Grouping Character Limit?

Hi Forum,
I've gone kind of nuts with the whole "tagging" thing (using Quick Tag, which rules) and I'm saving the tags in the "grouping" category. I know there's a character limit in "comments" because I've exceeded it before: my question is does the "grouping" category have a limit to the number of characters it will accept and what is it?
Thanks!

I'm going a little tag-happy myself!
Have you found anything better than Quick Tag for tagging in the Grouping section? The idea of the program is righteous, but the implementation is a bit ragged- it hasnt been updated in a long while, and the program hides itself after each tag you enter.

Similar Messages

Character Limit to Custom Calculation Script?

Hi. I have a document that has a text form field. I want to run a custom calculation script that basically says if field "Group Number" = xxxxxxx, then field "Group Name" should = ABC Company.
I have a list of almost 575 group numbers and names that I need to put in the script. And I've got the script working just fine but I am guessing there is a character limit to the script field???? It won't let me put my full list in there.
Any suggestions on how to get around this??
Thanks,
Brandy

I think I might have one error but I thought I had corrected it. Let me run this by you. My "if" lines are like this:
if(a == '88096') event.value = 'Stacy's Carpet Steam Cleaning Company';
But the code doesn't seem to like the ' in the Group's name. Is there a way to correct that without getting rid of the ' .... ?????

How can I get around the character limit in the "print pages" option

I have a rather large PDF file and I need to print certain pages (for example, pages 1, 324, 456, 759, 812, 946, 1206, 1562, 1792, etc.). However, when I click on print and try to type in the pages, there is a character limit, and it is much smaller than the number of characters I need to type. Is there a way around this? Thanks.

OK I figured out the answer. Ctrl+J opens up the console (You have to activate javascript). The following script will extract the pages into a new document, and then you can simply print those pages. All you need to do is fill up the "pageArray" array with a list of your pages, separated by commas. It does not support ranges.
// Extracts all pages listed into a new document
var pageArray = [INSERT YOUR LIST OF PAGE NUMBERS HERE, SEPARATED BY COMMAS];
if (pageArray.length > 0) {
var d = app.newDoc();    // this will add a blank page - we need to remove that once we are done
for (var n = 0; n < pageArray.length; n++) {
d.insertPages( {
nPage: d.numPages-1,
cPath: this.path,
nStart: pageArray[n]-1,
nEnd: pageArray[n]-1,
    // remove the first page
    d.deletePages(0);

How can I increase the character limit of my text messages for Droid Maxx 4.4?

How can I increase the character limit of my text messages for Droid Maxx 4.4?

Send as a MMS.

Free hand SQL character limit

Hi All,
Need help on this:
What is the Character limit for Free hand Sql in XIR2 and XIR3.
Thanks in advance,
swapna.

Hi ,
Can you elloborate a little bit more.
what i understood is that
When you use a sql query like select emp_add from XY
And IF emp_add contains more then 1000 chracters then you are not able to see the full data on the report or on a column
Is it the case or are you looking into some other aspect.
Can you ellborate a bit , Do you receive an error ?
Regards
Kultar

Is there a character limit for a field in CrystalReports?

Is there a character limit for a field in CrystalReports?
Hello,
I'm trying to display a long text (+100.000 characters) stored in a MySql database in CrystalReports but CR is not showing the complete text. Is this because there is a length limit for fields in CR?
Thanks,
Eddy G.

This is not a great answer, but you can base your report on a SQL Command, then use something like this for the command(MS SQL):
select
case when length(table.field) > 65535
      then substring(table.field,1,65535)
      else table.field end as field_part1,
case when length(table.field) > 65536+65535
      then substring(table.field,65536, 65535)
      when length(table.field) between 65536 and 65536+65535
      then substring(table.field,65536, length(table.field)-65535)
      else '' end as field_part2
from table...
Then in the report, display both fields where you want the BLOB data.
HTH,
Carl

Is there a character limit for iTunes U course postings when viewing in iOS app?

I have created a course in iTunes U using the web interface, but when I view the course on my iPad it doesn't show the entire post. Is there a character limit in the app or something for what will display?
To make things even stranger, I went back to the course editor in my browser and saved it again (effectively re-posting it) and when I restarted the iTunes U app in iOS the post was cut even shorter! I'm using an iPad 3rd gen with iOS 6.0.1.

No, there is no workaround. You would need to find a downloadable copy of old apps.

JKM DB2 400 column and table name 10 character limit

I am trying to set up CDC on an iSeries. I have successfully loaded data with the LKM SQL to Oracle, and now I want to set up CDC for the table and am trying to use "JKM DB2 400" . I get invalid token errors when I try to start journalizing, and it appears to be the table and column names, used to set up CDC, which are more than the 10 character limit. Tables like SNP_JRN_SUBSCRIBER seem to come from the getJrnInfo function and other table and column names are hard coded. I want to copy the JKM and reduce all of the names to less than 10 characters.
Where else are these names used? How does the interface know which table names to use when set to use only journalized data and how can I change it to use the new shorter names? Is there a better solution?

Thanks to all for assistance. It turns out that the 10 character limit, about which the server people warned me, isn't an issue with my ODBC connection. The invalid token error was being caused by some missing qualifiers in the generated sql which caused appearances of ".tablename" rather than "tablename" and other similar. I was able to modify the knowledge module to eliminate this issue and the CDC worked correctly on my first test.

HT201991 What is the character limit for length for video or song reviews?

What is the character limit for length for video or song review?

One other thing I found... It was still doing the spinning clock and locking up, but it took a while after boot for the problem to crop up.
I pulled the media card and found that there was a media sync folder under Blackberry\System that had some files in there that were pretty big. The artwork file was over 150MB and some other files were largish.
I deleted the entire media sync folder and now it seems to be behaving itself. No more spinning clock and it seems to be slowly returning to normal. (Besides all the messages it deleted during the whole process)
If anyone else runs into this I would say you should clean the folder off the media card along with disabling the sync. Seems the BB still reads that folder and processes it if present.

Cannot group multiple limit items in single local PO (ECS)

We are on SRM 5.0 (SRM SERVER 5.5 SP 9) and are using SRM in the
extended classic scenario.
We use limit carts and want to be able to create a single PO with
multiple limit items. However, it seems that the implementation of note
1020305 as of SP 9 prevents the possibility to group limit items together in a
single PO completely. I tried implementing the BADI 'BBP_GROUP_LOC_PO' but it had no affect.
Can someone please provide some advice on how to group multiple limit items into a single PO?
Thanks,
Nick

Hi Atul,
Thanks for the note - it was useful, although I don't think I can get my issue resolved as it implies we cannot group multiple limits into one PO.
Can you please explain what the sentence "Multiple packages are possible starting from SRM 5.0 with hierarchies."?
What are hierarchies and how do they work? Will they allow us to have multiple limit items on one PO?
Thanks again,
Nick

UserID field increase 12 character limit

We having an issue with the 12 character limit which would like to
increase for the purposes of pushing data from SAP HR to the LDAP using
the Unique user ID.
I can't find any notes on this issue.

Hi there,
if you are refering to the user id in the ABAP store, it is not possible. I have opened an OSS message recently to ask SAP for that. UserId length in the Java stack can be enlarged.
Kind regards,
Richard

Group member limit on subscriptions?

Hello everyone,
We have been using the subscription feature in KM for awhile now, both for subscribing individual users and subscribing UME groups. This has been working well, so now we have a requirement to subscribe a UME group with a larger member list to a folder...
This UME group has ~250 members. When I tried to subscribe the group, I got an error about the selected channel being invalid for this type of group (the channel we use is Email). So I took a bunch of users out of the group (took the group size down to ~15) and the subscription saved successfully.
We currently have a group of 89 people subscribed to a folder (this group has grown over time) and I believe this is working successfully, although now I'm wondering.... I want to go back and check in with some of the folks in this group to ensure they're getting the subscription emails. <b>Does anyone know of a group size limit for email subscription notifications?</b> Has anyone else run into this and perhaps have a workaround or advice?
Thanks in advance for the help! It's always appreciated.
- Fallon

Thank you for the input, Trevor!
We removed most of the users from the UME group, subscribed the UME group to the folder, and then re-populated the group.... That worked fine, and the subscription emails are being sent.
I was happy to hear you have a large group subscribed as well. It's nice to have that verification.
Thanks again!
Fallon

Can we get a character limit for the subject line?

Some of the more annoying posts place the entire story in the subject line.
(e.g. http://forums.ni.com/ni/board/message?board.id=170&thread.id=334536&jump=true)
The problem is that the edit window when replying blows the margins, making it wider than the screen.
I would think that e.g. a 132 character limit would be sufficient for titles. If anything posted from the newsgroup exceeds that, it could be truncated.
LabVIEW Champion . Do more with less code and in less time .

I agree with Christian,
It seems that some people want to describe the entire issue in the title instead of providing a synopsis..

Does Siri have a character limit when composing emails?

Hello,
I have been trying to use Siri to get some emails done while I'm driving. I can start the email okay, I can get the "Subject" just fine, and I can get into the body of the message just fine. However, as I start dictating the body of my email, Siri will interrupt me in the middle of speaking and ask me if I am ready to send it. This will happen when I am mid-sentence---literally.
I'm wondering----is this because I have reached some sort of character limit that I'm not aware of, and once that limit is reached you can't do anything except send it? I say "period" and "comma" as I'm speaking, but there is no long pause to make Siri think I'm done speaking. I am speaking the entire time, and Siri interrupts me mid-sentence and mid-word right in the middle of me speaking.
Any idea what's going on? Thanks!

The limits are the same-hardware and software-and refer to the ability to address the memory.
If you have a 32bit operating system, it's limited by the same 4GB limit (2^32=4,294,967,296).
If you have a 64bit operating system (such as OS X Tiger) running on a 64bit computer, it's theoretically limited to about 17 Billion GB.
So, with Tiger, you're not likely to run into a memory limit anytime soon.
http://www.apple.com/macosx/features/64bit/

Login password character limit?

Is there a limit to the number of characters you can use for a login password in OS X 10.4x? The Mac login screen can display 14 characters, but it seems that you can keep typing after 14 (you just can’t see the additional characters).
Thanks,
Kevin
G4 Mac OS X (10.4.7)

W.J.,
Thanks for the welcome and the help. I created a test account with a 32-character password (all numbers). I could not log in with the first 31 characters, nor could I log in if I added characters beyond the original 32; only the 32-character password worked.
Next I changed that password to a 50-character password. Again, 49 characters would not work, nor would 51; just the 50-character password would get me logged in.
So, it seems the password character limit is at least 50, but quite possibly more ... I just didn't take the time to enter more numbers to verify it. I'm wondering if the real login password character limit is 256, which from what I've been told is the login character limit on a PC.
I also noticed that I could enter more than 31 characters in the password assistant, even though the slider indicates a limit of 31. And the password I entered (again, a series of numbers) improved in quality as I increased the character count past 31 (think in this case the field itself had room for 39 characters).
In short, I haven't really found the limit to a Mac login password character count.
Kevin
G4 Mac OS X (10.4.7)

Grouping Character Limit?

Similar Messages

Maybe you are looking for