Groupwise 2012 SP2 and Office 2010 integration

I have recently virtualized Groupwise 2012 and all seems to work well, Messenger launches on startup and it integrates with other applications etc but the only problem I have is when I open an Office 2010 document I get the following message popping up:
Please wait while Windows configures Microsoft Office Standard 2010
Gathering Required Information
This is in a MSI/Windows Installer box, I can only imagine that its installing some kind of user settings but I have scoured the internet and imported all the reg keys etc that I can find. This also happens everytime a document is launched, if it happened once a session I could maybe understand.
Has anyone else experienced this issue with Groupwise and Office?
Environment is ZAV 10 & Windows 7 x64
Thanks
Rob

robertleishman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

GroupWise 2012 SP2 Windows Client - Windows 8.1 x64

I have installed GroupWise 2012 SP2 Windows Client on a Windows 8.1 x64 laptop.
I can run GW for the first time, and it works fine.
When I close GW, and then reopen it I get the following error:
GroupWise is not properly installed. The GroupWise components could not be initialized. Please run GroupWise setup, or contact your system administrator.
A reboot will not fix the problem. If I completely remove GW and then reinstall it works fine, however once you close GW and then reopen it, you get the above message again.
Does anyone have any ideas?
Thank to everyone in advance.
Cheers,
Anthony Hill
Network Administrator
Mount Alvernia College

Originally Posted by konecnya
In article <[email protected]>, Anthonywhill
wrote:
> Yes I have the entire Office 2013 suite installed. Maybe Outlook is the
> problem?
>
Possibly, which was installed first?
Both Outlook and GroupWise use MAPI, and the files Outlook places are the
newer one, but it doesn't always do so if the older ones are in place.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!
Hi,
I have the same problem.
You resolve your ?

Windows 7 Pro and Enterprise and Office 2010 Not Able to re-Activate

In September 2012, I was tasked to provide desktop support for a small <50 seat school that uses a combination of Windows 7 Enterprise and Pro as well as Office 2010 Pro Plus with Volume Licenses purchased through Dell. In May of 2013, it was discovered
that our Microsoft Volume License agreement had lapsed and at the time we could not afford to renew it. In September we purchased a 5 seat license from JourneyEd for Windows 7 Pro and Office 2010 Pro Plus. Also in July 2013, we upgraded and consolidated our
server setup.
In November, we began to see notifications that our Microsoft products were becoming deactivated and needed to be reactivated. When we would try to reactivate, there would be an error message that said reactivating failed with no further message.
I need assistance to determine what is causing our licenses to deactivate and also how to fix this issue.
Thank you in advance for your assistance

Hi,
For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly at 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly
to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites
http://www.microsoft.com/licensing/worldwide.aspx to find contact information in their locations.
Thank you for your understanding!
Regards,
Ada Liu
TechNet Community Support

[VENDOR BUG] AND OFFICE 2010 issue Taskbar grouping Outlook 2010 and other applications grouping together.

i am currently using office 2010 and filesite 8.5 sp2 or sp3 and experiencing the same issue with the icon grouping in the taskbar in all the threads i have read the responses state that the solution was to upgrade to office 2010 well that might have been good
and well for most cases but it seems the issue is still relevant in regards to office 2010 pro plus. We were using office 2010 standard and it turned out that we had licenses for pro plus so we had to true up as per Microsoft and in doing so this
revealed an unknown issue we had not previously experienced.
To get to the point i'm using office 2010 and filesite in conjunction with one another and experiencing the same issue that has been discussed on multiple different threads and unfortunately attorneys do not like to hear answers that do not solve their problems.
specially in an environment where we have close to 1000 users this may potentially affect.
Has anyone experienced this and/or found a solution to it in the specific situation i am explaining. (use of filesite 8.5 Sp2 or Sp3 and office 2010 pro plus mainly outlook 2010 pro plus.)
Any help or direction is greatly appreciated.
-m

Hi,
When did this issue started? Was there any changes in your side? Like add-in version update? Or other updates?
Is it possible to disable all the other add-ins only keep filesite enabled, check if the Office is still“grouping
in the taskbar”? Then we could enable the add-ins one by one. Though this we could identify if there are add-ins conflicts.
Does this “grouping in the taskbar” issue only occur when we have filesite installed? If so, it would be better that you post this issue in filesite support channel to
get more insightful support.
Thank you for your understanding.

Unexpected restarts when deploying Windows 7 and Office 2010 updates

Hi
I am deploying Windows 7 and Office 2010 updates via SCCM 2012 sp1 and have a couple of questions
Question 1)
The updates are made available to clients at 9am on a Tuesday morning. The users get notification that updates are available to install. If the user doesn't install the updates, the client will wait 24hrs and then install the updates automatically.
We have set the restart behaviour to 24hrs, so again, the user will get a pop up saying that their machine will restart in 24hours. In my testing I have seen no more pop ups appear until 15 minutes before a restart is due and then a window appears
with a count down of 15 minutes but I think this might be standard behaviour. I am not sure why there are options in the client settings to remind users frequently about the impending installation of update but not of impending restarts. The
reason we delay the restart by 24hrs is to give the users the chance to restart their machines over night. Is there a way of providing more notifications of computer restarts ? The User Experience in the deployment of the updates is set to
Display in software center and show all notifications. We have Group Policy set to Not Configured for Windows Updates apart from the user policy
Remove Access To All Windows Update Features which is set to 0 - Do not show any notifications.
Question 2)
Another issue we have is that we have client machines restarting without any warning at all. I have tested setting the user experience to suppress restarts but have the issue regardless. It appears that this happens if the client
is off when the deployment schedule reaches its deadline and the restart time is missed. I had one user who did restart her machine because she was prompted to restart. When the machine came back up it looked like it installed another update and
then just resarted without any warning. This hasn't happened often but a one user was on a Lync call when the restart occured and she was not happy.
Any help would be much appreciated.
Thanks

Hi Daniel
I have done an RSOP on a VM I am testing and only have the user policy :
Remove Access To All Windows Update Features which is set to
0 - Do not show any notifications.
And the machine policy :
Specify intranet Microsoft update service location which is set to
Enabled The GPO Name is Local Group Policy
The policies look OK.
As a test I have deployed some updates and set the user experience to
Display all notifications and set the Suppress restarts
for both Servers and Workstations. When I deploy the updates, I get notifications that the updates are installing (when the deadline is met) and then I get a prompt telling me that a restart is required. I also get a windo letting me restart now
or I can ask to be reminded in x number of hours. This seems like expected behaviour. It does not force a restart. However if I leave the VM on over night I come in the following day and can see it has restarted. looking at the WindowsUpdate.log I
can see that at 3:15am the line AUInvoking reboot system. It looks like Windows Updates and not SCCM is forcing the restart.
Thanks

GroupWise 2012 SP2 - silent install - Reboot force?!

Hi, I was asked to create a silent deployment for GroupWise 2012 SP2 for our ZENworks. So I followed the steps that I found here: Novell GroupWise 2012 Deployed Using ZCM 11 SP1 Part 1 - YouTube. My bundle do install silently GroupWise 2012 SP2 but one of the requirements force a reboot of the computer the first time that the bundle is launch. And I did make sure to configure everything to not reboot during the installation. After checking a few log files I found that it's the vcruntimes.msi that forces the reboot. So I tried to install it manually before launching my bundle but I still get a reboot. So is there any way to bypass this?
Thanks in advance for the help!

GuillaumeBDEB,
There are several ways to get rid of the reboot.
One way is to open the vcruntimes.msi with orca (or with another msi editor). When you look at the property table you see a property RebootYesNo with a value Yes. Set this to No.
Another way is to edit the install.bat. If you followed the youtube demo which you stated in your post, you used an install.bat. In there is an entry (set GW_OPTS_VCRUNTIMES=/qn) that basically says to msiexec (which is the proces that installes msi's) to do a quiet install with no gui. Add option /noreboot to get rid of it...
Hope this helps!

Smartview 11.1.2.1 on Win 7 and Office 2010 32bit

I installed 11.1.2.1 smartview on Win 7 and Office 2010 32 bit. The installation was successful but when I try to open Excel or Outlook I get the error that office encountered a serious problem with the add-in and disables the add-in to proceed. Any suggestions to make this work?
Thank you.

Yes in Window 7 and on Vista when installing you have to run as an administrator or disable UAC. Once installed you do not need to run as an administrator. On these new OS's even though you have admin right by default you do not run anything as an admin, this is a good thing but you have to be aware of it. http://technet.microsoft.com/en-us/library/cc709691(WS.10).aspx#BKMK_WhatIs
Glad it is working!

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, merge the calendars on the Iphone so there is only 1 calendar to sync?

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

Is Lync 2013 and Office 2010 Home and business compatible?

hi,
Is Lync 2013 and Office 2010 Home and business compatible?
tnx

Lync 2013 and office 2010 is compatible with limited features
The following features are available only with Office 2010 or Office 2013:
Contact card with expanded options, such as video call and desktop sharing
Quick search from the Find a Contact field in Outlook
Reply with an IM or call from the Outlook Home ribbon in the Mail, Calendar, Contacts, and Tasks folders
Lync Contacts list in Outlook To-Do Bar
Office Backstage (File tab) presence status, program sharing, and file transfer
Presence menu in Microsoft Office SharePoint Workspace 2010 (formerly Microsoft Office Groove 2007)
Presence menu extensibility
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg412817.aspx
For your issue, verify from lync version {for example , if your office 64 bit, Lync must be 64 bit also}
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

OfficeJet 4315 no longer works after Win 7 and Office 2010 service packs applied

I've used OfficeJet 4315 on a Toshiba Satellite with WinXP (SP3) and Office 2003 and been delighted with the printer. I recently migrated to a brand-new Acer Aspire with Win 7 and Office 2010 (home & student ed.) At first, the 4315 worked well--in fact, all I had to do was plug in the USB connection and the in-OS drivers installed automatically. However, something has now caused the printer too be essentially useless! I think it happened after I applied SP1 to Win 7 and/or the service pack to Office 2010. I can no longer print Word files (.doc or .docx), Excel spread sheets (.xls or .xlsx), PDFs, Web pages, or even e-mails, The only things I can print are .txt files or equivalent and .jpg files or equivalent. I've tried deleting and reinstalling the printer (including deleting the drivers and reloading them from Windows Update). I don't believe I should have to replace a perfectly good printer just to support Windows 7 and Office 2010. I NEED HELP URGENTLY with this problem! If anyone has any knowledge or ideas, I'd be forever in your debt. (HP, I'd even pay to get the help I need on this one!!) TIA.

Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Resource booking with Windows 8.1 and office 2010

I've two SP3 Laptops running 8.1 on out network. I've Office 2010 installed on these and they are mostly working fine;
However they cannot book resources - this is a common win7 fault we would fix here - http://support.microsoft.com/kb/982774/en-gb
But its not working under Win 8.1, neither the fixit icon or the manual config.
We are presently running exchange 2003
Is there a 8.1 2010 fix you know of?
Many thanks,
Stuart
I asked this yesterday of this forum -
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/resource-booking-with-windows-81-and-office-2010/1b52161c-eb71-4dd5-a19e-14a4fdfe0abb
, but they said that this pro forum was more suited for more technical issues.
Stuart

Hi,
Currently I don't have the exact same environment to test, please make sure you have modified the registry keys correctly and if possible, try this manually on multiple Windows 8.1 machines to see if this is an individual issue or widely affected. If this
fix doesn't work on all Windows 8.1 machines, please provide feedback or to report this issue with this solution, please leave a comment on the "Fix it for me" blog or send an
email message.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Windows 7 and Office 2010 activation issues

hey everyone
since a few days we facing really strange issue here within our school. We are running windows 7 machines and office 2010 and all our different machine types is it VDI VMs, physical laptops, desktop computer or provisioning machines (Citrix PVS) are facing
issues with the licensing.
Sometimes Windows 7 Key is not installed anymore, sometime it is just not activated same for office. So the KMS is installed with the KMS host keys since years and KMS service is running. Also the DNS Output points to the server
C:\Users\.........>nslookup -type=srv _vlmcs._tcp
Server: DC....
Address: 192.168.X.Y
_vlmcs._tcp.Domain SRV service location:
priority = 0
weight = 0
port = 1688
svr hostname = KMSHost
KMSHost.domain internet address = 192.168.X.Z
Also when i manually force the machines to update against KMS with VAMT or CLI it is working. What could cause that issues?
Time issues?
Scripts?
Thanks for any clue and advice

Hi Duke,
"since a few days we facing really strange issue here within our school"
Have you made any modifications to the KMS server or the whole environment ?Will the issue persist or occur randomly ?Will it occur on the specific ones or all the machines ?
There are several specific log recorded in the event viewer when the KMS try to activate the machines .We can try to check the event logs both from the client and the KMS server to troubleshoot this issue .Please also check the Windows logs\Applications
,system logs for useful information to troubleshoot this issue .
Here are two links for reference:
How to troubleshoot the Key Management Service (KMS)
https://technet.microsoft.com/en-us/library/ee939272.aspx
KMS host troubleshooting & monitoring
http://blogs.technet.com/b/quenguyen/archive/2011/11/09/kms-host-troubleshooting-amp-monitoring.aspx
Best regards

EPM 11.1.2 with Windows 7 and Office 2010

Hi all,
We are getting majorly upgraded to Windows 7 and Office 2010 soon. We use EPM 11.1.2 suite of products. Will all the end-user web applications still work?
I already found out that Smartview 11.1.2 is not supported for Office 2010.
Does anybody have experience working with 11.1.2 and Windows 7?
Thanks,
Sujani

According to Oracle Support, KB ID 1191235.1, there is Office 2010 suport for 9.3.3 and 11.1.1.3.02. That release is patch 9889521 and is for SmartView only.
Havnig said that, people seem to be using it:
Essbase excel add-in 11.1.2 with office 2010 Excel ?
Re: Hyperion Essbase Excel Addin - Unable to connect
Of course you take your own chances with this -- it is an unsupported combination right now.
Regards,
Cameron Lackpour
P.S. John Booth posted today a different patch release (I know, you're on 11.1.2, but for the 11.1.1.3 readers): http://www.network54.com/Forum/58296/thread/1294100830/Does+11.1.1.3+support+Windows+7+and+Office+2010-
I'd be more inclined to go with John's patch number than mine -- I am just browsing through Oracle support -- he does infrastructure for real.
Edited by: CL on Jan 4, 2011 2:18 PM
One note -- the KB article was dated 21 Dec 2010, so it's pretty close to up to date.

Windows 7 and Office 2010

I am trying to setup a BB on a computer that is running windows 7 (64bit) and office 2010. For some reason it will not sync correctly. Has anyone had issues witht this? The phone is an 8850.

Hi and Welcome to the Forums!
Many have had issues, many have had success. The only way to diagnose is with details..."it will not sync correctly" only leaves us to guess. Here are some details that might help:
1) Your BB Desktop Software version -- all 4 octets please
2) Your BB OS level -- again, all 4 octets
3) Your carrier/country
4) What, exactly, happens when you try to sync? Can you configure and not sync? Can you not configure? Are there error messages? Details please to help us to help you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Groupwise 2012 SP2 and Office 2010 integration

Similar Messages

Maybe you are looking for