Groupwise 2012 stops sending transferring to Gwava 3rd Send
I had issues with Groupwise 2012 orginally that the gwia would come up "dead", so what I did was setup a cron job to down groupwise and start it up at 6:30 am and at 6:45 to do the same with Gwava 6. The email works fine for a couple days, then it stops transferring the emails from the gwia/send directory to the gwia/3rd/send. I have to restart the gwia so it will start sending again. This really has been annoying and I have had to be checking up on the gwia every day... The groupwise 2012 is on a SLES 11 SP1 GM and installed on a new server..
Setup the cron job for both gwia and gwava to reload at 6:30 a couple months ago, but till have the issue. Since we made some changes in gwava we are waiting to see, looks like it might of been the gwava..
Originally Posted by dzanre
crobison wrote:
> I have to restart the
> gwia so it will start sending again. This really has been annoying and I have
> had to be checking up on the gwia every day...
In the meantime, while a solution is being searched for, you could simply enable
a cron job to restart the GWIA daily, every 12 hours, whatever you think it
needs to keep things going.
Danita
Novell Knowledge Partner
Time to upgrade to GW 2012!
http://www.caledonia.net/upgrade
http://www.facebook.com/caledonia.net
Similar Messages
-
How to stop sending reminders/expeditors after 3rd reminder sent?
Dear Experts,
We have a requirement to stop sending expeditors to vendors after 3rd expeditor is sent.
I have 1st, 2nd , 3rd reminders set as 1, 3 and 5 (Comes from PIR)
How to achive this?
Also, once, 3rd reminder is sent on 5th day, there after every 5 days, a reminder will be sent (through a batch job)
Why is this so? what configuration can change this?
regards,
Shettythe batch job executes the program of transaction ME91F to generate a reminder.
It checks the 3. level reminder days for any reminder above the 3rd level.
as you have set the 5th day for the 3rd level reminder, SAP will generate the next reminder 5 days later e.g. on the 10th, then on the 15th , on the 20th etc. until your order is delivery completed -
GroupWise 2012 Deployment Bundle Issue - Not Installing
Hello There,
I have an issue to deploy the GroupWise 2012 client via Zen 11.1 (Had no prob to deploy GroupWise 8)
I followed the well-done tutorial from youtube (Novell GroupWise 2012 Deployed Using ZCM 11 SP1 Part 1 - YouTube) or/and the guide (http://www.novell.com/feeds/nih/wp-c...5/GW06_lab.pdf) but it seems that it does not want to work as shown. I googled to see if anyone had the same prob but it seems not to be the case. So I assume I missed something but I do not find the trick.
Everything works until it launches the install.bat as when I get the notification that it has completed the installation the only thing I see is that no GroupWise 2012 is installed at all and that GroupWise 8 has been uninstalled. During the process I see that it copies the first 800 files in Program Files\novell\groupwise but just before telling me that he finished all files are removed. I did not do the step where it should launch GroupWise.
I re-created a bundles and tried to install GroupWise 2012 as GroupWise 8 but it did not work.
It is really frustrating as I really need it to be deployed and that it was meant to be simple.
I would be grateful if anyone could help on that.
Thank you in advance,
OAKFND
PS: Here is a part of the log on the workstation
[DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] [] [LaunchActionHandler] [] [Exiting ProcessAction] [] []
[DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Action handler Launch Action finished processing Launch GroupWise Installation successfully.] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Caching action set 5c2142000453e9b1159e677b04577dd9] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionSet count: 7] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionResult count: 6] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
[DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
[DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
[DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\3b17bbd3-f015-4c92-a7e0-c337a893ab0f in 10 ms] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Processing action: Delete GroupWise2012 Directory] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Caching action set 5c2142000453e9b1159e677b04577dd9] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
[DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionSet count: 7] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ ActionResult count: 7] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 5 ms] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
[DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\d4bb83fe-6151-42fe-9656-c2c35f55c0d2 in 9 ms] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Updating status for set 4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [Work set completed. Deleting cached action set 5c2142000453e9b1159e677b04577dd9] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [Deleting work set GroupWise 2012 Installation or Upgrade (INSTALL)] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [WorkSet] [] [WorkSet using session id (ZenName): b683416a643739f118900002b3dfe2fa] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99, UserContext{_LocalId=SYSTEM; _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManUtil] [] [DestroyDauSession countdown reset to 500000 milliseconds for session 6088812] [] []
[DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9] [] [ActionManager] [] [GetResultSetRequest returning DO_NOTHING] [] []
[DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [Status Library] [] [SetStatus: srchSql= select successcount, failurecount from zstatus where userguid = '' and objectguid = '5c2142000453e9b1159e677b04577dd9' and operationtype = 'Bundle.Install'] [] []
[DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [Status Library] [] [SetStatus: sql= insert into zstatus(timestamp, userguid, objectguid, source, objecttype, operationtype, operationstatus, successcount, failurecount, objectversion ) values ( 634829756180156250,'','5c2142000453e9b1159e677b045 77dd9',1,'B','Bundle.Install','S',6,1,0)] [] []
[DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [ZIconMod] [] [Received exception closing the activityIndicator to user session (999): Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
at System.Runtime.Remoting.Channels.Ipc.IpcPort.Conne ct(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
at System.Runtime.Remoting.Channels.Ipc.ConnectionCac he.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
at System.Runtime.Remoting.Channels.Ipc.IpcClientTran sportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
at System.Runtime.Remoting.Channels.BinaryClientForma tterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at (0):
at System.Runtime.Remoting.Proxies.RealProxy.HandleRe turnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateI nvoke(MessageData& msgData, Int32 type)
at Novell.Zenworks.NotifyIcon.Remoting.IZenIconUIServ er.CloseActivityIndicator(String guid, String status, String name)
at Novell.Zenworks.NotifyIcon.Module.ZenNotifyIcon.Cl oseActivityIndicator(Session session, String guid, String status, String name)] [] []
[DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9] [] [BundleManager] [] [Finished Process Action for Item: GroupWise 2012 Installation or Upgrade Action: INSTALL Result: True] [] []
[DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [From IconUtils.cs)] [] []
[DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [Required icon found, sending for overlay] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [Evaluating System Requirements for GroupWise 2012 Installation or Upgrade; GUID: 5c2142000453e9b1159e677b04577dd9] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirement Handler] [] [Comparing actualValue: 5.1.2600.196608 with expectedValue: 5.1.2600.196608 for compareOperator: GreaterEquals returned True] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [First requirement returned True] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Got architecture - 32] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Expecting architecture - 32] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [ArchitectureRequirementHandler] [] [Returning - True] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [AND-ing result(True) with previous results (True) yields True] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [Requirements Module] [] [First requirement returned True] [] []
[DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25] [] [BundleManager] [] [System Requirements Passed for GroupWise 2012 Installation or Upgrade] [] []I don't have GW for any type of testing, but what I would do for testing
is .......
Replace the Install.bat with just calling CMD.exe
then from the command prompt
walk through the commands in the install.bat one by one to see what is
happening............
On 9/11/2012 12:06 PM, OakFND wrote:
>
> Hello There,
>
> I have an issue to deploy the GroupWise 2012 client via Zen 11.1 (Had
> no prob to deploy GroupWise 8)
>
> I followed the well-done tutorial from youtube ('Novell GroupWise 2012
> Deployed Using ZCM 11 SP1 Part 1 - YouTube'
> (http://www.youtube.com/watch?v=V9Wa2ETf7ag)) or/and the guide
> (http://www.novell.com/feeds/nih/wp-c...5/GW06_lab.pdf)
> but it seems that it does not want to work as shown. I googled to see if
> anyone had the same prob but it seems not to be the case. So I assume I
> missed something but I do not find the trick.
>
> Everything works until it launches the install.bat as when I get the
> notification that it has completed the installation the only thing I see
> is that no GroupWise 2012 is installed at all and that GroupWise 8 has
> been uninstalled. During the process I see that it copies the first 800
> files in Program Files\novell\groupwise but just before telling me that
> he finished all files are removed. I did not do the step where it should
> launch GroupWise.
>
> I re-created a bundles and tried to install GroupWise 2012 as GroupWise
> 8 but it did not work.
>
> It is really frustrating as I really need it to be deployed and that it
> was meant to be simple.
>
> I would be grateful if anyone could help on that.
> Thank you in advance,
> OAKFND
>
> PS: Here is a part of the log on the workstation
>
> [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9] []
> [LaunchActionHandler] [] [Exiting ProcessAction] [] []
> [DEBUG] [09/11/2012 17:53:37.906] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Action handler Launch Action finished processing
> Launch GroupWise Installation successfully.] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Caching action set
> 5c2142000453e9b1159e677b04577dd9] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade
> (INSTALL)] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ ActionSet count: 7] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ ActionResult count: 6] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [WorkSet using session id (ZenName):
> b683416a643739f118900002b3dfe2fa] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [WorkSet using session id (ZenName):
> b683416a643739f118900002b3dfe2fa] [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa]
> [] []
> [DEBUG] [09/11/2012 17:53:37.921] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9)
> DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
> UserContext{_LocalId=SYSTEM;
> _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
> [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
>
> [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9)
> PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99,
> UserContext{_LocalId=SYSTEM;
> _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
> [DEBUG] [09/11/2012 17:53:37.937] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program
> Files\Novell\ZENworks\cache\zmd\ZenCache\3b17bbd3-f015-4c92-a7e0-c337a893ab0f
> in 10 ms] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade
> as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Processing action: Delete GroupWise2012
> Directory] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Caching action set
> 5c2142000453e9b1159e677b04577dd9] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [Caching work set GroupWise 2012 Installation or Upgrade
> (INSTALL)] [] []
> [DEBUG] [09/11/2012 17:53:37.953] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ ActionSet count: 7] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ ActionResult count: 7] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [WorkSet using session id (ZenName):
> b683416a643739f118900002b3dfe2fa] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [WorkSet using session id (ZenName):
> b683416a643739f118900002b3dfe2fa] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [ Using session id: b683416a643739f118900002b3dfe2fa]
> [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9)
> DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
> UserContext{_LocalId=SYSTEM;
> _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 5 ms] [] []
>
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9)
> PutObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99,
> UserContext{_LocalId=SYSTEM;
> _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
> [DEBUG] [09/11/2012 17:53:37.968] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [Type: Novell.Zenworks.ActionManager.WorkSet] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9) PutObject returning C:\Program
> Files\Novell\ZENworks\cache\zmd\ZenCache\d4bb83fe-6151-42fe-9656-c2c35f55c0d2
> in 9 ms] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [Cached workset GroupWise 2012 Installation or Upgrade
> as WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Updating status for set
> 4c7cc2c6e2cbf85974fdc7eb690c1f99] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [Work set completed. Deleting cached action set
> 5c2142000453e9b1159e677b04577dd9] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [Deleting work set GroupWise 2012 Installation or
> Upgrade (INSTALL)] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [WorkSet] [] [WorkSet using session id (ZenName):
> b683416a643739f118900002b3dfe2fa] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9)
> DeleteObject(WorkSet4c7cc2c6e2cbf85974fdc7eb690c1f 99,
> UserContext{_LocalId=SYSTEM;
> _RemoteId=b683416a643739f118900002b3dfe2fa}) called] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ZenCache] [] [(Thread 9) DeleteObject returning True in 4 ms] [] []
>
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ActionManUtil] [] [DestroyDauSession countdown reset to 500000
> milliseconds for session 6088812] [] []
> [DEBUG] [09/11/2012 17:53:37.984] [400] [ZenworksWindowsService] [9]
> [] [ActionManager] [] [GetResultSetRequest returning DO_NOTHING] [] []
> [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
> [] [Status Library] [] [SetStatus: srchSql= select successcount,
> failurecount from zstatus where userguid = '' and objectguid =
> '5c2142000453e9b1159e677b04577dd9' and operationtype = 'Bundle.Install']
> [] []
> [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
> [] [Status Library] [] [SetStatus: sql= insert into zstatus(timestamp,
> userguid, objectguid, source, objecttype, operationtype,
> operationstatus, successcount, failurecount, objectversion ) values (
> 634829756180156250,'','5c2142000453e9b1159e677b045 77dd9',1,'B','Bundle.Install','S',6,1,0)]
> [] []
> [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
> [] [ZIconMod] [] [Received exception closing the activityIndicator to
> user session (999): Failed to connect to an IPC Port: The system cannot
> find the file specified.
>
>
> Server stack trace:
> at System.Runtime.Remoting.Channels.Ipc.IpcPort.Conne ct(String
> portName, Boolean secure, TokenImpersonationLevel impersonationLevel,
> Int32 timeout)
> at
> System.Runtime.Remoting.Channels.Ipc.ConnectionCac he.GetConnection(String
> portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
> at
> System.Runtime.Remoting.Channels.Ipc.IpcClientTran sportSink.ProcessMessage(IMessage
> msg, ITransportHeaders requestHeaders, Stream requestStream,
> ITransportHeaders& responseHeaders, Stream& responseStream)
> at
> System.Runtime.Remoting.Channels.BinaryClientForma tterSink.SyncProcessMessage(IMessage
> msg)
>
> Exception rethrown at (0):
> at
> System.Runtime.Remoting.Proxies.RealProxy.HandleRe turnMessage(IMessage
> reqMsg, IMessage retMsg)
> at
> System.Runtime.Remoting.Proxies.RealProxy.PrivateI nvoke(MessageData&
> msgData, Int32 type)
> at
> Novell.Zenworks.NotifyIcon.Remoting.IZenIconUIServ er.CloseActivityIndicator(String
> guid, String status, String name)
> at
> Novell.Zenworks.NotifyIcon.Module.ZenNotifyIcon.Cl oseActivityIndicator(Session
> session, String guid, String status, String name)] [] []
> [DEBUG] [09/11/2012 17:53:38.015] [400] [ZenworksWindowsService] [9]
> [] [BundleManager] [] [Finished Process Action for Item: GroupWise 2012
> Installation or Upgrade Action: INSTALL Result: True] [] []
> [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25]
> [] [BundleManager] [] [From IconUtils.cs)] [] []
> [DEBUG] [09/11/2012 17:53:38.109] [400] [ZenworksWindowsService] [25]
> [] [BundleManager] [] [Required icon found, sending for overlay] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [BundleManager] [] [Evaluating System Requirements for GroupWise 2012
> Installation or Upgrade; GUID: 5c2142000453e9b1159e677b04577dd9] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [Requirement Handler] [] [Comparing actualValue: 5.1.2600.196608 with
> expectedValue: 5.1.2600.196608 for compareOperator: GreaterEquals
> returned True] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [Requirements Module] [] [First requirement returned True] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [ArchitectureRequirementHandler] [] [Got architecture - 32] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [ArchitectureRequirementHandler] [] [Expecting architecture - 32] []
> []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [ArchitectureRequirementHandler] [] [Returning - True] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [Requirements Module] [] [AND-ing result(True) with previous results
> (True) yields True] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [Requirements Module] [] [First requirement returned True] [] []
> [DEBUG] [09/11/2012 17:53:38.125] [400] [ZenworksWindowsService] [25]
> [] [BundleManager] [] [System Requirements Passed for GroupWise 2012
> Installation or Upgrade] [] []
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
GroupWise 2012 Post Office crashes.
2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6Originally Posted by ellisck
2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6
There are several known issues with crashing POA's. Make sure you'll be able to send a core dump and supportconfig to Novell, open an SR and they can provide you with an updated build in which the crashing should occur much less frequently. -
Fms live stream server stops sending data around 4+hrs
Hi,
I am having some issues with fms servers livestream connection. My rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server. Are there any other that client needs to send back to server? It would be greatly appreciated for any pointers and help. Thanks.Updates:
An interesting observation is that the server stops transmitting data when server-to-client bytes reaches ~4G. The number sounds too much like a system resource limitation. It is a live stream and it is not being recorded so I am not sure where is the 4G limitation coming from. FLVCACHE_MAXSIZE is for recorded stream, I think, and it is set to the default 500MB.
Also, in the access log the check point for connect-continue and play-continue keep showing status of 100, which is supposed to be "Waiting for the application to authenticate.". Is this correct? The connection is successfully connected and play command is successful as shown in the access log. swfVerification is disabled in application.xnl. what does the server waiting for in respect to authentication?
Below is the log:
connect-continue
session
2012-03-22
01:51:24
Eastern Daylight Time
10.200.4.224
10.200.4.172
1176
1
44
_defaultRoot_
_defaultVHost_
live
_definst_
0
100
10.200.4.224
rtmp
rtmp://10.200.4.172/live
rtmp://10.200.4.172/live
file:///mac.flv
LNX 9,0,48,0
4702111234558869871
3183
3840850027
normal
file:///mac.html
play-continue
stream
2012-03-22
01:51:24
Eastern Daylight Time
livestream
10.200.4.172
1176
1
44
_defaultRoot_
_defaultVHost_
live
_definst_
18044
100
10.200.4.224
rtmp
rtmp://10.200.4.172/live
rtmp://10.200.4.172/live
file:///mac.flv
LNX 9,0,48,0
4702111234558869871
3183
3840850027
normal
livestream
rtmp://10.200.4.172/live/livestream
rtmp://10.200.4.172/live/livestream
flv
18085866
0
3829693036
1
file:///mac.html
-1
-1.000000
Any pointers would be greatly appreciated. Thanks. -
I have a user who is using Groupwise 2012 and when she composes a new message the Spell Check button stays greyed out. She has her settings set to: Tools/Options/Environment/General. "Check spelling as your type" and "Check spelling before send" are checked. I couldn't find any article related to this issue for this version. Any thoughts?
In article <[email protected]>, Fishindude64
wrote:
> The user had uninstalled, run Cleanit, and then reinstalled the GW
> client. Initially for the first few days the spellchecker worked but
> now it is greyed out again. Any more thoughts?
>
That sort of behaviour would have me running a full cleaning of temp
files and a defrag. Sometimes a funky temp file gets stuck that
interferes with a program, and the defrag affects the timings of things
enough to clear a number of timeout.s
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php?userid=75037
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks! -
My IPhone 5s has stopped sending e-mails suddenly.
Yesterday afternoon my iPhone stopped sending my e-mails via aol. I can receive but not send. I have tried deleting and reinstalling the e-mail account, I have reviewed the sending server as suggested by some other support pages. I am at a lost as to why and need some help, this is also affecting my iPad. Thanks in advance
Check first whether the you can send emails using web (Either on Safari App or try it on a computer)
If it doesn't work in webmail ,there might be an issue with the email account.
If its working , you can try adding the account to outlook on your computer and then sync the Email settings thru iTunes.
If its a windows computer which you are using you'll get Info tab in your device page.
Click on Info and then select Sync Mail and then Apply. -
I can't send photos from camera roll iphone4 to a email address. It just stopped sending photos.
i can't send photos from camera roll iphone4 to a email address. It just stopped sending photos.
iPhoto Menu -> Preferences -> Accounts ->
Delete and recreate your email settings.
It's only difficult if you get all emotional over tiny things and don't stop to look for answers first. I find Macs very simple to use. -
Welcome to the new GroupWise 2012 forums. This is the place to discuss Novell's
newest GroupWise offering.
To begin with, I suggest watching the GroupWise 2012 keynote presentation
from the recent BrainShare conference: http://www.youtube.com/watch?v=Q2ZSN2CK8hw
You can read all about GroupWise 2012 and see more videos, including a demo:
http://www.novell.com/products/groupwise/
Thanks for adding your experiences, knowledge, and questions here in the
Novell Forums.Novell wrote:
> Welcome to the new GroupWise 2012 forums.
This deserves some celebration!
http://www.caledonia.net/blog/?p=514
Danita
Novell Knowledge Partner
Upgrading to GroupWise 2012? http://www.caledonia.net/blog/?p=514
http://www.caledonia.net/gw12upg.html -
How do I get Apple to stop sending me email?
I know this isn't the right forum for this question, but I didn't see one that seemed relevant.
My first question is regarding these discussion boards. I posted a question here (in the Using iPod Shuffle area) and since then, I am getting an email every time somebody posts to this area.
The email has instructions on how to stop this from happening, they tell you to log in, go to "My Subscriptions", and in the Subscribed Categories area, select the delete option. However in the Subscribed Categories area, it shows zero subscribed categories, and there is no delete option.
Has anybody else run into this and found a way to fix it?
Second, since I am vaguely on the topic anyway, maybe somebody will know this one.
Since I purchased something from the iTunes music store, I have been getting ads by email from them. I told them not to send me ads at the time, but they are sending them anyway. I have replied back to the emails begging them to stop sending me ads, but they ignore this.
I really want to keep my email account as spam-free as possible.
Has anybody else run into this and figured out how to make them stop?
Thanks for any help.Look in "My Settings" to find the .... setting ... which prevents your from automatically subscribing to each one you either originate or respond to.
FYI, general questions on use of the Discussions themselves are handled in a separate forum — Discussions Feedback.
One way to manage/change your contact preferences is to log into myinfo.apple.com and change whatever you want or need to in there. If there are separate things which come from ITMS that aren't controlled from that page, and you can't find it discussed in the iTunes help or support pages or in its own menus somewhere, then you really should be asking in the ITMS forums instead of the iPod Shuffle one. -
Stop Sending and Receiving Emails for the employee which is no longer exist
Exchange 2007
Hi There,
I have lot's of mailboxes in my exchange server which their users are not with us anymore.
I would like to stop receiving any emails for them.
I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
information.
Any idea how to:
Stop sending / Receiving email for these type of users?
OR
Changing the respond message?
Thank you in Advance for your timeYou have a couple options. Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers.
This would prevent any information regarding you Exchange servers being returned.
If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox. Refer to this article on creating a DSN:
http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx -
Sender JDBC channel stop send messages
Hi,
We have a sender JDBC scenario which is working correctly time ago.
However, sometimes this channel stop sending messages although the Adapter Monitor shows that they regularly execute the polling interval.
We have confirmed that there isn't any connection from XI to target BD.
In other ocasions, we are required to restart XI and, after that, this scenario works without any problem.
What could be the cause?
How to solve it?
thanks, in advance
CarmeThis is rather strange.
A few of my observations -
1. When the sender jdbc adapter polls , and there is no data matching the select query, you will still see a message id in Comm Channel Monitoring but with no hyper link.
2. The actual message id / message is created only if there is data in the database and also the hyper link is enabled.
3. If you are confident that the data is being commited on the database and that it is XI not pulling the right data, one issue might be - driver issues. Can you check if you have the right compatible drivers for your database on XI server - is there a new'er driver available?
We hit a similar issue with JMS adapters and we learnt that the JMS server had been updated as a result of which a new driver had to be installed which we did not until we hit intermittent problems like these.
Hope this helps
Regards
Bhavesh -
I have a iPhone 4S running on iOS 6.1 and it stopped sending picture texts to all my non iPhone friends/family
Check Settings > Messages and make sure MMS Messaging is "On".
Check Settings > General > Cellular and be sure Cellular Data is "On". -
Composite AV connector stopped sending video
my composite AV connector stopped sending video....... audio still works but NO video. I even exchanged the cable for new one. Any advise??
wolverinekane wrote:
my composite AV connector stopped sending video....... audio still works but NO video. I even exchanged the cable for new one. Any advise??
Where did you get the new cable? New cable or another one you had?
There have been reports of problems with cables in 8.x.
I upgraded to ios8 and can no longer connect my iPad to the projector in my classroom. -
My iPad 2 has suddenly stopped sending emails.
My iPad 2 has suddenly stopped sending emails. It puts them in the outbox but that's as far as they go. I've tried turning off ect but no joy. It puts them in the outbox but thats as far as they go.
The restrictions should have no bearing at all as to why mail is not being sent. It will prevent you from making changes to the emai account, so I don't know how you were able to try what I suggested if you can't get into your mail settings.
As for the 10 attempts ...... You get as many tries as you need with that passcode. But the catch is that if you cannot remember it and you need to get into the settings, you have to restore your iPad back to factory settings and start all over again. The only way that you can use a backup is if the backup does not contain that passcode. If you restore from a backup that has the passcode in or, you will jut end up in a never ending loop.
So after having said all of this I would have to assume that you tried my suggestion before you locked yourself out of the settings.
Maybe you are looking for
-
Matrix report not printing report totals
I've created a 'Matrix with Group' report using the wizard that works great. It prints the sub-totals for each product at the end of each group, but won't print a grand total for each product at the end of the report - just displays a grand total for
-
Error while querying ADF form by saved criteria - MDS activated project
Hi, I have a project with MDS activated through database. I'm able to save the customized query criteria and retrieve in the session the criteria is created. But if I log off the session and open another session, I only see the saved criteria name in
-
Problem with Stacked Columns in Business Graphics
Hi, Has anyone used the stacked columns chart type in business graphics? Am facing a problem with this. I am using the SimpleGraphics example demo with 2 dataseries, the values ranging from 0-10. It works fine if the chart type is Columns (this is
-
Ipod wont pop up when itunes open. ipod asks to trust computer. what the **** happen
ipod wont pop up in itunes. asks to trust computer ***?
-
Manual login to Non Default DB with SSO enabled
Hi, I logged the following through SAP Support, but was advised that Single Sign-On was functionining as designed. The issue is that the non-default database does not have a manual login page, whereas the default database does. This is an issue for