Groups - Automatic provision

Hello All .
IDM v 9 .
I want to create automatic process when a users assigned to group automatically he will be provisioned with some data .
I have created the group and assigned the provisioning process to it , but when i assign a user to that group ,
what happens is : the provisioning does not happen, in the user it shows provisioning when I press the edit , i see that it awaits my input data for provisioning.
it did not get the default values it should have from the group setup .
any ideas? help ?
thanks a lot
Sahar

Sounds like you have attached a provisioning policy to a resource object and the AP is not firing upon group membership.
The most common reason behind this is that you don't have "auto save" and "auto launch" set on the RO. More info: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363/resmgt.htm#BCEEIFGD
Hoep this helps
/Martin

Similar Messages

  • Automatic Provisioning of resource through group membership

    Hello,
    I want to automatically provision a resource to a user if he is a member of a particular group.
    I have created the group,creted access policy(with approval = No) as well as group membership for that group .
    When I create a user and assign him the group and checks the resource assigned to him , that resource system validation remains in pending status.When I open the process form corresponding to it and without making any change just save it the resource assignment completes.
    plz tell me what is to be done to make it completely automatic.
    Thanks.

    Go to Process Def of that resource and select Auto Save check box there and try.

  • Collapsible Panel Group - automatic close/open?

    Is there a way to set it so the Spry Collapsible Panel Group automatically closes an open panel when you select to open another one?
    Thank you.

    Uhm... I think you should swap the collapsible panel group for a Spry Accordion: http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html

  • Automatically provision users in OCS 10g - where are the -p switches?

    Hi,
    in the past we used a bunch of scripts to automatically provision services to our nes OCS users. In OCS 9.0.4 (R2) we used the uniuser and unidsdiff commands for this.
    As it seems that Oracle has left these switches behind in the new binaries in the OCS 10g, I wonder if anybody has found a possibility to provision OCS services to users without using either the provisioning console or having to enter a admin pw in the terminal?
    This is more than bad, since I think that many customers of either the OCS 9.0.4.2 and stand alone calendars have been using this method for auto-provisioning and now Oracle has cut off this connectivity.
    In case anybody knows a other way around I would be very interested it that.
    Regards,
    Stephan

    Thanks Martin for replying.
    What I understood is Attach a task which will check if resource X is provisioned or not, if not provisioned then initiate provisioning of ResX.
    I think even in this case also , if we are trying to provision userA simultaneously Res1 & Res2 , after successful provisioning both resources, will trigger the task to check if ResX is provisioned or not , it will return false and both resource will trigger auto provisioning of ResX. Anyway I will try this option and update.
    How can I use database lock to avoid race condition in OIM?Database it self will not allow creation of same user twice(violate unique constraint).

  • How to do automate provisioning and deprovisioning

    Hi,
    I am a student and doing the final year project in sunidm. can anyone tell me how to automate provisioning and deprovisioning in sunidm.
    thanks

    You need to identity all your possible actions that could occur for this object. Create, Enable, Disable, Revoke, What fields do you plan to update? Now write a connection code using an IT Resource for input paramters, and then code your actions. Create the process tasks for each, and attach your adapters, and map your variables.
    -Kevin

  • Availability group Automatic failover

    Hi
    setup a simple 2 node AG, sync. (SQL 2014 enterprise on windows 2012R2 standard)
    if I set it as manual failover everything works as expected. however when I switch to automatic failover and stop SQL service on the primary node the AG resource in cluster does offline and doesn't failover to secondary node.
    both nodes are available to the cluster resourse.
    would appreciate your feedback as to what might be the reason
    Regards
    Shaunt

    Hi,
    I would verify if Database Availability Group means AlwaysOn Availability Group.
    How did you set the FailureConditionLevel?
    Whether the diagnostic data and health information returned by sp_server_diagnostics warrants an automatic failover depends on the failure-condition level of the availability group. The failure-condition level specifies what failure conditions
    trigger an automatic failover. There are five failure-condition levels, which range from the least restrictive (level one) to the most restrictive (level five). For details about failure-conditions level, see:
    http://msdn.microsoft.com/en-us/library/hh710061.aspx#FClevel
    There are two useful articles may be helpful:
    SQL 2012 AlwaysOn Availability groups Automatic Failover doesn’t occur or does it – A look at the logs
    http://blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx
    SQL Server 2012 AlwaysOn – Part 7 – Details behind an AlwaysOn Availability Group
    http://blogs.msdn.com/b/saponsqlserver/archive/2012/04/24/sql-server-2012-alwayson-part-7-details-behind-an-alwayson-availability-group.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support
    Hi,
    Thanks for the reply.
    It's an AlwaysOn Availability Group.
    In my test lab, I have changed the quorum configuration to a file share witness and that has allowed an automatic failover when I turn the primary replica server off (rather than power it off).
    I'll take a look at the links you provided.
    Regards,
    Bob

  • Password mail after automatic provisioning in CUP

    Hi Team,
    I have enable automatic provisioning.
    This results in creating a desire user with the stated role in the backend SAP System.
    I am also receiving the mails for each stage.
    However the mail which is recived as a notification to the user Says:
    Your Account is created in System XYZ, your ID is ABC.
    Click here to View password.
    Now whe the user clicks on the link for pasword it takes to a screen which only has Password written in Header but the actual value is missing and the entire screen is blank.
    Can anybody please help me to identify and resolve the problem.
    Thanks!
    Bets regards,
    Charu

    Please go to Configuration - Workflow - Reminders and look at the "Closing" tab.
    There you'll find a setting to display the password for a longer time, or send it in the closing email.
    Frank.

  • Enabling users and automatic provisioning

    Hello,
    I have a problem with automatic provisioning.
    In our context, here is what we want to do :
    - A user has a Start Date
    - Once this user has reached this date, the scheduled task "Enable User After Start Date" enables him in OIM
    - This activation gives a role to him
    - Having this role starts the provisioning of AD and Exchange resources
    And here is the problem we have :
    - The user was supposed to start today
    - The scheduled task ran at 2 AM and enabled him successfully
    - He had the role
    - But no resource provisioning started
    Do you have any clue on why it happened and how to solve it ?
    Thank you for your help !

    Hi,
    If the user having the role assigned.
    Check currosponding rule is active or not. It should active
    If it is active than,
    Check are you able to do access policy based provisioning via UI or not?
    Thanks,
    Kuldeep

  • Steps to enable Automatic provisioning in OIM 11g

    Hi,
    I am trying to configure my OIM 11g to automatically provision the resource into OID.
    I am able to do the provisioning manually but as per my requirement, when I register the user details in OIM the record must be created in OID automatically.
    Can u please mention the steps I must follow for the same.
    Regards

    Hi Pk
    I Checked the task "System Validation" status for the Resource.It was Pending as told I selected Auto Save in the process definition of the resource in design console.
    Now my resource gets provisioned but only when I attach user to the Role created by me. By default user gets attached to the All Users Role.
    What configuration changes should i make so that the user on creation gets attached to custom Role created by me.
    Regards

  • Error: Select at least one user or group for provisioning

    Hi all,
    In Hypeion shared services, I haved choosen User for provision but it show error "Select at least one user or group for provisioning". I don't know why, plx help me.
    Thanks.

    When you say you have chosen a user, did you highlight the user in the left box then click the arrow to move that user to the right box?
    What step are you at? What system and what version are you on?
    Are you selecting a user to provision roles? Are you selecting users in an application to provision security classes?

  • User and Group Security Provisioning

    Hi,
    I have a question regarding Group security in Planning. I am using EPM system 11. My basic question is, if I create a new Planning user (interactive user with no default access to dimensions), and assign that user to a Planning group, does the user automatically inherit all the dimension access assigned to that Group? From my experience, it seems that I must explicitly assign each User access to the dimensions they should be able to Read or Write, and that simply adding them to a group that has been given Write access to the Expense Account (for example) does not give a newly added user to that Group Write access.
    A quick note - when creating new Users, I first create and provision them in Shared Services. However, in order to be able to log in with them, I must recreate the user in EAS's User Directory. This seems redundant to make a user twice, but is the only way I am able to successful login with new users, otherwise the Planning login page says "failed to sync with user provisioning". I have not done this same procedure for the Groups I have created (i.e. I have made and provisioned the Groups in Shared Services, but not recreated them in EAS). Is it possible that this is why Users aren't inherittiing the access rights of the Group? I can provide more information if needed, any help or comments are appreciated. Thanks in advance.

    user3x3 wrote:
    1) EAS method is to open EAS, then open the Essbase Server Node, right-click on security, and click Externalize Users. When I do this there is no right-click option to externalize the users, and since it can only be done once and then not reversed I assume the previous administrator already did this. Since this is not availalbe, I must use the second method.
    If you log in with an administrator account you should see the "Externalize Users" option even if you have already externalized.
    I take it you did not configure your system, I take it was documented so you could have a look how it was configured.
    If essbase is on a different server than shared services then maybe the essbase server was not registered with the shared services registry when it was configured, that might the reason why you are getting the shared services error when you try to convert to shared services security, basically it doesn't know where shared services is. If that is the case then it will need to be configured again.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Pre-Populate AD Groups upon Provisioning of AD User

    I've been trying to figure out how to auto-populate groups in AD for users based on a single attribute in the OIM User Profile.
    For example, if a user's geographic code on the OIM User Profile is TX and he has an Administrator title, then I want that user to be added to the TEXAS USERS and the TEXAS Administrators group.
    How do I do this without using the Access Policy/Role configuration, but through adapter/lookup/triggers upon the provisioning of the AD account?
    I have adapters that now pre-populate single-valued attributes and lookup table values. However, it doesn't look like the multi-valued attributes work this way.
    Any ideas or references?
    Thanks!

    instead of pre-populate adapter write process task adapter through which you can populate all the required AD Groups on Child form using OIM API. attach this task on the success response of Create User task
    multivalued attribute you can't prepopulate using design console mapping you have to write your own code.
    follow the below steps
    1. create process task adapter pass(Process Instance Key, User Definition->Graphic code,User Definition->title)
    2. using API populate AD groups in AD child form based on condition. use below API
    tcFormInstanceOperationsIntf.addProcessFormChildData();
    3. create a task under "AD User" process def and integrate above adapter. map process data->process instance and other User Definition attributes which will decide what groups has to be given
    4. attach this task on the success response of Create User Task
    find API detail at below link
    http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcFormInstanceOperationsIntf.html#addProcessFormChildData%28long,%20long,%20java.util.Map%29
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Alternatives to SAP GRC Tool to monitor compliance & automatic provisioning

    Hello Gurus,
    Not sure if this would be the right forum to ask this but surely there exist tools in the market which are viable alternatives to the SAP GRC Tool. We are a large semiconductor firm and currently manage role assignments, user provisioning and auditing manually.It is a huge cost overhead and is labor intensive.
    Looking at possible alternatives?
    SAP GRC Tool is a strong contender but I am trying to weigh in other options with it and their comparisons.
    To your minds, what would be the biggest advantage of implementing GRC versus any other third party tool? What is the distinctive edge it provides? This is also to help me build a strong business for pushing GRC to the management.
    Appreciate any thougts/ideas/suggestions, at the earliest!! Much appreciated.
    -Tan
    Edited by: Tania Nijhawan on Jul 21, 2011 2:19 AM

    Hi Tania,
    GRC is a convenient grouping of solutions that have been developed and acquired over time. There are pros and cons in every application and no one can say that SAP GRC is 100% best and un comparable with any other compliance product in the market.
    But, I can strongly say that GRC gels well with all the SAP flavours such as ECC and BI, and it is easy to implement, incorporate, and manage.
    With the introduction of GRC 10, SAP is looking at more features and easy to manage compliance solutions. I bet you can't get A to B product comparision anywhere. I rather suggest you to look at the top ten features and advantages in different products in terms of deployment, adaptability, user friendlyness etc., and opt for the right one.
    Regards,
    Raghu

  • Unable to automatically provision users in AD via Access Policy

    Hello,
    I can connect to AD and provision a user manually to AD via OIM. Goes through just fine. However, if I use an Access Policy to do the same thing, it's stuck in the 'Provisioning' stage. All values are the same in the form.
    Any suggestions on why it works manually but not automatically? I have all values including AD server filled in my form. Is there additional configuration in the Access Policy that I'm missing?

    All fields are prepopulated.
    How do I enable autosave? It's doing the same thing with eDirectory too.
    If I go 'Edit' the task I see all values prepopulated. But they're not getting pushed out to the resource. So if I click 'View' all fields are blank.

  • Cannot remove a sync group and provisioning never stops

    I try to remove my sync group in Azure DataSync , but get a message "Cannot remove this sync group because one or more databases are currently provisioning, re-provisioning, de-provisioning, canceling sync or synchronizing. TracingId=cc4af9b5-f6c5-2ca9-9412-acbaee44f87b"
    My sync group is Sync Group ID: b9dfb07f-5415-487d-a6c7-c7caccf473b8_East / Subscription ID: 31e2bcf5-8078-4bf3-8898-ba771ea860ac
    And before I try to remove it, it has a trouble that Provisioning never finishes.
    The provisioning was adding reference new servers and the provisioning is continuing for more than 10 days.
    While removing the sync group, I had deleted all reference database other than the hub database, and applied DeprovisioningUtil.exe to the hub database.
    In the sync group, all databases were Azure SQL.  The sync group didn't use sync agent.
    The hub database seems to have no tables relating datasync like as "_dss" or "_traking" after I applied DeprovisioningUtil.exe.
    I had no more idea to do other than waiting, any other ideas?
    Best regards,

    Hi Kamiyn,
    Regarding to the error message and your description, it seems that you tried to remove sync group failed , I assume you only have one sync group, when you used DeprovisioningUtil tool, you should manually clean up all objects by running the deprovisioning
    utility from the same folder where the Data Sync Agent gets installed.
    Here is a similar issue about this error, you can refer to the post.
    http://social.msdn.microsoft.com/Forums/en-US/d0c50049-4d20-447e-85f9-904f7d146a40/cannot-remove-a-data-sync-group-even-dropping-the-involved-databases-and-servers?forum=ssdsgetstarted
    Hope it is helpful for you.
    Thanks,
    Sofiya Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for