Grouping Brushes and Symbols

Please add the possibility to group brushes and symbols. Thanks.

Plac3en the file in a document when it is placed in the document drag the art into the symbols panel same for the brushes panel and there you will have a choice of what kinfd of brush ou wish to make, you can also drag ity into the watches pamel to make a pattern fill. Y^ou can save the swattchges, bvrushes nd symbols as libraries for use in the future.

Similar Messages

Adding brushes and symbols to Illustrator CS4

I'm fairly new to Illustrator, though a long time Photoshop user, and I want to add some vectors I've downloaded from 123freevectors. (I'm on a Mac)
In Photoshop, I had no problem adding new brushes from other sources by just dropping them in Presets > Brushes folder.
I tried doing the same with Illustrator by dropping downloaded vectors to Presets > Symbols. Although they showed up in the library listing, the symbols were not correct. Ditto by dropping them in Presets > Brushes.
How do I load new brushes and symbols, and how do I know which library to put them in when what I've downloaded is just described as vectors with extension of .ai (some are .eps)
Thanks!

Plac3en the file in a document when it is placed in the document drag the art into the symbols panel same for the brushes panel and there you will have a choice of what kinfd of brush ou wish to make, you can also drag ity into the watches pamel to make a pattern fill. Y^ou can save the swattchges, bvrushes nd symbols as libraries for use in the future.

Table containes GL account and Symbolic account .

Hi All ,
Is there any table or Function module Or Bapi so that we can find out G/L account ( expense account ) for any symbolic account ???
Expense account is maintained against Symbolic account through configuration using path ( Financial Accounting (New ) -> Travel Management ->Travel Expenses ->Transfer Accounting-> Conversion of symbolic account to expense account ) . How can i get this account number if i know symbolic account. Where this data is stored .??
Thanks In advance.
Regards,
Sijin K P

here we go:
Payroll > Payroll: your country > Posting to Financial Accounting > Activities in the HR-System > Employee grouping and symbolic accounts > Define symbolic accounts

Outline of a drawing that is a mix between calligraphic brush and scatter brush

Hello!
Ok so, I made a drawing using a scatter brush and a calligraphic brush, it is all black, what I need now is to get the outline of the drawing as a whole! how do I do that? thank you!

fefy,
When I select two paths, one that has a calligraphic brush applied and one that has a scatter brush applied, and Object>Expand Appearance (remember to select the latter path itself rather than the scattered appearances), I get two groups:
One group contains a closed path with the shape of the calligraphic brush and then a nostroke/nofill version of the original path.
The other group contains individual objects that are (copies of) the object used for the scatter brush, with the same positions and shapes as in the unexpanded brushed path, and then a nostroke/nofill version of the original path.
In other words, the same appearance, only expanded to individual objects
What do you get?

How to fix my converted files which come out unlegible mixed with letters and symbols?

how to fix my converted documents which look unlegible, mixed with numbers and symbols?

Suggest you first validate the code
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2F&charset=%28detect+auto matically%29&doctype=Inline&group=0
The Float drop issue on the News page could also be related to invalid code
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2Fnews.php&charset=%28det ect+automatically%29&doctype=Inline&group=0
Fix lots of similar odd code like
<p span class="BlueType">
which should read
<p><span class="BlueType">\
The code for the sidebar photos reads
<img src="images/photos/2012DOKSpringAssembly/Bishop-Susan-Boat.jpg" align="center" width="190" height="" />
where height="", IE seems to rendering them at a height of 0px (i.e. invisible).

I need to show grouped id and only the max order value for each unique id

select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select #Temp1.id, max(#Temp1.[OrderOfVisit]), #Temp1.VisitNote
from #Temp1
group by #Temp1.id, #Temp1.OrderOfVisit, #Temp1.[VisitNote]
ORDER BY #Temp1.id
drop table #Temp1
---I need to show grouped id and only the max OrderOfVisit for each unique id, and the VisitNote for each OrderOfVisit
----------------need help-------------

Sounds like this
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select id,OrderOfVisit,VisitNote
from
select #Temp1.id, #Temp1.[OrderOfVisit], #Temp1.VisitNote,ROW_NUMBER() OVER (PARTITION BY #Temp1.id ORDER BY #Temp1.[OrderOfVisit] DESC) AS Seq
from #Temp1
)t
WHERE Seq = 1
ORDER BY id
drop table #Temp1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

HELP! Lightroom Crashes Only with Adjustment Brush and only when using HDMI output!

This is very frustrating. I use my Acer N56V laptop to teach Lightroom workshops. I use a 32 inch television as a display. When I have my laptop attached with an HDMI cable and try to use Lightroom's adjustment brush, it crashes. Either the screen and computer just shuts down or I get the Blue Screen of Death. I can do anything else! I can edit in Photoshop, do anything else in Lightroom or even Silver EFX Pro. I can even click on the adjustment brush. But the minute the brush hits the photo (and not before), the computer crashes. If I don't have it attached to the HDMI or if I use a Serial cable, no issues. It's only the adjustment brush and only the HDMI output.
I called Adobe and they said it was because my onboard video card was primary and not the Nvidia. I called Acer and they said it's auto detect. I also tried making the Nvidia card primary and it still happened. Any ideas???

You have switched the overlay mask to always show. Fortunately, it's easy fixed i.e. tap the O key. Shift+O will cycle the overlay through various colours
Other Adjustment Brush and Graduate Filter shortcuts and modifiers are listed them below:
Open Adjustment Brush - K
Open Gradient Tool - M
Show/hide Pin - H
Always Show - Shift + Cmd/Ctrl+H
Show Selected/Never Show - Shift+H
To increase Amount - Right Arrow
To decrease Amount - Left Arrow
To increase/decrease brush size - ] / [
To increase/decrease feather - Shift+] / Shift+[
Set Flow Amount - Number Keys
To commit and/or start new a brush stroke or gradient - Enter / Return
To delete the selected pin - Delete
Holding down - Alt/Option key activates erase mode
Toggle Auto Mask On/Off - A
Pressing O toggles on/off the overlay
Shift+O cylces through alternative colours for overlay
To constrain gradient to vertical/horizontal - hold down Shift plus drag
To invert the gradient - '
To scale from center - Alt/Option plus drag

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
Steve

I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

How do I fix my 3gs after 6.1.3 update? It will no longer send / receive group messages and won't send pic text messages either.

Ever since I updated my 3gs (on ATT) to 6.1.3, it will no longer send or receive group texts, and it won't send picture messages
(though I seem to be able to receive picture texts). I've looked around on the boards, and here's what I've tried so far (to no avail):
1. Tried simply turning off / on
2. Tried hard reset
3. Tried having imessages off
4. Turned group messaging off / on (tried while it was off)
5. Turned off all messaging, turned phone off / on, turned all message settings back on
6. Reset network settings
Help! Argghh!!! I never had this much trouble when my previous phone was jailbroken! Here I am, trying to be good!

Thanks, Nick. Calling ATT is a last resort; it's a software issue, I'm sure, and I've also found other
people having the same issue, but none of the fixes work. I reset all my settings: nothing. I'm not sure what you mean by restrictions.

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

I have an iPod Touch 4th Generation and it's acting weird. It looks to be something like a calibration error but i don't exactly know. It won't let me tap letters and symbols such as ' ; R and D'. Help?

So my iPod Touch forth gen is acting up. When i try to slide the button to unlock the lock screen, it slides back. It takes several tries for me to do that. I'm able to tap the numbers for the code, but when i try to send messages to my friends or write one of my fanfictions, it goes haywire. It'll enter in letters and words that i didn't even tap on. When i try to tap on a couple of things in particular, it ignores it. '; R D and ~' are some of the letters and symbols that I'm having issues with. Can someone please tell me what's going on? I've restarted it dozens of times, re-entered my passcode, deleted data, and even re-downloaded the keyboards a couple of times. Help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Brush and Pencil tool not working in Photoshop CS5 trial

I dowloaded the Photoshop CS5 trial yesterday 2 days ago. Everything worked perfectly yesterday. Unfortunately, today...the brush and pencil tool doesn't work. Anyone have any idea why?

We need a few more details like what doesn't work
with the brush or pencil tools.
Provide a screenshot if you feel that would help illustrate the problem.
MTSTUNER

Can't get brushes and swatches to sync, only settings/workspaces. (Win7 and Win8.1, latest photoshop)

I have Photoshop CC 2014 installed and updated on a Win7 machine and a Win8.1 machine. When I go to edit>preferences>sync settings, everything is checked, but it seems that only my workspace settings get uploaded. It never seems to transfer my swatches or brushes. They are stored in the default location and show up in the brush and swatch menus.

Do they play in iTunes?

Keyboard problem typing random letters and symbols

I'm having a keyboard problem, the g key, t key, and 5 key type random letters and symbols. i just spent $700 a few monoths ago to a genius [at getting my money] for a logic board after spillin somethin on it. didnt spill anyqthing time. shoot. is this goin to be another major expenditure? downloaded os x 9.4, hoping that might somehow cure it. yeah right

Hi Rob,
Welcome to Apple Support Communities.
It sounds like your running into an issue with the keyboard on your MacBook Pro. The article linked below provides suggestions that will resolve most keyboard issues like the one you described.
OS X Mavericks: If keys on your keyboard don’t work
http://support.apple.com/kb/PH13809
If other keys don’t work
You may have accidentally set an option that changes how your keyboard operates.
Choose Apple menu > System Preferences, click Dictation & Speech, then click “Text to Speech.” If “Speak selected text when the key is pressed” is selected, deselect it or click Change Key to select another key.
Choose Apple menu > System Preferences, click Accessibility, then click Keyboard. Make sure Slow Keys is turned off. If Slow Keys is on, you must hold down a key longer than usual before it’s recognized.
Choose Apple menu > System Preferences, click Accessibility, then click Mouse & Trackpad. Make sure Mouse Keys is off. If Mouse Keys is on, pressing keys in the numeric keypad moves the pointer instead of entering numbers.
Choose Apple menu > System Preferences, click Keyboard, then click Input Sources. Select “Show Input menu in menu bar.” Open the Input menu and make sure the correct keyboard layout is selected. To see the keyboard layout, click Keyboard, then choose “Show Keyboard & Character Viewers in menu bar.”
I hope this helps.
-Jason

Grouping Brushes and Symbols

Similar Messages

Maybe you are looking for