Grouping of files in the file system

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
with the help of host command i am uploading any type of files from user specified location to specified directory.
My requirement is like the files should be grouped wile saving to the specified directory. But how the grouping can be done?
Please advice me on the grouping. on what basis grouping of files can be done and how we can access them?
Please advise.
Thanks..

hi Christian,
and basing on what condidtion should files be "grouped"? Care to add an example on what this "grouping" is supposed to do?right now i am storing all the files in specified directory.
For example if i am having 500 files with different file types. How user can be identified which file for what. To over come this problem grouping should be done.(purpose)
So in the form i should provide provision to create the group.
Please give me ideas how grouping can be done on the files?(the grouping can be of any logic).
note: user cannot the create directories of his own. otherwise we can store files in these specified directories.
Please help.
thanks..

Similar Messages

Tab groups disappear after rebooting the operating system

I've customized some tab groups.
Then I close the FireFox (FF) in this way: Button FF in the upper left corner - > Exit. Then I open the FireFox - and I can see all my customized tab groups.
So, the problem is...
When I reboot my computer and then open the FireFox, all my tabs which were in tab groups are shown only in one window! So that I see only one tab group, where there are all tabs, which were in those groups.

Which security software (firewall, anti-virus) do you have?
Some security software has virtualization or sandbox features that may cause problems by protecting and restoring files in the Firefox profile folder.
App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the sessionstore.js file in the Firefox profile folder.
*http://kb.mozillazine.org/Session_Restore
*https://support.mozilla.org/kb/restore-previous-session
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.org/kb/Clear+Recent+History

Cluster File system local to Global

I need to convert a local High available file system to a global file system. The client needs to share data within the cluster and the solution i offered him was this.
Please let me know if there is a better way to do this. The servers are running 2 failover resource NFS resource groups sharing file systems to clients. Currently the filesystems are configured as HAStoragePlus file systems.
Thanks

Tim, thanks much for your reply. I will doing this as a global file system. Currently, the HA file systems are shared out from only one node and I intend to keep it that way. The only difference is i will make the local HA file systems as global.
I was referring the sun cluster concepts guide which mentions
http://docs.sun.com/app/docs/doc/820-2554/cachcgee?l=en&a=view
"A cluster file system to be highly available, the underlying disk storage must be connected to more than one node. Therefore, a local file system (a file system that is stored on a node's local disk) that is made into a cluster file system is not highly available"
I assume i need to remove the file systems from hastp and make them as global? Please let me know if the understanding is correct...
Thanks again.

Diferent password expiration days for different users in the same system.

Hi sdn gurus,
We need to configure different password expiration days for different groups of users in the same system.
We know how to configure the system to define a password expiration time for the complete system (parameter login/password_expiration_time), but we must configure some expiration time to a group of users and another expiration time to another one in the SAME system.
Somebody know a way to do this?
Thanks in advance for your help!!!

Hi Sunny,
Thanks for your reply!!!
We know the parameter is for the complete system ... but we are trying to find out if exist another way to define diferent passwrod expiration days, to diferent group of users (may be with an additional system parameters or UME configuration).
Thanks to all for your help.

How to use FTP_COMMAND to put a file in the target system

Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
   HANDLE                = dhdl
    command              = cmd
   COMPRESS              = 'N'
VERIFY                =
RFC_DESTINATION       =
IMPORTING
FILESIZE              =
FILEDATE              =
FILETIME              =
tables
    data                  = result
EXCEPTIONS
   TCPIP_ERROR           = 1
   COMMAND_ERROR         = 2
   DATA_ERROR            = 3
   OTHERS                = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkat

check this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
                                                MESSAGE-ID zz
                                                LINE-SIZE 255
                                                LINE-COUNT 65.
                        PROGRAM DECLARATION
PROGRAM ID            : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION           : Phoneix Account Reconcilation Program-Feed
                        Balance sheet account balances from GL
                        3 files needed to be enhanced. The files are " Master
              Attribute File" & "Transaction File(GL Balance)". For
              Master Attribute File, data needs to be retrieved from
              T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
              data from all the tables is downloaded into file
              according to the condition specified. For Transaction
              File, data needs to be retrieved from ZGEIST based on
              Ledger(GG), Record Type(0), Fiscal Year, Period(016).
              Then the current period is used to determine which TSLxx
              & KSLxx needs to be used. Also, the conditions are
              specified in specs which have been used accordingly.
              The final data fetched will need to processed as files
              which neednot be downloaded to Presentation/Application
              server. Instead the files are been FTPed to the
              Informatica Server using FTP. The location where the
              files need to be located is ERC\GLOBALSAP.
                     TABLES
TABLES : ADR6.
                     TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
         coa_code(20),         "COA Code
         coa_description(50), "COA Description
         field11 TYPE x,       "Line Feed
         END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
         act_code(20),         "GL Account Number
         act_desc(60),         "GL Account Description
         act_act_flag(1),      "Account marked for deletion indicator
         glact_type(1),        "GL Account type
         fi_line(20),          "Corporate Financial Statement Line
         coa_code(20),         "COA Code
         act_defcode(3),       "Account Defination Code
         field11 TYPE x,       "Line Feed
       END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
         entity_code(12),     "Entity Code
         com_desc(40),        "Company Name
         coa_code(20),        "COA Code
         field11 TYPE x,      "Line Feed
        END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
         attrib_code(5),       "Attribute Code
         attrib_value(20),     "Attribute Value
         attrib_desc(60),      "Attribute Description
         field11 TYPE x,       "Line Feed
        END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
         gl_reccode(2),        "GL Reconciliation Code
         gl_entity(12),        "GL Entity - Company Code
         gl_accnum(20),        "Gl Group Account Number
         site(4),              "Site
         currency_type(6),     "Transaction Currency Code
         year(4) TYPE n,       "Year
         month(2) TYPE n,      "Month
         as_of_date(8),        "Date Account Balance
         tran_cur_amt(21),     "Transaction Currency Amount
         usd_amount(21),       "USD Amount
         racct(20),            "GL Account Number
         zzbewar(20),          "Consolidation Transaction Type
         zzdatsrc(20),         "Data Source
         zzblart(20),          "Document Type
         rassc(20),          "Trading Partner
         field1(20),           "Attribute field1
         field2(20),           "Attribute field2
         field3(20),           "Attribute field3
         field4(20),           "Attribute field4
         field5(20),           "Attribute field5
         field11 TYPE x,       "Line Feed
       END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
        clnt_name(6),          "Client Name
        source_name(12),       "Source Name
        as_of_date(8),         "AS of Date
        time_stamp(6),         "Time Stamp
        time_zone(8),          "Time Zone
        num_of_files(3),       "Number of Files
        num_of_records(9),     "Number of Records
        user_ids(60),          "User ID(s)
        field11 TYPE x,        "Line Feed
       END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          racct    TYPE racct,      "Account Number
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit Indicator
          rpmax    TYPE rpmax,      "Period
          rzzstagr TYPE stagr,      "Statistical key figure
          zzaltkt TYPE altkt,      "Account Number in Group
          zzdatsrc TYPE zdatsrc,    "Data Source code
          zzbewar TYPE rmvct,      "Transaction Type
          zzblart TYPE blart,      "Document Type
          rassc    TYPE rassc,       "Trading Partner
          zzvbund TYPE rassc,      "Trading Partner
          tslvt    TYPE tslvt9,     "Transactional Currency
          kslvt    TYPE kslvt9,     "Group Currency
        END   OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit indicator
          rpmax    TYPE rpmax,      "Period
        END   OF ty_zgeist_error_data.
                     FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
                     CONSTANTS
DATA : c_selected    TYPE c VALUE 'X', "Field for constant value 'X'
       c_y           TYPE c VALUE 'Y', "For Acc marked for deletion
       c_n           TYPE c VALUE 'N', "For Acc not marked for deletion
       c_a           TYPE c VALUE 'A', "For GL Account type Asset
       c_l           TYPE c VALUE 'L', "For GL Account type Liability
       c_q           TYPE c VALUE 'Q', "For GL Account type Equity
       c_r           TYPE c VALUE 'R', "For GL Account type Revenue
       c_e           TYPE c VALUE 'E', "For GL Account type Expense
       c_t           TYPE c VALUE 'T', "For GL Account type
       c_userid(60) TYPE c ,
       c_curtp       TYPE curtp VALUE '10', "Currency type
       c_curtp1      TYPE curtp VALUE '30', "Currency type
       c_rassc(5)    TYPE c VALUE 'RASSC', "Trading Partner
       c_dtsrce(6)   TYPE c VALUE 'DTSRC', "Data Source
       c_sacct(5)    TYPE c VALUE 'SACCT', "GL Account
       c_docty(5)    TYPE c VALUE 'DOCTY', "Document Type
       c_trxtp(5)    TYPE c VALUE 'TRXTP', "Transaction Type
       c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
       c_datsrc(11) TYPE c VALUE 'Data Source',      "Data Source
       c_glacc(10)   TYPE c VALUE 'GL Account',       "GL Account
       c_doctyp(13) TYPE c VALUE 'Document Type',    "Document Type
       c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
                     DATA (Simple Fields)
DATA: w_cnt1         TYPE i, "No Of records in output file COA Code
      w_cnt2         TYPE i, "No Of records in output file Account
      w_cnt3         TYPE i, "No Of records in output file Entity
      w_cnt4         TYPE i, "No Of records in output file attribute
      w_cnt5         TYPE i, "No Of records in output file GL Balance
      w_tot_recs     TYPE i, "TOtal number of records downloaded
      w_date         LIKE sy-datum, "System date
      w_timediff     LIKE sy-uzeit, "Time Difference to GMT
      w_timezone(10) TYPE c,       "Time Difference to GMT
      w_file_count(3) TYPE n,       "File Count
      w_period TYPE poper,          "To hold Period Value
      w_year LIKE t009b-bdatj,      "To hold Fiscal Year Value
      w_outfile       TYPE char64, "FTPed file path
      w_hdl           TYPE i.       "Handle for FTP
                     INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
          saknr      TYPE saknr,
          txt50_skat TYPE txt50_skat,
          xloev      TYPE xloev,
      END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
      it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
      it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
      it_entitycode TYPE STANDARD TABLE OF ty_entitycode
                                        WITH HEADER LINE,
      it_attribcode TYPE STANDARD TABLE OF ty_attribcode
                                        WITH HEADER LINE,
      it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
      it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
      it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
      it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
      it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
      it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
      it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
      it_zgeist_data    TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data1   TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
      wa_it_zgeist_data1 TYPE ty_zgeist_data,
      wa_it_zgeist_data TYPE zgeist,
      it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
      wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-006,
            POSITION POS_LOW.
PARAMETERS :       P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-007,
            POSITION POS_LOW.
PARAMETERS :       P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-008,
            POSITION POS_LOW.
PARAMETERS :       P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-010,
            POSITION POS_LOW.
SELECT-OPTIONS :   S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PWD'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N                                         *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
                     START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
                     END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
    PERFORM write_error_report.
ENDIF.
*&      Form GET_COMPANY_LIST
           Form to get Company List                                 *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
    TABLES
      company_list = it_company_list.
ENDFORM.                    "GET_COMPANY_LIST
*&      Form GET_GL_ACC_DETAIL
      Form to get the GL Account details                            *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
         l_tabix LIKE sy-tabix.
SELECT saknr xloev
    INTO TABLE it_gl_detail
    FROM ska1
    WHERE ktopl = 'G001'
    AND   ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
    l_tabix = sy-tabix.
    SELECT SINGLE txt50
      INTO l_txt50
      FROM skat
      WHERE spras = 'EN'
      AND   ktopl = 'G001'
      AND   saknr = it_gl_detail-saknr.
    it_gl_detail-txt50_skat = l_txt50.
    MODIFY it_gl_detail INDEX l_tabix.
    CLEAR l_txt50.
ENDLOOP.
ENDFORM.                    "GET_GL_ACC_DETAIL
*&      Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code          = text-023.     "GLOBAL.
it_coacode-coa_description   = text-022.     "Global SAP for ERC
it_coacode-field11           = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM.                    "PROCESS_COACODE
*&      Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
    it_gl_detail2[] = it_gl_detail[].
    SORT it_gl_detail2 BY saknr.
    DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
    LOOP AT it_gl_detail2.
      MOVE it_gl_detail2-saknr      TO it_acctcode-act_code.
      MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
      IF it_gl_detail2-xloev     = c_selected.
        it_acctcode-act_act_flag = c_n.
      ELSE.
        it_acctcode-act_act_flag = c_y.
      ENDIF.
Determine GL Account type based on GL account number
      l_saknr = it_gl_detail2-saknr.
      SHIFT l_saknr LEFT DELETING LEADING '0'.
      IF l_saknr CP '1*'.
        it_acctcode-glact_type = c_a.
      ELSEIF l_saknr CP '2*'.
        it_acctcode-glact_type = c_l.
      ELSEIF l_saknr CP '3*'.
        it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '4*'.
        it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '5*'.
        it_acctcode-glact_type = c_r.
      ELSEIF l_saknr CP '6*'.
        it_acctcode-glact_type = c_e.
      ELSEIF l_saknr CP '7*'.
        it_acctcode-glact_type = c_t.
      ENDIF.
      it_acctcode-fi_line      = 'CDR'.
      it_acctcode-coa_code     = 'GLOBAL'.
      it_acctcode-act_defcode = '001'.
      it_acctcode-field11      = '11'.
      APPEND :it_acctcode.
      CLEAR :it_acctcode,it_gl_detail2.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ACCTCODE
*&      Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table        *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
    LOOP AT it_company_list.
      SHIFT it_company_list-company LEFT DELETING LEADING '0'.
      MOVE it_company_list-company TO it_entitycode-entity_code.
      MOVE it_company_list-name1   TO it_entitycode-com_desc.
      it_entitycode-coa_code    = 'GLOBAL'.
      it_entitycode-field11     = '11'.
      APPEND it_entitycode.
      CLEAR : it_company_list,it_entitycode.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ENTITYCODE
*&      Form PROCESS_ATTRIBCODE
    Form to Populate Attribute data to output file internal table   *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
    MOVE c_rassc TO it_attribcode-attrib_code.
    MOVE it_t001-bukrs TO it_attribcode-attrib_value.
    MOVE c_tradptn TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
    MOVE c_dtsrce TO it_attribcode-attrib_code.
    MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
    MOVE c_datsrc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
    MOVE c_sacct TO it_attribcode-attrib_code.
    MOVE it_ska1-saknr TO it_attribcode-attrib_value.
    MOVE c_glacc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
    MOVE c_docty TO it_attribcode-attrib_code.
    MOVE it_t003-blart TO it_attribcode-attrib_value.
    MOVE c_doctyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
    MOVE c_trxtp TO it_attribcode-attrib_code.
    MOVE it_t856-trtyp TO it_attribcode-attrib_value.
    MOVE c_trantyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
ENDFORM.                    "PROCESS_ATTRIBCODE
*&      Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table    *
FORM process_glbal.
DATA : l_ctran_amt(21),
         l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
   it_glbal-gl_reccode = '04'.
     it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
    it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
    it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
    it_glbal-site       = 'ERC'.
    it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
    it_glbal-year = w_year.
    it_glbal-month = w_period.
    it_glbal-as_of_date = w_date.
    l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
    IF l_ctran_amt LT 0.
      TRANSLATE l_ctran_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_ctran_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_ctran_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_ctran_amt.
    ENDIF.
    it_glbal-tran_cur_amt = l_ctran_amt.
    l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
    IF l_cusd_amt LT 0.
      TRANSLATE l_cusd_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_cusd_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_cusd_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_cusd_amt.
    ENDIF.
    it_glbal-usd_amount = l_cusd_amt.
    it_glbal-racct   = wa_it_zgeist_data1-racct.
    it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
    it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
    it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
    it_glbal-rassc = wa_it_zgeist_data1-rassc.
    it_glbal-field11 = '11'.
    APPEND it_glbal.
    CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM.                    "PROCESS_GLBAL
*&      Form PROCESS_GLOBALSAP
   Form to Populate COntrol data to Output file internal table      *
FORM process_globalsap.
DATA :l_total(9),
        l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
    w_timediff = sy-tzone * -1.
    CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
    w_timediff = sy-tzone.
    CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
    CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name    = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date   = w_date.
it_globalsap-time_stamp   = sy-uzeit.
it_globalsap-time_zone    = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM.                  "PROCESS_GLOBALSAP
*&      Form COUNT_RECORDS
Form to count total number of records Downlaoded                   *
FORM count_records.
DESCRIBE TABLE it_coacode    LINES w_cnt1.
DESCRIBE TABLE it_acctcode   LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal      LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM.                    "COUNT_RECORDS
*&      Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
           FROM zgeist
           WHERE rldnr EQ 'GG'
           AND   ryear EQ w_year
           AND   rrcty EQ 0
           AND   rpmax EQ '016'
           AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
           AND   rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
                             zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
    IF wa_it_zgeist_data-zzaltkt EQ space.
      wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
      wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
      wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
      wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
      wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
      wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
      wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
      wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
      wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
      wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
      wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
      wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
      APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
    ELSE.
      it_zgeist_data1-rbukrs   = wa_it_zgeist_data-rbukrs.
      it_zgeist_data1-rldnr    = wa_it_zgeist_data-rldnr.
      it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
      it_zgeist_data1-racct    = wa_it_zgeist_data-racct.
      it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
      it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
      it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
      it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
      it_zgeist_data1-rtcur    = wa_it_zgeist_data-rtcur.
      PERFORM get_tslvt_kslvt_values USING w_period.
      COLLECT it_zgeist_data1.
    ENDIF.
    CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
            it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM.                    " get_zgeist_data
*&      Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
    WHEN '001' OR '01'.
      l_text = text-e01.
    WHEN '002' OR '02'.
      l_text = text-e02.
    WHEN '003' OR '03'.
      l_text = text-e03.
    WHEN '004' OR '04'.
      l_text = text-e04.
    WHEN '005' OR '05'.
      l_text = text-e05.
    WHEN '006' OR '06'.
      l_text = text-e06.
    WHEN '007' OR '07'.
      l_text = text-e07.
    WHEN '008' OR '08'.
      l_text = text-e08.
    WHEN '009' OR '09'.
      l_text = text-e09.
    WHEN '010' OR '10'.
      l_text = text-e10.
    WHEN '011' OR '11'.
      l_text = text-e11.
    WHEN '012' OR '12'.
      l_text = text-e12.
    WHEN '013' OR '13'.
      l_text = text-e13.
    WHEN '014' OR '14'.
      l_text = text-e14.
    WHEN '015' OR '15'.
      l_text = text-e15.
    WHEN '016' OR '16'.
      l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1   sy-vline,
         2   text-h02,
         9   sy-vline,
         10 text-h03,
         19 sy-vline,
         20 text-h04,
         28 sy-vline,
         29 text-h05,
         41 sy-vline,
         42 text-h06,
         49 sy-vline,
         50 text-h07,
         69 sy-vline,
         70 text-h08,
         89 sy-vline,
         90 text-h09,
         109 sy-vline,
         110 text-h10,
         119 sy-vline,
         120 text-h11,
         130 sy-vline,
         131 text-h12,
         144 sy-vline,
         145 text-h13,
         152 sy-vline,
         153 text-h14,
         234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
    FORMAT COLOR 2.
    WRITE:/1   sy-vline,
           4   wa_it_zgeist_error_data-rldnr,
           9   sy-vline,
           13 wa_it_zgeist_error_data-rrcty,
           19 sy-vline,
           22 wa_it_zgeist_error_data-rvers,
           28 sy-vline,
           32 wa_it_zgeist_error_data-ryear,
           41 sy-vline,
           42 wa_it_zgeist_error_data-rbukrs,
           49 sy-vline,
           50 wa_it_zgeist_error_data-robjnr,
           69 sy-vline,
           70 wa_it_zgeist_error_data-cobjnr,
           89 sy-vline,
           90 wa_it_zgeist_error_data-sobjnr,
           109 sy-vline,
           112 wa_it_zgeist_error_data-rtcur,
           119 sy-vline,
           123 wa_it_zgeist_error_data-runit,
           130 sy-vline,
           135 wa_it_zgeist_error_data-drcrk,
           144 sy-vline,
           147 wa_it_zgeist_error_data-rpmax,
           152 sy-vline,
           153 l_text,
           234 sy-vline.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM.                    " write_error_report
*&      Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
                 <f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
        l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
        l_tslvt TYPE tslvt9,
        l_kslvt TYPE kslvt9,
        l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
      CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
      CONCATENATE   l_kslvt_val l_period+1(2) INTO l_kslvt_val.
    ASSIGN (l_tslvt_val) TO <f1>.
    l_tslvt = <f1>.
    it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
    ASSIGN (l_kslvt_val) TO <f2>.
    l_kslvt = <f2>.
    it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
    l_period = l_period - 1.
    clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
    l_tslvt_val = 'wa_it_zgeist_data-tsl'.
    l_kslvt_val = 'wa_it_zgeist_data-ksl'.
    if l_period = 0.
      exit.
    endif.
ENDDO.
ENDFORM.                    "get_tslvt_kslvt_values
*&      Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1        text
<-- p2        text
FORM process_ftp_file .
DATA: l_slen     TYPE i,
        l_error,
        l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
             c_key TYPE i              VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = l_pwd
      host            = p_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      destination = c_dest
    EXCEPTIONS
      OTHERS      = 1.
ENDFORM.                    " process_ftp_file
*&      Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
*&      Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
         l_day(2)   TYPE c,
         l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day   = sy-datum+6(2).
CASE l_month.
    WHEN '01'.
      IF l_day <= '15'.
        w_period = '12'.
        w_year = l_year - 1.
      ELSE.
        w_period = '1'.
        w_year = l_year.
      ENDIF.
    WHEN '02'.
      IF l_day <= '15'.
        w_period = '1'.
        w_year = l_year.
      ELSE.
        w_period = '2'.
        w_year = l_year.
      ENDIF.
    WHEN '03'.
      IF l_day <= '15'.
        w_period = '2'.
        w_year = l_year.
      ELSE.
        w_period = '3'.
        w_year = l_year.
      ENDIF.
    WHEN '04'.
      IF l_day <= '15'.
        w_period = '3'.
        w_year = l_year.
      ELSE.
        w_period = '4'.
        w_year = l_year.
      ENDIF.
    WHEN '05'.
      IF l_day <= '15'.
        w_period = '4'.
        w_year = l_year.
      ELSE.
        w_period = '5'.
        w_year = l_year.
      ENDIF.
    WHEN '06'.
      IF l_day <= '15'.
        w_period = '5'.
        w_year = l_year.
      ELSE.
        w_period = '6'.
        w_year = l_year.
      ENDIF.
    WHEN '07'.
      IF l_day <= '15'.
        w_period = '6'.
        w_year = l_year.
      ELSE.
        w_period = '7'.
        w_year = l_year.
      ENDIF.
    WHEN '08'.
      IF l_day <= '15'.
        w_period = '7'.
        w_year = l_year.
      ELSE.
        w_period = '8'.
        w_year = l_year.
      ENDIF.
    WHEN '09'.
      IF l_day <= '15'.
        w_period = '8'.
        w_year = l_year.
      ELSE.
        w_period = '9'.
        w_year = l_year.
      ENDIF.
    WHEN '10'.
      IF l_day <= '15'.
        w_period = '9'.
        w_year = l_year.
      ELSE.
        w_period = '10'.
        w_year = l_year.
      ENDIF.
    WHEN '11'.
      IF l_day <= '15'.
        w_period = '10'.
        w_year = l_year.
      ELSE.
        w_period = '11'.
        w_year = l_year.
      ENDIF.
    WHEN '12'.
      IF l_day <= '15'.
        w_period = '11'.
        w_year = l_year.
      ELSE.
        w_period = '12'.
        w_year = l_year.
      ENDIF.
ENDCASE.
ENDFORM.                    " get_period_year

How can I move back the rman convert file from file system to ASM?

I have no idea on pluging-in the data files which were unloaded as follows:
SQL> alter tablespace P_CDDH_DSPGD_V1_2011 read only;
SQL> alter tablespace P_IDX_CDDH_DSPGD_V1_2011 read only;
SQL> exec dbms_tts.transport_set_check('P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011',true);
SQL> select * from transport_set_violations;
UNIX> expdp tossadm@pmscdhf1 dumpfile=ttsfy1.dmp directory=trans_dir transport_tablespaces = P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011
RMAN> convert tablespace P_CDDH_DSPGD_V1_2011, P_IDX_CDDH_DSPGD_V1_2011 format = '/appl/oem/backup/temp/%I_%s_%t_extbspace.dbf';
Starting conversion at source at 03-OCT-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=116 instance=pmscdhf11 device type=DISK
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00079 name=+PMSCDHF1/p_cddh_dspgd_v1_2011_01.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:02:15
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00080 name=+PMSCDHF1/p_idx_cddh_dspgd_v1_2011_02.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:01:45
Finished conversion at source at 03-OCT-13
Starting Control File Autobackup at 03-OCT-13
piece handle=/dbms/oracle/r1110/db_01/dbs/c-3536350174-20131003-02 comment=NONE
Finished Control File Autobackup at 03-OCT-13
SQL> drop tablespace P_CDDH_DSPGD_V1_2011 including contents;
SQL> drop tablespace P_IDX_CDDH_DSPGD_V1_2011 including contents;
Afterward, how can I relocate the backup files "/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf", "/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf" back to the ASM group +PMSCDHF1 ???

The 11.1 documentation only says "Enables you to copy files between ASM disk groups on local instances to and from remote instances" and "You can also use this command to copy files from ASM disk groups to the operating system."
http://docs.oracle.com/cd/B28359_01/server.111/b31107/asm_util.htm#CHDJEIEA
The 11.2 documentation says "Copy files from a disk group to the operating system Copy files from a disk group to a disk group Copy files from the operating system to a disk group"
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asm_util003.htm#CHDJEIEA
I've never tried 11.1
Hemant K Chitale

File system task error ; Access to the path " " is denied

HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamen

How to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How do I identify the latest file modifications, application install, and registry key modification for Security Forensics.... using GP Audit for registry/file system

Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!

Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Difference between ASM Disk Group, ADVM Volume and ACFS File system

Q1. What is the difference between an ASM Disk Group and an ADVM Volume ?
To my mind, an ASM Disk Group is effectively a logical volume for Database files ( including FRA files ).
11gR2 seems to have introduced the concepts of ADVM volumes and ACFS File Systems.
An 11gR2 ASM Disk Group can contain :
ASM Disks
ADVM volumes
ACFS file systems
Q2. ADVM volumes appear to be dynamic volumes.
However is this therefore not effectively layering a logical volume ( the ADVM volume ) beneath an ASM Disk Group ( conceptually a logical volume as well ) ?
Worse still if you have left ASM Disk Group Redundancy to the hardware RAID / SAN level ( as Oracle recommend ), you could effectively have 3 layers of logical disk ? ( ASM on top of ADVM on top of RAID/SAN ) ?
Q3. if it is 2 layers of logical disk ( i.e. ASM on top of ADVM ), what makes this better than 2 layers using a 3rd party volume manager ( eg ASM on top of 3rd party LVM ) - something Oracle encourages against ?
Q4. ACFS File systems, seem to be clustered file systems for non database files including ORACLE_HOMEs, application exe's etc ( but NOT GRID_HOME, OS root, OCR's or Voting disks )
Can you create / modify ACFS file systems using ASM.
The oracle toplogy diagram for ASM in the 11gR2 ASM Admin guide, shows ACFS as part of ASM. I am not sure from this if ACFS is part of ASM or ASM sits on top of ACFS ?
Q5. Connected to Q4. there seems to be a number of different ways, ACFS file systems can be created ? Which of the below are valid methods ?
through ASM ?
through native OS file system creation ?
through OEM ?
through acfsutil ?
my head is exploding
Any help and clarification greatly appreciated
Jim

Q1 - ADVM volume is a type of special file created in the ASM DG. Once created, it creates a block device on the OS itself that can be used just like any other block device. http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmfilesystem.htm#OSTMG30000
Q2 - the asm disk group is a disk group, not really a logical volume. It combines attributes of both when used for database purposes, as the database and certain other applications know how to talk "ASM" protocol. However, you won't find any general purpose applications that can do so. In addition, some customers prefer to deal directly with file systems and volume devices, which ADVM is made to do. In your way of thinking, you could have 3 layers of logical disk, but each of them provides different attributes and characteristics. This is not a bad thing though, as each has a slightly different focus - os file system\device, database specific, and storage centric.
Q3 - ADVM is specifically developed to extend the characteristics of ASM for use by general OS applications. It understands the database performance characteristics and is tuned to work well in that situation. Because it is developed in house, it takes advantage of the ASM design model. Additionally, rather than having to contact multiple vendors for support, your support is limited to calling Oracle, a one-stop shop.
Q4 - You can create and modify ACFS file systems using command line tools and ASMCA. Creating and modifying logical volumes happens through SQL(ASM), asmcmd, and ASMCA. EM can also be used for both items. ACFS sits on top of ADVM, which is a file in an ASM disk group. ACFS is aware of the characteristics of ASM\ADVM volumes, and tunes it's IO to make best use of those characteristics.
Q5 - several ways:
1) Connect to ASM with SQL, use 'alter diskgroup add volume' as Mihael points out. This creates an ADVM volume. Then, format the volume using 'mkfs' (*nix) or acfsformat (windows).
2) Use ASMCA - A gui to create a volume and format a file system. Probably the easiest if your head is exploding.
3) Use 'asmcmd' to create a volume, and 'mkfs' to format the ACFS file system.
Here is information on ASMCA, with examples:
http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmca_acfs.htm#OSTMG94348
Information on command line tools, with examples:
Basic Steps to Manage Oracle ACFS Systems

Maown - file system monitor for shared group directories

Maown Info Page
I needed a way to manage ownership and permissions of files in a shared directory. ACLs and "chmod g+s" alone were not enough so I wrote maown.
Maown is a file system monitor written in C. It uses inotify to recursively watch a directory tree for file creation and attribute modification. It automatically chowns files to user:group and adjusts group permissions to match user permissions.
The package includes a daemon with a simple configuration file. Each line in the configuration file specifies a user, a group and a list of directories to monitor:
<user> <group> <directory> [<directory>...]
Last edited by Xyne (2012-05-21 02:35:24)

Maown has been replaced with Autochown.

How to add disk to disk group File System in oracle windows

Hi all
Please any body can help ... I need to know how can I add disk to disk group
I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.
Please help

I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.If ASM is not enabled that mean, Database is running on normal file system?
Hi thanks for you help.,,, But my system admnistrator already did thies steps,... I think my question was not clear enough
I mean after I add the disk group from O.S side what shall I do from Oracle Side? Since From windows explorer I can see the new drive.If the volumes are ready, you can use ASMCA to configure diskgroups.

After running permissions repair i get the folling msg. Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

after running permission repair i get the following msg. anyone know how to fix this?
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner
a little more info
Before the user had read & write. A member of the group had read.
After, only the user had read & write.

How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

Crystal Reports XI String [255] limit with the File System Data driver...

I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?

Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Grouping of files in the file system

Similar Messages

Maybe you are looking for