GroupWise 2012 SP2 - silent install - Reboot force?!

Hi, I was asked to create a silent deployment for GroupWise 2012 SP2 for our ZENworks. So I followed the steps that I found here: Novell GroupWise 2012 Deployed Using ZCM 11 SP1 Part 1 - YouTube. My bundle do install silently GroupWise 2012 SP2 but one of the requirements force a reboot of the computer the first time that the bundle is launch. And I did make sure to configure everything to not reboot during the installation. After checking a few log files I found that it's the vcruntimes.msi that forces the reboot. So I tried to install it manually before launching my bundle but I still get a reboot. So is there any way to bypass this?
Thanks in advance for the help!

GuillaumeBDEB,
There are several ways to get rid of the reboot.
One way is to open the vcruntimes.msi with orca (or with another msi editor). When you look at the property table you see a property RebootYesNo with a value Yes. Set this to No.
Another way is to edit the install.bat. If you followed the youtube demo which you stated in your post, you used an install.bat. In there is an entry (set GW_OPTS_VCRUNTIMES=/qn) that basically says to msiexec (which is the proces that installes msi's) to do a quiet install with no gui. Add option /noreboot to get rid of it...
Hope this helps!

Similar Messages

  • GroupWise 2012 SP2 Windows Client - Windows 8.1 x64

    I have installed GroupWise 2012 SP2 Windows Client on a Windows 8.1 x64 laptop.
    I can run GW for the first time, and it works fine.
    When I close GW, and then reopen it I get the following error:
    GroupWise is not properly installed. The GroupWise components could not be initialized. Please run GroupWise setup, or contact your system administrator.
    A reboot will not fix the problem. If I completely remove GW and then reinstall it works fine, however once you close GW and then reopen it, you get the above message again.
    Does anyone have any ideas?
    Thank to everyone in advance.
    Cheers,
    Anthony Hill
    Network Administrator
    Mount Alvernia College

    Originally Posted by konecnya
    In article <[email protected]>, Anthonywhill
    wrote:
    > Yes I have the entire Office 2013 suite installed. Maybe Outlook is the
    > problem?
    >
    Possibly, which was installed first?
    Both Outlook and GroupWise use MAPI, and the files Outlook places are the
    newer one, but it doesn't always do so if the older ones are in place.
    Andy of
    KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!
    Hi,
    I have the same problem.
    You resolve your ?

  • SQL Express 2012 SP2 Offline Install Available?

    We have a customer where SQL Express 2012 SP2 is needed for an application (the application is not yet validated for SQL Express 2014).
    The computer for this application is not connected to the internet (Win7x64).
    Is there an install package for this?

     It does complain that it cannot connect to Windows Update, but you can click past that. 
    Yes, the installer supports "live update slipstream" for newer SQL Server Service Pack, but you can skip this during installation.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Groupwise 2012 SP2 and Office 2010 integration

    I have recently virtualized Groupwise 2012 and all seems to work well, Messenger launches on startup and it integrates with other applications etc but the only problem I have is when I open an Office 2010 document I get the following message popping up:
    Please wait while Windows configures Microsoft Office Standard 2010
    Gathering Required Information
    This is in a MSI/Windows Installer box, I can only imagine that its installing some kind of user settings but I have scoured the internet and imported all the reg keys etc that I can find. This also happens everytime a document is launched, if it happened once a session I could maybe understand.
    Has anyone else experienced this issue with Groupwise and Office?
    Environment is ZAV 10 & Windows 7 x64
    Thanks
    Rob

    robertleishman,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Outlook 2013 connecting to Groupwise 2012 any solution?

    I have been looking for an answer to this question, I have a MS exec that has just been hired in a company that I support. He wants his calender and scheduling to work with the outlook 2013 client. They currently have a Groupwise 2012 sp2 server installed. I have looked, but have yet to find an answer.. I just love the MS pricks..

    laurabuckley wrote:
    > Your options are POP3 or IMAP:
    >
    http://www.novell.com/documentation/...a/bo0n5mr.html
    >
    > However, I'm not too sure how well either of those work with the
    > calendar
    POP/IMAP is just for e-mail. It might be possible to install the
    GW2012 client and OL2013 on the same machine, to where Outlook
    essentially uses the GW2012 client as a "plugin" to talk to the GW
    backend. This would give e-mail, calendar, and contact abilities to
    Outlook.
    Your world is on the move. http://www.novell.com/mobility/
    BrainShare 2014 is coming. http://www.novell.com/brainshare/

  • GroupWise Client 2012 SP2 & Windows 8.1 64bit & addressbook

    Hello.
    On one Win 8.1 Prof. 64bit worksation I've got several problem with GW Client 2012 SP2 Build 115186.
    Under Tools -> Options -> Security I've error messages from WMS "No version of serviceprovider of the personal Groupwse addressbook available (Sorry for that worse translation, the german version is installed).
    The addressbook don't have access to the personal and the Systemaddressbook
    Some HTML-messages don't work (Page not found)
    Links in E-Mails don't work (No application found)
    On the machine also MSO 2010 Prof. 32bit is installed (Outlook included)
    I suppose,that the WMS isn't installed on the machine. Reparing the programs not solved the problem.
    Any ideas to solve the failures?
    Thanks in advance for your answers.
    Best regards.
    Dirk Emmermacher

    Am 14.10.2014 10:16, schrieb Emmermacher:
    >
    > Hello.
    >
    > On one Win 8.1 Prof. 64bit worksation I've got several problem with GW
    > Client 2012 SP2 Build *115186*.
    > Under Tools -> Options -> Security I've error messages from WMS "No
    > version of serviceprovider of the personal Groupwse addressbook
    > available (Sorry for that worse translation, the german version is
    > installed).
    > The addressbook don't have access to the personal and the
    > Systemaddressbook
    > Some HTML-messages don't work (Page not found)
    > Links in E-Mails don't work (No application found)
    >
    > On the machine also MSO 2010 Prof. 32bit is installed (Outlook
    > included)
    > I suppose,that the WMS isn't installed on the machine. Reparing the
    > programs not solved the problem.
    >
    > Any ideas to solve the failures?
    > Thanks in advance for your answers.
    Some basics.
    1. Under no circumstances should wms.exe from groupwise be installed on
    a machine that has Outlok installed. Sometimes this can happen
    nevertheless, and cause havoc to both programs.
    2. If you install Outlook and Groupwise on the same machine, Outlook has
    to be installed first.
    This, however should have no influence on your HTML issues. Can you give
    more details?
    CU,
    Massimo Rosen
    Novell Knowledge Partner
    No emails please!
    http://www.cfc-it.de

  • GroupWise 2012 installed on site desaster recovery

    We GroupWise System 2012 SP2, and I need to install system desaster recovery in two DR sites, I wonder if GroupWise has tools or resources for this kind of redundancy?

    In article <[email protected]>, Rogerio
    Lopes Alves wrote:
    > We GroupWise System 2012 SP2, and I need to install system desaster
    > recovery in two DR sites, I wonder if GroupWise has tools or resources
    > for this kind of redundancy?
    >
    On option is to have the agents all installed at the remote locations,
    and use DBCopy (comes with GroupWise) to incrementally copy the data to
    each site.
    8th post of this thread has a useful script for this.
    https://forums.novell.com/novell-pro...boration/group
    wise/groupwise-2012/gw2012-install-setup-admin/455580-dbcopy-restore-que
    stion.html
    VMware's SRM and Novell's BCC are also approaches to look at.
    Andy Konecny
    Knowledge Partner (voluntary SysOp)
    KonecnyConsulting.ca in Toronto
    Andy's Profile: http://forums.novell.com/member.php?userid=75037

  • Installing SQL 2012 SP2 - The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    I am trying to install the SQL 2012 SP2 in one of the servers. I am getting the error as :
    TITLE: SQL Server Setup failure.
    SQL Server Setup has encountered the following error:
    The specified module could not be found. (Exception from HRESULT: 0x8007007E)
    Error code 0x84B10001.
    The same setup is working in other servers, but on a particular server I am getting this error.
    Server configuration: Windows server 2008 r2 standard edition, servvice pack 1 , 64 bit OS
    How to fix this?
    Thanks

    Hi Venkatzeus,
    Based on my research, the issue is caused by that some .dll files are corrupt or missing during the installing of SQL Server 2012 SP2.
    In order to troubleshoot this issue, please view the detail error message in SQL Server Setup Log Files. We can read the Summary text under %programfiles%\Microsoft SQL Server\110\Setup Bootstrap\Log\, and the Detail text in the place %programfiles%\Microsoft
    SQL Server\110\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt. For more details, please see:
    View and Read SQL Server Setup Log Files
    Besides, here are some similar issues for your references:
    https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
    https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • GroupWise 2012 Deployment Bundle Issue - Not Installing

    Hello There,
    I have an issue to deploy the GroupWise 2012 client via Zen 11.1 (Had no prob to deploy GroupWise 8)
    I followed the well-done tutorial from youtube (Novell GroupWise 2012 Deployed Using ZCM 11 SP1 Part 1 - YouTube) or/and the guide (http://www.novell.com/feeds/nih/wp-c...5/GW06_lab.pdf) but it seems that it does not want to work as shown. I googled to see if anyone had the same prob but it seems not to be the case. So I assume I missed something but I do not find the trick.
    Everything works until it launches the install.bat as when I get the notification that it has completed the installation the only thing I see is that no GroupWise 2012 is installed at all and that GroupWise 8 has been uninstalled. During the process I see that it copies the first 800 files in Program Files\novell\groupwise but just before telling me that he finished all files are removed. I did not do the step where it should launch GroupWise.
    I re-created a bundles and tried to install GroupWise 2012 as GroupWise 8 but it did not work.
    It is really frustrating as I really need it to be deployed and that it was meant to be simple.
    I would be grateful if anyone could help on that.
    Thank you in advance,
    OAKFND
    PS: Here is a part of the log on the workstation
    [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] [] [LaunchActionHandler] [] [Exiting ProcessAction] [] []
    [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Action handler Launch Action finished processing Launch GroupWise Installation successfully.] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Caching action set 5c2142000453e9b1159e677b04577dd9] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionSet count: 7] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionResult count: 6] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
    [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\3b17bbd3-f015-4c92-a7e0-c337a893ab0f in 10 ms] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Processing action: Delete GroupWise2012 Directory] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Caching action set 5c2142000453e9b1159e677b04577dd9] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
    [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionSet count: 7] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionResult count: 7] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 5 ms] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\d4bb83fe-6151-42fe-9656-c2c35f55c0d2 in 9 ms] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Updating status for set 4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Work set completed. Deleting cached action set 5c2142000453e9b1159e677b04577dd9] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Deleting work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManUtil] [] [DestroyDauSession countdown reset to 500000 milliseconds for session 6088812] [] []
    [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [GetResultSetRequest returning DO_NOTHING] [] []
    [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [Status Library] [] [SetStatus: srchSql= select successcount, failurecount from zstatus where userguid = '' and objectguid = '5c2142000453e9b1159e677b04577dd9' and operationtype = 'Bundle.Install'] [] []
    [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [Status Library] [] [SetStatus: sql= insert into zstatus(timestamp, userguid, objectguid, source, objecttype, operationtype, operationstatus, successcount, failurecount, objectversion ) values ( 634829756180156250,'','5c2142000453e9b1159e677b045 77dd9',1,'B','Bundle.Install','S',6,1,0)] [] []
    [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [ZIconMod] [] [Received exception closing the activityIndicator to user session (999): Failed to connect to an IPC Port: The system cannot find the file specified.
    Server stack trace:
    at System.Runtime.Remoting.Channels.Ipc.IpcPort.Conne ct(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
    at System.Runtime.Remoting.Channels.Ipc.ConnectionCac he.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
    at System.Runtime.Remoting.Channels.Ipc.IpcClientTran sportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
    at System.Runtime.Remoting.Channels.BinaryClientForma tterSink.SyncProcessMessage(IMessage msg)
    Exception rethrown at (0):
    at System.Runtime.Remoting.Proxies.RealProxy.HandleRe turnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateI nvoke(MessageData& msgData, Int32 type)
    at Novell.Zenworks.NotifyIcon.Remoting.IZenIconUIServ er.CloseActivityIndicator(String guid, String status, String name)
    at Novell.Zenworks.NotifyIcon.Module.ZenNotifyIcon.Cl oseActivityIndicator(Session session, String guid, String status, String name)] [] []
    [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [BundleManager] [] [Finished Process Action for Item: GroupWise 2012 Installation or Upgrade Action: INSTALL Result: True] [] []
    [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [From IconUtils.cs)] [] []
    [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [Required icon found, sending for overlay] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [Evaluating System Requirements for GroupWise 2012 Installation or Upgrade; GUID: 5c2142000453e9b1159e677b04577dd9] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirement Handler] [] [Comparing actualValue: 5.1.2600.196608 with expectedValue: 5.1.2600.196608 for compareOperator: GreaterEquals returned True] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [First requirement returned True] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Got architecture - 32] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Expecting architecture - 32] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Returning - True] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [AND-ing result(True) with previous results (True) yields True] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [First requirement returned True] [] []
    [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [System Requirements Passed for GroupWise 2012 Installation or Upgrade] [] []

    I don't have GW for any type of testing, but what I would do for testing
    is .......
    Replace the Install.bat with just calling CMD.exe
    then from the command prompt
    walk through the commands in the install.bat one by one to see what is
    happening............
    On 9/11/2012 12:06 PM, OakFND wrote:
    >
    > Hello There,
    >
    > I have an issue to deploy the GroupWise 2012 client via Zen 11.1 (Had
    > no prob to deploy GroupWise 8)
    >
    > I followed the well-done tutorial from youtube ('Novell GroupWise 2012
    > Deployed Using ZCM 11 SP1 Part 1 - YouTube'
    > (http://www.youtube.com/watch?v=V9Wa2ETf7ag)) or/and the guide
    > (http://www.novell.com/feeds/nih/wp-c...5/GW06_lab.pdf)
    > but it seems that it does not want to work as shown. I googled to see if
    > anyone had the same prob but it seems not to be the case. So I assume I
    > missed something but I do not find the trick.
    >
    > Everything works until it launches the install.bat as when I get the
    > notification that it has completed the installation the only thing I see
    > is that no GroupWise 2012 is installed at all and that GroupWise 8 has
    > been uninstalled. During the process I see that it copies the first 800
    > files in Program Files\novell\groupwise but just before telling me that
    > he finished all files are removed. I did not do the step where it should
    > launch GroupWise.
    >
    > I re-created a bundles and tried to install GroupWise 2012 as GroupWise
    > 8 but it did not work.
    >
    > It is really frustrating as I really need it to be deployed and that it
    > was meant to be simple.
    >
    > I would be grateful if anyone could help on that.
    > Thank you in advance,
    > OAKFND
    >
    > PS: Here is a part of the log on the workstation
    >
    > [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] []
    > [LaunchActionHandler] [] [Exiting ProcessAction] [] []
    > [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Action handler Launch Action finished processing
    > Launch GroupWise Installation successfully.] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Caching action set
    > 5c2142000453e9b1159e677b04577dd9] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade
    > (INSTALL)] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ ActionSet count: 7] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ ActionResult count: 6] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [WorkSet using session id (ZenName):
    > b683416a643739f118900002b3dfe2fa] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [WorkSet using session id (ZenName):
    > b683416a643739f118900002b3dfe2fa] [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa]
    > [] []
    > [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9)
    > DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
    > UserContext{_LocalId=SYSTEM;
    > _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    > [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
    >
    > [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9)
    > PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99,
    > UserContext{_LocalId=SYSTEM;
    > _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    > [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program
    > Files\Novell\ZENworks\cache\zmd\ZenCache\3b17bbd3-f015-4c92-a7e0-c337a893ab0f
    > in 10 ms] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade
    > as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Processing action: Delete GroupWise2012
    > Directory] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Caching action set
    > 5c2142000453e9b1159e677b04577dd9] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade
    > (INSTALL)] [] []
    > [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ ActionSet count: 7] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ ActionResult count: 7] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [WorkSet using session id (ZenName):
    > b683416a643739f118900002b3dfe2fa] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [WorkSet using session id (ZenName):
    > b683416a643739f118900002b3dfe2fa] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa]
    > [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9)
    > DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
    > UserContext{_LocalId=SYSTEM;
    > _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 5 ms] [] []
    >
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9)
    > PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99,
    > UserContext{_LocalId=SYSTEM;
    > _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    > [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program
    > Files\Novell\ZENworks\cache\zmd\ZenCache\d4bb83fe-6151-42fe-9656-c2c35f55c0d2
    > in 9 ms] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade
    > as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Updating status for set
    > 4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [Work set completed. Deleting cached action set
    > 5c2142000453e9b1159e677b04577dd9] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [Deleting work set GroupWise 2012 Installation or
    > Upgrade (INSTALL)] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [WorkSet] [] [WorkSet using session id (ZenName):
    > b683416a643739f118900002b3dfe2fa] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9)
    > DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
    > UserContext{_LocalId=SYSTEM;
    > _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
    >
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ActionManUtil] [] [DestroyDauSession countdown reset to 500000
    > milliseconds for session 6088812] [] []
    > [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
    > [] [ActionManager] [] [GetResultSetRequest returning DO_NOTHING] [] []
    > [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
    > [] [Status Library] [] [SetStatus: srchSql= select successcount,
    > failurecount from zstatus where userguid = '' and objectguid =
    > '5c2142000453e9b1159e677b04577dd9' and operationtype = 'Bundle.Install']
    > [] []
    > [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
    > [] [Status Library] [] [SetStatus: sql= insert into zstatus(timestamp,
    > userguid, objectguid, source, objecttype, operationtype,
    > operationstatus, successcount, failurecount, objectversion ) values (
    > 634829756180156250,'','5c2142000453e9b1159e677b045 77dd9',1,'B','Bundle.Install','S',6,1,0)]
    > [] []
    > [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
    > [] [ZIconMod] [] [Received exception closing the activityIndicator to
    > user session (999): Failed to connect to an IPC Port: The system cannot
    > find the file specified.
    >
    >
    > Server stack trace:
    > at System.Runtime.Remoting.Channels.Ipc.IpcPort.Conne ct(String
    > portName, Boolean secure, TokenImpersonationLevel impersonationLevel,
    > Int32 timeout)
    > at
    > System.Runtime.Remoting.Channels.Ipc.ConnectionCac he.GetConnection(String
    > portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
    > at
    > System.Runtime.Remoting.Channels.Ipc.IpcClientTran sportSink.ProcessMessage(IMessage
    > msg, ITransportHeaders requestHeaders, Stream requestStream,
    > ITransportHeaders& responseHeaders, Stream& responseStream)
    > at
    > System.Runtime.Remoting.Channels.BinaryClientForma tterSink.SyncProcessMessage(IMessage
    > msg)
    >
    > Exception rethrown at (0):
    > at
    > System.Runtime.Remoting.Proxies.RealProxy.HandleRe turnMessage(IMessage
    > reqMsg, IMessage retMsg)
    > at
    > System.Runtime.Remoting.Proxies.RealProxy.PrivateI nvoke(MessageData&
    > msgData, Int32 type)
    > at
    > Novell.Zenworks.NotifyIcon.Remoting.IZenIconUIServ er.CloseActivityIndicator(String
    > guid, String status, String name)
    > at
    > Novell.Zenworks.NotifyIcon.Module.ZenNotifyIcon.Cl oseActivityIndicator(Session
    > session, String guid, String status, String name)] [] []
    > [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
    > [] [BundleManager] [] [Finished Process Action for Item: GroupWise 2012
    > Installation or Upgrade Action: INSTALL Result: True] [] []
    > [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25]
    > [] [BundleManager] [] [From IconUtils.cs)] [] []
    > [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25]
    > [] [BundleManager] [] [Required icon found, sending for overlay] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [BundleManager] [] [Evaluating System Requirements for GroupWise 2012
    > Installation or Upgrade; GUID: 5c2142000453e9b1159e677b04577dd9] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [Requirement Handler] [] [Comparing actualValue: 5.1.2600.196608 with
    > expectedValue: 5.1.2600.196608 for compareOperator: GreaterEquals
    > returned True] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [Requirements Module] [] [First requirement returned True] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [ArchitectureRequirementHandler] [] [Got architecture - 32] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [ArchitectureRequirementHandler] [] [Expecting architecture - 32] []
    > []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [ArchitectureRequirementHandler] [] [Returning - True] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [Requirements Module] [] [AND-ing result(True) with previous results
    > (True) yields True] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [Requirements Module] [] [First requirement returned True] [] []
    > [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
    > [] [BundleManager] [] [System Requirements Passed for GroupWise 2012
    > Installation or Upgrade] [] []
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • How to install sp2 for sql server 2012 , where sql server 2012 instnce is installed in cluster mode

    Hi Everyone,
    I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
    Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
    Please share installation guide for sp2 in cluster instance, if any one have.
    Thanks All
    Aditya

    Did you searched a bit before posting question.
    Please read
    https://support.microsoft.com/kb/958734?wa=wsignin1.0
    http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
    http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Silent Install Exchange 2010 SP2 RU7 Management Tools On Windows 7?

    We already have Exchange 2010 SP2 RU7 running on a server. We would like to automate deploying the management tools to the Windows 7 workstations of admins that use the console.
    Would a batch file with these commands work when run on a Windows 7 SP1 workstation?
    dism /online /enable-feature /featurename:IIS-WebServerRole
    dism /online /enable-feature /featurename:IIS-WebServerManagementTools
    dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
    dism /online /enable-feature /featurename:IIS-Metabase
    dism /online /enable-feature /featurename:IIS-LegacySnapIn
    Setup /r:MT
    How can we deploy the management tools to the workstations with SP2 and RU7 already installed so we don't have to do a separate step of installing the service pack and rollup after doing the base install?

    Hi,
    First, please make sure the Windows 7 version is 64-bit version. When you create a batch file, you should specify the shared Exchange setup file, you can refer to the following thread.
    http://social.technet.microsoft.com/Forums/en-US/e3023a7f-dd70-44c5-94c8-528d8eb1a8a1/silent-install-of-exchange-2010-mangement-tools-sp2?forum=mdt
    After you have installed Exchange Management Tool on Windows 7, please always ensure you install any Exchange Service Pack which is the same with Exchange server on the PC running EMC.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Do I need to install x64 and x86 versions of SQL Server 2012 SP2?

    Hi,
    I have installed x64 version of SQL 2012 SP2.  Do I need to install x86 version of SP2 as well?
    (I have some x86 components installed as well that came with various things like SSDT-BI and/or Visual Studio installations.)
    When I click "SQL Server Installation Center (64-bit).lnk" shortcut and run "Installed SQL Server features discovery report", it says "Microsoft SQL Server 2012 Setup Discovery Report".
    When I click "SQL Server Installation Center.lnk" shortcut and run same, it says "Microsoft SQL Server 2012 Service Pack 1 Setup Discovery Report".
    Both reports say the same thing: the installed version is 11.2.5058.0, which is SP2.

    Hi,
    I have installed x64 version of SQL 2012 SP2.  Do I need to install x86 version of SP2 as well?
    (I have some x86 components installed as well that came with various things like SSDT-BI and/or Visual Studio installations.)
    When I click "SQL Server Installation Center (64-bit).lnk" shortcut and run "Installed SQL Server features discovery report", it says "Microsoft SQL Server 2012 Setup Discovery Report".
    When I click "SQL Server Installation Center.lnk" shortcut and run same, it says "Microsoft SQL Server 2012 Service Pack 1 Setup Discovery Report".
    Both reports say the same thing: the installed version is 11.2.5058.0, which is SP2.
    Hello,
    No you dont have to install X86 version
    SQL server 2012 installable will install SQL server as per process architecture of your machine. If it is 32 bit machine it will install 32 bit version  and for 64 bit it will install 64 bit version. installable has facility for both
    Even on 64 bit machines some files, which always work in 32 bit compatibilyt mode, will be installed as well andand they go to SQL server (X86) folder. BIDS, SSIS always by default works in 32 bit compatibility mode.
    If report says version as 11.2.5058 it means component is patched to SP2
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Installing GroupWise 2012 for the first time

    Hello,
    I am looking for some help on installing GroupWise 2012 for the first time, and onto a brand new Windows 2008 Server. I have looked at some of the documentation for this, but I do not fully understand what I need to do. For example, I need to have eDirectory installed so I installed eDirectory on the Windows sever. I don't know what settings I need to use for eDirectory or if I even need a Netware server, too. I would appreciate it if someone could walk me through this step by step and provide me with values for a basic system I would appreciate it. My first goal is to learn how to install GroupWise 2012 on a Windows 2008 server. Once I understand this, then I can redo it and go from there.
    Thank you for your help.
    John

    Hi John,
    Let me see if I can be of some sort of assistance.... you don't need a NetWare server - besides they are obsolete.
    I created the following set of instructions for somebody doing a first time install on Linux - perhaps just read around it and see if it works for you in a windows environment:
    "on the server run the GroupWise install: ./install from the directory where you have the software
    select "Create or Update a GroupWise System"
    accept the license agreement
    create the software distribution directory (default should be fine)
    From the Select Software dialog select the Select All button
    when the copying is complet select Creating a new GroupWise System
    to start ConsoleOne select Run
    when prompted with the Linux Mount Directory select OK
    when prompted, take note of the steps yout ake to create a new system, then select OK
    login to consoleone with your admin credentials
    in the left pane select GroupWise System the select Tools | GroupWise Utilities | New System
    select next
    confirm that your tree is correct
    select Extend eDirectory Schema check box and then select next
    When prompted for a system name enter something simple like GWise
    When prompted for a primary domain name enter a domain like gwdom1 (I'm keeping it generic in this scenario)
    when prompted for a domain directory enter a path ie /opt/novell/groupwise/dbs/gwdom1
    select next
    Next to the domain context fields select the browse icon
    browse to and select the container that will hold the domain (you might want to create an organisational unit called groupwise in your tree for this purpose)
    next slect your language and time zone
    when prompted for a post office name enter a poa name like gwpoa1 (again, generic in this example)
    when prompted for a post office directory enter a path eg /opt/novell/groupwise/dbs/gwpoa1
    the context for the post office is assumed to be the same as the domain
    select the language and time zone for the post office
    in the post office link dialog confirm that tcp/ip is selected
    enter your ip address of your server
    leave the ports at default - don't mess with these unless you know what you are doing!
    in the IP address of the MTA (that would be your domain) enter the IP of your server
    leave the ports at default
    browse and add existing edirectory users to your GroupWise system
    to create the GroupWise system select next
    view the installation summary then select next
    the final step is to install the agent software - select next
    from the GroupWise agents configuration dialog select next
    confirm that the check box for Launch GroupWise AGents on system startup is selected then select exit
    exit the GroupWise installation program
    from the terminal winodws enter rcgrpwise start to load the groupwise agents"
    Good luck
    Cheers,

  • Silent install of Exchange 2010 Mangement Tools (SP2)

    Hello,
    i am trying to create a silent install of Exchange 2010 Management tools.
    I created a batch-file :
    dism /online /enable-feature /featurename:IIS-WebServerRole
    dism /online /enable-feature /featurename:IIS-WebServerManagementTools
    dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
    dism /online /enable-feature /featurename:IIS-Metabase
    dism /online /enable-feature /featurename:IIS-LegacySnapIn
    "share\Exchange 2010\Exchange2010-SP2-x64\setup.com" /r:MT
    Problem is that this "MDT-application" needs to run as administrator (i tried to run the .bat-file, but it need administrator run).
    Howto do this in MDT?
    Problem 2: by the process of "copying files" the installation is stopped without error or message.
    Any other working options to install the Exchange Management Tools unattended by MDT?
    Thx

    There is an easier way:
    Under command line in your application settings, enter the setup.exe (not the batch file located on the network) with the appropriate parameters for silent install (http://technet.microsoft.com/en-us/library/aa997281(v=exchg.141).aspx).
    Under the working directory, put the network UNC path containing your source files.
    If you look in the task sequence you can add a new step (I typically add this under System Restore > Custom Tasks); under the category of Roles there is a "Install Roles and Features" step.
    You can then just check the boxes for each individual role and feature you wish to have installed. I typically make a couple of different task sequences for server installations and based upon their designated function when put into production. This
    process uses the servermanager process as opposed to using dism, so there is no requirement for changing account privileges, it just runs as administrator on the local machine.
    You then add a second step after the role configuration step to install an application (located under General). Change the radio button option to Install Single application and when the dialog for which application to add is shown, choose your Exchange Management
    Console application.
    Now it will run automated (as long as you specified all the appropriate prerequisites in the roles and features) and you eliminate the need to try to sort out batch files and privilege escalation, etc.

  • Server 2012 can't install 14 updates... Since January!!!

    I did a fresh install of Windows Server 2012 on a Intel 64 bit computer... a real one, not virtual.   I've done a reinstall from formatted disk three times so far.  In January I posted a message where I couldn't install two updates. 
    Now the number has climbed to 14!   It takes over an hour to boot because each update tries to install, fails, reverts all its files and then the next update starts and does the same thing. 
    Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB2817183)
    Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2789650)
    Security Update for Microsoft .NET Framework 4.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2789649)
    Security Update for Windows Server 2012 (KB2790655)
    Security Update for Windows Server 2012 (KB2807986)
    Security Update for Windows Server 2012 (KB2813170)
    Update for Windows Server 2012 (KB2756872)
    Update for Windows Server 2012 (KB2790907)
    Update for Windows Server 2012 (KB2795944)
    Update for Windows Server 2012 (KB2800033)
    Update for Windows Server 2012 (KB2811660)
    Update for Windows Server 2012 (KB2822241)
    Security Update for Windows Server 2012 (KB2790655)
    All fail with Error details: Code 800F0922
    I've ran everything I could find in this forum.  I cleared the c:\windows\SoftwareDistribution directory and ran the Windows update.  Same updates came down and failed installation.  So I cleared the c:\windows\SoftwareDistribution directory
    once again and ran the DISM commands (dism /online /cleanup-image /scanhealth and
    dism /online /cleanup-image /restorehealth) as administrator.  The first reported no errors and the second command said the system was repaired.  I ran Windows update again and the same updates were selected and failed installation.
    I've tried the dcomcnfg thing, setting the default authentication and impersonation levels and ran the 'windowsupdate.diagcab'(http://download.microsoft.com/download/6/C/9/6C970550-32AB-4235-9CDD-7FC9DD848BBB/windowsupdate.diagcab
    a ton of times.
    Server 2012... I'm at a loss for words.  Does anyone at Microsoft know what is going on here?

    Same issues
    2014-01-14 22:52:13:162 952 41c Misc =========== Logging initialized (build: 7.8.9200.16731, tz: -0500) ===========
    2014-01-14 22:52:13:225 952 41c Misc = Process: C:\Windows\system32\svchost.exe
    2014-01-14 22:52:13:225 952 41c Misc = Module: c:\windows\system32\wuaueng.dll
    2014-01-14 22:52:13:162 952 41c Service *************
    2014-01-14 22:52:13:225 952 41c Service ** START ** Service: Service startup
    2014-01-14 22:52:13:225 952 41c Service *********
    2014-01-14 22:52:14:113 952 41c Agent * WU client version 7.8.9200.16731
    2014-01-14 22:52:14:128 952 41c Agent * Base directory: C:\Windows\SoftwareDistribution
    2014-01-14 22:52:14:222 952 41c Agent * Access type: No proxy
    2014-01-14 22:52:14:285 952 41c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-01-14 22:52:14:285 952 41c Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-01-14 22:52:14:285 952 41c Agent * Network state: Connected
    2014-01-14 22:52:14:347 952 41c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-01-14 22:52:14:347 952 41c Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-01-14 22:52:16:079 952 41c Agent *********** Agent: Initializing global settings cache ***********
    2014-01-14 22:52:16:079 952 41c Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-01-14 22:52:16:079 952 41c Agent * WSUS server: <NULL>
    2014-01-14 22:52:16:079 952 41c Agent * WSUS status server: <NULL>
    2014-01-14 22:52:16:079 952 41c Agent * Target group: (Unassigned Computers)
    2014-01-14 22:52:16:079 952 41c Agent * Windows Update access disabled: No
    2014-01-14 22:52:16:110 952 41c Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    2014-01-14 22:52:16:985 952 41c WuTask WuTaskManager delay initialize completed successfully..
    2014-01-14 22:52:17:907 952 41c Report CWERReporter::Init succeeded
    2014-01-14 22:52:17:907 952 41c Agent *********** Agent: Initializing Windows Update Agent ***********
    2014-01-14 22:52:17:954 952 41c Agent * Found 11 persisted download calls to restore
    2014-01-14 22:52:18:220 952 41c DnldMgr Download manager restoring 11 downloads
    2014-01-14 22:52:18:579 952 41c DnldMgr Adding revision ID 201 for update B2821557-B02D-4866-A410-BECD746F1803 to the lock revision cache.
    2014-01-14 22:52:18:642 952 41c DnldMgr Adding revision ID 201 for update 6847B1A5-DC6C-4F59-A218-C537911BB2F1 to the lock revision cache.
    2014-01-14 22:52:18:657 952 41c DnldMgr Adding revision ID 202 for update 8D0A6E61-1CF5-476B-BF41-1EC352D432D0 to the lock revision cache.
    2014-01-14 22:52:18:782 952 41c DnldMgr Adding revision ID 202 for update 570C140E-5341-4EC9-8A00-B8F30C2A8777 to the lock revision cache.
    2014-01-14 22:52:18:798 952 41c DnldMgr Adding revision ID 200 for update 18DE5579-724C-41CB-88CA-AB3D9A6E23C3 to the lock revision cache.
    2014-01-14 22:52:18:798 952 41c DnldMgr Adding revision ID 200 for update CF7AF662-B0B5-4051-9860-EB42D43E9532 to the lock revision cache.
    2014-01-14 22:52:18:845 952 41c DnldMgr Adding revision ID 201 for update 9D133B7B-38A1-48FA-99BF-D63B94968EA9 to the lock revision cache.
    2014-01-14 22:52:18:845 952 41c DnldMgr Adding revision ID 201 for update 785B91DB-8C08-4732-BA26-D7139B1C6930 to the lock revision cache.
    2014-01-14 22:52:18:845 952 41c DnldMgr Adding revision ID 201 for update 4E5C9492-172D-4E96-B764-360C01CE541E to the lock revision cache.
    2014-01-14 22:52:18:845 952 41c DnldMgr Adding revision ID 201 for update 56A577A0-2607-4F68-BC26-F58FC7DE2C98 to the lock revision cache.
    2014-01-14 22:52:18:907 952 41c DnldMgr Adding revision ID 200 for update 0EDF04A2-2C17-4860-BBA1-4B42C5873CE2 to the lock revision cache.
    2014-01-14 22:52:18:907 952 41c DnldMgr Adding revision ID 200 for update C53063E3-CAE6-429F-AFC3-06CF665ED84F to the lock revision cache.
    2014-01-14 22:52:19:017 952 41c DnldMgr Adding revision ID 200 for update 6C49E0A2-4932-461E-A92B-D25DD12C870D to the lock revision cache.
    2014-01-14 22:52:19:017 952 41c DnldMgr Adding revision ID 200 for update 7EB3CDB3-34C7-48C6-9941-C45F57B17161 to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 200 for update 2EF26CC0-BCCB-4414-842A-7CCAAC38938D to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 200 for update D5B559CC-55F0-41DE-A78B-E02C0BA1F6B3 to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 200 for update 1E8951C1-7E3D-48D1-B3EB-610616FBCE90 to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 200 for update A0EAAC6D-5736-4B28-AC6E-B83838C0742A to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 201 for update 1C00D6CC-3F5C-40B8-93DE-7A40608ABB27 to the lock revision cache.
    2014-01-14 22:52:19:048 952 41c DnldMgr Adding revision ID 201 for update 45B058BE-041D-44B1-95A3-0BE3D413F837 to the lock revision cache.
    2014-01-14 22:52:19:063 952 41c DnldMgr Adding revision ID 203 for update CC538CCE-EE4C-4E32-9A21-0E7DEEFC6848 to the lock revision cache.
    2014-01-14 22:52:19:063 952 41c DnldMgr Adding revision ID 203 for update E3DEC02A-2A32-46EF-B38A-B3743937795B to the lock revision cache.
    2014-01-14 22:52:19:063 952 41c Agent * Successfully loaded 11 persisted download calls.
    2014-01-14 22:52:19:392 952 41c Agent Attempt 0 to obtain post-reboot results.
    2014-01-14 22:52:43:476 952 41c Handler Post-reboot status for session 30347684_3797504176: 0x00000000.
    2014-01-14 22:52:44:485 952 41c Report *********** Report: Initializing static reporting data ***********
    2014-01-14 22:52:44:485 952 41c Report * OS Version = 6.2.9200.0.0.131088
    2014-01-14 22:52:44:485 952 41c Report * OS Product Type = 0x00000007
    2014-01-14 22:52:44:788 952 41c Report * Computer Brand = ASUS
    2014-01-14 22:52:44:788 952 41c Report * Computer Model = All Series
    2014-01-14 22:52:44:788 952 41c Report * Platform Role = 1
    2014-01-14 22:52:44:788 952 41c Report * AlwaysOn/AlwaysConnected (AOAC) = 0
    2014-01-14 22:52:44:809 952 41c Report * Bios Revision = 1504
    2014-01-14 22:52:44:809 952 41c Report * Bios Name = 1504
    2014-01-14 22:52:44:809 952 41c Report * Bios Release Date = 2013-10-03T00:00:00
    2014-01-14 22:52:44:809 952 41c Report * Bios Sku Number = All
    2014-01-14 22:52:44:809 952 41c Report * Bios Vendor = American Megatrends Inc.
    2014-01-14 22:52:44:809 952 41c Report * Bios Family = ASUS MB
    2014-01-14 22:52:44:809 952 41c Report * Bios Major Release = 4
    2014-01-14 22:52:44:809 952 41c Report * Bios Minor Release = 6
    2014-01-14 22:52:44:809 952 41c Report * Locale ID = 1033
    2014-01-14 22:52:45:074 952 41c AU ########### AU: Initializing Automatic Updates ###########
    2014-01-14 22:52:45:074 952 41c AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
    2014-01-14 22:52:45:074 952 41c AU AIR Mode is disabled
    2014-01-14 22:52:45:312 952 41c AU # Approval type: Scheduled (User preference)
    2014-01-14 22:52:45:374 952 41c AU # Auto-install minor updates: Yes (User preference)
    2014-01-14 22:52:45:374 952 41c AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
    2014-01-14 22:52:45:374 952 41c AU # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-01-14 22:52:45:452 952 41c AU # Reconnecting download for 11 updates
    2014-01-14 22:52:45:468 952 41c AU # Reconnected 11 pending download calls
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:468 952 41c AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 22:52:45:546 952 41c AU AU finished delayed initialization
    2014-01-14 22:52:45:603 952 c68 DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {7971F918-A847-4430-9279-4A52D1EFE18D}] ***********
    2014-01-14 22:52:45:603 952 c68 DnldMgr Contacting regulation server for 11 updates.
    2014-01-14 22:52:45:619 952 41c AU #############
    2014-01-14 22:52:45:619 952 41c AU ## START ## AU: Search for updates
    2014-01-14 22:52:45:619 952 41c AU #########
    2014-01-14 22:52:45:619 952 41c AU <<## SUBMITTED ## AU: Search for updates [CallId = {BF5E5082-B875-4368-8F04-3BD94BE55F74} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 22:52:45:619 952 41c Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
    2014-01-14 22:52:45:619 952 41c AU <<## SUBMITTED ## AU: Search for updates [CallId = {75A342A4-B0FE-44E8-B8C0-32E8856DBCCE} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 22:52:46:244 952 c68 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab:
    2014-01-14 22:52:46:634 952 c70 Agent *************
    2014-01-14 22:52:46:634 952 c70 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 22:52:46:634 952 c70 Agent *********
    2014-01-14 22:52:46:634 952 c70 Agent * Online = No; Ignore download priority = No
    2014-01-14 22:52:46:634 952 c70 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-01-14 22:52:46:634 952 c70 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
    2014-01-14 22:52:46:634 952 c70 Agent * Search Scope = {Machine & All Users}
    2014-01-14 22:52:46:634 952 c70 Agent * Caller SID for Applicability: S-1-5-18
    2014-01-14 22:52:46:791 952 c68 Misc Microsoft signed: Yes
    2014-01-14 22:52:46:791 952 c68 Misc Infrastructure signed: Yes
    2014-01-14 22:52:47:385 952 c68 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-01-14 22:52:51:117 952 c68 PT WARNING: Cached cookie has expired or new PID is available
    2014-01-14 22:52:53:836 952 c68 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Regulation URL: "https://fe1.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
    2014-01-14 22:52:53:836 952 c68 DnldMgr Regulation server path: https://fe1.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Regulation call complete. 0x00000000
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {6847B1A5-DC6C-4F59-A218-C537911BB2F1}.201] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {570C140E-5341-4EC9-8A00-B8F30C2A8777}.202] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {CF7AF662-B0B5-4051-9860-EB42D43E9532}.200] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {785B91DB-8C08-4732-BA26-D7139B1C6930}.201] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {56A577A0-2607-4F68-BC26-F58FC7DE2C98}.201] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {C53063E3-CAE6-429F-AFC3-06CF665ED84F}.200] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {7EB3CDB3-34C7-48C6-9941-C45F57B17161}.200] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {D5B559CC-55F0-41DE-A78B-E02C0BA1F6B3}.200] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {A0EAAC6D-5736-4B28-AC6E-B83838C0742A}.200] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {45B058BE-041D-44B1-95A3-0BE3D413F837}.201] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:367 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {E3DEC02A-2A32-46EF-B38A-B3743937795B}.203] ***********
    2014-01-14 22:52:54:367 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:52:54:382 952 c6c AU AU checked download status and it changed: Downloading is paused
    2014-01-14 22:52:54:773 952 c68 Report REPORT EVENT: {8B38EC08-046E-4364-894E-868AF8D46B9E} 2014-01-14 22:52:45:074-0500 1 183 [AGENT_INSTALLING_SUCCEEDED] 101 {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows (KB2887069)
    2014-01-14 22:52:54:773 952 c68 Report REPORT EVENT: {6E8814BB-A7CA-4071-9838-C84DC9B8E23F} 2014-01-14 22:52:45:546-0500 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
    2014-01-14 22:52:54:773 952 c68 Report WARNING: Failed to get service object: 80248014
    2014-01-14 22:52:54:773 952 c68 Report WARNING: Failed to get service object: 80248014
    2014-01-14 22:52:54:773 952 c68 Report CWERReporter finishing event handling. (00000000)
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {8D0A6E61-1CF5-476B-BF41-1EC352D432D0}.202 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {9D133B7B-38A1-48FA-99BF-D63B94968EA9}.201 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {4E5C9492-172D-4E96-B764-360C01CE541E}.201 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {6C49E0A2-4932-461E-A92B-D25DD12C870D}.200 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {18DE5579-724C-41CB-88CA-AB3D9A6E23C3}.200 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {1E8951C1-7E3D-48D1-B3EB-610616FBCE90}.200 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {2EF26CC0-BCCB-4414-842A-7CCAAC38938D}.200 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {1C00D6CC-3F5C-40B8-93DE-7A40608ABB27}.201 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {0EDF04A2-2C17-4860-BBA1-4B42C5873CE2}.200 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Added update {CC538CCE-EE4C-4E32-9A21-0E7DEEFC6848}.203 to search result
    2014-01-14 22:56:19:198 952 c70 Agent * Found 10 updates and 67 categories in search; evaluated appl. rules of 1892 out of 3933 deployed entities
    2014-01-14 22:56:19:463 952 c70 Agent *********
    2014-01-14 22:56:19:463 952 c70 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 22:56:19:463 952 c70 Agent *************
    2014-01-14 22:56:19:463 952 c70 Agent *************
    2014-01-14 22:56:19:463 952 c70 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 22:56:19:463 952 c70 Agent *********
    2014-01-14 22:56:19:463 952 c70 Agent * Online = No; Ignore download priority = No
    2014-01-14 22:56:19:463 952 c70 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-01-14 22:56:19:463 952 c70 Agent * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
    2014-01-14 22:56:19:463 952 c70 Agent * Search Scope = {Machine & All Users}
    2014-01-14 22:56:19:463 952 c70 Agent * Caller SID for Applicability: S-1-5-18
    2014-01-14 22:56:19:463 952 c6c AU >>## RESUMED ## AU: Search for updates [CallId = {BF5E5082-B875-4368-8F04-3BD94BE55F74} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 22:56:19:463 952 c6c AU # 10 updates detected
    2014-01-14 22:56:19:463 952 c70 Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
    2014-01-14 22:56:19:463 952 c6c AU #########
    2014-01-14 22:56:19:463 952 c6c AU ## END ## AU: Search for updates [CallId = {BF5E5082-B875-4368-8F04-3BD94BE55F74} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 22:56:19:463 952 c6c AU #############
    2014-01-14 22:56:19:463 952 c70 Agent *********
    2014-01-14 22:56:19:463 952 c70 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 22:56:19:463 952 c70 Agent *************
    2014-01-14 22:56:19:541 952 c6c AU >>## RESUMED ## AU: Search for updates [CallId = {75A342A4-B0FE-44E8-B8C0-32E8856DBCCE} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 22:56:19:541 952 c6c AU # 0 updates detected
    2014-01-14 22:56:19:541 952 c6c AU #########
    2014-01-14 22:56:19:541 952 c6c AU ## END ## AU: Search for updates [CallId = {75A342A4-B0FE-44E8-B8C0-32E8856DBCCE} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 22:56:19:541 952 c6c AU #############
    2014-01-14 22:56:19:541 952 c6c AU All AU searches complete.
    2014-01-14 22:56:19:541 952 c6c DnldMgr WARNING: Cancelling update {6847B1A5-DC6C-4F59-A218-C537911BB2F1}
    2014-01-14 22:56:19:541 952 c6c AU Cancelled download for invalidated/hidden/unapplicable update(s)
    2014-01-14 22:56:19:557 952 c6c AU WARNING: Download callback received for call not in AU's list. Ignore the call result.
    2014-01-14 22:56:19:557 952 c6c AU WARNING: Download callback received for call not in AU's list. Ignore the call result.
    2014-01-14 22:56:24:542 952 c68 Report REPORT EVENT: {296982AB-2C4C-44A0-B912-161472DDB5C1} 2014-01-14 22:56:19:541-0500 1 163 [AGENT_DOWNLOAD_CANCELED] 101 {B2821557-B02D-4866-A410-BECD746F1803} 201 0 AutomaticUpdates Success Content Download Download canceled.
    2014-01-14 22:56:24:542 952 c68 Report CWERReporter finishing event handling. (00000000)
    2014-01-14 22:57:27:936 4504 1178 Misc =========== Logging initialized (build: 7.8.9200.16731, tz: -0500) ===========
    2014-01-14 22:57:27:936 4504 1178 Misc = Process: C:\Windows\system32\wusa.exe
    2014-01-14 22:57:27:936 4504 1178 Misc = Module: C:\Windows\System32\wuapi.dll
    2014-01-14 22:57:27:936 4504 1178 COMAPI ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
    2014-01-14 22:57:27:936 4504 1178 COMAPI - ServiceName = Windows Update Standalone Installer
    2014-01-14 22:57:27:936 4504 1178 COMAPI - ScanFileLocation = C:\0d65f2455c996cd5bc7c7699999d\wsusscan.cab
    2014-01-14 22:57:27:952 952 328 Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\23e0fa04-4f81-4c18-ac6e-66cf0117cd76\Source.cab:
    2014-01-14 22:57:27:952 952 328 Misc Microsoft signed: Yes
    2014-01-14 22:57:28:015 952 328 DtaStor Default service for AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
    2014-01-14 22:57:28:015 4504 1178 COMAPI - Added scan package service, ServiceID = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76} Third party service
    2014-01-14 22:57:28:015 4504 1178 COMAPI -------------
    2014-01-14 22:57:28:015 4504 1178 COMAPI -- START -- COMAPI: Init Search [ClientId = wusa]
    2014-01-14 22:57:28:015 4504 1178 COMAPI ---------
    2014-01-14 22:57:28:015 4504 1178 COMAPI -------------
    2014-01-14 22:57:28:015 4504 1178 COMAPI -- START -- COMAPI: Search [ClientId = wusa]
    2014-01-14 22:57:28:015 4504 1178 COMAPI ---------
    2014-01-14 22:57:28:015 952 c70 Agent *************
    2014-01-14 22:57:28:015 952 c70 Agent ** START ** Agent: Finding updates [CallerId = wusa]
    2014-01-14 22:57:28:015 952 c70 Agent *********
    2014-01-14 22:57:28:015 4504 1178 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = wusa]
    2014-01-14 22:57:28:015 952 c70 Agent * Online = Yes; Ignore download priority = No
    2014-01-14 22:57:28:015 952 c70 Agent * Criteria = "DeploymentAction='Installation'"
    2014-01-14 22:57:28:015 952 c70 Agent * ServiceID = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76} Third party service
    2014-01-14 22:57:28:015 952 c70 Agent * Search Scope = {Machine}
    2014-01-14 22:57:28:015 952 c70 Agent * Caller SID for Applicability: S-1-5-21-2191435260-2880925548-4224805289-1103
    2014-01-14 22:57:28:233 952 c70 PT +++++++++++ PT: Synchronizing server updates +++++++++++
    2014-01-14 22:57:28:233 952 c70 PT + Offline serviceId = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76}
    2014-01-14 22:57:28:233 952 c70 PT WARNING: Cached cookie has expired or new PID is available
    2014-01-14 22:57:29:077 952 c70 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
    2014-01-14 22:57:29:077 952 c70 PT + Offline serviceId = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76}
    2014-01-14 22:57:29:140 952 c70 Agent * Added update {5FCADF8F-7887-43B5-913F-D6E4E1C4FC8E}.501 to search result
    2014-01-14 22:57:29:155 952 c70 Agent * Found 1 updates and 52 categories in search; evaluated appl. rules of 115 out of 238 deployed entities
    2014-01-14 22:57:29:155 952 c70 Agent *********
    2014-01-14 22:57:29:155 952 c70 Agent ** END ** Agent: Finding updates [CallerId = wusa]
    2014-01-14 22:57:29:155 952 c70 Agent *************
    2014-01-14 22:57:29:155 4504 117c COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = wusa]
    2014-01-14 22:57:29:155 4504 117c COMAPI - Updates found = 1
    2014-01-14 22:57:29:155 4504 117c COMAPI ---------
    2014-01-14 22:57:29:155 4504 117c COMAPI -- END -- COMAPI: Search [ClientId = wusa]
    2014-01-14 22:57:29:155 4504 117c COMAPI -------------
    2014-01-14 22:57:30:780 952 328 DnldMgr *********** DnldMgr: Copy update to cache [UpdateId = {BBD2E08C-7236-42C8-B341-1891D83D5B72}.501] ***********
    2014-01-14 22:57:30:780 952 328 DnldMgr No locked revisions found for update BBD2E08C-7236-42C8-B341-1891D83D5B72; locking the user-specified revision.
    2014-01-14 22:57:30:780 952 328 DnldMgr Adding revision ID 501 for update BBD2E08C-7236-42C8-B341-1891D83D5B72 to the lock revision cache.
    2014-01-14 22:57:30:780 952 328 DnldMgr Asking handler to generate non-range requests.
    2014-01-14 22:57:30:780 952 328 Handler Generating request for CBS update BBD2E08C-7236-42C8-B341-1891D83D5B72 in sandbox C:\Windows\SoftwareDistribution\Download\20627b113e0634d7b51f54dc2cedb3f0_ctc
    2014-01-14 22:57:30:780 952 328 Handler Selecting self-contained because update does not have express payload.
    2014-01-14 22:57:30:780 952 328 Handler Selected payload type is ptSelfContained
    2014-01-14 22:57:30:780 952 328 Handler Detected download state is dsStart
    2014-01-14 22:57:30:780 952 328 Handler Adding windows8-rt-kb2893294-x64.cab (entire file) to request list.
    2014-01-14 22:57:30:796 952 328 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    2014-01-14 22:57:30:796 952 328 Misc Validating signature for C:\Windows\SoftwareDistribution\Download\20627b113e0634d7b51f54dc2cedb3f0_ctc\windows8-rt-kb2893294-x64.cab:
    2014-01-14 22:57:30:812 952 328 Misc Microsoft signed: Yes
    2014-01-14 22:57:30:812 952 328 DnldMgr Asking handler to generate non-range requests.
    2014-01-14 22:57:30:812 952 328 Handler Generating request for CBS update BBD2E08C-7236-42C8-B341-1891D83D5B72 in sandbox C:\Windows\SoftwareDistribution\Download\20627b113e0634d7b51f54dc2cedb3f0_ctc
    2014-01-14 22:57:30:812 952 328 Handler Selecting self-contained because update does not have express payload.
    2014-01-14 22:57:30:812 952 328 Handler Selected payload type is ptSelfContained
    2014-01-14 22:57:30:812 952 328 Handler Detected download state is dsHavePackage
    2014-01-14 22:57:30:827 952 328 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    2014-01-14 22:57:30:937 4504 1178 COMAPI -------------
    2014-01-14 22:57:30:937 4504 1178 COMAPI -- START -- COMAPI: Install [ClientId = wusa]
    2014-01-14 22:57:30:937 4504 1178 COMAPI ---------
    2014-01-14 22:57:30:937 4504 1178 COMAPI - Allow source prompts: Yes; Forced: No; Force quiet: No; Attempt close apps if necessary: No
    2014-01-14 22:57:30:937 4504 1178 COMAPI - Updates in request: 1
    2014-01-14 22:57:30:937 4504 1178 COMAPI - ServiceID = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76} Third party service
    2014-01-14 22:57:30:952 952 328 Agent Beginning install of conventional work item
    2014-01-14 22:57:30:952 952 11d4 Agent *************
    2014-01-14 22:57:30:952 952 11d4 Agent ** START ** Agent: Installing updates [CallerId = wusa]
    2014-01-14 22:57:30:952 952 11d4 Agent *********
    2014-01-14 22:57:30:952 4504 1178 COMAPI - Updates to install = 1
    2014-01-14 22:57:30:952 952 11d4 Agent * Updates to install = 1
    2014-01-14 22:57:30:952 4504 1178 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = wusa]
    2014-01-14 22:57:30:952 952 11d4 Agent * Title = Security Update for Windows (KB2893294)
    2014-01-14 22:57:30:952 952 11d4 Agent * UpdateId = {5FCADF8F-7887-43B5-913F-D6E4E1C4FC8E}.501
    2014-01-14 22:57:30:952 952 11d4 Agent * Bundles 1 updates:
    2014-01-14 22:57:30:952 952 11d4 Agent * {BBD2E08C-7236-42C8-B341-1891D83D5B72}.501
    2014-01-14 22:57:30:968 952 11d4 Handler Attempting to create remote handler process as ALLIANCE\Louis in session 1
    2014-01-14 22:57:30:999 952 11d4 DnldMgr Preparing update for install, updateId = {BBD2E08C-7236-42C8-B341-1891D83D5B72}.501.
    2014-01-14 22:57:30:999 4588 11d8 Misc =========== Logging initialized (build: 7.8.9200.16731, tz: -0500) ===========
    2014-01-14 22:57:30:999 4588 11d8 Misc = Process: C:\Windows\system32\wuauclt.exe
    2014-01-14 22:57:30:999 4588 11d8 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
    2014-01-14 22:57:30:999 4588 11d8 Handler :::::::::::::
    2014-01-14 22:57:30:999 4588 11d8 Handler :: START :: Handler: CBS Install
    2014-01-14 22:57:30:999 4588 11d8 Handler :::::::::
    2014-01-14 22:57:30:999 4588 11d8 Handler Starting install of CBS update BBD2E08C-7236-42C8-B341-1891D83D5B72
    2014-01-14 22:57:30:999 4588 11d8 Handler CBS session identity: 30347685_3925685275
    2014-01-14 22:57:31:015 4588 11d8 Handler CBS package identity: Package_for_KB2893294~31bf3856ad364e35~amd64~~6.2.1.1
    2014-01-14 22:57:31:015 4588 11d8 Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\20627b113e0634d7b51f54dc2cedb3f0\windows8-rt-kb2893294-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\20627b113e0634d7b51f54dc2cedb3f0\inst
    2014-01-14 22:57:38:343 4588 11d8 Handler Requesting post-reboot reporting for package Package_for_KB2893294~31bf3856ad364e35~amd64~~6.2.1.1.
    2014-01-14 22:57:38:343 4588 11d8 Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    2014-01-14 22:57:38:390 4588 11d8 Handler :::::::::
    2014-01-14 22:57:38:390 4588 11d8 Handler :: END :: Handler: CBS Install
    2014-01-14 22:57:38:390 4588 11d8 Handler :::::::::::::
    2014-01-14 22:57:38:405 952 11d4 AU Preventing expiration of polled reporting events until next restart
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {570C140E-5341-4EC9-8A00-B8F30C2A8777}.202] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {CF7AF662-B0B5-4051-9860-EB42D43E9532}.200] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {785B91DB-8C08-4732-BA26-D7139B1C6930}.201] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {56A577A0-2607-4F68-BC26-F58FC7DE2C98}.201] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {C53063E3-CAE6-429F-AFC3-06CF665ED84F}.200] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {7EB3CDB3-34C7-48C6-9941-C45F57B17161}.200] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {D5B559CC-55F0-41DE-A78B-E02C0BA1F6B3}.200] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {A0EAAC6D-5736-4B28-AC6E-B83838C0742A}.200] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {45B058BE-041D-44B1-95A3-0BE3D413F837}.201] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 c68 DnldMgr *********** DnldMgr: New download job [UpdateId = {E3DEC02A-2A32-46EF-B38A-B3743937795B}.203] ***********
    2014-01-14 22:57:38:405 952 c68 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 22:57:38:405 952 11d4 Agent *********
    2014-01-14 22:57:38:405 952 11d4 Agent ** END ** Agent: Installing updates [CallerId = wusa]
    2014-01-14 22:57:38:405 952 11d4 Agent *************
    2014-01-14 22:57:38:405 4504 117c COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = wusa]
    2014-01-14 22:57:38:405 4504 117c COMAPI - Install call complete (succeeded = 1, succeeded with errors = 0, failed = 0, unaccounted = 0)
    2014-01-14 22:57:38:405 4504 117c COMAPI - Reboot required = Yes
    2014-01-14 22:57:38:405 4504 117c COMAPI ---------
    2014-01-14 22:57:38:405 4504 117c COMAPI -- END -- COMAPI: Install [ClientId = wusa]
    2014-01-14 22:57:38:405 4504 117c COMAPI -------------
    2014-01-14 22:57:41:312 4504 1178 COMAPI Installation wizard (API) invoking RebootSystem
    2014-01-14 22:57:41:312 4504 1178 AU Allowing auto firmware installs at next shutdown
    2014-01-14 22:57:41:343 4504 1178 Misc WARNING: SUS Client is rebooting system.
    2014-01-14 22:57:41:343 4504 1178 COMAPI ----------- COMAPI: IUpdateServiceManager::RemoveService -----------
    2014-01-14 22:57:41:343 4504 1178 COMAPI - ServiceId = {23e0fa04-4f81-4c18-ac6e-66cf0117cd76}
    2014-01-14 22:57:41:390 4504 1178 COMAPI IUpdateService removing volatile scan package service, serviceID = {23E0FA04-4F81-4C18-AC6E-66CF0117CD76}
    2014-01-14 22:57:41:390 952 f64 Agent WARNING: WU client fails CClientCallRecorder::RemoveService with error 0x80248014
    2014-01-14 22:57:41:390 4504 1178 COMAPI WARNING: ISusInternal::RemoveService failed, hr=80248014
    2014-01-14 22:57:43:418 952 c68 Report REPORT EVENT: {F6323A03-6118-4126-97F5-93FA21AAC901} 2014-01-14 22:57:38:405-0500 1 201 [AGENT_INSTALLING_PENDING] 101 {5FCADF8F-7887-43B5-913F-D6E4E1C4FC8E} 501 240005 wusa Success Content Install Installation pending.
    2014-01-14 22:57:43:418 952 c68 Report CWERReporter finishing event handling. (00000000)
    2014-01-14 22:57:47:762 952 41c Shutdwn Checking to see whether install at shutdown is appropriate
    2014-01-14 22:57:47:762 952 41c Shutdwn user declined update at shutdown
    2014-01-14 22:57:47:762 952 41c Shutdwn Scheduled installs enabled; treating update at shutdown as approved to install auto firmware
    2014-01-14 22:57:47:762 952 41c AU AU found 0 updates to install at shutdown.
    2014-01-14 22:57:47:762 952 41c AU AU initiates service shutdown
    2014-01-14 22:57:47:762 952 41c AU ########### AU: Uninitializing Automatic Updates ###########
    2014-01-14 22:57:47:762 952 41c WuTask Uninit WU Task Manager
    2014-01-14 22:57:48:090 952 41c Report CWERReporter finishing event handling. (00000000)
    2014-01-14 22:57:48:856 952 41c Service *********
    2014-01-14 22:57:48:856 952 41c Service ** END ** Service: Service exit [Exit code = 0x240001]
    2014-01-14 22:57:48:856 952 41c Service *************
    2014-01-14 22:59:34:543 956 7dc Misc =========== Logging initialized (build: 7.8.9200.16731, tz: -0500) ===========
    2014-01-14 22:59:34:574 956 7dc Misc = Process: C:\Windows\system32\svchost.exe
    2014-01-14 22:59:34:574 956 7dc Misc = Module: c:\windows\system32\wuaueng.dll
    2014-01-14 22:59:34:543 956 7dc Service *************
    2014-01-14 22:59:34:574 956 7dc Service ** START ** Service: Service startup
    2014-01-14 22:59:34:574 956 7dc Service *********
    2014-01-14 22:59:36:124 956 7dc Agent * WU client version 7.8.9200.16731
    2014-01-14 22:59:36:186 956 7dc Agent * Base directory: C:\Windows\SoftwareDistribution
    2014-01-14 22:59:36:264 956 7dc Agent * Access type: No proxy
    2014-01-14 22:59:36:295 956 7dc Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-01-14 22:59:36:295 956 7dc Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-01-14 22:59:36:295 956 7dc Agent * Network state: Connected
    2014-01-14 22:59:36:483 956 7dc Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-01-14 22:59:36:483 956 7dc Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-01-14 22:59:37:577 956 7dc Agent *********** Agent: Initializing global settings cache ***********
    2014-01-14 22:59:37:577 956 7dc Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-01-14 22:59:37:577 956 7dc Agent * WSUS server: <NULL>
    2014-01-14 22:59:37:577 956 7dc Agent * WSUS status server: <NULL>
    2014-01-14 22:59:37:577 956 7dc Agent * Target group: (Unassigned Computers)
    2014-01-14 22:59:37:577 956 7dc Agent * Windows Update access disabled: No
    2014-01-14 22:59:37:608 956 7dc Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    2014-01-14 22:59:37:999 956 7dc WuTask WuTaskManager delay initialize completed successfully..
    2014-01-14 22:59:38:438 956 7dc Report CWERReporter::Init succeeded
    2014-01-14 22:59:38:438 956 7dc Agent *********** Agent: Initializing Windows Update Agent ***********
    2014-01-14 22:59:38:453 956 7dc Agent * Found 10 persisted download calls to restore
    2014-01-14 22:59:38:846 956 7dc DnldMgr Download manager restoring 10 downloads
    2014-01-14 22:59:39:049 956 7dc DnldMgr Adding revision ID 202 for update 8D0A6E61-1CF5-476B-BF41-1EC352D432D0 to the lock revision cache.
    2014-01-14 22:59:39:081 956 7dc DnldMgr Adding revision ID 202 for update 570C140E-5341-4EC9-8A00-B8F30C2A8777 to the lock revision cache.
    2014-01-14 22:59:39:081 956 7dc DnldMgr Adding revision ID 200 for update 18DE5579-724C-41CB-88CA-AB3D9A6E23C3 to the lock revision cache.
    2014-01-14 22:59:39:081 956 7dc DnldMgr Adding revision ID 200 for update CF7AF662-B0B5-4051-9860-EB42D43E9532 to the lock revision cache.
    2014-01-14 22:59:39:081 956 7dc DnldMgr Adding revision ID 201 for update 9D133B7B-38A1-48FA-99BF-D63B94968EA9 to the lock revision cache.
    2014-01-14 22:59:39:081 956 7dc DnldMgr Adding revision ID 201 for update 785B91DB-8C08-4732-BA26-D7139B1C6930 to the lock revision cache.
    2014-01-14 22:59:39:096 956 7dc DnldMgr Adding revision ID 201 for update 4E5C9492-172D-4E96-B764-360C01CE541E to the lock revision cache.
    2014-01-14 22:59:39:096 956 7dc DnldMgr Adding revision ID 201 for update 56A577A0-2607-4F68-BC26-F58FC7DE2C98 to the lock revision cache.
    2014-01-14 22:59:39:143 956 7dc DnldMgr Adding revision ID 200 for update 0EDF04A2-2C17-4860-BBA1-4B42C5873CE2 to the lock revision cache.
    2014-01-14 22:59:39:143 956 7dc DnldMgr Adding revision ID 200 for update C53063E3-CAE6-429F-AFC3-06CF665ED84F to the lock revision cache.
    2014-01-14 22:59:39:143 956 7dc DnldMgr Adding revision ID 200 for update 6C49E0A2-4932-461E-A92B-D25DD12C870D to the lock revision cache.
    2014-01-14 22:59:39:206 956 7dc DnldMgr Adding revision ID 200 for update 7EB3CDB3-34C7-48C6-9941-C45F57B17161 to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 200 for update 2EF26CC0-BCCB-4414-842A-7CCAAC38938D to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 200 for update D5B559CC-55F0-41DE-A78B-E02C0BA1F6B3 to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 200 for update 1E8951C1-7E3D-48D1-B3EB-610616FBCE90 to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 200 for update A0EAAC6D-5736-4B28-AC6E-B83838C0742A to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 201 for update 1C00D6CC-3F5C-40B8-93DE-7A40608ABB27 to the lock revision cache.
    2014-01-14 22:59:39:221 956 7dc DnldMgr Adding revision ID 201 for update 45B058BE-041D-44B1-95A3-0BE3D413F837 to the lock revision cache.
    2014-01-14 22:59:39:237 956 7dc DnldMgr Adding revision ID 203 for update CC538CCE-EE4C-4E32-9A21-0E7DEEFC6848 to the lock revision cache.
    2014-01-14 22:59:39:237 956 7dc DnldMgr Adding revision ID 203 for update E3DEC02A-2A32-46EF-B38A-B3743937795B to the lock revision cache.
    2014-01-14 22:59:39:237 956 7dc Agent * Successfully loaded 10 persisted download calls.
    2014-01-14 22:59:39:440 956 7dc Agent Attempt 0 to obtain post-reboot results.
    2014-01-14 23:00:22:440 956 7dc Handler Post-reboot status for session 30347685_3925685275: 0x00000000.
    2014-01-14 23:00:23:846 956 7dc Report *********** Report: Initializing static reporting data ***********
    2014-01-14 23:00:23:846 956 7dc Report * OS Version = 6.2.9200.0.0.131088
    2014-01-14 23:00:23:846 956 7dc Report * OS Product Type = 0x00000007
    2014-01-14 23:00:24:065 956 7dc Report * Computer Brand = ASUS
    2014-01-14 23:00:24:065 956 7dc Report * Computer Model = All Series
    2014-01-14 23:00:24:065 956 7dc Report * Platform Role = 1
    2014-01-14 23:00:24:065 956 7dc Report * AlwaysOn/AlwaysConnected (AOAC) = 0
    2014-01-14 23:00:24:143 956 7dc Report * Bios Revision = 1504
    2014-01-14 23:00:24:143 956 7dc Report * Bios Name = 1504
    2014-01-14 23:00:24:143 956 7dc Report * Bios Release Date = 2013-10-03T00:00:00
    2014-01-14 23:00:24:143 956 7dc Report * Bios Sku Number = All
    2014-01-14 23:00:24:143 956 7dc Report * Bios Vendor = American Megatrends Inc.
    2014-01-14 23:00:24:143 956 7dc Report * Bios Family = ASUS MB
    2014-01-14 23:00:24:143 956 7dc Report * Bios Major Release = 4
    2014-01-14 23:00:24:143 956 7dc Report * Bios Minor Release = 6
    2014-01-14 23:00:24:143 956 7dc Report * Locale ID = 1033
    2014-01-14 23:00:24:315 956 7dc AU ########### AU: Initializing Automatic Updates ###########
    2014-01-14 23:00:24:315 956 7dc AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
    2014-01-14 23:00:24:315 956 7dc AU AIR Mode is disabled
    2014-01-14 23:00:24:377 956 7dc AU # Approval type: Scheduled (User preference)
    2014-01-14 23:00:24:408 956 7dc AU # Auto-install minor updates: Yes (User preference)
    2014-01-14 23:00:24:408 956 7dc AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
    2014-01-14 23:00:24:408 956 7dc AU # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-01-14 23:00:24:424 956 7dc AU # Reconnecting download for 10 updates
    2014-01-14 23:00:24:424 956 7dc AU # Reconnected 10 pending download calls
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:424 956 7dc AU WARNING: Failed to change download properties of call, error = 0x80070057
    2014-01-14 23:00:24:455 956 7dc AU AU finished delayed initialization
    2014-01-14 23:00:24:518 956 c44 DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {7971F918-A847-4430-9279-4A52D1EFE18D}] ***********
    2014-01-14 23:00:24:518 956 c44 DnldMgr Contacting regulation server for 10 updates.
    2014-01-14 23:00:24:783 956 7dc AU #############
    2014-01-14 23:00:24:783 956 7dc AU ## START ## AU: Search for updates
    2014-01-14 23:00:24:783 956 7dc AU #########
    2014-01-14 23:00:24:783 956 7dc AU <<## SUBMITTED ## AU: Search for updates [CallId = {51834566-3665-41D0-BC08-6C905A40BDF3} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 23:00:24:783 956 7dc Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
    2014-01-14 23:00:24:783 956 7dc AU <<## SUBMITTED ## AU: Search for updates [CallId = {6210140C-5720-45EB-A7A6-8DF22ACE450E} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 23:00:25:158 956 c44 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab:
    2014-01-14 23:00:25:799 956 c4c Agent *************
    2014-01-14 23:00:25:799 956 c4c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 23:00:25:799 956 c4c Agent *********
    2014-01-14 23:00:25:799 956 c4c Agent * Online = No; Ignore download priority = No
    2014-01-14 23:00:25:799 956 c4c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-01-14 23:00:25:799 956 c4c Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
    2014-01-14 23:00:25:799 956 c4c Agent * Search Scope = {Machine & All Users}
    2014-01-14 23:00:25:799 956 c4c Agent * Caller SID for Applicability: S-1-5-18
    2014-01-14 23:00:26:471 956 c44 Misc Microsoft signed: Yes
    2014-01-14 23:00:26:471 956 c44 Misc Infrastructure signed: Yes
    2014-01-14 23:00:26:768 956 c44 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-01-14 23:00:29:274 956 c44 PT WARNING: Cached cookie has expired or new PID is available
    2014-01-14 23:00:35:087 956 c44 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Regulation URL: "https://fe1.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
    2014-01-14 23:00:35:087 956 c44 DnldMgr Regulation server path: https://fe1.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Regulation call complete. 0x00000000
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {570C140E-5341-4EC9-8A00-B8F30C2A8777}.202] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {CF7AF662-B0B5-4051-9860-EB42D43E9532}.200] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {785B91DB-8C08-4732-BA26-D7139B1C6930}.201] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {56A577A0-2607-4F68-BC26-F58FC7DE2C98}.201] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {C53063E3-CAE6-429F-AFC3-06CF665ED84F}.200] ***********
    2014-01-14 23:00:35:602 956 c48 AU AU checked download status and it changed: Downloading is paused
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {7EB3CDB3-34C7-48C6-9941-C45F57B17161}.200] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {D5B559CC-55F0-41DE-A78B-E02C0BA1F6B3}.200] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {A0EAAC6D-5736-4B28-AC6E-B83838C0742A}.200] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {45B058BE-041D-44B1-95A3-0BE3D413F837}.201] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:35:602 956 c44 DnldMgr *********** DnldMgr: New download job [UpdateId = {E3DEC02A-2A32-46EF-B38A-B3743937795B}.203] ***********
    2014-01-14 23:00:35:602 956 c44 DnldMgr * Update is not allowed to download due to service regulation or download size limitation.
    2014-01-14 23:00:36:149 956 c44 Report REPORT EVENT: {B51A6E3A-E882-4483-958B-BF7170BB8F84} 2014-01-14 23:00:24:315-0500 1 183 [AGENT_INSTALLING_SUCCEEDED] 101 {5FCADF8F-7887-43B5-913F-D6E4E1C4FC8E} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows (KB2893294)
    2014-01-14 23:00:36:149 956 c44 Report REPORT EVENT: {A6AA5B28-4E81-40EE-808A-61094026571B} 2014-01-14 23:00:24:455-0500 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
    2014-01-14 23:00:36:149 956 c44 Report WARNING: Failed to get service object: 80248014
    2014-01-14 23:00:36:149 956 c44 Report WARNING: Failed to get service object: 80248014
    2014-01-14 23:00:36:149 956 c44 Report CWERReporter finishing event handling. (00000000)
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {9D133B7B-38A1-48FA-99BF-D63B94968EA9}.201 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {4E5C9492-172D-4E96-B764-360C01CE541E}.201 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {6C49E0A2-4932-461E-A92B-D25DD12C870D}.200 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {18DE5579-724C-41CB-88CA-AB3D9A6E23C3}.200 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {1E8951C1-7E3D-48D1-B3EB-610616FBCE90}.200 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {2EF26CC0-BCCB-4414-842A-7CCAAC38938D}.200 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {1C00D6CC-3F5C-40B8-93DE-7A40608ABB27}.201 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {0EDF04A2-2C17-4860-BBA1-4B42C5873CE2}.200 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Added update {CC538CCE-EE4C-4E32-9A21-0E7DEEFC6848}.203 to search result
    2014-01-14 23:04:14:753 956 c4c Agent * Found 9 updates and 67 categories in search; evaluated appl. rules of 1892 out of 3933 deployed entities
    2014-01-14 23:04:14:800 956 c4c Agent *********
    2014-01-14 23:04:14:800 956 c4c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 23:04:14:800 956 c4c Agent *************
    2014-01-14 23:04:14:800 956 c4c Agent *************
    2014-01-14 23:04:14:800 956 c4c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 23:04:14:800 956 c4c Agent *********
    2014-01-14 23:04:14:800 956 c4c Agent * Online = No; Ignore download priority = No
    2014-01-14 23:04:14:800 956 c4c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-01-14 23:04:14:800 956 c4c Agent * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
    2014-01-14 23:04:14:800 956 c4c Agent * Search Scope = {Machine & All Users}
    2014-01-14 23:04:14:800 956 c4c Agent * Caller SID for Applicability: S-1-5-18
    2014-01-14 23:04:14:800 956 c48 AU >>## RESUMED ## AU: Search for updates [CallId = {51834566-3665-41D0-BC08-6C905A40BDF3} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 23:04:14:800 956 c48 AU # 9 updates detected
    2014-01-14 23:04:14:800 956 c48 AU #########
    2014-01-14 23:04:14:800 956 c4c Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
    2014-01-14 23:04:14:800 956 c48 AU ## END ## AU: Search for updates [CallId = {51834566-3665-41D0-BC08-6C905A40BDF3} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-01-14 23:04:14:800 956 c48 AU #############
    2014-01-14 23:04:14:800 956 c4c Agent *********
    2014-01-14 23:04:14:800 956 c4c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-01-14 23:04:14:800 956 c4c Agent *************
    2014-01-14 23:04:14:878 956 c48 AU >>## RESUMED ## AU: Search for updates [CallId = {6210140C-5720-45EB-A7A6-8DF22ACE450E} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 23:04:14:878 956 c48 AU # 0 updates detected
    2014-01-14 23:04:14:878 956 c48 AU #########
    2014-01-14 23:04:14:878 956 c48 AU ## END ## AU: Search for updates [CallId = {6210140C-5720-45EB-A7A6-8DF22ACE450E} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    2014-01-14 23:04:14:878 956 c48 AU #############
    2014-01-14 23:04:14:878 956 c48 AU All AU searches complete.
    2014-01-14 23:04:14:894 956 c48 DnldMgr WARNING: Cancelling update {570C140E-5341-4EC9-8A00-B8F30C2A8777}
    2014-01-14 23:04:14:894 956 c48 AU Cancelled download for invalidated/hidden/unapplicable update(s)
    2014-01-14 23:04:14:910 956 c48 AU WARNING: Download callback received for call not in AU's list. Ignore the call result.
    2014-01-14 23:04:14:910 956 c48 AU WARNING: Download callback received for call not in AU's list. Ignore the call result.
    2014-01-14 23:04:19:894 956 c44 Report REPORT EVENT: {0AF6CB8F-D7EF-4910-B4C9-1876C48B61F6} 2014-01-14 23:04:14:894-0500 1 163 [AGENT_DOWNLOAD_CANCELED] 101 {8D0A6E61-1CF5-476B-BF41-1EC352D432D0} 202 0 AutomaticUpdates Success Content Download Download canceled.
    2014-01-14 23:04:19:894 956 c44 Report CWERReporter finishing event handling. (00000000)

Maybe you are looking for

  • Help.  Suddenly unable to sync my ipod classic

    Help! i-tunes no longer recognises my i-pod classic.  As soon as I connect my i-pod, i-tunes freezes.  And when I unplug it I get one of two messages 'The ipod (name) cannot be synched.  the required file cannot be found' or 'The ipod (name) cannot b

  • Are Sky telling me the truth

    I have been waiting for almost a month for my fibre broadband to be connected.  Sky are telling me that it is due to a capacity issue at my exchange, fair enough, but that it is Openreach who seem to be dragging their feet to resolve the issue.  My l

  • Iframe is completed?

    Hi; I'm prepared, banner-one.html Adobe Edge animation, add the main.html in the iframe. if complete() is banner-one.html animation I want run to function bannedEnded(); in the main.html. //main.html <DOCTYPE html> <html>     <head>         <meta htt

  • I cannot audio or video on my mac please help!!

    Here is the error i really wanna fix this.... i have a core duo black mac book with 2gb of ram Date/Time: 2008-01-02 01:26:01.442 -0800 OS Version: 10.5.1 (Build 9B18) Report Version: 4 iChat Connection Log: 2008-01-02 01:25:37 -0800: AVChat started

  • Required Plant maintenance configuration document and user manual.

    HI PM consultant guruu2019s Could you please provide any PM implementation configuration document and user manual. If any link for the above, please provide and it should be free download link. Thanks and Regards JRP