format is handled by the users nls_numeric_characters profile option.
    The output of the template shall be based on the locale and not the data generated by Oracle Reports. For example: Reports to US customers shall show the numbers in the following format 10,000.00. Reports to our European customers shall show the numbers in this format 10.000,00.
    How can I achieve this in my templates? Can it be achieved at all?
    Thank you in advance.
    Kenneth Kristoffersen
    Edited by: Kenneth_ on May 19, 2009 1:30 AM

    Hi,
    Thank you for your reply.
    The problem is that the report is generating the output based on the users profile option nls_numeric_characters.
    I have tried to override the users profile option in the before report trigger without any luck. I can alter selects so the query gets the numbers in the right format but then I would have to go through all queryes and reports which seem a bit wrong? Especially for the standard Oracle reports.
    BR Kenneth

  • WLC 7.4.100.60 and roaming problems on 8500

    Hello,
    After installing an 8500 controller on 7.4.100.60 and migrating 1000 APs do this controller, we have the following problems:
    [1] clients get disconnected and loose sessions (note: client is mobile gun and is heavily mobile). I have the impression there are more coverage holes. This might be due to bug CSCue13108, but says fixed in 7.4.100.60, we wil be upgrading to 7.4.110.0 anyway shortly.
    [2] we have lots of L3 roaming problems between clients, especially when clients roam between old WISM controller and new 8500 controller. They don't roam, they get disconnected and reconnected, resulting in ip address change, resulting in sessions loss. Old controller still runs 7.0.230.0 but compatibility matrix says these two versions are L3 roaming compatible.
    However, the release notes of 8500 mention this: "Cisco 8500 Series Controller cannot be configured  as a guest anchor controller. However, it can be configured as a foreign  controller to tunnel guest traffic to a guest anchor controller in a  DMZ"
    Because Layer 3 roaming is similar to guest traffic tunneling, does this mean that the 8500 can be the initiator of a L3 roam tunnel, but cannot be the endpoint of a L3 roam tunnel ?
    We have done a test that seems to confirm this: client starts on 8500 in state "local", goes to AP on old controller (7.0.230.0), but roam doesn't work. Client gets re-associated with ip address change. Then when moving back to the 8500 controller, the client does roam successfully, keeps its ip address in the 7.0.230.0 vlan and gets status "foreign" on 8500 controller. controllers are in same mobility group and mobility connections are all up.
    In the 7.5 release notes, this limitation is not mentioned anymore. Does it mean it is solved and 8500 can be used as guest anchor controller in 7.5 ??
    regards,
    Geert

    [2] we have lots of L3 roaming problems between clients, especially when clients roam between old WISM controller and new 8500 controller. They don't roam, they get disconnected and reconnected, resulting in ip address change, resulting in sessions loss. Old controller still runs 7.0.230.0 but compatibility matrix says these two versions are L3 roaming compatible.
    Roaming from one AP to another that shares the same controller is totally different with inter-controller roaming, which you have now.  I believe WiSM-1 has 180 ms compared to the 90 ms on a 5508.  And this time difference means alot.
    So when your client goes from one controller to another, they actually have to do a full re-authentication to the new controller.
    I presume both the old and new controller are in the same Mobility Group?
    However, the release notes of 8500 mention this: "Cisco 8500 Series Controller cannot be configured  as a guest anchor controller. However, it can be configured as a foreign  controller to tunnel guest traffic to a guest anchor controller in a  DMZ"
    Pffft!  That'll be the most expensive Guest Anchor Controller if I follow this solution.

Maybe you are looking for