Grouping of objects

Hello,
Is there a way of grouping text and a graphic imported from another application? I want to move add text into the middle of a page without altering the format of the rest of the text.
Thanks,
Ben.

Ben,
I'm not quite sure what you are really asking. A text box and a graphic object can be grouped.
If you just want to have a graphic on one side of the page with some of the adjacent text narrower than the main column of text, setting the graphic to cause Wrap may do what you want. You can also separate the text in question from the other text with a Layout break before and after. This allows you to set wider margins for the affected text, as well as the white space before and after it.

Similar Messages

Win 2K8 R2 - Group Policy Management - Failed to Open Group Policy Object. You may not have appropriate rights. The network path was not found.

New to Windows Server 2008 R2 Administration.
I setup this Windows 2008 R2 Server on a Dell 2950 Poweredge server and have been migrating users off of an old NT style domain running on Samba 3.6 on CentOS.
I have the domain setup (nicholas.sacredheartsaratoga.org), added users, and have moved users / computers over to the new domain and working.
When attempting to setup Group Policy Objects, I continually get the "Failed to Open Group Policy Object" Error. This is driving me nuts and seems to be a 49 error.. which I have done a ton of research on but none of the suggested fixes seem
to be working.
I've been working at this for a couple of weeks and really need this fixed to be able to set GPO's correctly.
Here is my IPCONFIG /ALL
C:\Users\Administrator.NICHOLAS.000>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NICHOLAS
Primary Dns Suffix . . . . . . . : sacredheartsaratoga.org
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : nicholas.sacredheartsaratoga.org
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1D-09-27-F1-63
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::542:43f2:2aaf:d903%13(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.20.21(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.20.3
DHCPv6 IAID . . . . . . . . . . . : 301997321
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-7D-DC-B6-00-1D-09-27-F1-61
DNS Servers . . . . . . . . . . . : 10.10.20.21
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{41653A38-9372-4740-BB03-41950A9C9BC0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Will post the entire contents of my gpreport as soon as my account is verified... but this is the jist of the error being reported:
Component Status<v:group alt="Error" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:oval class="vmlimage" fillcolor="red" strokecolor="red" style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="3px" style="" to="75,75"></v:line><v:line class="vmlimage" from="75,25" strokecolor="white" strokeweight="3px" style="" to="25,75"></v:line></v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Failed
2/17/2014 2:50:06 PM
Group Policy Infrastructure failed due to the error listed below.
Logon failure: unknown user name or bad password.
Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/17/2014 2:50:05 PM and 2/17/2014 2:50:06 PM.
Registry
(N/A)
1/4/2014 1:45:29 PM
Security
(N/A)
1/4/2014 1:45:35 PM
User Configuration Summary

How to apply Software Restriction policy for specific user in local group policy object ?

I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject API

I achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a way to show/hide a group of objects that will work in html5?

I consider myself to have a fairly decent understanding of captivate and its functions but this recent issue has stumped me.
I have a button with javascript attached to it that runs a typical if loop: (pseudo code to follow)
if(variable = 1){
show "group" and variable = 0;
} else{
hide "group" and variable = 1;
Now normally, I would do this with single images, etc, and it would work fine. You click the button (the image being unticked where it says "visible in output") and the image shows itself, then you click the button, and it hides. Very standard stuff.
My issue, is that captivate seems to let you name a group you make....but they have not given you any control of that group.
Problem:
I want a way to show and hide a group of objects by only clicking one button (when published to html5).
I want to only have to reference the group and dont want to need to write a separate line of code for every single component that makes up that group (assuming the solution has to be coded).
Is it even possible to control groups like this within captivate?
Thanks!

There is an adobe video that I think shows how to do exactly what you are asking.
This is the video link:
Lightbox-style Menu in Adobe Captivate 6 - YouTube
At about 10min 50sec, it goes over creating a group from a number of single elements.
At about 12min 30sec, it shows creating an action that turns the whole group on and another to turn the group off.
When I did this myself, I used just one action that toggled the group on or off, but they show it as two actions. The idea is the same.
I hope that helps. Apologies if I mis-understood the issue.

Is it possible to group 2 objects that are located on 2 different pages in InDesign CS4 JS

Is it possible to group 2 objects that are located on 2 different pages. Would it be something like that:
        var myArray = new Array;
        //Add the items to the array.
        myArray.push(myLine1);
        myArray.push(myLine2);
        //Group the items.
        var myPages = app.activeDocument.pages;
        myGroup = myPage.groups.add(myArray);
Thank you very much for your help.
Yulia

You can group objects from distinct pages only if they belong to the same spread.
For instance, if you have a rectangle on page 2 and a rectangle on page 3 in a "facing pages" configuration, this should work:
var doc = app.activeDocument;
var r2 = doc.pages[1].rectangles[0]; // rectangle on page 2
var r3 = doc.pages[2].rectangles[0]; // rectangle on page 3
// it's better here to handle the parent spread:
var g = doc.spreads[1].groups.add([r2,r3]);
// but this may also work:
// var g = doc.pages[1].groups.add([r2,r3]);
// var g = doc.pages[2].groups.add([r2,r3]);
@+
Marc

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Group Policy Object "The Network Path Was Not Found"

I should also mention even when I go to click on the currently created policies I get the same error as well, but I seem to be able to at least get into their settings if I wanted too.

Here is the my background of my network.Try to retire a Windows Server 2003 Domain Controller (DC) and upgrading to a Windows Server 2012 R2 domain controller. Currently both server are running as Domain Controllers on the same subnet.An issue I found today was when I went to go create a new group policy object I got an error stating "The Network Path was Not Found." This happens on both the 2003 and 2012 server, so it not just related to one machine. I have done some reading on this and it seems that some people who have a similar error have an issue browsing to their SYSVOL folder for the domain. However I have no issue browsing to that.I have also looked through the even viewer and there doesn't seem to be specific errors related to this. It seems to me like it may be some type of DNS issue, but I am looking for some insight into...
This topic first appeared in the Spiceworks Community

Grouping Anchored Objects

I have an anchored graphic image (using Object, Anchored Object, Insert) and need to add a text box under the graphic and a rectangle frame with a stroke on top of the image to highlight a portion of the image.
What I would love to do is anchor the graphic image and then group the text box and graphic rectangle to the anchored graphic and have all move together. NO LUCK, I guess you cannot select and group multiple objects if one of them is an anchored object.
The work arounds are
1) Anchor EACH of the three objects which works fine but takes a long time.
2) Group the objects and paste them "inline"
3) Group the objects and manually move them when your text moves.
Is there any way to group, attach or link objects to an anchored object so all of them move with the anchored object?
Have InDesign 3 and 2 (same results)

Right clicking on the anchored graphic and using the "Paste Into" option to paste the three grouped objects worked wonderfully. Thank you so much.

[Forum FAQ] The Value drop down list is grayed out when you perform search for Group Policy Objects in GPMC

Symptom
On Windows Server 2012 or Windows Server 2012 R2, when you use the Search for Group Policy Objects feature in GPMC, the “Value” field is not populated when you choose “User Configuration” as the Search Item. (See Figure 1.)
<Figure 1>
Cause
The happens because the Data of the (Default) value of the following Registry Key is not correct.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
By default the Data is (value not set). (see Figure 2)
<Figure 2>
Resolution
The registry keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions] are the Group Policy Preference Client Side Extensions. The CSE name of the GUID {4D2F9B6F-1E52-4711-A382-6A8B1A003DE6} is
RemoteApp and Desktop Connections. Please follow the steps below to resolve the issue.
1. Locate the registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
2. Take the ownership of this key: Right click on the registry key and choose Permissions option and click the Advanced button on the dialogue window. Then on the Advanced Security Settings dialogue window, click Change button to take the ownership
of the key for the current logon account and make the current logon account Full Control permission with the registry key. (See Figure 3.)
<Figure 3>
3. Change the data of (Default) value from "(value not set)" to
"RemoteApp and Desktop Connection Component". (See Figure 4)
<Figure 4>
4. Once the steps above are completed, the Value drop down list will be populated again when you perform Search in GPMC. (See Figure 5)
<figure 5>
This article has been created as a TechNet Wiki
here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

thanks for the tip - but you should create this as a wiki article as it will be easier to reference in the future
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Where we check the authorization group & authorization object?

Hi all,
i have a std program & tcode like fb03 . now i want to know the authorization group & authorization object. so where we will check..?
help me.
thanks.
Vipin

Hi,
Use transaction SU21 & SU22 for Auth Objects & Class

Cursor not understanding to jump below "pasted in" group of objects...

Hi,
So I have one large text box on the page and am pasting in the content bits at a time. Now, I have pasted in a group of objects. I am ready to continue pasting in more copy below the group, but the cursor does not understand to jump down below the last items pasted in - e.g. the group.
In order to position the copy, I need to hit return / enter on the keyboard quite a few times for it to be positioned below the group. This is incorrect and will mess up the flow. I want everything to flow as I add more / subtract content.
How do I get the cursor to "know" to keep moving forward and to go around the group and blink on the line directly below the grouping of objects?
Thank you.

Aha, I suppose this is where the text wrap comes in handy to solve the problem. (I started thinking in Quark terms with its 'runaround' feature.)

Finding centre of group of objects

Hello, sorry to bother you. I've got 6 objects grouped. Illustrator draws a
box right the way around them all. I would like to make a circle whose
centre is the exact centre of this box.
How to find the centre of a group of objects?
I have managed to do this by dividing the height and width of the box and
adding the offset etc., but this seems a long way round. Smart guides isn't
helping.
Any simple way of doing this?
Thank you,
Ariel
Illy CS2 XPSP3

I'll tell you what's going on here. I use InDesign much more than Illy.
InDesign seems to do one very simple thing that Illy doesn't: it allows you
to snap to the centrepoint of a group. In Illy that centrepoint doesn't even
get a GUI representation it seems. So my instinct to do this was the ID way:
snap the ruler to the centre point, draw a circle anywhere and type in 0,0
as the coordinates for the circle's centre point. Basically as fast as
aligning (which in InDesign is slower than Illy because you have to lock one
of the objects). But of course this is impossible
When that failed, I tried to snap two guides, and again Illy lets you down
where ID succeeds. (In InDesign guides snap to all the control points of an
object's bounding box, but not, it seems, in Illy.)
I guess at this stage I lost hope that Illy actually knows where the centre
of a group is, and so I headed off to the forum lol.
However, both suggestions are sensible. Thank you.
FEATURE REQ.: Add a snappable GUI representation of the centre of groups,
like in InDesign. Also, make all control points snappable to, like in ID.

Difference between domain controllers and group policy objects in GPMC

Hello,
Am in confusion, someone can tel me the difference between
1.Domain controllers>default domain controller policy and
2.Group policy object>default domain controller policy
In Group policy management console and also i would like know where to define these categories. I normally use second option.
I have attached screenshot for your information.
regards,
Dharanesh,

This first/upper item is a link to the GPO, the second/lower item is the actual GPO.
(notice the link, has a shortcut arrow showing)
by default, when you double-click on a link, a message will display which says "you have clicked on a link....." and the messagbox offers a checkbox for "do not display this message again..."
Effectively they are equivalent to a shortcut-to-a-file vs. the actual file.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Object Group Vs Object Libraries

Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
rgds
s

Hi,
WIP wrote:
Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?Depends on the requirement. The objects in the Object group are limited to the current form module. However, Object libraries can be used across the forms. Of course, you can subclass this object group in other modules.
>
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?Its like a template. You define set of properties (say width, height and font for a text item), and then subclass the object to all the object you create in your form. So, they all will look similar. Also, once after creating the object group, you can add the object group to the object library. This can be very useful.
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
So, here we use Object Library
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
You cannot reference the individual objects in the object groups.
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?You can add all the Blocks, canvaces, etc to the Object grou, add the object group to the object library. Then, if you just copy/subclass the object group from the Object library, all the blocks, items, canvaces would be created automatically in the target form.
>
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
Only the Parent objects can be included in the Object Group (Child objects cannot). However, in the Object Library, you can add the parent as well as child objects. Here, for ex, parent is a data block and child are the items inside the data block
-Arun
>
rgds
s

Group policy error: Failed to open group policy object on this computer.

Hi all,
I received this message when i tried to look at the local group policy setting on one of my machines (Windows XP SP3), which is joined in my domain.
"Failed to open group policy object on this computer. You may not have appropriate rights.
Details:
Unspecified error."
note that I am local admin.
It's all started when I was troublshooting WSUS connectivity and i looked at the WinsdowsUpdate.log, the WSUS server was <Null> & WSUS status server <Null>, I tried to force the domain GP by using GPupdate /force, it went fine and asked to
log off, but nothing changed in the WindowsUpdate.log still <Null>. Then i tried to look at the local policy setting.
I searched the internet nothing related to my case.
Thanks in advance for advising.
Mohammed Adel

I guess reinstall windows is the solution, I also found one log "event id 1096", related to "registry.pol" it was corrupted.
Regards,
Mohammed Adel

How to group some objects and duplicate it and then enlarge the same group using javascript ??

Hi everyone,
I need to write a javascript which will group some object on running the script and then duplcate the same group.After duplicating it will enlarge the same group upto some extend.The object will be generally inside the textframes.We have to group them and then make a duplcate of the group on the same page.Please tell me the javascript code to do the same.
Thanks and regards,
Sanat

Thanks a lot jongware..now its selecting the objects correctly but i m struck with adding the selected objects to the group and duplicating the same group. I tried the follwing code but it didnot work. main(); function main(){ if (app.documents.length != 0){ if (app.selection.length > 0){ var myObjectList = new Array; var myObjectList = new Array; for (i=0; i<app.selection.length; i++) myObjectList.push (app.selection[i]); alert ("length of myObjectList is "+myObjectList.length); var myGroup =app.documents.groups.add(myObjectList); var myGroup1=myGroup.duplicate(myObjectList1,myObjectList1); } } } I know i m asking silly questions but i m a begginer to this scripting and want to learn more.Please guide me with the proper code to do so. Thanks, Sanat

Grouping of objects

Similar Messages

Maybe you are looking for